[FileAdapter] Reading meta data

Hey,
is it possible to read system meta data of a file that should be read?
I would like to know the date/time the file was created on the file system.
thanks
chris

>
Prateek Raj Srivastava wrote:
This application can run as OS command before message processing at file sender
Hey,
thanks for your reply. So the OS command is triggered by the file adapter???
thanks
chris

Similar Messages

PPro CS3 fails to read Meta data

PPro CS3 fails to read Meta data in some files i have imported. It fails to read the start of the timecode and the tape name:
Files imported into PPro CS3: http://web.comhem.se/averdahl/pproCS3_meta.png
The same files imported into PPro 1.5: http://web.comhem.se/averdahl/ppro15_meta.png
The first two clips are captured in PPro 2.0, may 2006, and the rest is captured in PPro CS3, august 2007. I have then used the Split function in Scenalyzer Live to split the captured material into smaller clips. I added the Tape Name in Scenayzer Live.
The Meta data, timecode and tape name, can be read in Scenalyzer Live, Adobe Bridge 2.10.100 and PPro 1.5 but PPro CS3 refuses to read some of it. I have not PPro 2.0 installed right now but will give it a shot later. I have deleted Media Cache Database and reimported the clips in CS3 to no avail. I can create a new Project and import the files with the same reults, some meta data is skipped, so the Project itself is ok.
Do you know why this happens? Does it happen to anyone else? Do anyone have a solution?
/Roger

Make sure that the file has a .html or another known file extension to make sure that the server recognizes it as an HTML file.
The server may send unknown files automatically as text plain.

Algorithm to read pdf meta data

Hi,
I want to know how can i read pdf meta data. Like number of pages and each page height and width. Note i want to for older pdf files which are created by 1.5 pdf creator.
I know using pdf 1.7 version we can communicate two way. Abou we know that pdf files has a meta data and in that meta data there will some text values for pdf creator version, page count author etc.
I want this by using action script so that i can access it in flex for web application.
Thanks
Thulasiram.Seelamsetty

You could try AlivePDF
www.flexmycode.com

Read Dictionary Meta Data with a Single Server Connection

Hello,
I've Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview from https://www.sdn.sap.com/sdn/downloads.sdn running on my computer and implemented the Tutorial: "Creating A Web Dynpro Application Accessing ABAP Functions" from https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD4_AccessingABAP.htm.
During the setup of the JCo Conneciton for the WD_FLIGHTLIST_RFC_METADATA_DEST in the Web Dynpro Content Administrator in Step 3 I came across the problem that I can not use a Single Server Connection to read Dictionary Meta data.
So my Question: Why is it not possible to read Dictionary Meta Data with a Single Server Connection?
Regards
Gregor

Hi Ruth,
Thanks for the guideline.
I entered an entry in the etc/service file on the m/c which is having SAP WAS 6.40 J2ee installed.(let say ip address 172.16.1.38)
for e.g.
sapmsSA1 3600/tcp
I restated the webAS server.
Then from SAP GUI when i am connecting to SAP R/3 backend system and checking the 'smlg' transaction.....i can see 3 Logon groups with the same name 'PUBLIC'.
Now i have created the BC Message server connection in SLD with this information.
caption - SA1 01
Message server IP = 172.16.1.242
port 3600
After that i specified this message server information to WD_MetaData connection in JCO content administrator.
When i tetsed this connection it gives me error as follow.
com.sap.mw.jco.JCO$Exception:(102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
connect_PM TYPE=B MSHOST=172.16.1.242 GROUP=PUBLIC R3NAME = SA1 MSSERV=sapmsSA1 PCS=1 LOCATION CPIC(TCP/IP)on localhost with Unicode ERROR partner not reached(host 172.16.1.38,service sapgwoo)
connection refused
can u guide me what i am missing?
Thanks,
Mital.

Can not get PK-FK in meta-Data of MySql....Help me pls.

