File Transfer SAP to MQ series

Hi experts,
We are having a SAP program which creates a file abc.txt. We want to push this file from SAP to a destination which is an MQ series directly. Please lets know the steps for this. Please provide any documents if any.
Regards
Vimal

Hi,
Here are the options:-->
1. You can send the file thru FTP to MQseries destination
2. Create a RFC function module and read the data and send to MQseries destination
3. Using OPEN DATASET you read the file and write to a MQseries drive.
You need more info let me know.
a®s

Similar Messages

Regarding file transfer SAP(SD)

hi everybody
I would like to know how files transfered from non SAP implementing to newly implementing SAP(SD)

Dear Shaik,
<b>If you are not using SAP XI</b>:
You will have to develop a custom program/LSMW to transfer the data from your legacy system to SAP system (SD Module in your case).
There are two ways by which you can achieve this.
1. Run your program/LSMW as a batch job with some frequency (Lets say daily, weekly etc).
2. Execute the program/LSMW in foreground (Manual).
<b>If you are using SAP XI</b>:
You will have to develop an interface to transfer data through XI from legacy system to SAP System.
Reward points if this is helpful.
Regards,
Naveen.

.PDF file transfer(SAP XI ) along with file name to SAP R3

I would like to transfer a .PDF file along with its file name to target system.I need to have target structure like,
<Target>
    <field1>
    <Field2>
/Target>
Field1should be mapped to file name( i can do this by using dynamic configuration and a UDF).
Field 2 should me mapped to .PDF imae (.ie) i need tp pass the whole image to one target field
How can i do this.
Please suggest.

Hi as mentioned by you the structure is
<Target>
    <field1>
    <Field2>
</Target>
Field 1 Contains The dynamic File name UDF
Just make This File name which is sent Thru Source side as "Filename.PDF" to be passed to the target end
For example If the File name is XYZ
Field 1 has XYZ--
Pass The Field 2 as "XYZ.pdf" (i.e. File name Followed By .pdf as extension(Field1.pdf))

How to transfer file from sap server to PDM server using open FT??

Hello Sap Guru's
I want to Trasfer a file with all supplier information from SAP server to PDM server(Thirdparty) system Using Open FT ..How can I transfer ???
Please let me know the answer??
Thanks In Advance
Preethi

Hi Preethi,
I think it is not possible to transfer a file from SAP to PDM using open FT.
Using RFCs, we can do the transfer.
Other option is the file can be downloaded into UNIX. And from there using a shellscript we can transfer the file from UNIX to PDM or if your PDM has the option to grab the file from UNIX that will also work.
Hope this helps.
Please reward if helpful.
Thanks,
Srinivas

How to Transfer SAP data to perticular Worksheet in Excel file

Hi,
I have a requirenment to Transfer SAP data to Perticular WorkSheet in an Existing Excel file, i tries using EXCEL_OLE_STANDARD_DAT but this FM deletes all Existing worksheets in the Excel file and creates only one new worksheet and adds data to it.
Please Help me to solve this issue.....
Thanks
Srilatha

hello,
what kinf of data do you need to transfer?
master data
or
payroll results?
regards
stefan

SAP PI ftp FIle transfer one to one with the same filename

Hello all,
maybe sombody ask the same in this forum, but couldn't find any topic regarding these.
Okay:
We have a scenario which have to pick up a txt file from a folder and to deliver to another folder
outside. The file transfer itselfs isn't a problem and works propertly, but we need the same file-
name for the outgoing file. Unfortunaltey we have huge different filenames..
So, my question would be, what for possiblities we have to sure, that if we can deliver the
file which the same filename as we have in the orginal (source) filefolder.
e.g. file named in source called TEST.123 in the destination should be also TEST.123.
The next file called TEST123.abc should be also in the destination TEST123.abc.
Thanks

Hi friends.
I don't know about if you need still any help. But i think it will be useful for another people who have encountered that problem and looking for the solution.
The solution is pretty simple for case if you are going to some file by scenario FTP - to - FTP without interface mapping. I was able to create simple example ant put it on my site to let you use the portable short instruction with screen shots and highlighted marks that help you understand it more clear. Indeed you don't need any udf if you wish to repeat that example in your real scenario. Link is HERE
Shortly you have to do the next:
1) for the sender adapter in tab "Advanced" switch on the check-box "Set Adapter Specific Attributes" and check that "File name" is switched on as well.
2) for the receiver adapter you have to repeat step 1 as well. Plus you have to change setting on the tab "Processing". On that tab you need to change "File Construction Mode" into "Create" and than you have to switch on the check box named as "Overwrite Existing File".
That's it.
Thank you, i hope that is help.
Sincerely, LukCAD.

