File URLs -  do not accept spaces in folder/direcotry name?

Version of US used is: 1.0.3
I tried to create a file data source with the following file URL from the Administration Application under the Sources/File tab:
file://localhost/c:/myDir/New Folder/
But I got the following error:
Oracle Ultra Search Error
Invalid file protocol URL:Folder/
URL does not begin with file://
Note: It is not a problem if the folder name does not have a space. E.g. when I renamed "New Folder" to "New_Folder", it was fine.
My questions: Is that correct that US does not accept file URLs with spaces in the folder/directory names? If so, is it the same with the newer release US 9.0.2?
Thanks.

Currently space is used as a delimiter in file seed URL.
Therefore, user can not crawl files located in directory containing space. This is the case for 9.2, 1.0.3, 9.0.2. You raise a good point, I will evaluate the possibility to remove this restriction in our next release (iAS 9.0.4). If we decide to support this, I will update this question.
Thanks ! ^_^
Cindy
This is the text on Create File Source Step 2:
===================================================
Enter a list of URLs separated by valid delimiters. A valid delimiter can be any one of the following characters: a space, tab, newline or comma.

Similar Messages

  • Help: startup-config file open failed (Not enough space)

    Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
    this is the output from a dir flash:
    Directory of nvram:/
      227  -rw-       25897                    <no date>  startup-config
      228  ----        1933                    <no date>  private-config
      229  -rw-       25897                    <no date>  underlying-config
        1  ----          83                    <no date>  persistent-data
        2  -rw-           0                    <no date>  ifIndex-table
        3  -rw-         577                    <no date>  IOS-Self-Sig#1.cer
        4  -rw-         615                    <no date>  IOS-Self-Sig#2.cer
        5  -rw-         660                    <no date>  vlan.dat
        6  -rw-         107                    <no date>  cca.xml
        7  -rw-         586                    <no date>  IOS-Self-Sig#3.cer
    262144 bytes total (227094 bytes free)

    OK.
    Try this:
    conf t
    service compress-config
    And see if that helps. 
    If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
    copy run tftp
    copy tftp start
    Then you can try a reload and see if it is cured.
    I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
    Of course, dont be remote when you do this and only do it during a maintenance window.
    Steve

  • When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

    when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

    Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Good evening. When I try to rename a master file or export a master file, it only allows 9 spaces for my new name, even though Aperature 3 allows many more spaces than that for version names. This creates a lot of problems and headaches for me.

    Good evening. When I try to rename a master file or export a master file, Aperature 3 only recognizes the first 9 spaces for raw .NEF files, even though it easily uses twice that many spaces for version names. I have a system in place that works really well for me, wherein by changing the file name I can recognize what's important to me just by glancing at the file name, no matter what system it is in, I do not have to open or mouse over anything to know what the file is. My files also arrange themselves in order no matter what file system they are in. Can someone please tell me if there is a setting, or something I am doing wrong, that prevents me from using a longer Master file name. I can't be the only person who would like to have his Master File names correspond to the name that appears in the Aperature library, and would like to use at least 16 spaces (numbers, letters, etc.)
    Thanks,
    Photo Al

    Hi Frank,
    As you suggested, I am attaching several screen shots. In the first one you can see how I set up my preset. I used "Custom Name" and "Counter" with a dot between the two drag ins, followed by "D90". I also have a dot to seperate the 8 digits in the Custom Name and make it easier to read.
    I then click "OK" which takes us to the second screen shot. Here you can see that in the Example File Name everything looks perfect, and you can see I have clicked on "Apply to Master Files".
    In the third screen shot you can see that the version in my library did in fact change correctly. With the "mouse over" pop up screen you can see, however, that the Master File name was changed  to "1933.1017.NEF". It failed to carry the "12D90" and if I go to where my masters are stored that is exactly what the name was changed to.
    In the fourth screen shot I attempt to export the master. You can see how my "Version Name" is set up.
    And finally on the 5th screen shot you see in the File Name Example the name "1933.1017.NEF" once again, which when I export the master is exactly how the name will appear. Since I will export more than one file at a time , a (1) and  a (2)  etc., will appear at the end of the names because all the files are being given the same "1933.1017.NEF" name.
    I hope this reply does a better job of clarifying my problem. I am anxious to see if this is something I simply misunderstood, or if I am simply doing something wrong.
    Thanks,
    Photo Al

  • File deletion does not increase space available in CC

    I did an experiment this morning to see what was going on with my space utilization being incorrect.
    1) I added about 5GB of files and folders to my local CC Files folder
    2) Sync worked properly, my utilized space went from about 5GB to about 10GB
    3) I deleted 5GB of files and folders from my local CC Files folder
    4) Sync worked properly, and all 5GB of files and folders were archived in CC
    5) From the website interface, I deleted all 5GB of files and folders from the archive
    6) My archive showed as empty via the web interface
    7) My files and folders on the CC web interface matched the contents of my local CC Files Folder
    8) My CC space utilized, according to the web interface, only dropped from 10GB to 9.2GB, but the actual utilization should be a little over 4.9GB.
    I suspect this is happening to everyone and will get worse with time. Adobe - please address.

