File transfer speed with Ext. HDD very slow

Hi,
Got the snow leopard upgrade loving it but i recently discovered the it takes longer to copy files to and from my WD HDD's all 4 of them, connected via FW800, FW400 and 2 USB ports, the FW800 is the slowest. i ran some test tried coping random 1GB files and it took 7 mins but in 10.5 it usually takes less than 2 mins. i have tried restarting, disconnecting the drives and unplugging nothing seems to work. anyone got any clue why the speed suddenly dropped.
i use a 2.4GHz intel core 2 duo iMac

You posted this in the Powerbook discussion forum. You may want to post it in the Power Mac G5 area, located at http://discussions.apple.com/category.jspa?categoryID=108

Similar Messages

Very slow network file transfer speeds with WRT310 + Powerline PLS300

Hi guys-Thanks for looking!
I have Charter hi-speed (10MBS) with my wireless N router (WRT310). Connected to my router is the PLE300 Linksys powerline adapter. I have two PLS300 powerline adapters. One feeds my computer and my wife's computer in the den and the other feeds the playstation, xbox, NAS Black Armor media server in the media room.
In running speed tests online, I get >10 MBS on both ends of the powerline adapters so surfing the internet is very fast on both ends. I also have very fast file transfers from my wife's computer to my computer across the same PLS300 adapter
However, in transfering files to my media server from my computers, I get speeds of 500 kbs. If I try to stream video files (non-HD) to my PS3, the video stutters to where it is unwatchable. I have also tried to bypass the powerline adapter by just using a wireless N gaming adapter and that yielded similar slow results.
I am running Windows 7 on both computers. I have removed the firewalls and McAfee.
Again, thanks for looking and happy new year!

Reduce the MTU to 1350 on the router and check if that helps...

Slow large file transfer speed with LaCie 1T firewire 800 drives

I am transferring two large files (201gb and 95gb) from one LaCie 1T firewire external drives to another one (using separate connections to a PCI Express firewire 800 card in my Quad G5. The transfer time is incredibly slow – over for hours for the 201gb file and over 2 hours for the 95gb file.
Does anyone have any ideas why this is so slow or what I might try to speed up the transfer rates?
Thank you.
G5 Quad 2.5 8GB DDR2 SDRAM two SATA 400GB Mac OS X (10.4.5)

You posted this in the Powerbook discussion forum. You may want to post it in the Power Mac G5 area, located at http://discussions.apple.com/category.jspa?categoryID=108

Increasing file transfer speeds with multiple network adapters?

Hello,
I want to move gigabytes of data from my PC to my PowerBook G4 at a faster rate. My PC has 802.11g WiFi and 100Mb/s ethernet and I've got my Airport's WiFi and 100Mb/s ethernet on my laptop so I'd like to somehow combine these two network interfaces to speed up my file transfers. How can I do this?
I've read a little about 802.3ad link aggregation, but AFAIK this applies exclusively to 802.3 ethernet ports.
Thanks,
Shaun
PowerBook G4 Mac OS X (10.3.9)

Does your PC have a FireWire port? you can use IP over FireWire for better throughput than the wired ethernet.
You can't use link aggregation in this case since it requires multiple interfaces of the same type (e.g. two gigabit ethernet cards), but you cannot mix media such as AirPort and Ethernet.
The alternative would be to install a gigabit ethernet card in your PC. You'd at least then get gigabit ethernet speed between the two devices which is also a step up.

Local file transfer speed slow on E1200

On a local file transfer (computer to NAS or NAS to computer) my file transfer speed with the E1200 is way too slow. I would expect the Wireless N speed to be at least 54mbps (megabits per second), which would be equivalent to 9 MegaBytes per second.
In practice the speed of transfer appears to be at 8mbps (1 MegaByte per second). Here is a screen shot:
The speed is the same whether I copy from the computer (on a wireless N link) to the NAS, or from the NAS (on a 100Mbit ethernet port on the E1200) to the computer. The NAS is brand new, auto configured to a RAID-1 setup with two new drives.
Anyone know why this is? is the encryption (WPA2-PSK/AES) slowing down the transfer? The same problem occurred with copying a folder of photos as with copying this large file. I don't think I can upgrade the firmware on my device, as I have the first version of the E1200.
Solved!
Go to Solution.

Sabretooth --
There is no option to set the Qos to zero. I can set it to "auto" in which case the number has no effect.
I could set it to manual but it restricts me to a range as you can see from the graphic.
In case you are wondering, my internet speed is 10Mbps downstream, 5Mbps upstream. So I am getting the same speed for the internet that I am getting for a local transfer.
The next troubleshooting step is to bypass the wireless and hook my PC to the router. I will let you know if that makes a difference.

