Filed not reflecting in infopackage data selection screen

Hello Gurus,
I have added a time stamp fiield in generic datasource in R3 and selected that field,but when i replicate the data source in BI and go to infopackage data selection screen,i dont see that field.I tried all the possible things but its not working.
Please help me.
Thanks in advance.
Regards,

Hi,
Did you select that Time stamp field as Selection field in RSA6? If not then select it as selection field and activate and then replicate the DS in BW and then check if that comes in Infopackage level.
Hope this helps..
Murali

Similar Messages

Special Characters in InfoPackage Data Selection

Hi Experts,
Is it possible to include special key such as * in the data selection tab in the infoPackage? e.g. *AB
I have created a custom DataSource to extract all work order with costs data.
However we only need work order data with revision number that finishes with 'AB' for reporting. (if I do not apply this selection, extracted data will be too big).
i.e.
    REVNR
    00000012AB --> to be included in extraction
    00000231AB --> to be included in extraction
    00012322AB --> to be included in extraction
    Y07WK06    --> excludes this record
    00000007AB --> to be included in extraction
Can this be achieve by using '*AB' in the data selection screen?
Currently, SELOPTS of custom DataSource is been set to '0'. (where can I change this SELOPTS value to something else?)
If special key is not allowed in the data selection screen, can you suggest any alternative solution?
Kind regards,
Steve

Hi steven,
   Yes you can do this one at info package level by selecting the ABAP Coding at Type (variable change for selective values) at selection tab of info package.
Here you need write ABAP coding according to your business requirements.
or
You can drop unnecessary data at update routine.
Regards,
PRK
Message was edited by: PRK

Alv is not appearing in the same Selection Screen

Hi people..
First time using cl_gui_docking_container.
I have a problem, my alv is not appearing in the same Selection Screen.
is there somethign wrong with my code? it doesnt even show a dump or catch.
Regards
DATA: lo_dock TYPE REF TO cl_gui_docking_container,
       lo_cont TYPE REF TO cl_gui_container.
DATA: gr_table      type ref to cl_salv_table,
       gr_functions type ref to cl_salv_functions,
       gr_display    type ref to cl_salv_display_settings,
       gr_columns    type ref to cl_salv_columns_table,
       gr_column     type ref to cl_salv_column_table,
       gr_sorts      type ref to cl_salv_sorts,
       gr_agg        type ref to cl_salv_aggregations,
       gr_filter     type ref to cl_salv_filters,
       gr_layout     type ref to cl_salv_layout,
       color         type lvc_s_colo,
       key           type salv_s_layout_key.
   SELECT * INTO TABLE tbl_datos_items FROM zsd_micros_bd.
CHECK lo_dock IS INITIAL.
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = sy-dynnr
         ratio = 70
         side = cl_gui_docking_container=>dock_at_bottom
         name = 'DOCK_CONT'.
     IF sy-subrc <> 0.
       MESSAGE 'Error in the Docking control' TYPE 'S'.
     ENDIF.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( )

Hi ,
First you have to create you own screen ( dynpro ) with a screen number ( 0101 for exemple ) , you need to pu a custom control in it , name the custom control ( lo_cont )
For the screen created you need to create a module for the PBO , in this module you sould put you code for displaying the liste :
Module STATUS_0101 output.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( ).
Endmodule.
and give the screen number when calling lo_dock
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = '0101'.
tested
Regards

Infopackage Data Selection Problem

Hi All,
When i load master data from source system, in Infopackage data selection tab i give some criteria (e.g Customer number = 1000) But in infopackage the data load with all customer.(Not only 1000)
How can i solve this problem??

Hello Ozan,
Please check the datasource in RSA3 and make sure that its working for the same selection.
Is there any routine in your infopackage and what is your source system?
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Not able to put data selection condition in data selection tab of infopakag

I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
I have checked in transfer structure as well , the fields are marked for selection.
Please advice .
Please tell me what could be the reason for this problem

Ashutosh,
As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
Hope this helps...
*******Assign Points if it helps********
Thanks,
Gattu

How to debug a ABAP Routine which is in Infopackage Data selection Tab

Hi ,
Please let me know How to debug a ABAP Routine which is in Infopackage Data selection Tab.

