File - XI - Idoc : mapping issue
Hello gurus,
I have a mapping issue:
I have a mapping between FICABillingNotification to FKK_EBS_DOC_TREE
Some fields are mapped one to one, others a mapped to constants.
But for some reason i don't know, not all fields get the right value.
For example:
Working:
Constant 1 --> BEGIN
Constant LS --> RCVPRT (Receiver Partner Type)
Not working:
Constant FILE-->RCVPOR (Receiver Port)
I had an other value the first time i tried it, but now i changed it to FILE but this value is not used by the mapping.
Any help would be welcome
Thanks
Thomas
Edited by: Thomas Pary on May 28, 2008 3:36 PM
This was allready done (sorry i didn't answered that question).
But Ok now i see, that for this RCVPOR the value of the constant "FILE" is mapped, and i can see it in the payload in SXMB_MONI after the mapping. But it isn't populated to the IDoc field :-s
Another problem is, that like the one said above, some of my values are not mapped :
<FICAExternalBilling>
--<DocumentHeader> mapped to EF1KK_EBS_DOC_HEADER
<BillFromId>25001254</BillFromId> mapped to REF_DOC_NUMBER
<PostingDate>20080520</PostingDate> mapped to POST_DATE
<DocumentDate>20080520</DocumentDate> mapped to DOC_DATE
<OriginTypeId>IV</OriginTypeId> mapped to EXT_DOC_TYPE
<ObjectType/>
<ObjectKey/>
<PendingCommitmentGroupID/>
<InvoiceReferenceID/>
<DisputeDocumentReferenceID/>
--</DocumentHeader>
The value of OriginTypeId is not mapped, but the value of DocumentDate and PostingDate are mapped.
Similar Messages
-
Flat file to idoc mapping issue
Hi Gurus,
i had a flat file format in sender side as below:
H_ID TYP_CODE line_elemet Quantity
5896 STANDARD 1.transmitter 1
5896 STANDARD 2.xxxxxxxxx 1
5896 STANDARD 3.yyyyyyyyy 2
6895 STANDARD 1.aaaaaaaaa 1
9436 STANDARD 1.bbbbbbbbb 4
9436 STANDARD 2.ggggggggg 3
The above file need to be send to an Idoc.
for which same header_ID values should create only one header segment, under that many a line segments should create as many line items appear on that header_id value.
Here my query is how to suppress the repetetive header values to create onlyone header segment. And how to create as many line_item segments as the number of line items appear.
points obvoius for the response
Thanks in advance,
Sekhar.About map problem I suggest youn to see the following link that are really helpful to improve knowledge about mapping:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
I suggest you to see the following link to learn more about mapping:
Mapping functionality in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
SAP Exchange Infrastructure - Graphical_Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6658bd90-0201-0010-fbb6-afe25fb398d3
SAP Exchange Infrastructure - Graphical Mapping Exercise
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fd5ebd90-0201-0010-d697-91374d5b5190
SAP Exchange Infrastructure - Graphical Mapping - Advanced
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/be05e290-0201-0010-e997-b6e55f9548dd
SAP Exchange Infrastructure: Mapping Patterns - Understand Context Handling in Message Mapping - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
SAP NetWeaver Exchange Infrastructure Mapping Troubleshooting - Webinar Powerpoint
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e01e9400-9e81-2910-20a5-a862945a5e98
Mapping Lookups a RFC API
Mapping lookups - RFC API
XI 3.0 New Mapping Features
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
I hope these links will be usefull.
Regards,
Salvatore -
Hi,
I am mapping a flat file to idoc in xi. If I execute the test data it works fine. But in actual run, it gave me the following mapping error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_MT_APPayment_to_FIDCCP02_: Runt
imeException in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
Is it due to some mapping error or some basis config issue?
Thanks,
JassiHi Jassi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
Check the following link:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Amaresh -
File to Idoc - EOF issue.
Hi,
I am working on file to IDoc scenario. But facing a problem...
The source file contains ..EOF.. as a last line in the file. Actually, there is no need to map it to any of the field in IDOC. Just I have created a element in the source data type and ignoring it...
But I am getting this following error message...
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 43: missing structure(s) in last recordset
Please help me to resolve this issue...
Thanks in advance!!!
Regards,
Vivek LRHi,
R u using content conversion in file adapter.Check ur content conversion parameter it is not able to convert the file to XML structure.
wat do u mean by "I have created a element in the source data type and ignoring it... " I think u r not mapping it in mapping right?
chirag -
Hello Friends,
I am facing an issue during File To IDOC Scenario.
