FILE2FILE scenario issue

HI ,
    NOW i have problem in file2file scenario
    i use archive mode ,NOW at the sender ,the file was moved to OK but it wasnit transfer to the receive.
   the file   is not initial.
   in SXI_MONITOR ,there was no message about the file .
   help.

Hi Satish
there is no error in SENDER CC , because several files were done together ,only one of them wasnit transfered to the receiver
in the monitor can't see the message about the file ,it was just moved to the OK
the file is not initial

Similar Messages

File2file scenario. Issue with Processing mode

Doing a file2file scenario.
The sender comm channel's processing mode is "DELETE"
Scenario is executed successfully and i see the output message also.
But the input file is not deleted.
What could the reason?
regs
Kiran.

Hi,
This will not happen to this scenario if u select the processing mode as delete.the file shld be delete from the source dir.
Check it once again and make sure that you have activated the ID objects after u make any changes.
Do SXI_CACHE also
Regards
Seshagiri

File2File scenario

Hi,
I am trying File 2 File scenario, I have file adapter(both receiver and sender ) installed on my machine.
And I have also 2 communication channels set, I used File adapters in communication channels. When I run this scenario, in Monitor I see my message to be processed sucessfully but I don't see any log in receiver adapter and also no output file.
I have selected File system and not FTP in receiver channel, does this selection creates output file on server disk?
If anyone have File2File scenario documentation, please forward it to me.
regards,
Mustafa

Hi Jason,
I used the said config details, my input file is..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:MTYP_name xmlns:ns0="File_File">Mustafa</ns0:MTYP_name>
I am just doing simple mapping of single field, but I am getting the following error..
<b>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html> <head> <title>Transport Service Error</title> </head> <body> <h1>HTTP/1.0 500</h1> <h3>internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version</h3> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 500 with the description internal server error: com.sap.aii.messaging.mo.MalformedMessageException: Cannot find Main Header in XMBMessage - check the message version XML tag Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></b>
What is the cause of this error and also how do I change the trace logging levels?
regards,
Mustafa

Interface Scenarios - Issues / Messages tab

Hi,
How can I activate the Issues / Messages tab of the Interface scenarios? The tab is available but I cannot enter any issues or messages as I can do under Configurations.
Any inputs are appreciated.
Many thanks,
Dharmi

Hi Dharmi,
I see what you mean but this is not possible for this node. Even if you create subnodes under Interface Scenarios, Issues/Messages cannot be entered here as per other nodes.
Possibly you could try linking a node or document to the Interface Scenarios node and assigning an Issue/Message to the original node above.
Regards,
-Rohan

MM-SUS Scenario - Issue in vendor replication

Hi Gurus,
We are implementing MM-SUS scenario on SRM 7.0 interacting with a system R/3 4.6C and NW PI 7.0.
Now we are workking on the vendor replication from R/3 by mean tx BD14. So we performed all neccesary configuration and functional steps on R/3 system and on SRM to be able to execute BD14
After execution we obtain messages about succesfully IDoc creation for vendor data transmission and we see in tx WE02 that everything was OK, current status=03 (data passed to port OK).
But when we login on SRM, we dont' found the correspondent business partner in tx. BP and neither his connection with central vendor group in tx PPOMV_BBP and user/password generation to be sended by automatic email to supplier.
Can anybody help me with this issue?.Thanks in advance.
Regards,
Horacio

Hi,
We have been investigated the issue and for some similar issues the procedure to
delete the entried in VENMAP table and after to do the replication again
have solved the issue.
The steps to delete the entry from VENMAP:
- Goto to transaction SE16
- Open 'VENMAP' table
- Type in the vendor number under 'VENDOR_NO' field, which you
   need to delete.
- Select the record and open in display mode (or just double
   click on the record)
- In the 'Table VENMAP Display' screen, on the transaction bar,
   type '/h' and press enter.
- Click on the screen and press enter.
- You will be in the debug mode. Change the 'code' value to 'DELE'.
- Press F8 and execute the program. Now you will find a 'Delete Entry'
   button.
- Click on the 'Delete Entry' button and remove the entry from VENMAP.
Once this is done, run BBPGETVD transaction and unset 'Address
Comparison to Identify Duplicates'.
We can do other test, Would it be possible to you enter the supplier
data to the BUT000 table manually for the currupted business Partener ?
Partner GUID, Partner can be taken from the VENMAP table.
Please test both procedure and update me if it solve the issue for
the Partner.
Please check the note 548862 FAQ: EBP user administration, topics 2
and 3 about how you can check all EBP users and about BUP_BUPA_DELETE.
We hope this information can help you.
Kind Regards,
Edel.