Hi,
You can try to create infinite loop:
DATA: STOP.
WHILE STOP IS INITIAL. ENDWHILE.
Start InfoPackage and then go to SM50 and swich on debugging for your process. Then in debugger you can change value of STOP variable to skip the loop.
Krzys

Routine in Infopackage Data selection Tab

HI,
I am having one InfoObject (marital staus) in InfoPackage Data selection Tab.
Now I want to write a ABAP routine for that infoObject in Infopackage to select only those records of marital status = SINGLE.
    I am new to ABAP . please let me know what code should I write in this routine.

Hi Kris,
You would do it like this:
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'MARITAL_STATUS'.
          l_idx = sy-tabix.
          move: 'I'      to l_t_range-sign,
                'EQ'     to l_t_range-option,
                'SINGLE' to l_t_range-low.
          modify l_t_range index l_idx.
Thanks,
Joseph

Infopackage-Data Selection Tab Values Get Populated Automatically.

Hi All,
In infopackage dataselection tab currently we are entering manually values for 0version info object and process has to be done for 4 differenct infopackagewe are getting a ticket for doing this process for every month.So 0version values would not be unique values ,all the values are different,for instancec10,c99,c11.
user community felt that this one is a time consuming take they want to customize it and they want to enter the value on their own thorug some custom sap screen.
we cannot give access to the user for the infopackage selection and all .we have figured out like we have to create a custom t code and give acces to the user for that t code alone.
If the user enter the 0version value in the front end of it should get reflected in infopackage dataselection tab.
It would be really grateful if u have shared ur thought on the same.
Regards,
Sakthivel S

Hi,
You could use the TVARVC table instead of creating a Z-control table, and allow the users to enter the data into TVARVC via the tcode you are creating.
So for instance the table entries could be as follows.
NAME
SIGN
OPT
LOW
HIGH
IP_1
I
EQ
V1
IP_2
I
BT
V3
V4
IP_3
I
EQ
V9
Now, in the first InfoPackage, write the ABAP routine to read the data from TVARVC where the NAME = IP_1. Based on the results the InfoPackage restrictions will be populated by the routine.
In the second InfoPackage you read based on NAME = IP_2. And so on. Rest of the routine code is same as in the first InfoPackage.
This way you can be assured that the different IPAKs will not have overlapping criteria as long as the table entries are correctly maintained.
Regards,
Suhas

Infopackage Data Selection

Hi Experts,
I have a infopackage 000 version fullload. When we load version 000 based on the current period we need to go back 12 months and go forward 6 months. This should be done via a ABAP routine in the infopacakge. I have included the ABAP routine in the infopackage. Loaded data based on current period when i refresh the workbook it has displayed empty results. I check with R/3 system for 000 version data is available.
Regards
Prasad

Hi,
First Check if the Routine in the IP is working good by using the Test tab in selection Screen.
If you find OK then Check if the selections used in the Wkbook are a subset of data loaded.
Also do some minor checks like request rolledup or not.
Thanks,
Prasad

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
    l_repid             type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      dynpprog         = l_repid
      dynpnr           = '1000'
      dynprofield      = 'S_FIELD-LOW' "Select options - low value
* etc

Routine in Infopackage data selection doesnt give appropriate results...

Hi Gurus,
I need to pull data into PSA (BW 3.5) based on a certain selections in the Infopackage. Selection is based on specific values of Infoobject 0PLANT , however, as these values are multiple and do not fall in a specific range I have written a routine to derive these values.
The routine does the following steps :
- creates an internal table from /bio/mplant and deletes the plant values that I do not wish to consider in the extraction.
- delete data from l_t_range for fieldname = 'PLANT'
- Appends data from the internal table to l_t_range.
However, when I execute the infopackage, the extraction is done for ALL the 0PLANT values i.e it includes the data for 0PLANT value which have been delete from the internal table.
My routine is :
$$ end of global - insert your declaration only before this line   -
    InfoObject      = 0PLANT
    Fieldname       = PLANT
    data type       = CHAR
    length          = 000004
    convexit        =
form compute_PLANT
tables   l_t_range      structure rssdlrange
using    p_infopackage type rslogdpid
           p_fieldname    type rsfnm
changing p_subrc        like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
TYPES ls_range like l_t_range.
data: l_idx like sy-tabix.
DATA: lt_plant like /bi0/mplant OCCURS 0 with header line.
          SELECT PLANT from /bi0/mplant into lt_Plant WHERE objvers = 'A
          ENDSELECT.
          delete lt_plant WHERE plant = 'W206'.
          delete lt_plant WHERE plant = 'WF11'.
          delete lt_plant WHERE plant = 'W945'.
          DELETE lt_plant WHERE plant = 'W530'.
          read table l_t_range with key
               fieldname = 'PLANT'.
          l_idx = sy-tabix.
          DELETE l_t_range where fieldname = 'PLANT'.
          Loop at lt_plant.
                l_t_range-sign = 'I' .
                l_t_range-low = lt_plant-plant.
                l_t_range-OPTION = 'EQ'.
                append l_t_range.
          endloop.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
Any bugs in the routines ?

