Filed NH Certificate of Formation for Business Verification?

I am in the process of enrolling for a Business iOS Developer Account. I was asked to fax in supporting documents for my business identity. One of which was stated to be allowed was the Certificate of Formation. After calling the State of NH and because I never got an actual "certificate" they said that the copy of my application that I sent to them that was returned stamped as filed with my business id number on it was the actual certificate. So I sent this in. Called today to see about the status and was told by Apple that that document would not suffice as a Certificate of Formation even though it says Filed and has the assigned Business ID on it. Has anybody else had an issue with Certificates of Formation with Apple? How could I remidy this? Thank you all for your time.

yes, we have gone through this note. The basic requirements (SAP CryptoLib) are fullfilled, we have productive other HTTPS connection, which are working fine. Those partners provide us a valid certificate with trusted root CA.
About the hostname, the provider only gave us a fix IP adress. We have no hostname. I assume that the target host value is important when XI tries to match that value with the server certificate's CN value (?). And because the certificate contains an IP (not hostname), that should be fine (?)
Edited by: Christian Sy on Apr 16, 2009 6:34 AM

Similar Messages

Document format for business applications

Hi all,
I want to create a technical documentation of my company's business applications which i can also managed with on going system changes.
I have included the following topics:
- Project Description
- Process Flows
- ERD (logical and physical)
- Database details
- forms details
- reports details
Please provide feedback on my selection of topics, give your suggestions for any modification. If any body have some format please let me know.

http://help.sap.com/saphelp_nw70/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Not sure but Check the option of
<key1>
<col2 compareOperation=u201DLTu201D>val2old</col2>
<col2 compareOperation=u201DGTu201D>val2old</col2>
</key1>
Thanks,
Beena.

As is study,business blue print - Format for recording MM activity

hi,
I need the standard format for recording the AS IS STUDY,Business blue print relevant to MM.any one can help me..Pl.send to [email protected]
sri

Dear Sujan,
check the below link for GO live strategy.
http://www.saptechies.com/sap-pdf-books-download/SAP_Go_live_strategy11248141773.pdf
Search the Google for BBP Document quastions.
Regards,
Kishore K
Edited by: kishore babu on Dec 22, 2009 8:21 AM

Format for a Mac vs PC

Hi,
I have never asked this before but I would like to have a betterunderstanding, I have seen this a lot, when you buy a new external hard drive that says “ready formatted for mac”or in some tutorials on the internet they recommend ... “format for Mac before you use your new HD ” and I have noticed that in some cases I have not formatted my new external HDs and they just worked, so I was wondering what’s the difference between a formatted HD for PC vs Mac.
Can some explain the differance between a formatted HD for PC vs Mac or direct me to where I can find some info about formatting types?
Does this mean that I cannot use the same hard drive for both a PC and Mac? In otherwords this means that I cannot switch a HD back and forward between a PC and a Mac? I haven’t tried this since I’m afraid to corrupt the files other HD itself but it would be nice to know if this is possible.
Can some explain a little bit about the different format types?
Thanks

Mac uses a filing system called HFS+ [Hierarchical Filing System Extended] for writing files to a drive. Windows uses a filing system called NTFS [New Technology Filing System]. The older Windows system was FAT(32) [File Attribution Table-- 32-bit]. Mac can read and write to HFS+ and FAT32 but can read only from NTFS (without third-party plug-ins). Most commercially-available external drives are formatted so that Windows users can put the drives into service without any preparation for their machines; this means that most drives from BestBuy etc are formatted FAT32, which creates no problems for general usage with a Mac. In order to use such a drive for Time Machine you would have to re-format to HFS+. That is the message you would get if you decided to use such a drive for Mac backup. The Time Machine process would happily do that for you to prepare the drive. However, it is possible to do that hands-on yourself by using Disk Utility. When a drive isuch as a LaCie or G-Tech is purchased from an Apple Store or Apple Reseller the drive is already formatted HFS+ for Mac users which is why the box label would read that it is ready for Mac (but not for Windows!).
As a rule of thumb, I clean a drive before I ever begin to write files to it by using Disk Utility to erase and format. That way the drive is doulble-checked for bad sectors before use where your important files will be stored. If you have already written files to a drive then it cannot be re-formatted without wiping it clean because the allotment sectors have to be prepared on an empty drive. Don't be confused about partitioning since a drive already formatted in HFS+ using the GUID Partition Table can be partitioned 'on the fly' (so to speak) without erasing the files.

