File2File scenario using BPM

Hi friends,
I am getting the following error while creating in the first receiver determination between file 2 IP
1.)under configuration overview, the communication component is correctly showing but under this it is showing wrongly the outbound message  interface instead of the abstract interface .
2.)In the second receiver determination between IP 2 File also, under communication component, the inbound message interface is showing wrongly as abstarct interface instead of the inbound interface.
  Please help me to correct this problem.
Regards,
Srinivas

Srinivas,
Checkout your Interface determination. Most likely you have maintained incorrect Inbound interface.
Thanks,
Nilesh

Similar Messages

  • File to SOAP Scenario Using BPM

    Hi,
    I am doing File to SOAP scenario using BPM.
    while doing Integration Process in IR, i got the following error message
    "Expression of simple type xsd:string expected"
    But i have given xsd:string in the correlation element as well as in Data types.
    I dont know why it is getting the error.
    could you anyone please help me to sort out?
    Regards,
    Sai Ch.

    Hey,
    Check in the correlation editor, where you define the condition.
    Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
    regards,
       Milan

  • File to RFC scenario using BPM : a synchronous one

    Hi All
    I am doing File>RFC>File scenario using BPM with help of the blog
    RFC Scenario using BPM --Starter Kit
    here everything is explained but i am getting error while the processing of BPM part
    Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
    interface names
    filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
    (abstract means its an abstract interface)
    i have configuered the Integration process as follows
    Start>Recieve>synch_send>send>end
    step :  Recieve
    mode : asynch
    message:Filetoabstract_MI
    step :  synch_send
    mode : synch
    synch interface : synch_send
    req message:Filetoabstract_MI
    res message : RFCtoabstract_MI
    step :  send
    mode : asynch
    message:RFCtoabstract_MI
    and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
    error is there
    1) Integration process ---> file
    2) Integration process-->R/3 system

    Hi,
    Configure the Integration Engine According to this Blog and Trigger the Process again
    Configuration of a Central Integration Server
    Regards
    Seshagiri

  • File to IDOC Scenario using BPM

    Hi Experts,
        I am working on file-Bapi-Idoc scenario using BPM.
        I have two conditions
    1. If the Sonumber is populated then need trigger an Bapi_change
    2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
    and the response of these BAPIs should be validated whether the Bapi is successful or not.
    If it is successful message then need to trigger IDOC or else should throw an alert message.
    let me know the steps involved in this scenario.
    can i send alert message to other email IDs or can i send it to only XI admin?
    Please let me know u r inputs.
    Thanks in advance
    Praveen

    Hey,
    You need to have a BPM for this.
    BPM design.
    Recieve step(abstract asynchronous) for file structure
    Switch Case(condition whether sonumber is populated or not) 
    if populated
    Branch 1(of switch)
        transforamtion step:- mapping between File and Bapi_Change(Request structure)
      Send step(abstract syncronous) To send the BAPI_change
    Branch 2(of switch)
    transformation step:-mapping between file and BApi_Create
    Send step(abstract synchronous) To send the BAPI_Create
    Block step(which will include the Switch step)
        trigger an Execption in case of an error(in any of the two branches) through the block
        The Exception will trigger an alert.
    Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
    Next is the send step(abstract asynchronous) for the idoc
    In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
    rewards points if useful
    regards,
          Milan

  • Integrtion Scenario using BPM with two sender and multiple receiver

    integrtion Scenario using BPM with two sender and multiple receiver
    How many Application Components are required?

    Hi Vinod,
    1) In integration repository you can have one or many software components it depends on your landscape orchestration
    2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
    also each connection between systems and bpm must have receiver determination and so on.
    Advice: Please treat BPM as a separate system.
    best,
    Wojciech

  • Could any one provide me with the links of file to file scenario using BPM

    Could any one provide me with the links of file to file scenario using BPM

    Hi,
    omit RFC part
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

    I follow this blog to the letter - because it is the same as my scenario:
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
    Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

    Hi Lynn!!
    Check this SAP help for certain requirements when to use BPM:
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
    Take a look at this blog by Michal,
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
    Check this weblog for a step by step procedure:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    or case study go thru this blog:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    for checklist:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
    /people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
    Thanks !!
    Pls reward if useful

  • RFC Scenario using BPM

    I did whatever mentioned in that blog(/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit). Also I do have some experience in BPM.
    After testing I don't see the file inthe outbound directory. So I started analysing from all sides.
    1. First checked the message in my sxi_monitor, it black and white flag showed that the message processed successfully.
    2. I opened the message and saw the message from CENTRAL Client passed to PE ADAPTER Client with tooltip showing "Transfer to Process engine".
    1. First I checked whether my BPM is correct by pressing F7. There is no syntax error.
    2. I checked in sx_cache, the ReturnCode was 0.
    3. In smq2 I saw a message stuck in the PE queue. I double clicked the queue and saw the status text as "Permanent error in BPE inbound processing".  So I kept debugging by pressing F8 and after that the message got disappeared.
    4. I opened the message in sxi_monitor, and after the CENTRAL Client the message passed to PE ADAPTER, which measn the meesage has got transferred to process engine. But i'm not seeing any change in the file.
    5. Also what I      did was use transaction SXMB_MONI and chose process radio button and execute. Located my message but there is no task value which starts with 'WS..' in Process def column.
    Can you please pinpoint where i went wrong and anything else?
    One more thing, everytime i test the new file the file goes and gets stuck in the queue and I have got to follow the item 3 mentioned above.
    Thanks,

