FILE2FILE with BPM

Hi All,
Now i am working on FILE2FILE scenario with BPM Asynchronous.
i created 4 message interfaces.
1.BPM_SENDER_MI
2.BPM_SENDER_MI_ABSTRACT
3.BPM_RECEIVER_MI
4.BPM_RECEIVER_MI_ABSTRACT
Message Mapping is
BPM_SENDER_MT2BPM_RECEIVER_MT
Interface Mapping is
BPM_SENDER_MI_ABSTRACT2BPM_RECEIVER_MI_ABSTRACT
My Integration Process:
Receove--->Transformation--->Send.
Now i got confusion in Integration Directory.
Please let me clear that,
how many comm channels required ?
And how many receiver determinations, interface determinations, sender agreements & receiver agreements required for me?
Anybody have the solution, Please get back to me ASAP.
I am very thankful to you in advance.
Regards,
Nagarjuna.

Hi Nagarjuna,
if inside your BPM you really have only ONE transformation, then I suggest to you do NOT use a BPM, because it's not necessary !
your performance will decrease with the BPM... (remind BPM=workflow).
Moreover if you have NOT a BPM, your config will be easier:
Sender --> Mapping --> Receiver
Note: and in SXI_MONITOR you will have ONE message line.
And in case of BPM, you have;
1. Sender --> (no mapping) --> BPM
2. BPM --> (no mapping) --> Receiver
Remind: the mapping is done in your BPM.
Note: and in SXI_MONITOR you will have TWO message lines.
So there is no good point use BPM if you just have one transformation into your BPM.
BPM has to be used when you want to impelement a workflow flow, with correlation, alert, merge, split, etc...
Hope this help.
Mickael
Edited by: Mickael Huchet on Apr 15, 2008 8:23 AM

Similar Messages

Error in file2file with bpm

iam trying to do file2file scenario with bpm
file is picking up from input and does not put in output.
adapters is working fine for this.
i got an error that "no object found for this message"
in sxi_cache return code is 99
in swf_customizing----
there is some error in like "error loading hr control data".
where it went wrong.plz provide solution.

Hi,
First do the Cache refresh and then try it once.
Go throgh the following links , it may solve your problem
BPE_ADAPTER error on async BPM
BPM (IP) Error: "No object type found for this message [...]"
No object type found for this message
Regards
Sridhar Goli

Problem in simple filetofile scenario with BPM

Hi
I am a starter to XI. I am implementing simple file2file scenario with BPMs.
But I am getting error while looking into SXMB_MONI.
Under "Monitor for Processed XML messages"
Number of XML message Found 3 (which is my input 3 xmls which is fine) but
"Status is RED Flag".
"Error Category: BPE_ADAPTER"
"Error ID: UNKNOWN_MESSAGE".
Please help me out with this problem.
Regards
Sam

Hi Raj,
When i click PE getting following error:
"Unable to perform action for selected message".
When i double click the row, it takes me to xml message versions where i can RED FLAG for "Call Adapter". In the trace i foudn the below at the end:
<trace level =1 type=system error> error exception return from pipeline processing"</trace>
Hope this helps to guide me mroe
sam

File 2 idoc with bpm

hi experts
can u send me the blogs of file 2 -doc with bpm (bpm collect pattern etc) and user defined functions in file 2 idoc

Hi,
User Defined Function are not generic,
It depends on what you are trying to do and the requirement,.
Please take a look at this link for some examples,
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards,
Bhavesh

File to idoc with BPM

Hi All,
I have one File to IDoc Scenario. Now I want to throw posting error in a file.
i.e., if mapping goes not well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a file(Flat file) will be created at sending system side.
I am planning to design this scenario with BPM. Now end user requires a akwoledgement for this scenario eithere it may be succsess or failure in file format. If succsess the file will be created with succsess information(any format), either failure also file will be created with error information. The user requires only file format b'coz this file will be read by another java application (user didn't require to his mail).
Can anybody suggest the solution for this:
1. How to generate aknowledgement file for sucsess or failure.
2. How to use this file to idoc scenario in BPM with out using Alert configuration or Mail adapter.
Regards,
Konala.