Format of Business Blue print

What is the format of Business Blue print?

Hi Gopala Rao.,
Business blue print is a WORD doccument,In that we clearly mention our company code,sales organzation... All enterprise structure and all the order types we are using,delivery types,Partner functions..... Like that all the topics covered for the particular company,IT IS NOT MANDATORY that all the topics in SAP SD are mentioned,It depends on the client requirement,we map their business process and we cover all the things in final blueprint
REWARD IF helpfull
Thanks & Regards
Narayana

Formating existing Business Partner Telephone No.

Hi,
We would like to format the phone nos. of existing business partners(BP) in CRM to xxx.xxx.xxxx.
I have written a program ...and the formatting works fine.
The problem comes when I am trying to update the BP's...I have written a BDC..and it doesn't seem to work. I am not very good in BDC...so would appreciate if somebody could help tweaking the code.
Further, would appreciate to know..whether using a BDC is the right approach...is there any BAPI's that can do the trick.
Once again, thanks to everbody once again.
Rajib
Code:
*& Report ZTEST_RD1                                                   *
REPORT ZTEST_RD1       .
tables : but000.
data: begin of t_output occurs 0,
        bp like but000-partner,
        home_phone like BAPIADTEL-TELEPHONE,
        mobile_phone like BAPIADTEL-TELEPHONE,
        fax like BAPIADTEL-TELEPHONE,
        work_phone like BAPIADTEL-TELEPHONE,
       end of t_output.
data: workphone like BAPIADTEL-TELEPHONE.
data: begin of t_bp occurs 0,
        partner like but000-partner,
      end of t_bp.
data: w_addressguid like bapibus1006_addresses_int-addrguid,
      w_addrnr like bapibus1006_addresses_int-ADDRNUMBER,
      w_addressdata like bapibus1006_address,
      t_address like bapibus1006_addresses occurs 0 with header line,
      t_return like bapiret2 occurs 0 with header line,
      t_tel like bapiadtel occurs 0 with header line,
      t_fax like bapiadfax occurs 0 with header line.
bdc declaration
      Batchinputdata of single transaction
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
      error session opened (' ' or 'X')
DATA:   E_GROUP_OPENED.
      message texts
TABLES: T100.
bdc
start-of-selection.
selection-screen begin of block b2 with frame title text-105.
*Business Partner Number
select-options: s_bp     for but000-partner, " obligatory,
                   s_bpkind for but000-bpkind, " obligatory,
                   s_bptype for but000-type. " obligatory.
selection-screen end of block b2.
end-of-selection.
get the basic data
select partner
            from but000
            into table t_bp
              where partner in s_bp     and
                            bpkind in s_bpkind and
                            type    in s_bptype.
loop at t_bp.
write :/1 t_bp-partner.
get the address guids.
    call function 'BAPI_BUPA_ADDRESSES_GET'
      EXPORTING
        businesspartner       = t_bp-partner
        addresstype           = 'HOME'
      IMPORTING
        standardaddressguid   = w_addressguid
        STANDARDADDRESSNUMBER = w_addrnr
      TABLES
        addresses             = t_address
        return                = t_return.
Get Address Detail
    call function 'BAPI_BUPA_ADDRESS_GETDETAIL'
      EXPORTING
        businesspartner = t_bp-partner
        addressguid     = t_address-ADDRESSGUID
      IMPORTING
        addressdata     = w_addressdata
      TABLES
        bapiadtel       = t_tel
        bapiadfax       = t_fax.
populate the data in the output table
    t_output-bp = t_bp-partner.
home and mobile phone
    loop at t_tel.
      if t_tel-TELEPHONE is not initial.
        if t_tel-R_3_USER = '1'.                "Home Phone
          perform format_phone USING t_tel-TELEPHONE.
          t_output-home_phone   = t_tel-TELEPHONE.
        else.                                   "Mobile Phone
          perform format_phone USING t_tel-TELEPHONE.
          t_output-mobile_phone = t_tel-TELEPHONE.
        endif.
      endif.
    endloop.
get fax number
    loop at t_fax.
      if t_fax-FAX is not initial.
        perform format_phone USING t_fax-FAX.
        t_output-fax = t_fax-FAX.
      endif.
    endloop.
get work number
    select single ADEXT from BUT020 into workphone
    where PARTNER = t_bp-partner
    and ADDRNUMBER = w_addrnr.
    if workphone is not initial.
      perform format_phone USING workphone.
    endif.
    t_output-work_phone = workphone.