Slow file transfer speed on OS X / Windows LAN

I have a Mac Mini with OS X Server (Yosemite) on a network of 5 Windows 7 PCs, the server hosts FileMaker Server 13 and also some files in a shared folder.
I notice the file transfer speed when copying a file from one PC up to the server's shared folder is around 350KB/second, is this an acceptable speed? how could I improve it?
Thanks for your help.

I'm having the same issues.. I recorded a bunch of video with the 4s.. now i'm copying them to my windows 7 pc with it peaking out at 900KB/sec. My corsair thumb drive in the same port gets 5-10x this speed. any luck getting faster speeds?

File transfer speed when on battery power

Hey there - I've noticed that my file transfer speed is ridiculously slow when i'm not plugged in to a power source. Even when my battery is fully charged it's super slow. This happens not only when I'm uploading files from a memory card to my computer but when I'm attaching files to an email, or even sending an email. I've asked other mac users and they say this is not the norm for their machines....any ideas?
thanks!
Sunny

additionally, you can disable power menagement for your wireless card completely through iwconfig's power option. I suggest you read the manpage for iwconfig, I have quotes the 2 related options for you.
txpower
For cards supporting multiple transmit powers, sets the transmit power in dBm. If W is the power in Watt, the power in dBm is P = 30 + 10.log(W). If the value is postfixed by mW, it will be automatically converted to dBm.
In addition, on and off enable and disable the radio, and auto and fixed enable and disable power control (if those features are available).
Examples :
iwconfig eth0 txpower 15
iwconfig eth0 txpower 30mW
iwconfig eth0 txpower auto
iwconfig eth0 txpower off
power
Used to manipulate power management scheme parameters and mode.
To set the period between wake ups, enter period 'value'. To set the timeout before going back to sleep, enter timeout 'value'. You can also add the min and max modifiers. By default, those values are in seconds, append the suffix m or u to specify values in milliseconds or microseconds. Sometimes, those values are without units (number of beacon periods, dwell or similar).
off and on disable and reenable power management. Finally, you may set the power management mode to all (receive all packets), unicast (receive unicast packets only, discard multicast and broadcast) and multicast (receive multicast and broadcast only, discard unicast packets).
Examples :
iwconfig eth0 power period 2
iwconfig eth0 power 500m unicast
iwconfig eth0 power timeout 300u all
iwconfig eth0 power off
iwconfig eth0 power min period 2 power max period 4
website with the current manpage:
http://linux.die.net/man/8/iwconfig
or simply:
$ man iwconfig
Last edited by stefanwilkens (2010-09-13 11:11:37)

IPhone File Transfer Speeds

I have two MacBooks and two iPhones and I'm seeing very different file transfer speeds between the two. Both have the backup option manually disabled to improve sync times.
Setup 1: iPhone 3GS with MacBook Pro (15-inch, Late 2008) model
Setup 2: iPhone 3G with Black Macbook (13-inch Mid 2007) model
The time it takes to sync video between the two is drastic with the newer model copying files in a few seconds, and the older setup copying files over 5-10 minute periods.
I have yet to swap the two iPhones on the two computers but from a technical perspective, I don't understand why one would transfer files faster than the other. Both are using USB 2.0 and I've already tried using the same cable for both. Anyone see similar behavior? Is this a facet of the older computer or older iPhone?

As an example, a USB host on a PCI bus will send or receive the data via the PCI bus; the stack will prepare the next data in memory and receive interrupt from the host. That's what I mean, how that's implemented.

K8T Mstr2-FAR7 ---- File Transfer Speed

I measured file transfer speed between partitions, 1) both in the same physical drive and 2) each in a different physical drive. The measurements were made on WXP and WVT by using a file having 1048MB in size. Results are as follows:
1) Partitions in the same physical Drive
WXPx86 : 18.55 seconds
WVTx86 : 38.91 seconds
2) Each partition in different physical drive
WXPx86 : 9.31 seconds
WVTx86 : 19.13 seconds
Are the above results normal? Vista's speed appear way lower than the maximum allowed by SATA-150. The speed may be affected by many factors. My hardware spec is shown below. RAM is in single channel mode and is running as DDR333.
Could anyone shed light on the matter of file transfer speed?

It's because Vista is buggy, everybody knows this.
If you want speed, use XP.
And that isn't the only problem with Vista, also graphics is 3x faster under XP.

My iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?

my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
i try to downgrade to 6.1.3 but its not possible

http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Downgrading isn't supported by Apple, sorry.

File transfer speed in Shared USB Hard Drive via Airport Extreme

I' am planing to buy one of this, but first I need to know what kind of file transfer speed I can expect when sharing USB drive via Airport Extreme 1000Mbps Ethernet.
Thanks.
Message was edited by: Robert81

most likely 14m/sec but normally 10.5 this is ethernet wired and usb attached. wireless would be about 8M/sec
Wired is good enough I use it for Finder copy frequently.

