File will NOT Publish in Captivate 5.5

I have been a long time user of Captivate starting with Captivate 3 and working my way up to using Captivate 5.5 now. At work, I have been working on a rather large scale project, but today one of my modules (about 279 slides) refuses to publish. Mind you, I have probably published this thing 2 dozen times over the course of the past two weeks just fine. I do not know what the issue is. Every time I publish the module it stalls at 70% generating slides and will not move any further. I literally left it alone for over an hour and it did not budge. I had two other co workers try on their computers and it did the same thing. This led me to believe that it was the file (maybe it had somehow corrupted which has happened to me before), so I started chopping it into pieces, copying and pasting it into new modules and trying to publish it that way, but it did the same thing EVERY time. I can publish any other modules just fine, but not this one and I don't understand why. Knowing Captivate, unless there is another issue that I just don't know, I think I am literally going to have to recreate these slides from, copying and pasting the individual elements into a new project file with all new slides because something has glitched in the coding behind the scenes. Please help because I do not want to have to do that for 279 slides! Thanks! Specs: Publishing to Zip File Scorm 1.2 Compliant and at Low Quality.

Try going into Edit > Preferences > Project > SWF Quality and turn off all compression options, then try publishing again.
If that does not work, you may have something on some slide that is causing the issue. Try hiding groups of 50 slides in the project, one group at a time, publishing after each step, to see if there is one particular group that when hidden allows it to publish. If you find that group, start hiding groups of slides inside that group until you isolate the problem slide. Then recreate THAT slide.
If you have hidden ALL slides in the project without being able to publish, then your issue could be corruption in some Advanced Actions in the project. Copying all slides to a new project shell will strip out all Advanced Actions. You'll need to recreate them.

Similar Messages

Flash file will not publish SWF

I am a novice when it comes to flash so please bare with me on this one.
I have recently taken over a project started by another person who has been let go due to lack of performance and other issues.
He has created a FLA file and an .exe file. But I am have been asked to place the movie on to the internet.
The FLA file that I have will not let me publish an SWF file to be uploaded to the internet, in fact it will not let me publish anything.
I have changed the publish setting but when I go to publish it the SWF file is not created.
I just want this file in SWF format and for it to autoplay when the website is loaded.
Let me know what I am doing wrong.
Thanks for your Help in advanced
Travis
Extra Information:
I have used a exe to swf converter to convert the EXE file that was already made into a SWF file for the internet.
This does make an swf file but the file is not editable and will not autoplay once it is uploaded.

Any suggestions here? I am having the same problem (minus the part about .exe's):
http://forums.adobe.com/thread/465031?tstart=0
Double checked my publish settings, the path is correct. I have tried exporting a movie to my Desktop, does not work. Tried copying content to a new file, same problem. When I publish, the dialog shows up and a SWF even shows up for a second in the Finder, but then disappears.
I really need to work with this file. I have submitted a support ticket to Adobe, and am awaiting their reply (not holding my breath). Please HELP!

Contribute CS3 will not publish Flash Player

A few months ago the company I work for bought Contribute CS3
to edit our website. The homepage of our website contains a Flash
Player file. When I edit and publish this homepage Contribute will
not publish the Flash Player file this section just shows up blank
stating movie not loaded when I bring up our website. The same
thing happens even when I do a 'send for review' before I actually
publish the page. I have administrator rights through Contribute to
edit this website therefore I am confused as to why Contribute will
not publish this Flash Player file. I have also tired to reinsert
the Flash file while editing in Contribute and still the file will
not publish. Would anyone know why this would happen?
Thanks!

Is this occurring with other Web CS applications or only with
Contribute CS3? For general troubleshooting of Web CS products
please go here
http://www.adobe.com/go/kb401401
If this does not address your issue, submit an incident
request via the product support page
http://www.adobe.com/support/contact/

Any version of Flash (cs3-cs5) will not publish my file..

