File transfers and software keys

After transfering files from a PowerMac G5 to a new Intel based iMac, do I need to re-enter the product keys to activate software I purchased for my old Mac?

It depends on the software, where it keeps the record of the keys, and the files you transfer. Some software will keep the key in a easily-accessible preference file, so if you transfer the appropriate preference, the key should transfer as well. Other software keeps the key in a a hidden file, often somewhere non-obvious. And some (high-end graphics and statistical software being the most common) locks the sofware registration to the hardware on which the software has been originally installed and so has a convoluted transfer process. You therefore may need to re-enter the key or go through other steps. If in doubt, consult the developer of the applications for the transfer procedure.
Note that going from a PowerPC-based Mac to an Intel-based Mac often involves reinstalling and in many cases upgrading apps. So your apps and keys may not transfer directly.
Regards.

Similar Messages

Transferring files, settings and software from old ibook G4 to new macbook

Hi all,
How do I boot up my brand new macbook (for the first time) and transfer all of my software, preference settings and files from my old IBOOK G4? Also, the Ibook has OS X 3.9 running and the new Macbook will obviously have a newer version. I don't want to lose/overwrite the OS version on the newer macbook.
Will I have any difficulty with my Adobe Creative Suite, Macromedia Flash or Dreamweaver in the move? Will all other preference settings and files be moved automatically? Will Itunes transfer all my music and video files automatically?

Hook the two machines up with a FireWire cable and then turn on the MacBook. Next, use the Migration Assistant to migrate your account from the iBook to the MacBook. Migrating items other than user accounts and their associated home folders may result in slow performance on the MacBook. You will be given the option to use the Migration Assistant when you first turn on the MacBook, and it can be run later by launching it from the /Applications/Utilities/ folder.
(15909)

SCP, SSH and SFTP in CMD / File-Explorer and SSH key management with Windows Credential Manger

Please add SSH, SFTP and SCP in CMD and File Explorer.
Also, allow us to copy to FTP in File Explorer.
Would be nice to have the SSH credentials managed by Windows Credentials Manager.

Even with the RHEL firewall completely disabled, it has the same upper limit. SCP between the Solaris systems, with ipfilter running on both systems and both systems on completely different networks, is not a problem. Between Solaris and RHEL, same network but different subnet, RHEL with no firewall running (only while troubleshooting this, don't panic), still a problem. Using PuTTY SFTP from/to any of the systems is fine, even though on different networks. The mtu on the RHEL was the same as the Solaris systems (1500) - changing values on the RHEL increased the upper limit but still hit a ceiling. Only have one RHEL system so I can't see whether RHEL-RHEL transfers are affected, only those between Solaris, PuTTY on Windows, and the one RHEL system.

Odd behaviour with large(ish) wireless file transfers

Hi I'm really pleased with my playbook - brilliant device !
I do however have one general dislike ; that is for micro/mini physical connectors. They are a fact of life on many devices now so ......
Anyway. In order to minimise my use of the micro usb connector I have been copying files to it across my wlan but have experienced some difficulty.
Most recently (last night) I was copying a 230 Mb video to my playbook. At various times throughout the transfer, my computer's progress bar would pause for a goodly number of seconds then jump by about a 14 Mb increment (something buffering somewhere maybe ?) This went on until around the 210/220 Mb when my computer gave up and reported that the "connection to the device was interrupted, ignore cancel"
I tried this with a number of files and got the same (or similar) result each time.
I realise this could be down to many things but just wanted to know if anyone else had noticed something like this happening.
For info:
Playbook 2.1.0.1088
Macbook Pro mountain Lion
Belkin F57D Router.
Kind Regards

bisleybloke wrote:
Hi there,
thanks for trying that. I guess I need to hunt a little more.
Regards
I have transferred lots of files a LOT bigger than 230Mb to the PB. Wi-Fi file transfers (and even microUSB transfers in fact) are sloooooooow by nature. I would suspect your connection to the router in your instance. I would investigate your Wi-Fi settings and adjust as required. I have had experience with this modifying something called channel width (I have posts about it here in the forums). Anyhow, that one little setting made a heck of a difference for me with throughput and general Wi-Fi stability with the PB on my network.

Recommended software for file transferring offline between Mac 10.5.8 and iPhone 5?

I have an iPhone 5 and a Mac OS X 10.5.8 therefore I am unable to sync my iPhone with iTunes on my laptop.
I am looking for software which will allow me to transfer files to and fro between my iPhone and Mac without access to the internet.
I realise that I can import photos from my iPhone to my Mac computer through iPhoto but I would like to do the opposite of putting photos from my Mac onto my iPhone. I have found answers of using such software such as Dropbox but it seems that I would need to connect my Mac to the internet, which I am unable to do. I would also like to import music from my Mac onto my iPhone if possible.
Are there any software or programs that allows me to do this offline by simply plugging my iPhone to my Mac via the USB port? I would be willing to purchase a program at a decent price so long as it is cheaper than having to buy a new Mac computer!
I would be thankful for any advice.
Cheers.