How do I see file transfer speeds?

Hey guys, does anyone know if it's possible for me to see file transfer speeds instead of just the time remaining in Finder?

Hi,
In song view, go to menu > view > view options and select bit rate, file type and size.
In preferences, you can change import settings to Apple lossless. When you use file > create new version you can now can now convert from aiff to lossless.
Create playlist based of file type being lossless.
Jim

Very slow transfer speeds with external hard drives through Firewire and US

Hi All,
My external drives transfer very slowly on my MacPro. I've been searching for answers and have turned up very little. Apple support suggested I post my issue here. Just to make a note, I measured my disk speeds with both AJA System Test and copying files between drives and reading the Disk Activity in Activity Monitor.
I have 3 external drives, all MyBook Premium or Professional, 1x 500GB, 1x 1TB and 2x 1TB in RAID 0. I had them on Firewire 400 and the RAID 0 2TB one on Firewire 800. My transfers on FW were all around 24MB/sec on all drives (much less than what I should be getting with FW400). I then read somewhere that the FW bus on the MacPro uses the slowest speed connected for all FW connections. So I unplugged everything but the FW800 Raid 0 drive and my transfer rate jumped to 40-60MB/sec. This is much better, but still about half or so of what I expect it should be producing from an external RAID 0 setup.
To keep my FW800 backup drive faster, I've plugged the other two into USB2.0. The transfer speeds on both drives are now hideous, around 10-15MB/sec. This is so slow, but I'm not sure what to try to fix my speeds.
The HD's in the external drives are all 7200rpm, and all should be transferring at a higher rate. Do you have any suggestions or ideas? Ideally I'd like to get everything transferring at rates they should be transferring at, but I'll settle with my current FW800 speed of 40-60MB/sec if I can get my other two drives transferring at a non-snail pace.
Is this a common issue? I can't believe I'm the only one plugging multiple external hard drives into their Mac Pro. I hope someone has a fix or solution for this. I'm all ears!
Thanks in advance.

Hi Kappy, thanks for the information.
So I rejigged my setup a tad. My RAID 0 is still FW800, the second drive is back on FW400 on the back port, and the third is USB 2.0 on the back as well.
It's interesting to note that I saw the FW800 taking a bandwidth hit if the FW400 drives was being read/written to. For example, if I was averaging 50-60MB/sec on the FW800 drives and copy something large to the FW400 drive, each drive averages out to about 30/MB second, roughly half the FW800 speed I was getting. The USB while the slowest didn't cause any slowness on the FW drives.
Here are my Xbench results. These results are from each drive being benchmarked individually with no other drives being tested at the same time.
*MyBook 2TB in a RAID 0 configuration: Firewire 800*
Results 75.42
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD My Book
Disk Test 75.42
Sequential 80.92
Uncached Write 69.16 42.46 MB/sec [4K blocks]
Uncached Write 110.79 62.68 MB/sec [256K blocks]
Uncached Read 53.66 15.70 MB/sec [4K blocks]
Uncached Read 136.76 68.73 MB/sec [256K blocks]
Random 70.62
Uncached Write 36.38 3.85 MB/sec [4K blocks]
Uncached Write 140.55 45.00 MB/sec [256K blocks]
Uncached Read 93.26 0.66 MB/sec [4K blocks]
Uncached Read 88.38 16.40 MB/sec [256K blocks]
*MyBook 1TB on Firewire 400*
Results 47.73
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD My Book
Disk Test 47.73
Sequential 52.47
Uncached Write 48.45 29.74 MB/sec [4K blocks]
Uncached Write 53.76 30.42 MB/sec [256K blocks]
Uncached Read 43.69 12.79 MB/sec [4K blocks]
Uncached Read 70.91 35.64 MB/sec [256K blocks]
Random 43.78
Uncached Write 17.29 1.83 MB/sec [4K blocks]
Uncached Write 98.83 31.64 MB/sec [256K blocks]
Uncached Read 76.33 0.54 MB/sec [4K blocks]
Uncached Read 97.01 18.00 MB/sec [256K blocks]
*MyBook 500GB on USB 2.0*
Results 40.60
System Info
Xbench Version 1.3
System Version 10.5.5 (9F33)
Physical RAM 16384 MB
Model MacPro3,1
Drive Type WD 5000AA External
Disk Test 40.60
Sequential 35.99
Uncached Write 37.31 22.91 MB/sec [4K blocks]
Uncached Write 37.22 21.06 MB/sec [256K blocks]
Uncached Read 26.62 7.79 MB/sec [4K blocks]
Uncached Read 50.27 25.27 MB/sec [256K blocks]
Random 46.55
Uncached Write 20.37 2.16 MB/sec [4K blocks]
Uncached Write 68.44 21.91 MB/sec [256K blocks]
Uncached Read 93.55 0.66 MB/sec [4K blocks]
Uncached Read 86.71 16.09 MB/sec [256K blocks]
So Kappy are you saying that those speeds look normal?
Thanks