    clear: t_tel[], t_fax[], workphone.
    append t_output.
    clear: t_output.
endloop.
write :/1 ' bp ', 20 ' home_phone ', 35 ' mobile_phone ',
            50 'fax', 75 'workphone'.
skip 3.
loop at t_output.
    perform bdc_update.
    write :/1 t_output-bp, 20 t_output-home_phone, 35
    t_output-mobile_phone, 50 t_output-fax, 75 t_output-work_phone.
endloop.
*&      Form format_phone
      text
     -->P_PHONE    text
FORM format_phone USING p_phone.
Data: w_strlen type i,
       w_offset type i.
clear w_offset. clear w_strlen.
w_strlen = STRLEN( p_phone ).
do w_strlen times.
    if p_phone+w_offset(1) na '0123456789 '.
      p_phone+w_offset(1) = ' '.
    endif.
    w_offset = w_offset + 1.
enddo.
condense p_phone no-gaps.
clear w_offset. clear w_strlen.
w_strlen = STRLEN( p_phone ).
if w_strlen gt '10'.
    w_offset = w_strlen - 10.
endif.
p_phone = p_phone+w_offset(10).
w_strlen = STRLEN( p_phone ).
if w_strlen ne '10'.
    MESSAGE
    'Please enter 10 digit phone number in the format'
    TYPE 'E'.
else.
    concatenate p_phone(3) '.' p_phone3(3) '.' p_phone6(4) into
p_phone.
endif.
ENDFORM.                    " format_phone
*&      Form BDC_DYNPRO
      text
     -->PROGRAM    text
     -->DYNPRO     text
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form bdc_update
      text
--> p1        text
<-- p2        text
FORM bdc_update .
perform bdc_dynpro      using 'SAPLBUS_LOCATOR' '3000'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BUS_LOCATOR_SRCH_GO'.
perform bdc_field       using 'BDC_CURSOR'
                                'BUS_LOCA_SRCH01-SEARCH_TYPE'.
perform bdc_field       using 'BUS_LOCA_SRCH01-SEARCH_TYPE'
                                '1'.
perform bdc_field       using 'BUS_LOCA_SRCH01-SEARCH_ID'
                                '1'.
perform bdc_field       using 'BUS_JOEL_SEARCH-PARTNER_NUMBER'
                                '1000'.
perform bdc_dynpro      using 'SAPLBUS_LOCATOR' '3000'.
perform bdc_field       using 'BDC_OKCODE'
                                '=%_GC 116 3'.
perform bdc_field       using 'BUS_LOCA_SRCH01-SEARCH_TYPE'
                                '1'.
perform bdc_field       using 'BUS_LOCA_SRCH01-SEARCH_ID'
                                '1'.
perform bdc_field       using 'BUS_JOEL_SEARCH-PARTNER_NUMBER'
                                '1000'.
perform bdc_dynpro      using 'SAPLBUS_LOCATOR' '3000'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BUS_MAIN_SAVE'.
perform bdc_field       using 'BUS_JOEL_MAIN-PARTNER_ROLE'
                                '000000'.
perform bdc_field       using 'BUT000-NAME_FIRST'
                                'KUMAR'.
perform bdc_field       using 'BUT000-NAME_LAST'
                                'ASHOK'.
perform bdc_field       using 'BUT000-NAMEMIDDLE'
                                'S'.
perform bdc_field       using 'BUT000-NAME1_TEXT'
                                'KUMAR ASHOK'.
perform bdc_field       using 'BUS000FLDS-LANGUCORR'
                                'EN'.
perform bdc_field       using 'BUT000-BU_SORT1'
                                'KUMAR'.
perform bdc_field       using 'BUT000-BU_SORT2'
                                'ASHOK'.
perform bdc_field       using 'ADDR2_DATA-HOUSE_NUM1'
                                '5638'.
perform bdc_field       using 'ADDR2_DATA-STREET'
                                'SHAWN TER'.
perform bdc_field       using 'ADDR2_DATA-CITY2'
                                'GWINNETT'.
perform bdc_field       using 'ADDR2_DATA-POST_CODE1'
                                '30092-1536'.
perform bdc_field       using 'ADDR2_DATA-CITY1'
                                'NORCROSS'.
perform bdc_field       using 'ADDR2_DATA-REGION'
                                'GA'.
perform bdc_field       using 'ADDR2_DATA-COUNTRY'
                                'US'.
perform bdc_field       using 'ADDR2_DATA-TIME_ZONE'
                                'EST'.
perform bdc_field       using 'ADDR2_DATA-PO_BOX'
                                '02255217'.
perform bdc_field       using 'ADDR2_DATA-POST_CODE2'
                                '30045-1111'.
perform bdc_field       using 'SZA7_D0400-TEL_NUMBER'
                                '678.770.0001'.
perform bdc_field       using 'SZA7_D0400-MOB_NUMBER'
                                '678.770.0002'.
perform bdc_field       using 'SZA7_D0400-FAX_NUMBER'
                                '678.770.0003'.
perform bdc_field       using 'BDC_CURSOR'
