File with time stamp
Hi All,
I using RFC to file scenario ,in this when file is created it folder it is coming with date and time stamp.but i am not using add time stamp in processing paramerts.i have checked the file name in communication channel monitoring it is coming without timestamp
but in folder file is getting created with time stamp.
Regards
Hi Gangadhar,
In the receiver file adapter, under Processing tab, see the value of File Construction Mode.
This value should be Create instead of Add Time Stamp.
After making the changes save & activate the file receiver channel. The output file then will not have timestamp appended to its name.
Regards,
Gautam Purohit
Similar Messages
-
Can someone help with a previous post labeled "Writing to a data file with time stamp - Help! "
Can someone possibly help with a previous post labeled "Writing to a data file with time stamp - Help! "
Thankswhats the problem?
Aquaphire
---USING LABVIEW 6.1--- -
Writing to a data file with time stamp - Help!
My program currently asks the user to enter a path to save the data from my virtual channels. What I want is to have a default directory to store my data in and also have the file name that is created to be the date. I tried to use create open or replace but I cant get it to work. Any suggestions would be great. Also and comments to the code would help out a lot.
Thanks
Attachments:
Test.vi 141 KBLook at the attachment. It uses a front panel path control set to only select a new or existing folder (right click and Browse Options). Then, using a Build Path and a Format Date/Time String, a full path to a file is created. Pass this to your Open/Create/Replace File.
Attachments:
Date to File Name.vi 13 KB -
Log GC status to a file with time stamps
Hi,
I ran a java app using java -Xms64M -Xmx256M -Xloggc:GClog.txt
and it prints out the following to the file GClog.txt
0.000: [GC 4095K->276K(65088K), 0.0113338 secs]
Can anyone pls tell what all these numbers mean
I know what the 65088K means. It's the initil heap size,
but i'm not sure how to interpret 4095K->276K
ThanksAmount of heap allocated/used/whatever-the-term-is before and after GC.
-
How to read multiple Digital samples and plot a chart with time stamps
Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input'
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi 27 KB
DigitalNSample.vi 27 KBHi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi 27 KB -
File name for append processing mode with time stamp
Hi Experts
we are doing file to file scenario using the processing mode as Append.
the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
Please provide your valuable comments.
Thanks
FaheemHi mohamed,
I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
Regards,
Murugavel -
Mail attachment with time stamp
Hi
My scenario is Proxy to Mail.
On receiver side I am getting the data as an attachment but i want that attachment with time stamp.
How to add time stamp to the attachment in reciever mail adapter.
Regards
Sowmya
Edited by: Sowmya on Aug 28, 2008 12:24 PMhi sowmya,
The bellow link for MessageTransformBean..
[http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
In that ContentDisposition is used to fill the value for Attachment file name..
Its allows the value accordingly "RFC1806" Note..
RFC1806 allows accordingly RFC822 ..
Check RFC822 ..
5. DATE AND TIME SPECIFICATION
Regards,
Prakasu -
TDMS viewer not showing data with time stamp
Need help with time stamping data in a TDMS file generated by DAQ Assistant.
When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
Solved!
Go to Solution.Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!
-
Apache Trinidad is running with time-stamp checking enabled.
Experts,
Contents of my web.xml file
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>When my application runs i get the following on the weblogic console
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
Isnt it a bit strange ? Please advise what is wrong.
thnks
jdev 11.1.2.1If you're talking about the integrated WLS, time-stamp checking is automatically enabled no matter what so that changes you make in the IDE can be picked up. It's nothing to worry about.
John -
hi, is there a way to bounce with time stamp in logic? can logic automatically put time stamped files in the right place in the arrange window?
thx, wHi, Acmarie.
Thank you for visiting Apple Support Communities.
To see what time a message was sent or received. Drag any bubble to the left. Below, I have included the user guide which references this new feature on page 66.
iPhone User Guide
Cheers,
Jason H. -
Advertisement Details of Specific Computer with Time Stamp
Hello Guys,
Could you please help me how to get Advertisement Details of Specific Computer with Time Stamp?
Thanks in Advance.
MukhyapranaIt's true that there is no reliable install date, but IMO last status time for an advertisement is usually close enough.