    Hi Kishore,  The second block is a synchronous send block in the BPM triggers the call to RFC.  I've done it as per the blog.  There is no transformation step in the BPM.  Anyway I fixed the issue. In the receive block whatever container value I used should be used in the send block also. Earlier I was getting some warning. Now my BPM is clean and it worked.
    Lesson learnt: Ensure there is no warning in the BPM. Thanks again Kishore.
    Thanks,
    Edited by: XISearch on Apr 29, 2011 5:20 AM
    Edited by: XISearch on Apr 29, 2011 5:24 AM
    Edited by: XISearch on Apr 29, 2011 5:24 AM
    Edited by: XISearch on Apr 29, 2011 5:25 AM

  • Problem in Idoc to JDBC scenario(uses BPM)

    Hi
    I have a IDoc to JDBC scenario which also uses BPM.
    The JDBC adapter has to execute a Stored procedure on Sybase database.
    I work on XI3.0 SP14.
    When I am sending IDoc to XI it is failing in CALL adapter step.
    The error message is "Unable to convert sender service TruckLiftAccountUpdate to an ALE logical system".
    However this scenario is working in Production with same settings.But it is not working in Quality and it is giving the above error.
    Can any one help me in this.
    Thanks in advance.
    KP

    Thanks for your quick reply..
    All the settings are in place.
    Here the Idoc is coming to BPM and BPM cant able to execute the stored procedure.and we are getting the error from BPM to target system.
    Here error is unable to convert the sender service(from BPM service) to ALE
    logical system.
    same settings are there in Production but it is not working in QA.
    Thanks in adavnce,
    KP

  • File to file scenario using BPM

    Hi,
    Did you check in RWB--Communication channel monitoring or SXMB_MONI for the reason?
    Thanks!

    Hi,
    The problem is when i insert the xml file in the sender directory I don receive the output file.
    1) while checking the CC please check whether your file is being picked-up from the sender directory.
    2) Is your file format the one that you have given in the sender CC? (XYZ.xml, XYZ.txt....)
    3) See if the return code of your BPM is 0.....login to SAP GUI --> go to transaction SXI_CACHE -->select Integration Process and see for your BPM....if it is not 0 then use the Repeat Activation option (available above the BPM list).
    I also want to kno why do we need to use BPM?
    If you are talking about the use of BPM in this aprticular blog, then please note that this scenario can be done without a BPM also....BPM is used just to show the basic functinality.....
    How to decide whether your scenario requires a BPM depends on the requirements...refer this checklist for more info:
    http://help.sap.com/saphelp_nw70/helpdata/EN/1c/287842f9e03654e10000000a155106/frameset.htm
    Regards,
    Abhishek.

  • Help SOAP to RFC Scenario using BPM (Synchronous communication)

    Hi,
    I am doing a scenario from SOAP to RFC scenario(Synchronous communication).  Here I am creating a PM Notification in the SAP system through a webservice. 
    I am using three BAPI'S here,
    1. BAPI_ALM_NOTIF_CREATE 
    2. BAPI_ALM_NOTIF_SAVE
    3. BAPI_TRANSACTION_COMMIT
    I am successful in calling the first BAPI from the Web Service.  For this I have not used BPM.  But to commit the transaction(PM notification in this case), I have to execute the other two BAPI's as well.  I have to pass the output of first BAPI to the second BAPI and then execute the 2nd BAPI.  And finally have to execute the 3rd BAPI.     FYI, 3rd BAPI is not dependent on any output.  It has to be executed independently after execution of the first two BAPI's.
    How can I execute this scenario?  Do I have  to use BPM?  If yes please let me know the steps in detail.  I have not done any BPM scenario till now.  So please answer me in detail.
    Thanks in Advance,
    Vijay
    p.s. reward points are must

    Hi Vijay,
    Yes, You will indeed need a BPM in this case...
    Based on my understanding of the Scenario u have explained, here are the steps that would be needed.
    1. Receive With the Sync-Async Bridge open.
    2. Transformation Step (Between the source Request and The BAPI_ALM_NOTIF_CREATE Request)
    3. Send Synchronous
    4. Fork
    5. In one Branch of the fork - Transformation (Between the BAPI_ALM_NOTIF_CREATE Response and API_ALM_NOTIF_SAVE Request)
    6. In the other branch of the fork - Transformation (Between a Dummy Source and the BAPI_TRANSACTION_COMMIT Request)
    7. Send Synchronous (to make the 2nd BAPI Call)
    6. Transformation ( BAPI_ALM_NOTIF_SAVE Response and the source Response)
    7. Send Asynchronous (to make the 3rd BAPI call)
    8. Send the Source Response and close the Sync-Async Bridge.
    There might be alternative ways also of doing it...
    Also a better design would be to take care of the 2nd and the 3rd BAPI call within the code of the 1st RFC Function Module.
    Regards,
    Abhy Thomas