Hi,
As you know Idocs are used for asynch communication, only was to get acknowledgemnet is using ALEAUDIT. For your scenario there can be one work around. When you post IDoc in the, in that function module after the posting is done call one more RFC with the the success/failure message which will trigger RFC to File sceanrio.
If you get any other solution, please post it back to same thread.
Thanks,
Prateek

Problem in FILE to FILE scanariao with BPM

Hi all,
Please give me the advise regarding scanario File to File with BPM. When i was sending the message from source to target its not getting. The message can be taken from sorce file, but in recieving side i did't getting.
I checked both adpters, in send adapter get the message, but the reciaver adapter not getting message. Please give me solution any one.
Thanks & Regards
Gangi Reddy.P
SAIC_INDIA
Bangalore

hi,
check this doc:
https://websmp110.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
maybe it's stuck in the BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Proxy to SOAP Sync with BPM (1:N)

Hi
Proxy to SOAP Sync and return message will be posted back to R/3 via proxy. This is Async to Sync using BPM. And the split happens in BPM as well. We are suppose to go with BPM here, that's the mandatory step for learning purpose
I am trying to follow the steps below
1. OB Async MI Proxy outbound message into XI
2. ABS Async MI to receive the proxy message into BPM
3. ABS Sync MI SOAP Sync message
4.ABS Async MI for Proxy Inbound to R/3
5. BPM for Split
I am at the stage of writing spec, can't execute any of the steps and have no prior experience with this kind ofscenario. If anybody have experience, please do share exact steps. Thanks in advance

Hi,
Your steps are correct ... in the IP, the following steps will be there -
Rcv -> Transform -> Send (sync) -> Transform -> Send (async).
I am not too sure what you mean by step 5 - BPM for split ?
Regards,
Neetesh

XML file to Proxy Scenario with BPM - ID Steps

Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
San

ES Repository
                     *Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
              Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
              Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima.

PPEM P6 V8.3 integration with BPM 11g

Hi Everyone,
My requirement is to install and integrate oracle Primavera P6 8.3 with oracle Business Process management 11.1.1.6.0 on OEL 5.5.
My Environment:
EPPM Server      : OEL 5.5 32bit
Hostname          :primavera.xxxx.com
Weblogic server URL: http://primavera.xxxx.com:7001/console
BPM Server     : OEL 5.5 32bit
Hostname       : bpm.xxxx.com
Weblogic Server URL: http://bpm.xxxx.com:7001/console
We have installed the BPM 11.1.1.6.0 setup in a weblogic server and the respective weblogic server URL is (http://bpm.xxxx.com:7001/console) and its currently up & running.
In this web logic server we have created a domain with 2 managed server SOA and BAM. Please find the below details,
bam_server soa_server RUNNING OK 9001
soa_server soa_server RUNNING OK 8001
While running the "eppmconfig" in P6 environment in-order to configure with BPM process, We copied all the BPM library and connector files to the P6 EPPM server. According to the Oracle Document "connecting_bpm_11g_to_p6.pdf"
In the P6 EPPM Configuration wizard "BPM Configuration" tab its requesting for the below inputs.
bpm.user:          ?               => Please advise whether i have give new user name here for BPM admin, Initially i haven't created any user. (My guess : weblogic)
bpm.password: ?                   (My guess : Welcome123(pwd of weblogic user))
bpm.t3.url:        ?                => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001/soa-infra" OR "http://bpm.xxxx.com:9001/soa-infra" OR "http://bpm.xxxx.com:8001/soa-infra" )
                                                    (I am having URL : bpm.xxxx.com:8001/soa-infra)
bpm.security.realm:        => (jazn.com by default)
bpm.soap.url:   ?               => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001" OR "http://bpm.xxxx.com:9001" OR "http://bpm.xxxx.com:8001" )
bpm.workspace.url: ?     => Please advise me which url i have to give here ( "http://bpm.xxxx.com:7001" OR "http://bpm.xxxx.com:9001" OR "http://bpm.xxxx.com:8001" )
bpm.partition:   ?              => default
Please suggests me which input values, we have to give in the above mentioned variables,
Awaiting for the valuable suggestions.
Regards
Gunasekar