Hi all,
this is the first time i encounter this problem.. I had the problem where a file would not open correctly which was also addressed at this forum. But this one is different. this file was created (from what i remember) in Flash 8, then opened/saved in all possible flash versions for updates in time.
While it will open just fine, it will not publish. The publish window with the percentage will open up for a split second, then it will close with no messages whatsoever, no actionscript errors, nothing. F12, the same thing again. No possible settings could solve this. I am willing to send the file for testing of course, have tried to publish using Flash cs4 and Flash cs5. I thought of going back to Flash 8 by opening the file and saving to a previous version but as soon as i open the file in Flash cs3 (while the file has been saved as cs3) it will not open the file with an error message that i cannot remember right now.
So the problem might lie in how Flash cs3 saved the file, but it will open just fine in cs4 and cs5 so the file is not corrupt in any means..
any ideas?
George
p.s. I tried deleting EVERYTHING off the stage and the library and yet it wont publish.. tried copying all frames on another empty file, couldnt publish either...

Hi,
Try using different machine

Publisher file will not open

I HAVE OFFICE 365. PUBLISHER FILES WILL NOT OPEN. EVEN FILES I JUST WORKED WITH. WARNING MESSAGE SAYS A PROBLEM HAS BEEN DETECTED AND IS PROTECTING MY COMPUTER.

Hi,
If you face the error "Publisher cannot open the file" or "Publisher has detected a problem", we need to add the PromptForBadFiles subkey to your computer's registry.
ImportantFollow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it,
back up the registry for restoration in case problems occur.
1. Press Win + R, type regedit.exe in the blank box, press Enter.
2. Locate and then select the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Publisher
3. On the Edit menu, point to New, and then click
DWORD Value.
4. Type PromptForBadFiles, and then press ENTER.
5. Right-click PromptForBadFiles, and then click Modify.
6. In the Value data box, type 1, and then click
OK.
7. On the File menu, click Exit to exit Registry Editor.
If the issue persists, please let me know the exact error message. Or you can provide a screenshot to us, to protect your privacy, please send it to our email address:
[email protected]
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error Message: "A virus was detected in FILENAME. This file will not be uploaded"

I have been synching files using Creative Cloud Connect for many months. During the past few weeks, I get the message "Some files failed to sync". When I click on "Learn more", it has 3 files there and all have the message "A virus was detected in filename . This file will not be uploaded". I scanned all three files with AVG and Malwarebytes (installed on my system) and both report that there is no virus in those files. I have tried to chat with support but I could not find any resolution with them. I believe that I never got to the right place. I was connected with 5 different people. At the end of the last discussion I spoke to Adobe Captivate support. It so happens that the files with that error are all Adobe Captivate files. But that support also concluded that they couldn't help. I could not find similar entries in the forums either. Did anyone else have this problem?
I appreciate any help.
Angela

No unfortunately, I have not. I spent over an hour on the phone with them already regarding this topic. In the end, the support in Adobe Captivate (that's the 5th support group they connected me to) told me that I wasn't allowed to upload Captivate files since Adobe Captivate 8 is not a CC application and that's why the problem was happening. I am absolutely sure that this is untrue since I have many Captivate files on CC. I think the key will be to get to the right support group. Good luck! I really hope you find a solution. Keep me informed. Thanks.

Iweb will not publish...

iweb will not publish. i keep getting error message saying I need to sign in but i'm ALREADY signed in. this mobilme stuff is a mess and i am not happy about this...
any suggestions on how to resolve this issue would be greatly appreciated...

I can usually get thru on the second or third try using the File->Publish to MobileMe menu option repeatedly.

Exe file will not start using a Measurement studio 2013 component

Hello,
I use Meausrement studio 2013 with visual studio 2012 and vbnet on windows 7.
On a new project (windows form application), i use a form and a ScatterGraph component. I compile, no errors and it works fine.
Now, i try to start this application on a another Windows 7 station. (The framework 4.5 is installed on its station).
The exe file is in a directory with the natrional Instruments dll files.
The exe file will not start, no errors.
PS: Before, with Meausrement studio 2010 and visual studio 2010 all worked fine.