Sender side: Text file
It contains data:
name,surname,7894561230 i.e. phone no.
My sendor data type is also desined in same way.
I am facing given below wrror in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_file_to_idoc_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idoc_:</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'.
I tested message mapping. It is working fine.
Kindly suggest me for above error. How I can resolve it?
Regards,
NarendraIt contains data:
name,surname,7894561230 i.e. phone no.
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idocc
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'
can you tell in what format is your source structure? I mean is it an XML or a CSV file?
If it is a CSV file then you need FCC....but then in this case the error should have been thrown by the channel itself and the message wont have come till mapping step....
If your source file is really in csv format then apply FCC....many blogs, references are readily available on SDN.
Regards,
Abhishek. -
File to IDOC mapping - Message Type WMMBXY
Hi
I am working on FILE to IDOC Scenario. I have records like the following in my file:
301 ABC455559 03.11.2009 02u0391B13 01 OBAF515150 G378378 15 PC 20090311 MIGO
301 ABC455560 03.11.2009 02u0391B13 01 OBMN515040 437482 50 PC 20090311 MIGO
Using an ABAP Program I added DTL in front of every record as I have to convert text file to XML mapping.
DTL 301 ABC455559 03.11.2009 02u0391B13 01 OBAF515150 G378378 15 PC 20090311 MIGO
DTL 301 ABC455560 03.11.2009 02u0391B13 01 OBMN515040 437482 50 PC 20090311 MIGO
When I did this my mapping is fine from source side. For the above two records there are two records created in xml format. But only one record is created at target side. I changed message type WMMBXY to unbounded in the external message but still only one idoc is created.
Please let me know if anyone faced the same issue.
Thanks
Naga1..Please mapping ur sorce node (has occurance 0..unbound) with target node.
2...change occurance in message tag in mapping for IDOC message
3...change occurance in message mapping for IDOC message
Regards,
Manisha -
PI7.1 File to Idoc scenario issue.
Hi,
We recently had an upgrade from PI7 to PI7.1.
When testing File to Idoc scenario ,we had an issue as below
Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">Error during lookup - com.sap.aii.mapping.lookup.LookupException: Error when calling an adapter by using the communication channel GeneratedReceiverChannel_RFC (Party: , Service: ED2_200, Object ID: a8f14398a9993dccadbe983d401f693a) The channel with object ID a8f14398a9993dccadbe983d401f693a could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache.</Trace>
<Trace level="1" type="T">Error when parsing RFC Response - null</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
This was working fine before upggrade.
Any changes required to be done in scenario?
Pls let me know.
Thanks,
Srinivasado a CPA cache refresh
http://hostname:port/CPACache/refresh?mode=full
also check if the object is visible in tcode SXI_CACHE..
also refresh the SXI_CACHE -
Hi all,
i'm getting an error from SXMB_MONI in a scenario File to Idoc.
I have done the mapping from source file and Idoc CREMAS03, when i try to test from Integration Repository it's all ok, but when the scenario is executed i find this error in Idoc Adapter :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
The field BEGIN in idoc structure is filled with constant value 1, than i dont understand the error.
This is the xml source file :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Vendor xmlns:ns0="urn:tbit40:workshop:group01:legacy">
- <Address>
<Country>IT</Country>
<Zip>001</Zip>
<City>ROMA</City>
<Street>SATTA</Street>
</Address>
<Currency>USD</Currency>
<SearchTerm>TEST</SearchTerm>
<LastName>GUIDA</LastName>
<VendorNumber>44332</VendorNumber>
</ns0:Vendor>
Any help is really appreciated.
Thanks.Hi all and thanks for your answer.
My problem is that for what i can see all Idoc attribute (like the attribute BEGIN) are mapped with constant value.
In taget source i can see : BEGIN = Constant([value=1])
What i dont understand is why when i execute the scenario it ends with this message :
<SAP:P1>MSGGUID EF7E2140A08811DDBE1202004C4F4F50: Tag #TEXT found instead of tag IDOC BEGIN=</SAP:P1>
It seem to me that the tag BEGIN is not filled with value, i also tried to copy the source xml file directly from SXMB_MONI (from payload) and test it in Integration Repository mapping section, but here is all ok and the test end succesfully. -
Hi all
I dont know much about idocs. I am creating a file to idoc scenario. i have done with(hope so) all the other settings, design and configuration. BUt dont know how to do the mapping.how the control segment fields have to be mapped. what are the mandatory fields in idoc?Hi Aarthi,
You can leave the control records of the Idoc blank since XI fills them up. This is because XI would be the sender for the idoc. If you select "Header mapping" then you have to map control records else not.