    The steps you describe don't replicate the effect here, I've tried it several times on three workstations. At step 4 the usage remains allocated (as it should, given the files are in the archive folder) but as soon as the archive is permanently deleted, usage in both the web portal and CCDA falls to 0%. Within seconds.
    If it's not reducing in your case, then the files aren't being deleted. They may not show up, but that's a different problem to the idea that deleting a file doesn't reset the usage.

  • The "File" class does not accept my paths

    Hi ,
    I need yo creat an instance of a directory/file using the File class , but it seems to not recognize my paths:
    using :
    File f = new File("c:/Dir1/dir2/file.ext");
    or:
    File f = new File("c:/Dir1/dir2");
    allthow all do exist , when I use the f.exists() it returns false !!!!
    what is missing ?
    thanks , Adaya .

    Hi
    Found my problem - it wasn't the backslahes (one can use both ways '\\' or'/') it was a realy stupid problem..
    thanks any way ,
    Adaya .

  • File(URL) constructor not recognized in SDK 1.4.2_05

    I currently have a class with the following line in it:
    File myFile = new File( new URI( uri ) );
    When I run it using versions 1.4.2_01 or 1.4.2_04 of the SDK, everything works just as advertised. However, when I use 1.4.2_05 of the SDK, I get the following error:
    [javac] /home/sbutman/osr-0.1/src/com/techxing/osr/ConfigurationSettings.java:326: error: Can't find constructor `java.io.File(Ljava/net/URI;)' in type `java.io.File'.
    [javac] File myFile = new File( new URI( uri ) );
    [javac] ^
    [javac] 1 error
    It seems that the constructor is invalid, but I don't believe it should be.
    Any suggestions?

    After further investigation, I've determined that this is not a Java problem; it may, however, be a problem with ant (I'm using ant to do the builds). If I build with ant using version 1.4.2_05 of the SDK, I get the error as reported in my original post. If I do not use ant (or do use it with an earlier version of the SDK), I don't get the error. I'll do more investigating and post the resolution here when I find it.

  • Flash player will not play flvs from folder with name containing non-Roman Chars

    We're trying to play flash as part of a program that can be installed to locations including non-Roman chars (European, Arabic, Chinese, etc.).  When the installation path includes any non Roman chars, video will not play.  The non-roman chars are garbled when Flash tries to load the flvs. Correct non-Roman chars are: ńśćłł.  When loading video it gets translated to: ńśćłł
    We've found this happens whether we are trying to access the video from the xulrunner app or by taking the activities out and running them within an html frame.
    Audio on the other hand is no problem
    The path information for the xulrunner app from Process monitor is:
    Video not found from the video player.
    10:41:25.3337898    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:41:25.3339452    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\video\VI-d9e37af511faa\Engplus1.flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found.
    10:41:59.7659648    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:41:59.7660482    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\audio\AU-fa6ed5d31f577\LG0CD1Track06.mp3    SUCCESS    Offset: 4,096, Length: 4,096
    Video not found from a flash interactive
    10:43:50.0804572    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, AllocationSize: n/a
    10:43:50.0806413    xulrunner.exe    2316    CreateFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\video\video. flv    PATH NOT FOUND    Desired Access: Generic Read, Disposition: Open, Options: Sequential Access, Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a
    Audio found from a flash interactive
    10:43:50.1928413    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 4,096, Priority: Normal
    10:43:50.1929148    xulrunner.exe    2316    ReadFile    C:\Pro\ńśćłł\Flash dll Test\.shared\content\assets\flash_interactive\content\FL-123456780l0l\assets\audio\journa list.mp3    SUCCESS    Offset: 0, Length: 25,206, I/O Flags: Non-cached, Paging I/O, Synchronous Paging I/O, Priority: Normal

    Not exactly sure what you are doing, but it is obvious that some part of the program you are running does not support multibyte characters like Unicode.
    If you are developing that application, make sure it is Unicode enabled.  If it is Flash (or Flash Player) that doesn't understand it, then you may not be able to do anything about it.
    What I would try if I were to encounter the situation, I would try to use the DOS (8.3) path names, like C:\Documents and Settings would normally be C:\DOCUME~1 or C:\Documents and Settings\All Users would be C:\DOCUME~1\ALLUSE~1 etc.
    Use the DIR /X command to find out what the DOS folder names are.

  • ICloud does not accept 120MB of pages file to be uploaded using my MAC

    I wrote a book with sone pictures having a size of 120MB. When I tried to upload it to icloud after a certain time icloud stops the uploading process.
    I tested small size pages document . Uploadig process worked fine. I have 1.6GB free space however when I tried to upload 120MB file icloud does not
    accept it . Any advice?
    Best regards

    This issue has been solved. I have just managed to upload  120MB of pages  file finally.