Hi, virgule
It sounds like you are using the "Publish" feature in Visual Studio (a.k.a., ClickOnce) for deployment, is that correct? If so, unfortunately ClickOnce is not supported by Measurement Studio components.
If you are looking for a good way to deploy Measurement Studio applications, I would highly recommend upgrading to Measurement Studio 2015, which ships with Measurement Studio Installer Builder. You can read more about this here: http://www.ni.com/white-paper/52669/en/
If you cannot update to Measurement Studio 2015 and are using Visual Studio 2013, NI recommends using WiX for creating your installer. More information on WiX deployment can be found here: http://digital.ni.com/public.nsf/allkb/764B727C9BD2C4C686257C970053D059
Thanks,

IWeb 09 will not publish

I just upgraded from iWeb 1.1.2 to iWeb 09. I then made a number of changes to my website. I have attempted to publish the site dozens of times since I made the changes. The site will not publish. The publishing process seems to be correct. I get the "site has been published message, but when I visit the site the changes are not there.
Has anyone out there had this problem?
Thanks,
Jack

Versions of iWeb previous to '08 use a domain.sites file and published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb.
iWeb '08 converted the file format to domain.sites2 which was not successful for a lot of us. I ended up rebuilding all my sites. This version also dropped the iWeb folder on your iDisk and publishes to Finder/Go/iDisk/My iDisk/Web/Sites as does iWeb '09.
Also .Mac was changed to MobileMe for some reason.
You will note these differences in the two URLs.
I have never tried to convert a site made in '06 to '09 without going through '08.
As I pointed out, the conversion is not perfect and you should deleted and redo the sections that don't publish correctly.
If I was in your situation, I would start afresh on a new, blank domain file and copy the content that you want to keep over from the published version of your old site to the new domain file..

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

.gif files will not load into site

I posted a question earlier about pages not loading and the question was answered, but now my .gif files will not load. Below is the log:
Started: 4/9/2012 2:41 PM
imageshomepage\Announce35.gif - error occurred - An FTP error occurred - cannot put Announce35.gif. Access denied. The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
imageshomepage\Announce35.gif
Finished: 4/9/2012 2:41 PM
I have them loading into the images folder that is in the htdocs folder.
I stated in my previous question that I am self taught via the adobe DW tutorial. I had a catastrophic computer crash and had to reload everything. I apparently did not tell DW which file to load into before and now that is fixed. Any help would be greatly appreciated.
Thanks

I was never a big fan of using DW to FTP. There are several FTP programs that you might find work better than DW. For example Filezilla, free and works pretty darn well.
http://filezilla-project.org/
For me, being able to graphically see my local site on one half my screen and the site as it sits on the server on the other half of the screen really helps me quickly spot problems if I upload something and it doesn't display.
Anyway... DW is not the only option for loading files to your server.
Best wishes,
Adninjastrator

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how d

I have purchased itunes tv series, movies and music and have transferred them onto an external hard drive and tried to play them on my tv on a media hub. The file will not load. Is there some form of blocking by itunes or another p[roblem and how do I fix it?

You can't fix it. iTunes bought content is DRM protected. so it can only be played on authorized devices. i.e devices associated with the apple Id used to purchase the content. Its copyright protection that the rights owners demand.
Circumventing it, is illegal in most countries, and as such cannot be discussed here. If you want to play the content you'll need to connect your computer directly to your TV, or use some other device you can authorize for iTunes content such as an iPad, iPhone , iPod touch or Apple Tv.

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

PDF files will not open in a Safari (v 6.0.5) browser window

PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
Adobe Reader version 11.0.04 is now working for me.
Thanks for the help and the solution C.F.McBlob

Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

Linda Feltner wrote:
> I cannot import or open vector files in Freehand 10. I
just get large
> Xs instead of the image. I have a MAC OS 10.3.9,
Freehand 10. I'm
> trying to import some small files that are either .ai or
.eps files
> (all are vector) that open fine in Illustrator 10 (so I
know they
> work), but I can't use them in that program. I've tried
adjusting in
> Freehand Preferences the 'convert editable EPS files" ,
on and off. I
> tried adjusting the 'Embed...." selection on and off.
Can anyone tell
> me what thing I'm doing wrong. I have two files, they
are map
> boundaries, that need to scale and adjust their color
and line width
> over an aerial map. This can't be difficult, but I must
be
> overlooking something. Many thanks in advance. Linda
>
Freehand can't convert EPS files into editable vectors. I
usually run
EPS files through Illustrator and then into Frehand. If you
don't have
Illustrator you can convert the EPS into a PDF and that
Freehand will
sometimes convert into editable vectors (though it does
involve a lot
more clean up than going through Illustrator.)

File will NOT Publish in Captivate 5.5

Similar Messages

Maybe you are looking for