Hello Every one.
I can not to get the PK and FK from Meta-Data Database of mysql-4.1.1a-alpha. Anyway I tried to do the
followihg
1. OS windows 2000 Pro.
2. set configuration Script support InnoDB Table Type as the follow in my.ini file.
[mysqld-nt]
innodb_data_home_dir = C:\mysql\data
innodb_data_file_path =\ibdata\ibdata1:2000M // in folder \data\ i was created folder ibdata
3. I try to create data as reference in example java code and table :persons , shirt as the example in
Create innodb table Type of mysql doc.
4. the code test as following
In the test code i can get the result only from method : getPrimarykey(...); only and the other method ,getExportedKeys, getImportedKey , getCrossReference the result in ResultSet is null.
anyway, this code i can apply in the oracle db with change db driver .
I wish the answer why? and the actually the second parameter of this parameter , as refer scheme name , the scheme name is ?
Thank you
import java.sql.*;
public class testMeta {
public testMeta() {
ResultSet rs=null;
String url = "jdbc:mysql://localhost:3306/testinnodb";
Connection con = null;
try{
Class.forName("org.gjt.mm.mysql.Driver");
}catch(ClassNotFoundException ex){
System.out.println(ex.getMessage());
try{
con = DriverManager.getConnection(url,"root","rootpwd");
prtS("getConnection complete");
DatabaseMetaData metaData = con.getMetaData();
Connection con2 = metaData.getConnection();
String type[] = new String[1];
type[0] = new String();
prtS("*************** GET Schemas ***************");
rs = metaData.getSchemas();
               while(rs.next()){
System.out.println("12345");
prtS("TABLE_CAT" + " : " + rs.getString(0));
prtS("TABLE_CAT" + " : " + rs.getString("TABLE_SCHEM "));
               rs=null;
prtS("*************** GET PRIMARY KEYS ***************");
rs = metaData.getPrimaryKeys(con.getCatalog(),null,"persons");
while(rs.next()){
prtS("TABLE_CAT" + " : " + rs.getString("TABLE_CAT"));
prtS("TABLE_SCHEM" + " : " + rs.getString("TABLE_SCHEM"));
prtS("TABLE_NAME" + " : " + rs.getString("TABLE_NAME"));
prtS("COLUMN_NAME" + " : " + rs.getString("COLUMN_NAME"));
prtS("KEY_SEQ" + " : " + rs.getString("KEY_SEQ"));
prtS("PK_NAME" + " : " + rs.getString("PK_NAME"));
               rs=null;
prtS("*************** GET Exported KEYS ***************");
rs = metaData.getExportedKeys(con.getCatalog(),null,"shirt");
while(rs.next()){
prtS("FKCOLUMN_NAME" + " : " + rs.getString("FKCOLUMN_NAME"));
               rs=null;
prtS("*************** GET Imported KEYS ***************");
rs = metaData.getImportedKeys(con.getCatalog(),null,"persons");
while(rs.next()){
prtS("PKTABLE_CAT" + " : " + rs.getString("PKTABLE_CAT"));
rs=null;
prtS("*************** GET CrossReference ***************");
rs = metaData.getCrossReference(con.getCatalog(),null,"persons",con.getCatalog(),null,"shirts");
while(rs.next()){
prtS("PKTABLE_CAT" + " : " + rs.getString("PKTABLE_CAT"));
}catch(SQLException ex){
prtS(ex.getMessage());

How i know the jdbc driver not compatible to this
mechanismBy reading the documentation tthat comes with your driver. Recent versions of the MySQL JDBC driver do support the getExportedKeys/ImportegKeys methods but the table needs to be crated as InnoDB.
So run the SQL command
show table statusWhats under the Type column for your table? If it isn't InnoDB then this isn't going to work.
If it is InnoDB but getExportedKeys/ImportegKeys still don't work then you haven't used the "foreign key" constraint in your "create table" command

Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
The meta data for each image is missing.
I have over 2,000 images. I don't want to go back through each image and add meta data.
Is there some way to move everything?

No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

Dynamically how to get the meta data of an ui element which is custom one

Hi All ,
In SRM , I want to know the meta data declarations of an UI element in my webdynpro component ..How to know this ..Can anyone help me in this ..I want to know the meta data of an ui element .
Sandeep

You really aren't supposed to read the properties of active UI elements directly. Instead they should be bound to context attributes and then you read these attributes via normal context APIs. If you absolutely needed such access because this is a standard SAP WD, then consider that the WDDOMODIFYVIEW is the only part of th event loop where you are allowed access to the View and its UI elements.

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

How to read a data from USB port using JAVA

hi all,
i need to know how to read a data from USB port using java. any API are available for java ?.........please give your valuable ideas !!!!!!!!!
Advance Thanks!!

You can do this. Please use this link
[http://www.google.co.in/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=uHu&q=java+read+data+from+usb+port&btnG=Search&meta=&aq=f&oq=]
What research did you do of your own? Have you done some testing application and tried yourself??