What about updating your Mac to OS X 10.6.8? That's only US $20 from Apple.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

I have an ancient laptop (from 2005) that has my entire music library. This laptop barely works and some keys don't type anymore. How can I get all this music transferred to another computer, or available to me on the cloud?

I have an ancient laptop (from 2005) that has my entire music library. This laptop barely works and some keys don't type anymore. How can I get all this music transferred to another computer, or available to me on the cloud?

No... do not move programs.
About the iTunes library files
Your iTunes library files track the media you add to iTunes, how you've organized it, and other information such as playlists. By default, these two files are in your iTunes folder:
Mac OS X: /Users/username/Music/iTunes/
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

HT201240 Hijust bought my brand new mac computer had all my files transferred from my old pc onto the new one and turn it on and it has a password to enter and get started i have tried my apple id password and another the store had written apple default

Hi
Just bought my brand new mac had all my files transferred from my old pc and now i try to start and it has a password that i cant get past
i have tried my apple password and another the dick smith store had on a piece of paper nothing works and the store isnt open easter sunday
can anyone help
Marj

Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Problem with Jabber and file transfers WAN - LAN-Users - a solution!

Hi,
I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT.
I had this problem to and found an easy solution:
My situation
iChat-Server behind a Netgear ProSafe FireWall. I opened the needed Ports including Port 7777 (the Port for the iChat-proxy (proxy65).
The iChat-Server is configured to host the domain "server.ourdomain.com" (as an example).
This address can be reached from the LAN and also from the WAN-side.
From the LAN-side the DNS redirects to 192.168.1.1, from the WAN this domain redirects to our official IP-address (the WAN-IP of the FireWall).
I tried nearly all kinds of mentioned solutions, but nothing helped.
The really easy solution is: I just added our official IP to the "Hosted Domains" in the iChat-section of Server-Admin.
After that change, the transfers are made via the proxy65 of iChat-Server. The transfers are shown in the log /private/var/jabberd/log/proxy65.log.
I think, that the other posters who also have this kind of problem are working in a similar setup (domain name of server is used from the LAN AND the WAN-side with different IP-addresses (LAN-IP & WAN-IP).
This solution will only work, if the WAN-IP is a fixed address.
svenc

Until the introduction of file promises in AIR Athena, it has never been possible to drag remote files out of an AIR application.
You could refer to the http://www.adobe.com/devnet/air/flex/articles/using_file_promises.html
Hope this is helpful. Please let me know if I could help more.

Regenerate the security files : SecStore.properties and SecStore.key

Hello Expert,
I have a big issue because I lost the both files : SecStore.properties and SecStore.key from the directory /sapmnt/SID/global/security/data. I tried to regenerate the SecStore.properties from another instance. And when I tried to connect via Configtool I have the following error message : The encryption key (usually in the key files) is
not the key that is required to decrypt the data in the secure store file or the system name is wrong (SID).
I think that the idea is to generate the new key file.
Could you please help me to find a solution to solve this issue.
Many thanks in advance for your greatfull help.
Regards
San

Check this out, though it doesn't directly address your problem. It should definately give you more insight.
http://help.sap.com/saphelp_nw04/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/frameset.htm

I bought a new computer, and i have transfered everything using home share, file transfers, etc.. yet still when i go to sync, itunes tells me ipod can only be synced with one computer... is there a way to retire the relationship with the old computer?

i bought a new computer. the itunes app allows for home shareing, file transfers, etc.. but i want to discontinue the syncing with the old computer and sync my ipod touch now only on my new system... but i cant seem to disconnect that old relationship at all.. when i try to syncit says that my ipod is already synced with another computer, do i want to discontinue that and only use the new informationon this computer? i dont want to do that yet because it doesnt seem like everything has come over, and i am afraid of losing songs that i downloaded from cds, etc..

if you don't want to sync it because you don't think that everything has been transferred then i would check first if you can, before you commit to used only the data from your new computer.
though, im not sure if this is true, but i think that when you sync your ipod to a new computer it will take the items from your ipod and put it on itunes, like when you purchase something on your ipod and it gets automatically transfered, but don't take my word for it.

How do I identify the latest file modifications, application install, and registry key modification for Security Forensics.... using GP Audit for registry/file system

Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!

Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this.

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

File transfers and software keys

Similar Messages

Maybe you are looking for