Email Integration Scenario - Issue with email body content

Hi All,
We have an Email to File Scenario. PI is connected to Outlook server using Sender Mail Channel using POP3. We are able to fetch and display emails correctly for most of the received emails.
However we notice that for Email sent from few Mail server like Yahoo mail, Gmail, Hotmail, we are not getting the Email content correctly.
Issue is happening with Emails sent in HTML/Rich text format (containing Formatting and without any attachments). In the receiver system we see the email is converted to Plain text format. If the same email is sent with some attachment / Embedded Image, we get all the Formatting correctly in Receiver System.
A closer look at Pimon we found the following:
1. When Email is sent with Formatting (without any attachment/ image) in Pimon we see that it creates 2 Payloads (screenshot attached)
2. The First Payload - MainDocument contains the Email content in XML format, but is missing the Email formatting data in it.
3. The other Payload - ([email protected]) contains the actual Formatted Email Content.
Not sure why the formatting data is missing from MainDocument. Instead its coming in other payload. Due to this we are not able to display correct data at receiver end as we parse the MainDocument as our Input Payload Stream
Note: We cannot use payload swap bean, as it will swap the data for all the incoming emails which we don't want.
Anyone faced similar issue? Steps to get proper formatting data in MainDocument..
Suggestions / Inputs will be highly appreciated.
Thanks,
Azhar

Azhar,
We cann't influence the behavior of Gmail, Hotmail. But have to get HTML as main payload, so we have to swap payload (not always, in some cases based on a condition). Please try below Java mapping. In Operational Mapping set "Read Attachments".
package javaapplication1;
import java.io.*;
import com.sap.aii.mapping.api.*;
import java.util.Collection;
public class NewClass6 extends AbstractTransformation {
    @Override
    public void transform(TransformationInput transformationInput, TransformationOutput transformationOutput) throws StreamTransformationException {
        try {
            InputStream inputstream = transformationInput.getInputPayload().getInputStream();
            OutputStream outputstream = transformationOutput.getOutputPayload().getOutputStream();
            byte[] b = new byte[inputstream.available()];
            inputstream.read(b);
            //Loop over attachments and if attachment name starts with 'payload-' swap it with main payload. Edit below logic as needed.
            Collection<String> listAtt = transformationInput.getInputAttachments().getAllContentIds(true);
            for (String att : listAtt) {
                if (att.startsWith("payload-")) {
                    b = transformationInput.getInputAttachments().getAttachment(att).getContent();
            outputstream.write(b);
        } catch (Exception exception) {
            getTrace().addDebugMessage(exception.getMessage());
            throw new StreamTransformationException(exception.toString());

SOAP- Proxy scenario, issue with WS adapter

Hi guys,
i've set up a soap->abap proxy scenario (on 7.1) and want to use the new WS adapter. unfortunately I'm facing some issues. The proxy has been generated properly and I also set it up in soamanager. I tested it from XML Spy and it works fine. So there shouldn't be any problem with it.
But when I try to run the scenario, I get following error:
WS_ADAPTER_SYS_ERROR
<sap:ExceptionChain xmlns:sap="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/SystemFault"><sap:ChainedException><Exception_Name>CX_SOAP_FAILURE</Exception_Name><Exception_Text>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</Exception_Text></sap:ChainedException><sap:ChainedException><Exception_Name>CX_SOAP_CORE</Exception_Name><Exception_Text>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</Exception_Text></sap:ChainedException></sap:ExceptionChain>
System error while calling Web service adapter: <sap:ExceptionChain xmlns:sap="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/SystemFault"><sap:ChainedException><Exception_Name>CX_SOAP_FAILURE</Exception_Name><Exception_Text>SRT: Processing error in Internet Communication Framework: ("ICF Error when processing Web service
I checked the /sap/xi/engine service on both - PI & ECC and it is activated.
Any hint, what could be wrong?
Thanks a lot,
Olian

Hi,
"ICM_HTTP_CONNECTION_FAILED" this error is relaed to ICM. Does your Type H connection "INTEGRATION_SERVER_HMI" works fine.And check integration engine configuration in SXMB_ADM.
And here is a similar thread.
Re: HTTP to Enterprise Services.
Regards,
Reyaz