                                'BUS000FLDS-ADEXT'.
perform bdc_field       using 'BUS000FLDS-ADEXT'
                                '678-770-0004'.
perform bdc_field       using 'SZA11_0100-TEL_COUNTR'
                                'US'.
perform bdc_field       using 'SZA11_0100-MOB_COUNTR'
                                'US'.
perform bdc_field       using 'SZA11_0100-FAX_COUNTR'
                                'US'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                                '=YES'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                                '=YES'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                                '=YES'.
perform bdc_dynpro      using 'SAPLBUS_LOCATOR' '3000'.
perform bdc_field       using 'BDC_OKCODE'
                                '=BUS_MAIN_SAVE'.
perform bdc_field       using 'BUS_JOEL_MAIN-PARTNER_ROLE'
                                '000000'.
perform bdc_field       using 'BUT000-NAME_FIRST'
                                'KUMAR'.
perform bdc_field       using 'BUT000-NAME_LAST'
                                'ASHOK'.
perform bdc_field       using 'BUT000-NAMEMIDDLE'
                                'S'.
perform bdc_field       using 'BUT000-NAME1_TEXT'
                                'KUMAR ASHOK'.
perform bdc_field       using 'BUS000FLDS-LANGUCORR'
                                'EN'.
perform bdc_field       using 'BUT000-BU_SORT1'
                                'KUMAR'.
perform bdc_field       using 'BUT000-BU_SORT2'
                                'ASHOK'.
perform bdc_field       using 'ADDR2_DATA-HOUSE_NUM1'
                                '5638'.
perform bdc_field       using 'ADDR2_DATA-STREET'
                                'SHAWN TER'.
perform bdc_field       using 'ADDR2_DATA-CITY2'
                                'GWINNETT'.
perform bdc_field       using 'ADDR2_DATA-POST_CODE1'
                                '30092-1536'.
perform bdc_field       using 'ADDR2_DATA-CITY1'
                                'NORCROSS'.
perform bdc_field       using 'ADDR2_DATA-REGION'
                                'GA'.
perform bdc_field       using 'ADDR2_DATA-COUNTRY'
                                'US'.
perform bdc_field       using 'ADDR2_DATA-TIME_ZONE'
                                'EST'.
perform bdc_field       using 'ADDR2_DATA-PO_BOX'
                                '02255217'.
perform bdc_field       using 'ADDR2_DATA-POST_CODE2'
                                '30045-1111'.
perform bdc_field       using 'SZA7_D0400-TEL_NUMBER'
                                '678.770.0001'.
perform bdc_field       using 'SZA7_D0400-MOB_NUMBER'
                                '678.770.0002'.
perform bdc_field       using 'SZA7_D0400-FAX_NUMBER'
                                '678.770.0003'.
perform bdc_field       using 'BDC_CURSOR'
                                'BUS000FLDS-ADEXT'.
perform bdc_field       using 'BUS000FLDS-ADEXT'
                                '678-770-0004'.
perform bdc_field       using 'SZA11_0100-TEL_COUNTR'
                                'US'.
perform bdc_field       using 'SZA11_0100-MOB_COUNTR'
                                'US'.
perform bdc_field       using 'SZA11_0100-FAX_COUNTR'
                                'US'.
perform bdc_transaction using 'BP'.
CALL TRANSACTION 'BP' USING BDCDATA
                    MODE 'N' UPDATE 'S'
                    MESSAGES INTO MESSTAB.
message tab
DATA: L_MSTRING(480).
LOOP AT MESSTAB.
    SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA
                              AND   ARBGB = MESSTAB-MSGID
                              AND   MSGNR = MESSTAB-MSGNR.
    IF SY-SUBRC = 0.
      L_MSTRING = T100-TEXT.
      IF L_MSTRING CS '&1'.
        REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.
        REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.
        REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.
        REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.
      ELSE.
        REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.
        REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.
        REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.
        REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.
      ENDIF.
      CONDENSE L_MSTRING.
      WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).
    ELSE.
      WRITE: / MESSTAB.
    ENDIF.
ENDLOOP.
SKIP.
end message tab
ENDFORM.                    " bdc_update