Images (w/correct meta data) are in catalog and on disk, but LR 5.7 considers them new on Import

For reasons explained below, I want to try to re-import all my images into LR and hope that none/few are in fact considered new and are imported. Yet, for some folders, LR is apparently unable to detect that my source images are already in the catalog, and are on disk, and that the source file meta data matches what LR knows about the images. When I click an image in LR and Show in Finder, I do see the imported image on disk. I can edit the image in the Develop module. So, it seems good, but all is not well.   Sorry for the long post here, but I wanted to provide as much info as I could, as I am really seeking your help, which I'd very much appreciate.
Here are some screen shots that illustrate the problem:
Finder contents of the original images
LR folder hierarchy
an image as seen in LR
Finder content of external LR copy of images
import showing 10 "new" photos
The original images ... (I'm not sure why the file date is April 2001 but the actual image date is January 2011; I may have just used the wrong date on the folder name?)
The LR folder hierarchy ...
An image as seen in LR ...
The external folder containing the images in the LR library
But on import of the original source folder, LR sees 10 "new" photos ...
I tried "Synchronize Folder ..." on this particular folder, and it simply hangs half-way through as seen in the screen shot below.   IS THIS AN LR BUG?   This is really odd, since "Synchronize Folder ..." on the top-level folder completes quickly.
I have a spreadsheet of of the EXIF data for the original files and those created by LR. (I extracted this info using the excellent and free pyExifToolGui graphical frontend for the command line tool ExifTool by Phil Harvey.)   Almost all of the Exif data is the same, but LR has added some additional info to the files after import, including (of course) keywords. However, I would not have expected the differences I found to enter into the duplicate detection scheme. (I didn't see a way to attach the spreadsheet to this posting as it's not an "image".)
I'm running LR 5.7 on a 27" iMac with Yosemite 10.10.2, having used LR since LR2. I have all my original images (.JPEGs and RAWs of various flavors) on my internal drive on the Mac.   To me this is like saving all my memory cards and never re-using them.   Fortunately, these files are backed up several ways.   I import these images (copying RAWs as DNG) into LR with a renaming scheme that includes the import number, original file creation date and original file name.   There should be one LR folder for each original source file folder, with the identical folder name (usually a place and date). I store the LR catalog and imported images on an external drive. Amazingly and unfortunately my external drive failed as did it's twin, same make/size drive that I used as a backup with Carbon Copy Cloner.   I used Data Rescue 4 to recover to a new disk what I thought was almost all of the files on the external drive.
So, I thought all would be well, but, when I tried "Synchronize Folder" using the top-level folder of my catalog, the dialog box appeared saying there were over 1000 "New" photos that had not been imported. This made be suspicious that I had failed to recover everything.   But actually things are much worse than I thought..   I have these counts of images:
80,0061 files in 217 folders for my original source files (some of these may be (temporary?) copies that I actually don't want to import into LR)
51,780 files in 187 folders on my external drive containing the LR photo library
49,254 images in the top-level folder in the LR catalog (why different from the external file count?)
35,332 images found during import of the top-level folder containing original images
22,560 images found as "new" by LR during import
1,074 "new" images reported by Synchronize Folder ... on the top-level folder in the catalog; different from import count
Clearly things are badly out of sync.   I'd like to be sure I have all my images in LR, but none duplicated.   Thus, I want to try to import the entire library and have LR tell me which photos are new. I have over 200 folders in LR. I am now proceeding to try importing each folder, one at a time, to try to reconcile the differences and import the truly missing images. This will be painful. And it may not be enough to fully resolve the above discrepancies.
Does anyone have any ideas or suggestions? I'd really appreciate your help!
Ken