try this one:
Loop at lt_plant.
if lt_plant-plant ne 'WF11' or lt_plant-plant ne 'W945' or lt_plant-plant ne 'W530'.
l_t_range-sign = 'I' .
l_t_range-low = lt_plant-plant.
l_t_range-OPTION = 'EQ'.
append l_t_range.
endif.
endloop.
or
don't use a table with header ( use a standard table and use a work area to access the table ) and do an other select like this:
SELECT PLANT from /bi0/mplant
into corresponding fields of table lt_Plant
WHERE objvers = 'A
and plant ne 'WF11'
and plant ne 'W945'
and plant ne 'W530'.
I hope it helps...
Kind regard.
Tobias
Edited by: Tobias Kreuser on Aug 23, 2010 11:34 AM

InfoPackage Data Selection ignored

Hi
I have a weird issue that I hope someone can advise me on. I have created an identical generic datasource based on table USR02 in our CRM, R/3 and BW systems. Then in BW I have 3 InfoPackages (one for each datasource) with identical data selections. For the InfoPackages using the CRM and R/3 datasources I get exactly the records I expect but for the BW InfoPackage I get all records irrespective of the data selections!?
Why are the data selections ignored for the InfoPackage using the BW source system - any ideas?
Thanks
Gareth

To All
Finally found the problem. Basically the datasource in BW had the 'Field only known in customer exit' checkbox checked for the TRDAT field. I hadn't set this - the system did and would not allow be to change it. However I found SAP note 895801DataSource fields are interpreted as customer fields which seemed to suggest that this was the real problem.
I applied the note and re-created the datasource and it now work as expected.
Regards
Gareth

InfoPackage Data Selection disappear when INIT

Hi All,
Just wondering if anyone faced this issue before and/or has a solution.
I have an infopackage that is loading from an ODS to an InfoCube. The ODS has close to 20 million records.
When I do a FULL UPDATE, i am able to use the Data Selection tabe to only filter certain criteria to be pulled over to my Cube.
However, when i try to select and do an INIT, all the fields in my DataSelection tab disappears. and i am forced to load all 20 million records from the ODS.
Appreciate any input or feedback.
Regards,
Gary.

oh i see...
i thought otherwise as in the F1 for the init without data transfer, this is what is mentioned...
"If the delta process has not yet been initialized, but you want to test the delta upload, you have the option of simulating the initialization.
This runs the help entries in all the required tables in BW and in the source system, without loading any data from the source system.
In the monitor, you get a message telling you that a record has been loaded. The initialization-simulation request appears in all the data targets in which an update has taken place. However, this request contains only help entries. The simulation does not update any data in the data targets.
Dependencies
After you have tested the delta upload in this way, initialize the delta process"

Infopackage data selection & deltas

Hi BW Experts,
I have a few questions about infopackage and delta loads:
1) How to perform mulitiple data selection. e.g. company codes 1000, 1001 and 5000? I can't filter by From To data selection since I do not want to include companies 2000, 3000, etc.
2) How to perfrom delta loads for just the company codes 1000, 1001, etc.?
I would appreciate any suggestions or advice.
l_sap

Hi ,
First of all, what is the delta identifier you have for loading the deltas for 1000, 1001, etc.
For your requirement, create 2 InfoPackages,
1. For FULL loads - Here as advised by others do duplicate rows and maintain the company codes for which you want to do FULL load.
Note: Daily full loads and you can delete the overlapping requests if your target is InfoCube.
2. For DELTA loads - here maintain 1000, 1001, etc and start Init and following deltas.
Sankar Kumar

Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5

On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP     0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list?   I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!

hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE     0SR_ROLE     Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM     0CALMONTH     Last 12 Months Excluding the Current Month
2. 0CMONTH     0CALMONTH     Current Calendar Month
3. 0E_ROLE     0SR_ROLE     Role (SAP Exit)
4. 0S_RQMRC     0REQUID     Most Current Data
0FYTLFP is still not in the list!   We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith

Filed not reflecting in infopackage data selection screen

Similar Messages

Maybe you are looking for