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

Error no. 4 in SAPGUI during graphic call or file transfer.

Hi,
In the landscape there are still 46b sap version, i have some functional queries that when i executes go to the sap graphic screen and it throws with no output. I understand that that it works in ECC version but not for 46b.
This issue is related to SAPGUI, as i have the latest sapgui installed 710 that works well for ECC.
But if i input the parameter in sap 46b system , and execute to get the graphic chart i get this:
The Generation of Graphs for Stock Movements in the MC49 Transaction.
When you call a hierarchy graphic, the following error messages are displayed
1. 'Too much data in a table or too many tables defined
2. E4: error writing to XC pipe: child #1 ( id: STAT ); reclen12
3. Error no. 4 in SAPGUI during graphic call or file transfer.
I have also look in to note 316232, 361222, 96885. for this but this says to upgrade the sapgui,which is already in.
What is the solution for this.
Regards,
Chetan.

Take a look at this thread. This may provide you some guidance as it appears that Error has been encountered before.
[Link Here|Error no. 4 in SAPGUI with Graphics call or file transfer;
Regards,
Zecher

Sending XML file from SAP to Windows Based file server with FTP function

Hi Gurus,
We are using SAP BW 3.0B version.
I need to convert data in ODS to XML format and send this XML file to remote server which is not a SAP application server, it is just a Window Based file server with FTP function..
By writing some ABAP code I have converted ODS data into XML format (which gets saved in my local system)
(Is that I need to put this file in Application Server to send it to the other servers? )
Now the thing is how I can send this file to that Windows Based file server.
plz suggest me.... what can be done......
Thanks in Advance
Madhusudhan
Edited by: Madhusudhan Raju on Dec 3, 2009 4:25 AM

I dont think the above code support windows OS. Because I always execute this script via UNIX.
I think you can try this option, go to command prompt, goto the destination path where you have an XML file using cd....
ftp (destination servername), specify the username and password.
afterthat, use the command put and filename.
check whether the file had reached destination successfully or not.
For automation purpose, you can use the following script like
ftp: -s: test.txt (servername)
In test.txt,
UserName
Password
bin
cd /files
put file.xml
bye
Also, you can check in SM69, there will be some SAP external commands to automate the file transfer.
Thanks
Sat
http://support.microsoft.com/?kbid=96269

Dynamic title for Chart created by an xml-file in SAP ChartDesigner

Hello everybody.
I created an xml-file with SAP ChartDesigner for using it in my abap program. I import this file as a MIME-Object.
Everything works fine, i declared my charts and all my values.
But now I need a dynamic title on the top.
And know that I can give a title in my xml. But it's not dynamic.
I looked into the xml file and the path for the title is:
SAPChartCustomizing
Elements
ChartElements
Title
and then Caption.
p_ixml_doc = g_ixml->create_document( ).
l_encoding = g_ixml->create_encoding( byte_order = if_ixml_encoding=>co_little_endian character_set = 'utf-8' ).
p_ixml_doc->set_encoding( l_encoding ).
l_chartdata = p_ixml_doc->create_simple_element( name = 'SAPChartCustomizing' parent = p_ixml_doc ).
l_elements =   p_ixml_doc->create_simple_element( name = 'Elements' parent = l_chartdata ).
l_chartelements = p_ixml_doc->create_simple_element( name = 'ChartElements' parent = l_elements ).
l_title = p_ixml_doc->create_simple_element( name = 'Title' parent = l_chartelements ).
l_element = p_ixml_doc->create_simple_element( name = 'Caption' parent = l_title ).
l_element->if_ixml_node~set_value( 'QRK-Mittelwert' ).
In my opinion, it's the right path :/
My other values i declare like this.
l_series = p_ixml_doc->create_simple_element( name = 'Series' parent = l_chartdata ).
l_series->set_attribute( name = 'label' value = 'TO' ).
l_series->set_attribute( name = 'customizing' value = 'Series1' ).
loop at gt_mw into gs_mw.
    lv_tabix = sy-tabix.
    l_point = p_ixml_doc->create_simple_element( name = 'Point' parent = l_series ).
    l_element = p_ixml_doc->create_simple_element( name = 'Value' parent = l_point ).
    l_element->set_attribute( name = 'type' value = 'x' ).
    l_element->if_ixml_node~set_value( lv_tabix ).
    l_element = p_ixml_doc->create_simple_element( name = 'Value' parent = l_point ).
    l_element->set_attribute( name = 'type' value = 'y' ).
    l_element->if_ixml_node~set_value( '35.00' ).
endloop.
It works...and i already checked this solution for my title, but it didn't work.
I call the xml file with the method cl_wb_mime_repository:
CALL METHOD cl_wb_mime_repository=>load_mime
    EXPORTING
      io              = lv_io
    IMPORTING
      bin_data        = lt_xmlr
    CHANGING
      language        = sy-langu
    EXCEPTIONS
      no_io           = 1
      illegal_io_type = 2
      not_found       = 3
      error_occured   = 4
      OTHERS          = 5.
CHECK sy-subrc = 0.
*-- Convert raw to xstring
CREATE OBJECT lo_conv.
LOOP AT lt_xmlr INTO ls_xmlr.
    CALL METHOD lo_conv->convert
      EXPORTING
        inbuff    = ls_xmlr
        outbufflg = 25000
      IMPORTING
        outbuff   = lv_xstr.
    CONCATENATE p_xml lv_xstr INTO p_xml IN BYTE MODE.
Maybe somebody can help me.
Thanks a lot.