Very slow transfer speeds with Airport Extreme and MacBook

I have been using a new Airport Extreme without problem at my home for the past six weeks. The speed and range was excellent with both my MacBook Pro and the MacBook which I purchased a few weeks ago. I came out to Greece with both laptops and a new AP Extreme box for my home network here. After set up I noticed that internet access was lethargic on the MacBook and file transfer between the two computers was extremely slow. The problem seems to be with the new MacBook (although it was working well in London). I've done some speed tests and the internet download speed is only 48 kpbs! I also notice that the range is very poor--in the room next to the router I am down to five bars. If I connect to the AP Extreme with cable I get the full 1Mbps I would normally expect here in Athens (ADSL nominal 2Mbps). The MacBook Pro has no problems with wireless access speeds or range, so I am assuming this has to be a problem with the AP extreme card in the MacBook. Is there anything I have overlooked? Perhaps something to do with setting up the new AP Extreme here in Athens?

By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

V. Slow transfer speeds with new dual band Airport Extreme

I have a new Airport Extreme (late 2009, dual band, full 'N' spec) which I am using to replace an older Airport Extreme (early 2008, 5Ghz, 'draft' N).
I have a USB disk attached and was interested in benchmarking the transfer speed of the new Extreme, compared to the previous version. The results are puzzling / alarming.
Shown below are transfer speeds (file copied to the attached USB drive) under different connection standards (2.4Ghz / 5Ghz & a/b/g/n)
'Old' Airport Extreme
5Ghz - 'draft' N : ~5-7 Mb/sec
'New' Airport Extreme
2.4Ghz - b/g : ~3-5 Mb/sec
5.0Ghz - a : ~3-7 Mb/sec
5.0Ghz - N : ~200 Kb/sec
Hence transfer speeds appear to collapse when I try to make use of the 'N' spec with the latest Extreme. I have tried altering items such as - wide channels (on / off), interference robustness (on / off), 5Ghz channel (manual, instead of auto), with no upside.
I seem to be at the point of concluding that either
1. I have a 'broken' Airport Extreme
2. The WiFi card on my early 2008 iMac (which implements I guess the 'draft' N standard) is 'incompatible' with new the Airport Extreme under a 'N' connection.
Any thoughts ?

Since all devices in my wireless network are capable of latest 802.11n protocol, I really do not need older and slower 802.11a/b/g protocols. To achieve above 200 Mbit/sec, 5GHz band with wide channel option turned on is really necessary. Thus I really wish I can turn off the 2.4GHz radio band (seems Apple has set this band as default) of my new dual band Airport Extreme to avoid unwanted bandwidth degradation. Unfortunately this is not possible with radio mode setting in Airport Utility.
The best I can do to force connection with 5GHz radio band (with quite consistent result) is as follows:
On Airport Extreme through [Airport Utility>Wireless] :
Radio Mode: 802.11n only (5Ghz) - 802.11b/g/n
More Options>Wireless Network Option>Transmit Power: 100%
More Options>Wireless Network Option>Use Wide Channels: checked
More Options>Wireless Network Option>5 GHz Network Name:
checked and same network name with extra suffix "(5 GHz)"
On 27" iMac through [System Preferences>Network>AirPort>Advanced>AirPort]:
Preferred Networks:
Create only one profile in Preferred Networks for the above network name with suffix "(5GHz)"
Uncheck the option [Remember networks this computer has joined] to ensure there is only one profile under Preferred Networks .
Once all above settings are done, restart Airport Extreme in Airport Utility. Your computer should connect wirelessly to the base station through 5GHz band after booting most of the time. Even when it is not occasionally, simply go to the Airport icon in main menu bar and click on the network name with suffix "(5GHz)" in dropped-down list to connect manually. With all these settings, I have achieved 300 Mbit/sec bandwidth on my iMac most of the time for fast Time Machine backup.
How I wish feature for better radio mode control by end user will be implemented in next update of Airport Utility. Apple should trust end user's brain better than artificial intelligence (or ignorance ?) in wireless network implementation. Wireless traffic between the two radio bands and among various wireless devices should be segregated specifically in Airport Utility by end users whenever dual band Airport base stations are in use.

File transfer speed with Ext. HDD very slow

Similar Messages

Maybe you are looking for