Rajib,
There won't be any bapi to convert or format telephone number. But you can find a bapi to update business partner. Try with bapipartner in se37.
Have you tried changing telephone number with XXX.XXX.XXX. I don't think system will accept with this format for telephone number field.
Regds
Manohar

When I load Windows 7 in Bootcamp it freezes saying partition is not formatted for NTFS(?)

I have to set up a partition on my new iMac to get a piece of business software to load. I tried Crossover and Parallels. Set up a 250 GB partition in Bootcamp and things seemed to be going fine with the windows 7 Ultimate loading but then i get a message like Hard drive not formatted for NTFS. Suggestions

I Just figured it out! I Have a Mac Mini 2012 with 2 Kingston 128 GB SSDs. I thought it was having 2 internal drives that was making problems... Had exact same issue as all of you. First I would get a no NTFS partition error after I used Boot Camp Assistant to make a USB install stick for Windows 7 Ultimate x64.
My solution was simple, removing EVERYTHING connected to my mac mini, including my Wireless mouse and Keyboard. All I had connected was my Apple wired keyboard, the install USB drive, and my monitor. Having a Second internal SSD drive was not the issue.
I formatted the BootCamp partition, and POW! it actually worked. The error that setup couldnt install on this drive, and see error log didnt show up! Try that! it might work!