File To IDOC Scenario issue

Hello Friends,
I am facing an issue during File To IDOC Scenario.
Sender side: Text file
It contains data:
name,surname,7894561230 i.e. phone no.
My sendor data type is also desined in same way.
I am facing given below wrror in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_mm_file_to_idoc_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idoc_:</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'.
I tested message mapping. It is working fine.
Kindly suggest me for above error. How I can resolve it?
Regards,
Narendra

It contains data:
name,surname,7894561230 i.e. phone no.
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_mm_file_to_idocc
In sendor file adaptor I am using 'File' as message protocol.
Should I have to use 'File content Conversion'
can you tell in what format is your source structure? I mean is it an XML or a CSV file?
If it is a CSV file then you need FCC....but then in this case the error should have been thrown by the channel itself and the message wont have come till mapping step....
If your source file is really in csv format then apply FCC....many blogs, references are readily available on SDN.
Regards,
Abhishek.

HTTP to RFC synchronous scenario Issue

Hi Folks,
Currently I'm working on a HTTP to RFC synchronous scenario. Everything went well till i triggered the message. While triggering the message i'M GETTING IS AS BELOW
Result:
http-Status: 500 Internal Server Error
Payload:
<SAP:Error>
<SAP:Category>Application</SAP:Category>
<SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Comcode_</SAP:P1>
<SAP:P2>java.lang.NullPointerException</SAP:P2>
<SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_MM_Comcode_: </SAP:Stack>
</SAP:Error>
I also tried executting the message testing tool to see the trace and the below result I got
<?xml version="1.0" encoding="iso-8859-1" ?>
- <Top>
<First>BeginTrace</First>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is determined</Trace>
<Trace level="1" type="T">Interface Mapping http://www.http-rfc.com IM_Comdet</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping CA9DBC0BCB27311FBAA3C4CE387CEC3B</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 226C2EB123A711DFC0F4FAEBC0A80020</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Comcode_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 3</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Comcode_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Comcode_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Comcode_ completed. (executeStep() of com.sap.xi.tf._MM_Comcode_</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
</Top>
But still I'm not able resolve this issue kindly help.
Regards,
Santosh

Looks like there is some mapping problems ,may be the RFC connection is not properly configured .Here is the link to configure the connection between ECC and PI :
http://wiki.sdn.sap.com/wiki/display/XI/ConnectionSettingsbetweenECCandPIsystem
May be there is no value retrieved from the ECC system so it is saying null value.
For proper configuration check you can refer the following blog:
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
I am a beginner so not the full answer is there but may be this would help you.
Regards
Ravi Anand

BPM scenario issue

hi
We have scenario where Messages flow from TIBCO, gets converted into IDOCs in XI and rend it to other SAP system.
For some-reason all though messages were in XI but not processed completly, all most every message status set to 'Scheduled for Outbound processing' and few set to 'Transfer to Process Engine'.
Surprisingly these old messages (10 days) got processed y'day but only few of them NOT all.
Not able to understand what halped to get processed these messages yday?
why only few messages?
And who./where do i have check further?
Please help me, this is production issue.
Regards
Sekhar

Hi Sekhar,
Problem is with your Integration server.
It is Not able to release the object Previously held.
You have to restart your server (Dont Know if u can, as it is your production Server, Seviour problem)
Surprisingly these old messages (10 days) got processed y'day but only few of them NOT all.
Your server would have been able to release some object due to availibility of resources.
Reward points if helpful
Thanks
Sunuil Singh

PI7.1 File to Idoc scenario issue.

Hi,
We recently had an upgrade from PI7 to PI7.1.
When testing File to Idoc scenario ,we had an issue as below
Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">Error during lookup - com.sap.aii.mapping.lookup.LookupException: Error when calling an adapter by using the communication channel GeneratedReceiverChannel_RFC (Party: , Service: ED2_200, Object ID: a8f14398a9993dccadbe983d401f693a) The channel with object ID a8f14398a9993dccadbe983d401f693a could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache.</Trace>
<Trace level="1" type="T">Error when parsing RFC Response - null</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
This was working fine before upggrade.
Any changes required to be done in scenario?
Pls let me know.
Thanks,
Srinivasa

do a CPA cache refresh
http://hostname:port/CPACache/refresh?mode=full
also check if the object is visible in tcode SXI_CACHE..
also refresh the SXI_CACHE