Thanks for being on the case, dj!   As you'll see below, YOU WERE RIGHT!      But I am confused.
    1. Does the same problem exist if you try to import (not synchronize) from that folder? In other words, does import improperly think these are not duplic
YES. Import improperly thinks they are NOT duplicates, but they are in fact the same image (but apparently not the EXACT SAME bytes on disk!)
    2. According to the documentation, a photo is considered a duplicate "if it has the same, original filename; the same Exif capture date and time; and the same file size."
This is my understanding too.
    3. Can you manually confirm that, for an example photo, that by examining the photo in Lightroom and the photo you are trying to synchronize/import, that these three items are identical?
NO, I CAN'T! The ORIGINAL file name (in the source folder) is the SAME as it was when I first imported that folder. That name is used as part of the renaming process using a custom template. However, the file SIZES are different.    Here is the Finder Get Info for both files. Initially, they appeared to be the same SIZE, 253KB, looking at the summary. But, if you look at the exact byte count, however, the file sizes are DIFFERENT: 252,632 for the original file and 2252,883 for the already-imported file:
This difference alone is enough to indicate why LR does not consider the file a duplicate.
Furthermore, there IS one small difference in the EXIF data regarding dates ... the DateTimeOriginal:
                                                                                               CreateDate              DateTimeDigitized                    DateTimeOriginal              FileModifyDate                              ModifyDate
ORIGINAL name: P5110178.JPG                                     2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:01:17 11:29:00        2011:01:17 11:29:00-07:00       2005:04:24 14:41:05
After LR rename: KRJ_0002_010511_P5110178.JPG    2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:05:11 15:27:18        2011:01:17 11:29:02-07:00       2005:04:24 14:41:05
So ... now I see TWO reasons why LR doesn't consider these duplicates.   Though the file NAME is the same (as original), the file sizes ARE slightly different. The EXIF "DateTimeOriginal" is DIFFERENT.   Therefore, LR considers them NOT duplicates.
     4a. With regards to the screen captures of your images and operating system folder, I do not see that the filename is the same; I see the file names are different. Is that because you renamed the photos in Lightroom (either during import or afterwards)?
I renamed the file on import using a custom template ...
        4b. Can you show a screen capture of this image that shows the original file name in the Lightroom metadata panel (it appears when the dropdown is set to EXIF and IPTC)?
SO ....
The METADATA shown by LR does NOT include the ORIGINAL file name (but I think I have seen it displayed for other files?). The File SIZE in the LR metadata panel (246.96 KB) is different from what Finder reports (254 KB). There are three "date" fields in the LR metadata, and five that I've extracted from the EXIF data.   I'm not sure which EXIF date corresponds to the "Data Time" shown in the LR metadata.
I don't understand how these differences arose.   I did not touch the original file outside LR.   LR is the only program that touches the file it has copied to my external drive during import. (though it was RECOVERED from a failed disk by Data Rescue 4),
NOW ...
I understand WHY LR considers the files different (but not how they came to be so). The question now is WHAT DO I DO ABOUT IT?   Is there any tool I can use to adjust the original (or imported) file's SIZE and EXIF data to match the file LR has? Any way to override or change how LR does duplicate detection?
Thanks so very much, dj.   Any ideas on how to get LR to ignore these (minor) differences would be hugely helpful.

Feature Request: Better dimensional meta data displayed

Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
thks
andy

Thanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
Cheers,
Arno.
Bridge Engineering Manager, Adobe.

Can No Longer Edit Song Meta Data In Latest iTunes 11.1???

I just discovered that since the update to version 11.1 I can no longer manually edit the meta data by using the Show info function, all options are greyed out. For instance I can no longer adjust the volume level on a song nor can I edit the fields for song title and artist tec. There is also no longer any tab for album art when using the Show Info function on a song that has no album cover art. On songs that already have an album cover there will be an album art tab but the options there are all greyed out so I can not change the album cover art if I wanted too. This really *****, I can no longer edit album cover art for songs that have another cover already and I can not add any cover picture at all for songs that have no cover art (unless I manage to get the cover from the iTunes store but that is very often not successfull).
Another bug I found is that I can no longer add any video file to my playlists.
So this new update really ***** for me and have ruined my itunes experience.
Do anyone else in here have the same problem?
I really hope Apple will fix these bugs as soon as possible!

I think I finally found a solution to this problem. It appears that for some reason, some songs you download will maintain write protection that the original owner had set on his/hers computer. In my case for this Ellie Goulding album that I had problem with, it turned out my friend who gave it to me had some of the songs stored on his iPad and that caused the files to become write protected it seems, and this write protection was transfered over to my PC. To solve this issue, everytime you encounter a song in iTunes that you can not edit just right click it and select Show/View In Explorer, that will take you to the storage location of the file in question. Now right click the song and select Properties and see if it is write protected, if it is then just uncheck that option and click ok. Now you should be able to edit the meta data for that song again. So it appears this is not a bug in iTunes but rather a write protection issue.