Date formats for SQL statements used by recordset object

Hi,
Date formatting appears to be quite problematic for Business One. I did a forum search for date issues and I don't think I saw any of them with an "answered" status. I have an issue with formatting a date for the creation of an SQL statement that the DI sends to SQL Server 2005. I need to format a date so that the localization parameters don't matter for either the client machine or SQL Server's machine. We don't have a problem as long as our machines are localized as USA.
I have PL 22 and I have a form - ours - where I use the Today() function to fill a date field. So this is a date that is not entered by the user. The result of this function is consistent with the localization parameters on my machine. We have two other date fields on the form where the user must type in the date.
As a test, I changed my machine to the UK parameters. I then set up the language parameters of Business One for English(United Kingdom). I changed the date format specifications in Business One so that its format is dd/mm/yy. I then brought up the form and the field that is formatted by the above function arrived in the form's field as dd/mm/yy. I then typed in the two other dates in the same format and added the record to the database. The form's table is user-defined.
I dismissed the form then brought it back up loaded with the new record. The date that was entered by the function appeared in USA format (mm/dd/yy). The dates that were typed in appeared in the Business One format (dd/mm/yy). This of course is not consistent.
When I looked at what got into the database, the formats were the opposite. Weird! To make matters really confusing, I run an SQL statement within SQL Server Mgt Studio, and use the WHERE clause to filter on the date that was based on the function. It didnt matter what format I used for the WHERE clause, the record came up. Does anyone have any idea about how I can ensure that I always use the correct date format for SQL statements passed by Business One to SQL Server regardless of where in the world the application is being run?
Thanks,
Mike

Ian,
Here's what I'm concerned about: Im using the date in a WHERE clause.
Assume the date is Aug 3, 2007.
"SELECT * FROM Table WHERE StartDate > 8/3/2007"
OR
"SELECT * FROM Table WHERE StartDate > 3/8/2007"
If the client machine is set up as USA, the today function will provide the date as formatted in the first query. If the database server is setup as lets say the UK, I believe that SQL Server query parser will interpret the date as Mar 8, 2007.
If the client machine is set up as UK, the today function will provide the date as formatted in the second query. If the database server is setup as lets say USA, I believe that SQL Server query parser will also interpret the date as Mar 8, 2007.
In both cases it would be wrong.
I know I could use the DATEPART function to get the three parts and this will make the code indifferent to the localization specs of the client machine. I need to then be able to concatenate those date parts for the WHERE clause so that the localization specifications of the database server dont matter.
Thanks,
Mike

Need Help with Skype for Business!

I purchased the Skype for business for an entire year. Now, I cannot for the life of me figure out how to log in. Do I have to link it to original skype? I am new to this and have no knowledge of the formats of Skype or it for business.
Subject/title expanded to reflect post content a little more accurately.

Hi, and no need to feel stupid!
Welcome to this on-line community.
A few questions for you to clarify the Skype product you are working with, so we can send you in the right direction in an effort to resolve the problem:
Are you referring to either Skype Manager, or Skype Connect? Do you recall what "business" product you have?
Or, what are you trying to sign in to? A Skype account via the Skype website, or the software itself?
This FAQ article should help unravel the mysteries of the differences between a personal Skype account and a Skype For Business (formerly known as Lync) configuration: https://support.skype.com/en/faq/FA34551/what-s-the-difference-between-skype-and-skype-for-business
Thanks in advance for providing the additional details.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

List Export Format for Prospects

Hi,
I am looking for a list export format for Prospects in Siebel Marketing. An example load format was provided and I am able to load prospects successfully but I need the list export format for Prospects to be able to launch. The OBI version used is 10.1.3.4.1 and while this provides example export formats for Accounts and Contacts it doesn't for Prospects. Does anyone know if there is such an export format for Prospects or would I need to create my own list format and subject are?
Best regards,
Pete
Edited by: 855262 on Apr 28, 2011 8:06 AM

Hi,
I solved the problem myself. It was caused by the source (S_PRSP_CONTACT) for the logical table OLTP Prospects in the business model Marketing Contact List being inactive by default.

Field Selection for - Invoice Verification (MIRO)

Dear Experts,
Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
I want BUSINESS AREA field mandatory in MIRO.
Thanks in Advance

Hi,
Business area is linked to other organizational units (plant, division,
distribution chanel, cost center). It can be defined using assigments
(e. cost centers to the business area) or combinations of information
(like plant and division determination).
It is usually derived from the account assignments of the cost items
and inherited from there into the vendor line item.
For MIRO,to automatically fill the business area it must be able to
uniquely identify a business area.
This means that for multiple materials each one must have the same
business area for IV to fill the vendor line item.
This is the way the system is designed.
The business area can be set as 'optional' field and is not 'mandatory'
by design.It can be customised according to the individual needs.
Please check the field status in tr OB41/OB14 and OB23 for the vendor.
Best Regards,
Arminda Jack