Proxy to file scenario issue

Hi,
I am trying to configure a Proxy to file scenario.
My sender service is ERP system and the my receiver is PI file system.
These are the steps I followed:
1. Created a sender business system for Web AS abap (my ERP system)
2. Created a receiver business system for third party (my PI system)
3. I created all the interface objects(datatype, message type, message interface etc) in Integration repository.
4. In the ERP system , I configured http connection of type h to PI system and also configured lcrsaprfc, sapsldapi connections of type t. I followed this blog: How do you activate ABAP Proxies?
5. I also configured the ERP system as local integration engine, by setting the role to application system in sxmb_adm (followed the above blog).
5. Now I generated proxy in sproxy transaction for the outbound interface.
6. Then I created the communication channel, receiver agreement, interface determination and receiver determination in Integration directory.
7. I created a abap program to call the execute_asynchronous method.
Now the issue is, when I execute my report, nothing happens. I can see the success xml message in sxmb_moni in ERP system. No message is seen on the PI's sxmb_moni. The file is not written either to ERP or PI systems.
Since I am new to PI, I am not sure where to begin with.
If anybody can help that would be great.
Thanks
MLS

Hi
Check the following
1. RFC connection between R/3 and PI
2. You said Business system of type third party (PI) is receiving it. Try Business system standalone Java. If PI system is already defined in Landscape as Integration server. It will not show any message output.
3. message is shown in sxmb_moni in your ERP that measn proxy is able to receive all objects and passed it from there.
4. Check in SMQ2 outbound queue of ERP as well as inbound queue for PI if message exist.
5. While configuring in ID you dont need a sender agreement. Did you created one.
Thanks
Gaurav

Proxy scenario issue

Folks,
This is a simple scenario:
soap > PI > Proxy (Sync)
now here is the deal, when pi receives the response from SAP, in the inbound message we are able to see only 1 row in the response.
now when a stand alone test is done @ sap , both from SPROXY and from the se37 we see many other rows as well.
Can some1 guide me on what steps/ line i need to be thinking in?
is this some cache related issue?

Hi Jovani,
Please check sxmb_moni in sap or ecc (not in pi) and see the message. Open the message and ask him to send that payload to his program. Also check whether they both are same or not. Please use this blog as reference:
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
He can put in debug mode and then can test end to end. So that when you send the data from xi it will stop at his debug point and from there can debug step by step till you see the response sending to xi.
Also debug the proxy using this stefans blog:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
---Satish

Investment Buy Scenario - Issues

Hi,
I am unable to run the scenario as described in the documentation:
1. Vendor C3000, Plant CFT1, no materials are displayed for the vendor.
The simulation cannot be selected.
I tried other vendors as well as other plants and no materials are
displayed.
Any guidance is greatly appreciated!

Hello,
I have the same problem. Have you found a solution for this issue?
Thank you,
Jens

Tab character missing in the end of the line in file2file scenario?

Hi,gurus:
Our scenario is file to file,and both transport protocols are FTP.
We are using content conversion both in sender and recevier side.
But when we test the scenario,we found the tab character('0x09') is missing if the tab character is in the end of a line.
Can you tell me how to keep these tab characters the same as sender file?
Thanks in advacne.
ps: in the content conversion,the parameter fieldSeparator and endSeparator are both '0x0A'.
Edited by: xinjiang li on Jul 31, 2009 10:53 AM

Hi,
The source data is as below:
H 0000140898 0 UCP31300 20090715 20090715 2 1 UCP31310
D 0000140898 00001
After the record '00001',thare are some tab parameter,but after send content conversion,the payload is below:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_3PL_SAP2PF_ST02_SENDER xmlns:ns="http://www.unicharm-china.com/3PL">
- <Recordset>
- <Line>
<Line>H 0000140898 0 UCP31300 20090715 20090715 2 1 UCP31310</Line>
</Line>
- <Line>
<Line>D 0000140898 00001</Line>
</Line>
</Recordset>
</ns:MT_3PL_SAP2PF_ST02_SENDER>
The tab parameters are missing.
Our sender content conversion is below:
Line.endSeparator:'0x0a';
Line.fieldSeparator:'0x0a';
Line.fieldNames:Line
Any ideas?

FILE2FILE scenario issue

Similar Messages

Maybe you are looking for