  • Nas drive does not recalculating space after deleting files on Nas Drive??

    Greetings to Respected expert,
    Actually we have configure Window server 20082 Storage server.We have NAS drive configured which have 300GB quota limit. The actual data in the folder is 185 GB but it shows only 15 GB free and shows a warning .Please assist me why NAS server does not re-calculate
      the space after deleting files or does not leave space. Pardon me if I am not able to clear you my problems.this is very urgent for me.
    Thanks And Regards
    Rajnish Singh

    Hi Rajnish,
    As you mentioned "quota limit", it is set via FSRM or specific function on NAS?
    Meanwhile could you confirm the number 185GB is accurate? Sometimes a part of used space is just not calculated. You can confirm with checking the total space on NAS locally.
    If the number is correct and quota is set via FSRM, check if it is the Disk Quota which not re-calculated the released space. Try to clear the Quota setting and reconfig with 300GB limitation and see if issue still exists.
    If you have any feedback on our support, please send to [email protected]

  • The file could not be saved in folder "Time Machine Backups"

    I've tried to setup TM with several external drives (USB and Firewire) and I get the same results... the file "xxx" could not be saved in folder "Time Machine Backups". Any ideas?

    Hi, and welcome to the forums.
    If that's exactly what the message says, it's a new one. If it's actually "An error occurred while copying files to the backup volume" or "Aborting backup because indexing a file failed," see #C3 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
    If not, see #A1 there for a handy widget that shows the backup messages from your logs. Download and install it, then copy and post all the messages for one backup attempt here.

  • Qaaws "Web services url is not correct" while adding host.

    Hello all,
                I am getting error "The web services Url is not correct" while adding the host name for Qaaws. The error is coming on the right side of the input text field of the Name showing by yellow warning icon.Please help me to resolve it.I was tried by keeping the host name instead of ip address.But is saying the same error.
    regards
    vishnu

    To enable rest support there are some instructions below:
    Before undertaking this process, I recommend backing up the file(s)
    you are going to edit.
    By default REST is disabled in Axis 2. We need to enable it. We
    need to go to the following folder. Assuming D: is the installation drive:
    1.     D:\Program
    Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\conf (for 32 Bit OS)
    or D:\Program Files (x86)\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\conf (for 64 Bit OS)
    2.     There is a file with the name axis2.xml (This file is an XML File and contains many parameters as well as many other things).
    3.     Make a backup copy of the filename you are about to edit.
    4.     Open the axis2.xml file in Notepad or 'XML Editor' to edit
    5.     Search for the word REST (Ctrl & F is probably easiest)
    6.     You will see a line like this
    <parameter name="disableREST" locked="true">true</parameter>
    We need to replace' true' with 'false' to enable REST, and after the changing that line will look like following:
    <parameter name="disableREST" locked="true">false</parameter>
    7.     Save the file and restart the web server.

  • Can't create file : Document.pdf. Right-click the folder you want to create the file in, and then click properties on the shortc

    Really Good One .... I resolved my problem from outlook for open the files.
    Try it now....
    Similar to the previous post, I resolved by doing the following:
        1. Open REGEDIT.EXE and go to Edit -> Find... In the Find dialog box type "OutlookSecureTempFolder" without the quotes and locate that registry key.
        2. That key will contain the actual folder location, and will look like:
           C:\Documents and Settings\%USER_NAME%\Local Settings\Temporary Internet Files\OLK#\ (where # is a random letter or number)
        3. Copy the location of that folder.
        4. Click on Start -> Run... and paste the folder location from step #4 then click OK.
        5. Windows Explorer will open that folder. Please, delete all files present.
        6. Restart Microsoft Outlook and you should be able to open your attachments.

    Outlook 2003
    If you are using Outlook 2003, follow these steps:
    Click My Computer, and then double-click drive C.
    On the File menu, click New, and then click
    Folder.
    Name the folder temp0.
    Click Start, click Run, type regedit, and then click
    OK.
    Locate and then click the following registry key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook\Security\
    In the right pane, double-click OutlookSecureTempFolder.
    In Value Data field, type C:\temp0\ and then click
    OK.
    Exit Registry Editor.
    Restart the computer.
    Try this and make the comment
    I used this on Outlook 2007.  Also used the "let us fix it for you" link in the help section after backing up the registry and everything is working, at least for now.
    Hope this helps others!

  • "URLs with .file not accepted"

    Just upgraded to Lion OS 10.7. When I try to search for an upgrade, I get the message URLs with .file not accepted. Anyone know what the problem is?

  • After accepting update to my time capsule, I can no longer complete a backup because there is not enough space.  I tried deleting old files, but it doesn't seem to work.  Any advice:

    My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer.  The message is that there is not enough space.  I tried deleting my files, but it didn't help.  any suggestions?

    How much space is there according to airport utility?
    TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
    And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

Maybe you are looking for