Also in the idoc data segments all fields with a red dot are mandatory. If you do not have a field from the file to map with the mandatory idoc field then either you can suppress it or map it to a constant.
Hope this helps.
Regards. -
Hi Experts
I have facing some confusion when i am doing mapping for my scenario FILE to IDOC.
The IDOC Structure is as follows
HeaderRecord 0-1
DataRecord1 0-unbounded
(Subnode)DataRecord2 0-unbounded
(Subnode)DataRecord4 0-unbounded
DataRecord5 0-unbounded
(subnode) DataRecord6 0-unbounded
TrailerRecord 0-1
when the DataRecord1 is executed, an idoc is generated and all the DataRecord2,DataRecord4,DataRecord6 shld come under that particular Idoc. And when another Idoc is generated,all the DataRecord2,DataRecord5,DataRecord6 shld come under that particular Idoc.
How to achieve mapping for this??
please help me out.
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:56 AM
Edited by: vemuganti naga phalguna on Oct 27, 2010 7:59 AMHi
1) Source file is Text File.
sample source data.
A|20101006142345|SAPQMP|40|
B|5999|R00003D||N|20072008|Unknown|
C|T0014|M1556||colourless Pale yellow||Receipt-Bulk|1|Yes|Y|Text||
C|T0001|M1556||Limpid liquid ||Receipt-Bulk|1|Yes|Y|Text||
C|T1379|M1398|18||23|Receipt-Bulk|1|Yes|Y|Number|mm²/s|
B|5998|R00014A||N|20072008|Unknown|
C|T0014|M0211||2.0||CoA|1|No|Y|Text||
C|T0014|M0211||2.0||Receipt-Bulk|1|No|Y|Text||
C|T0014|M0211||2.0||Transfer|1|No|Y|Text||
C|T0051|M0271|97|||CoA|1|No|Y|Number|None|
C|T0073|M1356|Pass|||Receipt-Bulk|1|No|Y|||
C|T0073|M1356|Pass|||Transfer|1|No|Y|||
C|T0025|M0331||0.880||CoA|1|No|Y||g/ml|
C|T0025|M0331||0.880||Receipt-Bulk|1|No|Y||g/ml|
C|T0025|M0331||0.880||Transfer|1|No|Y||g/ml|
C|T0001|M1556||Clear & Bright ||CoA|1|No|Y|Text||
C|T0049|M0341|28.0||32.0|CoA|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0049|M0341|28.0||32.0|Transfer|1|No|Y|Number|mm²/s|
C|T0042|M0422|||-15|CoA|1|No|Y||°C|
C|T0092|M0578|||16|CoA|1|No|Y|Number|% Loss|
C|T0021|M0199||||CoA|1|No|Y||minutes|
C|T0039|M1453|Mktble|||CoA|1|No|Y|||
C|T0050|M0341||5.1||CoA|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Receipt-Bulk|1|No|Y|Number|mm²/s|
C|T0050|M0341||5.1||Transfer|1|No|Y|Number|mm²/s|
C|T0026|M0412|210|||CoA|1|No|Y|Number|°C|
Z|20101006142355|SAPQMP|40|
where Records A indicate File Header, Z indicates File Trailer
Recodrs B indicateds Material header and Would be repeating multiple times
No. of B Records = No. of Idocs generated with corresponding C records data which indicates Component Rows (multiple)
i.e as many B records file contains, that many Idoc will be created
For Mapping I require B and C Records. Field Separator is Pipe | symbol
I need to Ignore A B C Z
How to define the source structure and the respective FCC Parameters
please help me out -
Flat File to IDOC Mapping requirement to generate Multiple Segments
Hi Experts,
I got a requirement were i have 2 records in a file and i need to generate 2 IDOCs with multiple segments in it.
FILE :
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
Idoc should generate 2 IDOCs with multiple segments as shown below
I have imported the IDOC and changed the occurrence to " unbounded "
The Basic IDOC Type : WMMBID02
I need to generate Multiple segments of E1MBXY1
i.e.., First IDOC should contain two E1MBXY1 segments
Second IDOC should contain Four E1MBXY1 segments
IDOC1 : WMMBID02
Segment : E1MBXY1( 2 segments)
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
IDOC2 : WMMBID02
Segment : E1MBXY1 ( 4 segments)
10/01/2010 101 KRNA ic_quantity 30-0257 3526 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 30-0257 3521 1 1 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3526 1 2 ea 110000 10
10/01/2010 101 KRNA ic_quantity 90-0005 3521 1 2 ea 110000 10
Can anyone suggest me how to generate IDOCs with multiple segments
what are multiple ways of generating it
Whether it can be achieved using Multi-mapping or I need go for UDF
If any one has done has done this type of requirement ,please share the points.