bpm.user and bpm.password could be weblogic and its password. In all the other URL use the port 8001. Save the changes and restart the P6 server and test.
Regards,
Sachin Gupta

Integration of OBIEE Dash Boards with BPM Process

Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.

Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

Value mapping with BPM

Hi Experts
How to do value mapping with BPM.
I tried searching for blogs in SDN but i didnt get any solution
Regards
Sowmya

Hi,
Your question is not very clear. Let me know how you want to use Value mapping?
You can implement value mapping in two ways..
1. Value Mapping Replecation Method, in which we create ABAP program (outbound proxy) in R3 which selects data from R3 tables and sends into XI, and which get stored in XI JAVA Cache untill you run the ABAP program next time which is very rare. This kind of method is best when you have large amount of R3 data.
2. If you have some data which is used just to varify the conditions at run time then in that case we go for Value Mapping creation in Integration Directiory. Below mentiond blog will give an idea how to use Value mapping in ID.
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
Value Mapping is used in Graphical Mapping which gives the value at run time only, so you cannot test it in TEST Tab of message mapping.
So as per you question, BPM can come into picture later on after you maintain the value mapping in ID and do the corresponding mapping in IR.
Regards,
Sarvesh

JDBC to RFC with BPM

Hi,
Please find details of my scenario.
Oracle(VIEW)
Sender JDBC--> PI--
> RFC request
and RFC response I need to update some other table in Oracle using storeprocedure.
and have one more storeprocesdure to update the View so that I will not get duplicate entry.
I am not using UPDATE statement in JDBC sender communication channel, insted of that to update VIEW I am using storeprocedure.
Please let me know how I can achive it with BPM.
Thanks,
Bhupesh

Hi,
1) If the structure send by JDBC is not acceptable by the BPM then you need one Mapping in JDBC ---> BPM flow.
2) If the structure send by JDBC is same as the receiving structure of BPM then no need of Mapping.
3) You will need one Mapping to map JDBC req message to the RFC req message; one mapping program to convert RFC response to the JDBC stored-procedure message....
So your scenario with mappings will be:
JDBC --> Interface Determination (Mapping Optional as per pt.1) -
> BPM
BPM <-> Interface Determination (Request-Response Mapping) <--> RFC
In the above mapping program your ABS MI of BPM should have below MTs
Req Message -
> Original Message Received from JDBC
Response Message ---> Message which needs to be send to the JDBC stored-procedure.
Now your IN SYNC MI at the RFC end should have below MTs
Req Message ---> RFC request message
Resp Message ---> RFC response massage.
Then in the Interface Detremination of BPM <----> RFC flow develop a IM with below mapping programs:
Request Mapping between ---> MessageFromJDBC_to_RFCRequest
ResponseMapping between ---> RFCResponse_to_JDBCStoredProcedure
BPM -
> JDBCStoredProcedure
For this flow there is no need of Mapping program...
using the above mappings programs you can ensure that there is no Transformation step in your BPM...this is to help you in achieving a good performance out of your BPM...
You need a Syns ABS and Sync IN message Interface for BPM <---> RFC communication.
Regards,
Abhishek.