I got it!
This thread helped me.
[http://forums.sdn.sap.com/thread.jspa?threadID=1343796|http://forums.sdn.sap.com/thread.jspa?threadID=1343796]

Downloading a file from SAP (tcode FDTA) onto the disk drive of the server

Hi,
We are using the transaction FDTA to download a file to the server. This server is the same one on which the SAP system is hosted the download we have to specify the destination path as
server1\folder1\filename.txt.
The file is downloaded successfully every time.But we need to know which userID was used by SAP to download the file. For this we have switched on the Windows feature of Auditing. This gives us the username which has created the file on the drive.
Here it gets complicated, as each time we see a different username. Sometimes it is the user using which we logged on to the windows OS (terminal server from where we fire the sap logon pad) and other times it shows the user as sidadm.
We need to know how this file transfer process takes place or if there is someway we can ensure that only one userID is always associated with the file download.
Regards,
Rohan.

Hi,
Thank you Markus and BAIGSA. But the user that i see associated with the file (we get this information via Windows auditing) is the user which is used to login to the terminal server.
Now to explain in detail we first login to the terminal server with domain user ID (userA for e.g.). From there we are able to access the SAP R/3 as well as the OS of the SAP systems. So after I login to this terminal server I open the SAP logon pad and logon to the SAP system from where I fire the tcode FDTA mentioned above.
It seems the user I used to logon to the terminal server (userA) is associated with the file (as seen in Windows auditing) and not the sidadm or the SAPserviceSID user.
Is this happening only because I am using a terminal server to hop onto the SAP system?
Regards,
Rohan.

I can´t edit the text files with SAP BODS 3.2

Hello
I can not edit some text files 9-20 megabytes to replace two words in each file, the source is a text file and the same destination but with different name, because with the same name have been unable . My idea is to remove the original and stay with the new performing edition but that if he does , let me file this way:
SALES_ORDERS_FULL_20140223_150051_006.xml ( ORIGINAL )
should leave it with me so : SALES_ORDERS_FULL_20140223_150051_006.xml _OLD (AMENDED )
but strangely leaves me so :
MICROSOFT_SQL_SERVER_KCC-BI_REPO_KHSA_XI_REPO_KHSA_XI_1543_5434_2_3_Long_INVOICES_INCREMENTAL_20140225_034004_001_xml_dat.txt (not deseased)
The type of data you use is long since varchar not allow me because it cuts my data file , use varchar (50000000) but takes the information and short .
I am using long data type , modify the file and I pass the name of the text files of sap bods for global variables. They are a series of files that are called by a while loop
Thanks for your answers
regards

HIr
Yes, first I convert long_to_varchar for edit, and convert varchar_to_long.
I edit before before and later
Thanks

Getting error in file transfer from one system to another system

Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.

Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

File to file transfer

hai
i need the steps to be done for the scenerio file to file transfer,
as if i am transfering a file from one R/3 to another R/3 system.
what are the configuarion that is to be done for it?
plz send me the detail steps.
thx in advance. its urgent.

Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File

File Transfer SAP to MQ series

Similar Messages

Maybe you are looking for