Thanks
SaiBasically you need to generate idoc per record in the flat file. During fcc conversion you convert flat file to xml structure at the sender side. In the mapping use xml file structure source and idoc as receiver structure. You just export idoc and update the idoc segment 1 to unbounded. Please follow the michael blog for file to idoc multimapping without bpm. Yes without bpm it is possible.
see this link... This will answer your requirement.
https://wiki.sdn.sap.com/wiki/display/XI/File%20to%20Multiple%20IDOC%20Splitting%20without%20BPM
>Whether it can be achieved using Multi-mapping or I need go for UDF
you dont need udf for this. -
Query on Context Handling ( File to IDOC mapping )
Hi All,
I've a scenario from file to IDOC. The structure of file is as follows.
Struct ( occurs unbounded times )
|
- Name
Str. of IDOC
Node
|
- name1
- name2
- name3
- name4
The problem is that the name in file can occur many times.
So if say name occurs 2 times in the file then it has to be mapped to name1 and name2 in IDOC.
If Name in file occurs 3 times it'll be mapped to name1, name2 and name3 in IDOC.
Am looking for some help.
Thanks,
Joe.Hi Joe,
For every name in the file, you will have to map the value to the name field in the IDoc. Use SplitByValue node function available in the graphical editor. You will be able to achieve this mapping. For more about the usage, here's the documenation and a blog(where an example has been given):-
http://help.sap.com/saphelp_nw04/helpdata/en/21/3bb8c495125e4eb5969f0377885fe0/frameset.htm
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Regards,
Sushumna -
Need to generate 2 idoc"mapping issue"
Hi Experts,
When the Purchase_order_type is coming like HIGH,REGULAR,NEW,BOUNCED. In this case i need to generate 2 idoc, based on HIGH is one and Other than HIGH is one, even though if it's REGULAR,NEW,BOUNCED.
I can't generate. pl suggest
rgds
selvamHi,
Please make sure you will sort the data in your select query.
Now, you need to have two idocs in mapping. Click on Duplicate Subtree to have second IDOC. Now lets assume, your first IDOC represents mapping when ORDER TYPE is HIGH and your second IDOC represents mapping when your ORDER TYPE is not equal to HIGH that is NEW, BOUNCED, REGULAR etc.
I have defined Source and Target data type as follows.
Source Data Type:
SDN
<Row>
<CQ_NO/>
<ORDER_TYPE/>
<LINE_NO/>
</Row>
Target Data Type:
SDNTarget
<IDOC>
<Node>
<CQ_NO/>
<ORDER_TYPE/>
<ItemNode>
<LINENO/>
</ItemNode>
</Node>
</IDOC>
Mapping for IDOC 1:
IDOC:
Order Type -->Fix Values --> remove context
Fix Values (This should have default u201Cfalseu201D and HIGH = true)
Concatenate Output of point 1 with CQ_NO (Context of CQ_NO should be at SDN)
Output of point 3 --> Split by value (value changed) -->collapse context
Output of point 4 will be first input to u201CStart withu201D function and second input will be constant u201Ctrueu201D
Output of Point 5 --> create if --> IDOC
Node:
Map with constant
CQ_NO:
Order Type --> Fix Values --> remove context
Fix Values (This should have default u201Cfalseu201D and HIGH = true)
Concatenate Output of point 1 with CQ_NO (Context of CQ_NO should be at SDN)
Output of point 3 --> Split by value (value changed)
User Format By example. Pass CQ_NO (Context of CQ_NO should be at Row) as first input and second input should be output of point 4.
Pass Output of format by example that is point no 5, to collapse context --> Split by value (Each Value) --> CQ_NO
ORDER_TYPE
Order Type --> Fix Values --> remove context
Fix Values (This should have default u201Cfalseu201D and HIGH = true)
Concatenate Output of point 1 with CQ_NO (Context of CQ_NO should be at SDN)
Output of point 3 --> Split by value (value changed)
User Format By example. Pass ORDER_TYPE (Context of CQ_NO should be at Row) as first input and second input should be output of point 4.