OBIEE 11g Map Visualization Error - basemap is defined in spatial meta-data

Hi All,
I have installed OBIEE 11g successfully on my Desktop Machine, deployed the Sample Applications regarding Mapviewer and its working fine. I have seen all the Maps and they are running fine in fact they are editable and i can easily do anything with those Maps but,
The issue is that when i am going to create a new Report and try to integrate Map on it then it shows an error as display below;
A basemap is required to render a map. Please ensure that atleast one basemap is defined in the spatial meta-data
Error Details
Error Codes: EMGUNIA3
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool,
saw.threadpool, saw.threads
I have also followed this link ( http://erpthings.blogspot.com/2011/01/obiee-11g-inbuilt-mapping-and-spatial.html ) but it is also stuck on the same error at the end.
I didn't understand the problem why its giving an error like this while the Sample Application worked fine so, if there is any way to define a basemap in spatial meta-data plz guide me OR
Is there any way to integrate Map with OBIEE 11g ?
Cheers,
Masood.

This question has been solved!
Basically you need to ensure the database schema where the data source (Navteq) has been imported must have the privilege "Create Type"
This comes from the Oracle manual extract as shown below:
1.4.4.3 Creating MapViewer Array Types, if Necessary
For each database schema that it connects to, MapViewer checks for the existence of
the following SQL array types that support array-type binding variables that might
exist in some predefined themes:
■ MV_STRINGLIST
■ MV_NUMBERLIST
■ MV_DATELIST
If these types do not exist, MapViewer attempts to create them in the database schema
associated with the MapViewer data source. However, if the user associated with that
schema does not have sufficient privileges to create new types, a privileged user must
create the types by connecting to the data source schema and entering the following
statements:
CREATE or REPLACE type MV_STRINGLIST as TABLE of VARCHAR2(1000);
CREATE or REPLACE type MV_NUMBERLIST as TABLE of NUMBER;
CREATE or REPLACE type MV_DATELIST as TABLE of DATE;
Cheers.

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Used Relocate Masters to new g-drive. Lost Aperature Library and meta data

how i crashed aperature
1.56 aperature
all updates current
tiger 10.4.11
all updates current
Goal was to move Aperature Library from MBP to g-drive.
what i did:
1. "Relocate Master" to g-drive. Success. Aperature still viewed all Files with all Meta Data normally.
2. Collapsed "Library" in Projects Panel. Did not delete Projects. Did not delete any Photos.
3. Preferences > Image Management > set new Aperature Library on g-drive.
4. Uploaded new photos from a Canon and viewed them successfully.
5. Ejected g-drive correctly.
what Aperature is not doing now:
1. no Projects show up.
2. no Referenced Photos show up.
3. no Vaults show up. Note: the Vault was originally on MBP, but I foolishly did not set one up on g-drive before moving. I also have a back up Vault on a different g-drive that is, unfortunately, not up to date with all current photos before move.
4. Aperature Library on g-drive is there but can not open any files in it. [note: item 3 above]
5. Image files listed in g-drive but won't open in Aperature but do open in Preview or Gimp, etc.
6. Aperature does not show any Vaults nor does it access Referenced Files.
*Can you help ?*
*I guess these would be the questions:*
1. How can I get the pics from the g-drive back into an Aperature Library with all the previous Meta Data attached to each Version?
2. How do I get the Aperature Library - I put on the g-drive - to open in Aperature?
3. If #1 is impossible - I guess I set up a Vault on the g-drive and move what I have from the back up Vault mentioned above.
*Thanks for any advice !!!*

If I an not mistaken, I may have read through your pdf's quite a while ago. I am still trying to digest them and then apply them to my needs. If I had known that small projects may be faster and easier to manage than larger ones I would have done my imports quite differently. I chose to use Aperture in the first place to organize and add information to photos. I archive old photos. In particularly from 350th Fighter Group, WWII in the Mediterranean. So one "Project" of mine is =/-5000 images in the form of TIFF scans. I imported all of these into 1 project. Then I started applying metadata and keywwords like crazy. This allowed me to start to sort the photos into categories and find multiple version of the same image. I started making stacks of all the multiples. Then with smart albums and smart web sites I was able to create what might now be smaller projects. Since I gather information from others by sharing these photos on a website, You are able to see the smart websites here.
http://web.me.com/vizcarraguitars/350thFighter_Group_Blog/350th_FG_Blog/350th_FGBlog.html
One cool thing is that various images reside in multiple smart webs based on common keyword. But now that I have all this organization, it seems it is time to put all my originals in a similar order via Aperture.
By the way, my files are reference files unless I make the mistake of importing them without leaving them in there original location.
I am thinking of starting over with blue folders. But I can't seem to get my head around it.

[FileAdapter] Reading meta data

Similar Messages

Maybe you are looking for