SQL JOIN with BPM sql component

Hello friends.
How to use SQL JOIN with BPM sql component?
The tables objects are created but the joined tables belong to different sql components .
I tried something like that, but a error "table doesn't exist" occours.
Ex:
for each element in
SELECT imuImovelCd
FROM IMOVEIS_URBANOS,
Integracao.FGLP.IMOVEIS_PRE_EDITAIS
WHERE IMOVEIS_URBANOS.imuImovelCd = Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipeImuCd
AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedNr = 1
AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedAa = 2008
do
extend this.imoveis using cdImovel = element.imuimovelcd,
                              nrImovel = call(DEC_ENDERECO, codimovel : element.imuimovelcd, tipoimovel : 1)
end
Edited by: user9008295 on 26/01/2010 05:19

ok, ok you are right.
When I try use SQL Statement to make a JOIN with 2 tables on different sql objects, BPM returns "table dosn't exists".
So.... I change my code. I dont know if this is the best way to do, but... i hope u, or everyone, can help me to do a best work.
This code works fine.
for each element in
SELECT ipeImuCd
     FROM Integracao.FGLP.IMOVEIS_PRE_EDITAIS
     WHERE Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedNr = 1
     AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedAa = 2008
do
     for each element2 in
          SELECT imuImovelDv
          FROM IMOVEIS_URBANOS
          WHERE imuImovelCd = element.ipeImuCd
     do
          extend this.imoveis using cdDvImovel = String(element2.imuImovelDv),
                                        cdImovel = Decimal(element.ipeImuCd),
                                        endereco = call(DEC_ENDERECO, codimovel : element.ipeImuCd, tipoimovel : 1)
     end
end
Thx a lot!!!

Scenario's performance with BPM vs without BPM in PI 7

hello,
Please send me the presentation, blogs describing the performance issues in PI 7
also, the docs differenciating a normal scenario's performance (without BPM) vs the scenario with BPM...
What are the enhancements made to BPM in PI 7 for performance increase?
Regards,
Nikhil.
******Each useful reply will be awarded*******
Edited by: nikhil a on Feb 7, 2008 6:10 AM