Item Node:
Order Type --> Fix Values --> remove context
Fix Values (This should have default u201Cfalseu201D and HIGH = true)
Concatenate Output of point 1 with CQ_NO (Context of CQ_NO should be at SDN)
Output of point 3 --> Split by value (value changed)
Output of point 4 will be first input to u201CStart withu201D function and second input will be constant u201Ctrueu201D
Output of Point 5 --> create if --> IDOC -
Issue in segment creation for File to IDOC mapping
Hi,
I have file with many feilds, i need to create a segment in IDOC for unique combination of 2 feilds.
eg:
408
430050
segment
208
430050
segment
208
430050
208
460100
segment
208
452010
segment
408
432000
segment
208
432000
segment
the value for the combination of first column and 2nd column are equal it should trigger one segment instead of 2segments else(for different combination) trigger the segment
eg from table:
in table for 208,430050 is occuring twice but it should trigger only one segment(unique combinations of 2 columns), for all other combinations it should trigger one segment for each.Hi Swapna,
You can use below mapping.
UDF:
Execution type : All Values Of Context
public void removeDuplicates(String[] context, ResultList result, Container container) throws StreamTransformationException{
HashSet<String> hashSet = new HashSet<String>();
for (int i = 0; i < context.length; i++) {
if (hashSet.add(context[i]))
result.addValue(context[i]);
else {
result.addSuppress();
Reards,
Praveen. -
Big File to IDOC - performance issue
Hi All,
I am trying to create scenario where I have a file with aproximately 10 000 rows. From each row I am creating one IDOC and want to send it to R/3. Interface looks fine - it is working, but it is killing XI box for some time and u cant access it.
Full scenario look like this
File -> BPM (for 1:n) -> IDOC
I tried to find some solutions for doing the workload smaller by splitting file to less lines (500rows per file) but then file adapter picks up all file and processed them in parallel. So this is new scenario:
BigFile -> XI -> File -> BPM(1:n) -> IDOC
I tried to put second file sender communication channel as EOIO but looks like this does not work - or messages from queue are processed to fast. When one message starts BPM another file message start to be processed.
Do You have any ideas on how to make it more responsive and less performance impact?
thanks in advance.
DawidHi ;
Since mappings are processed by the J2EE Engine, the maximum available Java heap may be a limit-ing factor for the maximum document size the XI mapping service is able to process. Tests have shown that processing of XSLT mappings consumes up to 20 times the source document size (using identity mapping). The maximum available Java heap for 32bit JVMs is platform-dependent. Using 64bit JVM platforms is an option here.
Current maximum heap sizes 32bit
OS
Maximum heap (GB)
Linux
2
Windows
1.2 1.4
The Java heap is limited by the heap limit of the process (may be limited by address space because operating system code or libraries may also be loaded within the same address space). Also, Java internal memory areas such as the permanent space for loading Java classes must fit into the same address space.
Java VM tuning is one of the most crucial tuning steps, especially for more complex scenarios. For information about setting baseline JVM parameters, see SAP Note 723909. You must also take plat-form-specific parameters into account (for example, JIT compiler settings). The impact of Garbage Collection (GC) behavior especially may become a critical issue. Overall GC times for the J2EE appli-cation should be well below 5%. For more information about GC behavior and settings, see also SAP Note 552522.
Specific to XI is the fact that you sometimes need to process large documents for mapping or when using signatures. This can lead to excessive memory usage on the Java side. Therefore, you must observe Garbage Collection and the available Java heap in order to evaluate performance and pre-vent OutOfMemory exceptions. Since XI mapping is processed by stateless session beans that are called using a JCo interface, this may lead to a reduction of parallel JCo server threads within the JCo RFC Provider service of a J2EE server node (you can compensate for this by adding J2EE server nodes).
Mudit
Maybe you are looking for
-
How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?
-
I can't use Time Machine with a USB drive plugged into an Airport Extreme.
I connected an external drive to the USB port of an Airport Extreme, intending to use it with Time Machine and one of the laptops in the Wi-Fi network (call it Laptop). The drive is visible from the Disks tab of each computer's Airport Utility but fr
-
NAS death causing "There was a problem connecting to the server" error...
Hi All, My entire music collection was lost recently, when my Western Digital "MyBook" network drive exploded in a way that gave me no chance of data recovery. Now, every time I open iTunes, I am shown all the tracks, but upon accessing (or trying to
-
Import material moving average price is showing negitive.
Dear GURUS I have aproblem in Import material moving average price problem My user put the amount 10000 EUROS instead of 10000 INR in P.O , I am getting the below mentioned error. Moving average price for material is negative: 2428014263 1100 SPR_IM
-
How to Access oracle DB table through SAP..problem in code
Hello Guys I have to Access oracle table through SAP and need to create a report. From Some source I got the following code . But it's not working , I am not able to update the table as well not able to access the data from table. Can some