File- XI- IDoc: Idoc header data not saved correctly

Hi guys!
I have a very strange problem:
I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved.
This scenario worx fine in QA, but not in PRO.
Any ideas, what to look at?
Thanx a lot! Olian

Hi,
check the IDoc which was in PROD. and see the ibound status and actual reason .
depending upon the actual status you can resolve the issue.
Chilla

Similar Messages

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

HT4753 would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

would number automatically save an .xlsx file I opened and modified but not saved? I've lost a file with many edits...

kearly - thanks a million for posting both the question & the reply! I just unchecked that little box by accident, & couldn't figure out for the life of me how to fix it. Thanks again!!

Settings not saved correctly

Saving that always a file should be opened with a program does not work correct.
I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

Div header tag - not displaying correctly

I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not!
The header contains three images; a logo, a banner (text), and a picture of a castle. These should display in a line.
When I first set it up, I realised that the castle picture was normally ending up below the other two on smaller screens etc.
So I changed the dims for my div container from min 760px/max 1260px, to a set width (960px). I then rejigged the three images so the widths were within 960px, with some to spare for the spacing (total widths of the three are 900: hspacing another 20 pixels). There is no padding/borders defined. Therefore the total should be well within the 960 width (?).
It looks fine on my PC (widescreen); in 3 browsers, using the restore down menu command (ie to make it not full screen), and by using the Dreamweaver multiscreen preview (phone, tablet, smaller desktop). It wasn't ideal (as scrolling required), but at least meant the header (and the rest of the screen) displayed correctly, ie in a horizontal line (and then sidebar - content - sidebar).
If I set my container width much smaller, most of the screen will be green (the body) in big screens.
If I rejig the dimensions, it's all a bit hit and miss (and why don't the current dimensions work?).
Do I need to define the width of the header (as well as the container)?
Help! Thank you
http://hertfordcarnival.org.uk/dev/Index.html

Hi there, I started off using one big image, but it didn't look right with regards to size and placing (ie I wanted the logo on the left edge, the castle on the right edge, etc). When you say slice, what do you mean? One image in from fireworks, and then ... ? Thanks again
Date: Wed, 7 Dec 2011 01:37:10 -0700
From: [email protected]
To: [email protected]
Subject: Div header tag - not displaying correctly
    Re: Div header tag - not displaying correctly
    created by osgood_ in Dreamweaver - View the full discussion
Datafan55 wrote: I thought I had resolved an issue with a div header tag, but - as per a reply in my 'text as gif' thread, possibly not! Why not just use one big image then you wont have a problem of with the alignment. Certainly don't use 'vspace' and 'hspace' to position the images. If you want to use 3 seperate images start by setting them us as one complete image then slice it into 3 images. Then use the following css to position the images side by side. #header img If the total sum of the width of the images is the same or does not exceed 960px then the images should be in a nice row side by side. They will actually sit side by side without using 'float' but you'll get a small gap between them which will be added to the sum of the width which will exceed 960px causing the third image to drop onto the next line.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4068499#4068499
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4068499#4068499. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

I am trying to assign delegation to a user and I receive the following message.
The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.
We are using 2010 for the server and client. There are only specific mailboxes that this is happening for after being migrated from Lotus Notes. The user can use their mailfile fine however it is just the delegation that appears corrupted somehow.
I'm not sure how to fix this. I have checked the access through the security tab in ad and that looks fine.
Any help would be appreciated.

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

Hyperlinks not saved correctly in PDF and Excel

Hi,
I have a few reports with hyperlinks to other reports that contain multiple input parameters, which makes the links very long. ( greater than 400 characters )
When the reports are saved as excel, I am unable to invoke the child report on clicking the link as the link is not saved entirely ( can see that when i try to edit the hyperlink in excel ). Therefore the child report opens but prompts for inputs as not all the inputs are passed
When saved as pdf, the link is not saved correctly and i cannot invoke the child report at all
Please can you suggest a solution/workaround? Alternately is it possible to disable the hyperlinks when saved as excel/pdf?
Regards
Sameer

Hello,
I think this is a limitation in Excel where URL syntax has to be 255 characters or less
In order to prove that it's coming from excel and not BO, try in excel to create a false hyperlink which contains more than 255 characters.
A workaround might be to modify the cell as text and will not be recognized as a URL. So you should get it entirely.
Please let me know if it helps you
Regards,
Philippe

Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

Hi,
Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
She is also getting this error when she tries to remove a delegate.
I have tried recreating her mail profile.
I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
She is on Exchange 2010
Any assistance would be appreciated.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

Idoc Receiver - Header Data does not update

Hi there
I have an Idoc receiver in a scenario where I send a Idoc from a file to the R/3 system. My config is all fine but the Idoc status in we19 shows red. My Header data for the idoc is incorrect. The idoc is WALREQ01. In my Message Mapping Im setting the SDNPOR, SDNPRT, SDNPRN, RCVPOR, RCVPRN to the correct values and the I activate the scenario but in we19 it still shows the incorrect idoc header. It does however change the idoc segment data, just not the header. Is there maybe some other place I have to set the Idoc header data?
Thanx,
Jan

Hi Jan,
From help.sap:
Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values. See also: Fields of the IDoc Control Record
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
Carlos

Data not saving in flowable form

Hi,
I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved. The data entered into Attachment B and the rest of the form does save.
Can I send the file to someone to have a look?
Thanks.

Please send your form to [email protected]
I will try to look into the issue..
Nith

Data not saved in database

hi,
i'v a prob. that once i create quation through va21 then it create and saved data.
now when i create sales order through va01 then it show data saved and gave the sales order no.
but when i 'm going to change it then message comes order not in data base.
when i saw the data in table like vbak/ vbap then i found no data.
what is the prob.
pl. help me.
mukesh

Hi Mukesh,
May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
Regards

Response data not saved in PDF

Dear All,
I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
I saw my message in the form when the WS is finished but I saved the PDF on my PC.
When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
Thanks to help me
Kind regards
Véronique.

Dear all,
Can someone help me ?
All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
If I change the field (add some character after the return value from SAP) and I save, the value is kept.
Could someone tell me how to do ?
My button is an Execute one with the data connection on my web service.
If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
It is important !
Thanks
Kind regards
Véronique

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

MIGO change header data before saving

Hi all,
I want to update header data (budat) before saving the material document with MIGO.
Has anybody an idea?
I tried with Badi: mb_document_badi or similar user-exit
MB_CF001 but with none of these I can CHANGE header data.
Is it possible?
Thanks a lot!

check this
MB_DOCUMENT_UPDATE
regards
Prabhu

File- XI- IDoc: Idoc header data not saved correctly

Similar Messages

Maybe you are looking for