  • ASYNC to SYNC scenario using BPM.

    hi,
    i have a async to sync scenario. i have a File sender->PI(BPM)->ECC and the response from ECC->PI->SOAP.
    Here in PI, i am using BPM. The ECC side is a Synchronous BAPI. The response is sent to the SOAP receiver.
    in BPM, can someone tell me how many transformation steps do i need i.e mappings. and how many abstract interfaces, synchronous interfaces, outbound interfaces, inbound interfaces?
    also how many send,receive and transformation steps.
    and in the configuration part,
    how many receiver determinations, interface determinations do we need.
    rgds,
    mithun

    Hi,
    File sender->PI(BPM)->ECC and the response from ECC->PI->SOAP
    Service interfaces
    -> SI_OB for file (Request)
    ->SI_IB for Soap(ASy Response)
    ->SI_ABstract(ASy Request)
    ->SI_Abstract (Asy Response)
    ->Si_REq_RES_ABS(Syn)
    ->SI_ABS(ASY BAPI REQ)
    ->SI_ABS(ASY BAPI RES)
    mappings
    one for request mapping(file Req to BAPREQ) and one for response mapping(BAPI REs to RESponse mSg).
    operation mappings-2, one for Req MApping ANd One for Res ponse mapping.
    IP
    reciv->transformation(REq)->Send(SYN/ASYN)->transformation(RES)->Send
    ID:
    3 reciver deteminations
    one for file to IP
    IP to ECC and IP to SOAP
    3 interface determinations
    1 sender agrement
    2 reciver sgrements
        one for IP to ECC
    and IP to SOAPregards,
    ganesh

  • RFC Scenario using BPM -- Performance

    Greetings,
      I've implemented a File->XI->RFC->XI->File scenario.
    I use a BPM which transforms the lines of my inbound file into multiple sales orders & line items, then loops through them in a ForEach block to call an RFC and then output the RFC's return structure to a file.
      It takes about an hour for a thousand sales orders to go through & get created.
    That really doesn't sound so bad to me except for the fact that there is a good probability that I will occasionally be receiving files containing up to 10,000 sales orders.
      Could anyone with experience with this type of XI processing please suggest any performance enhancements that have provided results.
    Thanks,
      Doug -

    Hi Doug,
    For effectively using BPM, plz have a look at this checklist
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    An add on
    http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
    1 Mapping inside a BPM could affect performance. If u have transformation step in ur Integration Process, then try to perform this mapping outside BPM. It will greatly improve the performance if mapping is complex.
    2. Reduce Tracing - parameter: LOGGING in SXMB_ADM
    Have a look here
    SAP note 857530
    And monitoring all these is always required
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
    Regards,
    Prateek

  • Alerts-Idoc to File Scenario using BPM

    Dear all,
    At the sender side,I am sending 2 Idoc's orders03,orders04 Idocs I am Merging in to single at my mapping level and sending to the respective receivers.
    When even some error occurs at system level or application level,an alert must be sent to the respective valid receipents.
    My question is,when creating the  Alert Rule how to use the interfaces(orders03,04) (here I have multiple senders).
    Is Alert rule required in BPM scenario's?if not let me know how alerts would be triggered for bpm scenarios.
    Thanks,
    Srini

    Hi,
    Let me see if I had you requirement correct.
    When the Idoc is sent from R3, sender partner type is LS and Receiver Partner Type is LI.
    If yes,
    1. Create a Party in ID.
    2. The Agency , Scheme and Identifier will have values,
    Agency --> Receiver Business System name or Business Service Name  to be used for File.
    Scheme --> ALE#LI
    Identiier --> Value of the RCVPRN field in the idoc control Record. Basically the Receiver Partner Name.
    All the Configuration In ID will use this Party as the Receiver Party and the corresponding Service asthe Receiver service.
    No need for a sender party as sender partner is LS.
    Regards
    Bhavesh

  • File to RFC Scenario using BPM

    Hi,
    Scenario:We have to post data 1 by 1 to SAP and also handle errors
    The file will be picked by the sender file adapter and given to bpm,bpm (uses message splitting) posts the data one by one to the sap r/3 system using receiver rfc adapter.
    errors could be due to connectivity..in this case we need to send alerts to users uing alert framework.
    good blogs or docs or ppt/pdf explaining a similar kind of scenario, will be highly helpful.
    thanks,
    younus

    hi
    for this u need the concept of ALERTs creation.
    U can use the following links to create alerts;
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
    XI ALerts with container elements - /people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/5e073c8e56f658e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2327---- [original link is broken] [original link is broken] [original link is broken]> [original link is broken] Trouble shoot alert config
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9c/34193cb4f5131de10000000a11405a/content.htm--SAP LIBRARY
    http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm -->Categories
    rewards points if helpful
    ragards
    sreeni

Maybe you are looking for