BPM Performance: Integration processes are executed on the Integration Server at runtime by the Business Process Engine. Since the Integration Server is the central resource for message exchange, you must ensure that it is not overloaded; otherwise, this can lead to bottlenecks or performance problems.
Resource Consumption
Every step of an integration process uses Integration Server resources.
●      Every message that is sent to the Process Engine is duplicated.
●      Every message that is sent from the Process Engine is duplicated.
●      A work item is created for the process itself and for every step the process contains.
This means that for a process that just receives one message that is sent without being processed further, four messages and three work items are created.
For this reason, you must ensure that you take Integration Server resources into account when you define integration processes.
Resource Consumption of Different Step Types and Transactional Behavior
Different step types consume different amounts of system resources:
●      Step types with high resource consumption:
     ○       Receive step
     ○       Send step
Asynchronous send steps with acknowledgments in particular consume a lot of system resources. In the case of synchronous send steps, consumption depends on the target system.
     ○       Receiver determination
     ○       Transformation step
In transformation steps, resource consumption is dependent on the mapping called. In general, process steps that generate work items internally are relevant for process performance. Transformation steps (either for message split or merge) also include a mapping step and can be quite expensive. This should be taken into consideration during scenario design.
     ○       Block
     ○       Wait step
●      Step types with low resource consumption:
     ○       Control step
     ○       Multiple condition
     ○       Fork
     ○       Loop
     ○       Undefined step
If you design the transactional behavior of an integration process so that the following steps are not performed as separate transactions, you can improve performance significantly:
●      Transformation step
●      Receiver determination
●      Send step (synchronous or asynchronous)
Transactional Behavior of an Integration Process
Use
You can now influence transactional behavior in the definition of an integration process in the process editor. This enables you to improve performance.
Transaction:
A transaction is a sequence of processing steps that are either fully executed, or not executed at all. If the system cannot fully execute a transaction, it rolls back all processing steps within the transaction. This means that the system can return to the state before the transaction was begun.
The transaction control mechanism for integration processes is not a central transaction manager for an entire system landscape. The transaction control mechanism cannot roll back any processing steps outside the Integration Server.
Transaction Boundaries
You have the option of defining the start or end of a block as the boundary of a transaction.
●      In the case of the start of a block, you can define that the system is to start a new transaction.
●      In the case of the end of a block, you can define that the system is to end the transaction being started (COMMIT WORK). The system ends the transaction that is currently open, regardless of whether it has been started or not. For example, if no new transaction was started at the start of the block, the last transaction started is continued instead.
By making appropriate settings for the start and end of a block you can expand transactions. This means that the database needs to be accessed less often, and enables you to improve system performance
Transactional Behavior for Specific Step Types
At runtime, the system normally creates a separate transaction for each step. The transaction then covers this step only. However, you can influence the transactional behavior of particular step types. In the step properties, you can define that the system is not to start a new transaction when the step is executed. The system then executes the step in the transaction that was started at the time of execution. Consequently, no background work item is created for the step and the database does not need to be accessed. In this way you can improve system performance.
You can influence the transactional behavior of the following step types:
●      Send step
You can influence the transactional behavior when sending messages both synchronously and asynchronously, and when sending acknowledgments
     Transformation Step
     Receiver Determination Step
Optimizing Transactional Behavior:
●      Memory requirements
Expanding transactions and executing specific steps without creating a new transaction may increase the burden on the main memory. If the burden on the main memory is too great, you must redefine transactions, or define that a new transaction is to be created for the step concerned.
●      Troubleshooting in the workflow log
The technical view of the workflow log does not show any detailed information for steps for which no work item was created. If an error occurs, the workflow log displays the error information for the last executed step. The following example illustrates this:
A process contains a transformation step that is executed within an expanded transaction. When the transformation step is executed, an error occurs in mapping and the system rolls back the transaction. Since no work item was created for the transformation step, the workflow log does not have an entry for the transformation step. The error information is entered in the last executed step in the workflow log.
EXAMPLE:
For an example of resource consumption, see the BPM scenario described in the XI sizing guide:
The inbound SOAP messages are handed over to the BPE, which triggers a two-step process consisting of message reception and sending. The processed messages are then sent to a receiver by using the SOAP channel; no mapping.
The SAPS value for this scenario, in which 10 kB messages are processed, is 1300 (processing one process instance each second). A simple XI proxy scenario, for example, requires 140 SAPS process-ing one message each second. This gives you an idea of the resource requirements using BPM.
Example:
In the original implementation, two separate JCBC calls were made to retrieve a sales order document header and the line items. This data then was transformed to the IDoc format of the receiving application using a transformation. Then, using a loop step, one IDoc at a time was sent to the backend application. - This sub optimal design resulted in poor performance caused by following design flaws:
                Separate retrieval of header and line items with the JDBC adapter
               Transformation within ccBPM to combine retrieved header and line items
               IDoc back end connection for one document at the time
In the improved version below, both the JDBC call and the transformation were removed from the ccBPM. The retrieval of the source messages is done via a synchronous call with two mappings in the integration engine of XI that generate the required format for the receiving system. Therefore, it is not necessary to add an additional transformation step in the ccBPM. Additionally, the IDoc adapter connecting to the target system is used to handle multiple IDocs inside one XI message. Therefore, it is not necessary to add a loop operation within the ccBPM either. In this particular implementation, the described changes resulted in a 20x performance improvement!
IMP LINKS:
3bf550d4-0201-0010-b2ae-8569d193124e.pdf
43e8e190-0201-0010-3ea1-d6f996cb4124.pdf
70ada5ef-0201-0010-1f8b-c935e444b0ad.pdf
c071d7bb-0601-0010-d6b8-f4e4dc7f1e20.pdf

FILE2FILE with BPM

Similar Messages

Maybe you are looking for