File will not open in Elements 11

I installed Elements 11 on a Windows 7 system. When I go to FILE and select OPEN and then go to the folder where pictures are stored and then click on the folder nothing appears except the message "No items match your search". I have been using Elements 5 on an XP system and have no trouble selecting the folder, opening it, select the pictures I want to edit and edit them. What am I doing wrong in Elements 11?

Hi,
In the File>Open dialog next to Files of Type, do you have All Formats selected?

Similar Messages

Some Canon CR2 RAW Files Will Not Open In Elements 8

I use a Canon 7D DSLR. Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
Some files still open others do not. I can think of only one thing. I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
Any ideas why this would happen? I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
I appreciate any guidance in this matter. Needless to say I am resetting my camera back to Large RAW files only.
Alex

ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
http://www.adobe.com/downloads/updates/
sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
Here is technical information on the reduce-sized RAWs:
http://lclevy.free.fr/cr2/#sraw

.prel files will not open in Elements 10

When i try to open a .prel file i get "this type of file is not supported or the required codec is not installed" , i have opened/edited/saved these files many time before without issue. How do i fix this?

LionkillerArt
Did you say that you were working on Windows or Mac? For now, assuming Windows,
1. Go to the Adobe Folder in Documents (should be there unless you changed the default).
2. Locate the project.prel file of interest in Adobe Folder/Documents Folder/Premiere Elements Folder/11.0 Folder. Inside the 11.0 Folder, among some folders and other files, are the project.prel files if you did not do any special organization. Right click the project.prel of interest and select Open With, followed by Premiere Elements 10. Does the project now open?
Do you have any versions of Premiere Elements on your computer except this Premiere Elements 10?
Have you deleted or moved any of the source media that went into your project after you saved/closed any of these projects? Where are your source media stored? If on an external hard drive, is the drive letter of that drive changing on its own?
What happens if you rename one of the problem project.prel files in the Adobe Folder and then try to open it from there?
Just some thoughts for now.
We will be watching for further developments.
Thanks.
ATR

RAW files will not open in Elements 8

I downloaded and installed several actions for elements8 this afternoon. I also downloaded a couple intended for photoshop that were self installing. I clicked on landscap_and_sky_action_by_fcpr,rar. I thought It would open and I could install the action like the others. Apparently, it self-installed as if\t was supposed to( just in the woring program.) Some little time after that I tried to home a new RAW file downloaded from my camera. I got the error message, cannot open (file name and full path) because it is the wrong type of file.
I have tried to open the raw files with file open and file open as specifiying that the file is a raw file.
I also tried to open an older RAW file with the same results (previously open before today.)
This is the first time I have had this problem. I have been using RAW files for the last year and half without any problems.
My best guess is that rar file corrupted a file somewhere, but I have no clue where.
lastly, I uninstalled elements 8 and reinstalled it. Same problem. I did note that when uninstalling elements, it does not erase the directories and many of the files. I have hestiated doing that as I have a massive set of photos in the Organizer, have updated the RAW Camera database (worked fine after that) and added several features (effects) to elements.
Any suggestions on a fix.
Ed

I removed the pior ACR and renamed it in case I needed it before installing the new one. The new one has been working for a year+ without any problems. This is a brand new problem.
I think I have found the problem. I installed Optikverve's Vitural Photographer yesterday. I thought it was a stand alone like the studio. I found that it installed inside Elements. That was just prior to Elements starting to refuse to open RAW files. Everything else (that I have checked ) seems to work fine. That says to me that program is the problem.
I have just finished a negative virus scan on the computer and I am getting ready to back up Organizer to an external hard drive. I am going then to remove Elements and wipe out out the files and directory structure that remains. I will then install Elements. That should put it back at "as new" state. I will have reinstall the new ACR files and the other addons. At least, it should work again. (I hope.)
Ed

Canon 70D Raw files will not open in Elements 11

My canon 40d camera works with Element 11 in raw.....upgraded to a 70d only to find that it wont open with raw...any chance there will be an update soon for this popular canon 70d.

The EOS 70D was first supported in Camera Raw 8.2 (the Adobe plug-in used by Elements to process Raw files) which is only compatible with Elements 12 and later.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Options:
Upgrade to Elements 12, or
Download the free Adobe DNG converter, convert all the Raw files from the 70D to DNGs then edit the DNGs in Elements 11
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Nikon D5300 raw files will not open in Elements 12

What do I have to do to open raw files from my Nikon D5300 in the new Elements 12

Go to Expert Mode and fron the top menu click:
Help >> Updates
Install Adobe Camera Raw plugin v 8.4

Editor will not open in elements 7

I had to reboot my computer to factory settings and installed El 7 several times and editor will not open. Error message elements editor has stoped working. I have installed it in my sons computer and no problem. Can any one pull me out of this black hole?????????????

Hi! I have fixed problem. The solution is to upload on a different user. Thanks,    Doug
Date: Mon, 14 Jan 2013 22:53:09 -0700
From: [email protected]
To: [email protected]
Subject: Editor will not open in elements 7
    Re: Editor will not open in elements 7
    created by ukgaurav in Photoshop Elements - View the full discussion
Hi, Please try couple of probable solutions as mentioned below: Solution 1:1. Close Elements.2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences. Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.Solution 3: Try launching with anti-virus off or removing PSE from conflicting list. Solution 4: On the drive on which you have installed PSE,on my machine it is on C:    Go to C:\Program Files\Adobe\Photoshop Elements 7.0\Locales\\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.    Now launch PSE and check if it works.    For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743 Thanks,Garry
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4994422#4994422
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4994422#4994422
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4994422#4994422. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

PDF files will not open in a Safari (v 6.0.5) browser window

PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
Adobe Reader version 11.0.04 is now working for me.
Thanks for the help and the solution C.F.McBlob

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

DNG Converter is FREE. Yes, really. No subscription needed.
- Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
- Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
See here for manufacturers who do (it's an old list, but you get the idea):
http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
- Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
Ask yourself why other manufacturers don't use a documented backwards-compatible format.
- Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
"Poor Planning on your part does not constitute an Emergency on my part."
- I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

A Pages file will not open due to index.xml not found, what is up with that?

I recently saved a file on Pages 5.5.2. on my IMac hard drive. Now I find that on attempting to open it the file will not open due to index.xml not found. Hoe do I correct this?

I have this issue, as well - although perhaps in a different content. When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message. I am very concerned that I may lose access to some of these files. The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document). I thought I needed to upgrade the old documents to the new Pages, but this didn't work. Does anyone have any ideas? And, I'm not a techie - so you'll need to break it down for me.

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

Mov file will not open on Premiere CS6 for Windows

I am a student working on a project that I started in university on an Apple Mac desktop. I decided to carry my project back home to continue with it on a laptop which is Windows...however the Mov. files will not open up on premeire pro and it is really frustrating as I have done a lot of work. How can I import these videos without losing any work or having to start again?

Quicktime X does NOT work http://forums.adobe.com/thread/888722
-Premiere Pro REQUIRES Quicktime 7 won't work with Quicktime X

File will not open in Elements 11

Similar Messages

Maybe you are looking for