Select r.name0, adv.advertisementname, stat.laststatename, stat.lastexecutionresult, stat.lastStatusTime
from v_r_system r
inner join v_clientAdvertisementStatus stat on stat.resourceID = r.resourceID
inner join v_advertisement adv on stat.AdvertisementID = adv.AdvertisementID
where r.name0 = 'clientname'
order by adv.advertisementname -
Inserting Current Date with time stamp in oracle database
Hi Experts,
I want to insert the current Date and time stamp in a field in the Oracle Database Table.
I am able to insert date but i am not able to insert the date with time stamp. Any Suggestions??
Thanks
NaveenNaveen,
Do you want to get current date (from sysdate) with a specific format or transform a value containing a date/time value to insert it in ORACLE ?
Usually, you insert current datetimestamp in a date field using this :
TO_DATE(sysdate,'dd/mm/yyyy hh:mi:ss')
you may have to tweak the format pattern ('dd/mm....') according to your needs
if you want to transform a date, use something like this:
TO_DATE(your_date,your_format)
but make sure your format is compliant with your date, ie
TO_DATE('31/12/2008','MM/DD/YYYY') could raise error (litteral does not match) cuz ORACLE can't recognize 31 as a month pattern
Chris -
Hii,
I have an issue with using where clause with time stamp. My requirement is to
select * from driver_on_policy
where last_change_datetime = '2001-03-06 19:00:06'
date is in this form 6/3/2001 7:00:06 PM
thnks
samIf you want to use '6/3/2001 7:00:06 PM', then
where last_change_datetime = to_timestamp('6/3/2001 7:00:06 PM','DD/MM/YYYY HH:MI:SS PM')If you can use a literal string in ANSI standard YYYY-MM-DD HH24:MI:SS format, then just
where last_change_datetime = timestamp '2001-03-06 19:00:06' (That 'DD/MM' might need to be switched around to 'MM/DD' if you are in America.)
Message was edited by:
William Robertson -
Can i upgrade to 10.6 snow leopard then restore files with time machine?
I have an early 2006 iMac with 10.5.8, and I am having hard drive problems. I want to reformat my drive, then install 10.6. Can I do that, then restore my files with Time Machine? Will it restore applications?
Yes, you can use Migration Assistant or Setup Assistant. When you launch SL for the first time it will ask if you are migrating from another Mac, select yes and then indicate the TM drive. Connect the TM drive to the machien and let it migrate what you want (Settings, Apps, Data etc..). It's important to connect the TM drive via USB or Firwire, DO NOT select Wi-Fi.
-
Read file latest entry with time stamp from unix
Hi
I have a log file which is being generated with an entry like this
Product20080228185707,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080229151029,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080320163241,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080229151111,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
I know how to read the file from Unix but How do I pick the entry with latest time stamp ?
Please help urgent
thanksHi,
Do like this.
1. Declare table with two fields as name(255) type c, timestamp(14) type n.
2. Loop at your entries and push entry name in name field and time stamp in timestamp field. You can move time stamp as: move file+7(13) to timestamp.
3. So your new internal table will have entry names and timestamp.
4. Now sort itab by timestamp descending.
5. Read itab index 1.
this will give you latest entry from unix.
i hope this helps,
Ags,
Maybe you are looking for
-
"User names cannot start with a number" error while adding a user
Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric user id ? I got an error "User names cannot start with a number" while trying to add users with all numeric user ids. I am using "portalAppTools" web app provided wi
-
To upload vendor master using BDC
how to upload vendor master details using vendor master, the problem is while recording XK01 application i am unable to fill email,time-zone,street 4,.. but these are visible while i am creating with out recording.. i am having fields for these in my
-
Hi All, I am trying to Enhance my MAU Application from the backend perpespective. I am following one Enhancement Guide. It has a process, through a BADI, in which I can pass some extra fields to the MAU Application on my client. We can set the Enhanc
-
I am getting a message that my version of Firefox 3.5.6 is no longer secure against attacks, yet when I try to update to Firefox 4, I'm told that my Mac system isn't compatible even though I have system 10.5.8 and the requirement is supposed to be 10
-
Using ipod on windows after using it first on mac
Alright, i really hope someone can help me. When i bought my ipod i first used it at the store with friends and got lots of songs and vids from the apple computers at the store. Little did I know that once you use apple first, you can't just go to wi