Date format for parameter data entry

I've just started working on MS SQL Server 2008 for the first time and am using Crystal XI11.5. I have a date parameter used to pick data. It works fine but the users are used to entering dates in mm/dd/yyyy format but this parameter forces users to enter using yyyy-mm-dd.
Normally I am not too concerned as there is the calendar but I have a couple of keyboard users who would like to just enter in the date format they are used to. I can't find any spot in Crystal to change the data entry format for the dates.
I do understand that SQL Server does store dates in yyyy-mm-dd format so is this why I only have this option? Any way to change it? I do have dates in the report presenting in d-MMM-yyyy format without problem, it's just the date entry prompt.
TIA rasinc

The later versions of CR will not allow you to directly edit the SQL statement. You actually have to add a Command and remove the tables from the data source. You can, if you wish, copy the SQL from the "Show SQL Query" and paste it into the Command.
The reason I tried to delete my previous comment is because it dawned on me (after I made the comment) that the date picker control itself, won't accept any format other than YYYY-MM-DD. So, while you can write the SQL to accept a variety of date formats, you won't be able use any of them while using that control.
The CR date picker control can be found (and therefore replaced by someone w/ more guts than me) in the following locations...
C:\Program Files\Business Objects\Common\3.5\crystalreportviewers115\prompting
C:\Program Files\Business Objects\Common\4.0\crystalreportviewers12\prompting
Jason

Skype for business for Office 365

Hi Team,
I need to upgrade my current Lync 2013 to Skype for business and as per information i got an update released by Microsoft KB2889923 ... this is used to upgrade Lync 2013 to skype for business.......but in case of Office 365 this update dosent seems to work......
so i wanted to know if there is any other update or package or any other way to upgrade office 365 Lync.

Hi,
Please check out this thread
http://community.office365.com/en-us/f/172/t/345370.aspx
“Q2. Where can I download Skype for Business since it does not appear to be included with the Office365 download file? ====================== A2. You need to manually update your Office application,
then you will be able to upgrade to Skype for Business. You can to do this on your Outlook client: Open your Outlook client ->
FILE ->
Office Account ->
Apply updates”
And this issue is more related to Office 365 application, we would like to give a hand, but we are not the specialists in this filed. Thanks
for your understanding.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Skype for Business Client update

Hi,
First of all let me get this out of the way "Microsoft Office 365 support sucks".
now the simple question:
If office proplus is installed via portal (through on-click run), how does it get the update for skype for business?
I have over 1000 users and its not feasible to run the updates via an office application on each machine.
(Note: getting update does not mean UI change. it simply means the client is updated and ready to accept the UI once it is allowed via csclientpolicy in a update Lync server environment).
(Note 2: the useless O365 support says it will come through windows updates; I have done multiple tests on different test machines and that is not correct. Another technet says office proplus updates are done through scheduled tasks. Even if the office automatic
update task runs, the client does not get updated with new Skype for Business.)

Hi Atif7865,
Please check out this thread
http://community.office365.com/en-us/f/172/t/345370.aspx
“Q2. Where can I download Skype for Business since it does not appear to be included with the Office365 download file? ====================== A2. You need to manually update your Office application,
then you will be able to upgrade to Skype for Business. You can to do this on your Outlook client: Open your Outlook client ->
FILE ->
Office Account ->
Apply updates”
And this issue is more related to Office 365 application,
we would like to give a hand, but we are not the specialists in this filed. Thanks for your understanding.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

Hi,
In the Dealer Portal, Vehicle Sales Role --> Personalization.
I am getting below Warning message.
The Web Dynpro component assignment for business partner is missing.
As per my investigation found below.
Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
BUT do NOT understand the name of WebDynpro Component to provide.
What are the entries or WebDynpro component names to fill in below?

Hi Hussain,
Could you share the step-by-step solution? Thanks.

Filed NH Certificate of Formation for Business Verification?

Similar Messages

Maybe you are looking for