Filed status group for Vendorn

Dear All
Iam posting an entry through transaction code F-42 by useing the posting Key 37 vendor debit and posting key 27 vendor credit. I want Profit center field in optional which was not their. This is the reason entry is not been posting because i made profit center mandatroy. Now due to not giving the profit center entry is not been posted.
I check field status group in OBC4, FBKP for posting key. But it is not working.
Please give me the solution to solve this problem.
Regards

HI
As mentioned by  Gerard  u would find the field for profit centre
Please check the priorities that you have set.
The priority would always be  taken as SDRO
Eg: in obc4 you have mentioned the profit centre suppress and at posting key level you have given as optional u2026.finally the field would be suppress as per the priority rule.
Suppress and required would lead to error.

Similar Messages

  • Field Status Group for Special G/L Indicators

    Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well.  But when it comes to general posting, they have different screen numbers.  One SAPMF05A 303 and the other one is SAPMF05A 304.  How did this happen?

    Hi Noel,
    As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
    Regards
    andrew

  • Field Status Group For MIRO

    Dear Friends
    Pls say me where we can get the field status group for Miro header level where i got a problem to make the business area manditory.
    Regards
    Vinay Bhaskar

    Hi vinay
    for busienss place we can make the field mandatory thorugh validations it is not possible through FSG
    Plz reward the point if it is useflull
    Regards

  • Carrier Details on Field status group for vendor master

    Hi,
    I have a requirement to make the SCAC and Carrier freight group as required fields on vendor master .
    but the standard SAP system requires/ allows three fields : SCAC , carrier freight group and Service agent procedure group as mandatory to be activated under the 'carrier details ' column in the field status group (transaction OB23 and OBD3).
    I want to know if there is a way to flag just the SCAC and carrier freight group as required fields for entry in vendor master .
    Thanks
    Naga Yarramsetty

    Hi All,
    Thanks for your reply. With user exit and validation, I cannot create mandatory mark in FS00. Actually SAP make this description always mandatory. But there is no mandatory mark in this column. I just want to create mandatory mark in this column. Need you advice.
    Thanks,
    John

  • Check G/L field status group for Business area

    Hi, when I set the buiness area, I set field status group to required for BA field, the setting always check the BA field on accouting doc. But some G/L is automatic posted, always show "Business area is a required field for G/L account ...",
    Can you help me to slove, thanks

    Check the following issues
    1)Check the status of the other GL accounts field status for business areas.
    2)Check if there is any validation for GL accounts which can be given without business area.
    Hope this helps.
    Regards

  • Field Status Group influence when Purchase Requisition being created

    Hi!
    I have a requirement from a client regarding the influence of the Field Status Group on Purchasing Documents.
    A Filed Status Group has been created in which has the CO/PP order set as Required entry for the Account Assignment.
    This Group was then assigned to a GL Account.
    When a Goods Receipt (MIGO) against a Purchase Order is entered for a GL which requires an Internal Order, the standard error message "Field Order is a required field for G/L account 0010 4105000100 " (message # F5808) appears if the Account Assignment on the PO is incorrect & no Internal Order has been entered.
    This is fine & is how the system operates as standard.
    However, the requirement from my client is to make this error message appear when a Purchase Requisition is being entered on the system, before it is converted to a PO & then receipted.
    They believe that calling the message at the point of GR is too late in the process.
    Could anyone advise on any possible BAPI, etc which could help us with this requirement??
    Thanks,
    k

    I have gone to the Tcode which has been given,
    In the first field , I have given the company code,
    in the second field , I have given  call Plant (0002)
    Validation ......how do i give the validation please let me know
    With Regards,

  • Status group in Incompletion Log

    Dear Friends,
    In the status grp which we maintain in Incompletion procedure what does the "X" mark suggests?.....for example in status grp 02 both general and delivery are marked as X so it means without filling those particular fields both sales and delivery documents cannot b processed......this is what I interpret..correct me if am wrong.....Thanks in advance

    Dear S Kumar,
    Answer to your query is already given by SAP, in to Help-file, maintained with the functionality.
    SPRO --> IMG --> SD --> Basic Functions --> Log of Incomplete Items --> Define Status Group
    Here, instead of executing the function, click on to File-icon. The same description is pasted here:
    Define Status Groups
         In this IMG activity, you use status groups to define the status of
         incomplete sales and distribution documents. Then assign the status
         group to the fields in an incompleteness procedure.
         In the status group, you define which functions may be carried out for
         an incomplete sales and distribution document, or for the items where a
         field entry is missing. You use this function to block a document for
         delivery, billing, or pricing. In addition, you can check at header*
         level whether the general data is complete.
         Example
         Fields that are defined for deliveries do not also have to apply to the
         billing document. If you allocate the relevant status group to these
         fields in the incompleteness procedure, you can create a billing
         document for the incomplete sales order but not a delivery.
         Activities
         1.  Check to what extent you can use the defaults for status groups that
             are defined in the standard system.
         2.  Change the existing status groups according to your requirements.
             Create new groups, if necessary.
         3.  Afterwards specify status groups for fields in the incompleteness
             procedures (see section Define Incompleteness Procedures).
    I hope, this would answer your query. If not, Please explain.
    Best Regards,
    Amit

  • W-5 Filing Status field in Federal Iview for ESS?

    Hello Guru's
    I am looking into having the 'Earned Income Credit' filing status field from infotype 210 - subtype FED to be displayed on the W-4 iview in ESS. Can someone provide me direction on how I can do this? We are using ECC 6.0 with EP 7 (ESS BP 1.0).
    Thanks,
    Mike

    You will need to create a WebDynpro Project for the DC ess/us/w4 and make the necessary changes & deploy it to the Portal.. assuming you have your NWDI & Dev Studio set up already.. evidently, you will need some Java expertise..
    ~Suresh
    P.S: if you think it is too much.. wait for others to pitch in with an easy solution

  • Table for filed status

    Hi
    what is the table for field status. I want to down load data for all the company code field sttus setting in the client. In which table i can get all the fields setting for the field status.
    CHEERS

    Hello,
    Your question is not clear.
    There are number of field statuses in company codes.
    You can see the field status groups details in table T004F
    If you can elaborate your requirement, I can give you more details.
    Regards,
    Ravi

  • Remove  Invalid Filing Statuses from Portal for Puerto Rico W-4 (IT210)

    Hi Experts,
    I need to remove Invalid Filing Statuses from Portal for Puerto Rico W-4 , can any one advise , checked in T5UTK can we do changes in this table?
    Thanks
    Sri

    Hi Obulu;
        Yes you have to customize that table, please refer to note 1500596 "New Puerto Rico Marital Status".  If you want additional info about the changes in PR I wrote a blog about it Withholding changes in Puerto Rico
    Hope that helps!
    Best regards,
    Federico.

  • Difference between field staus group for posting key and GL account

    Hi all,
    can anyone tell me what is the difference of usage for field status group in posting key and GL account as i notice the fileds are the same. during data entry, system will check both field status or how?
    thanks.

    Hi
    Both are to control the field status of the line item.
    But, the FSG of the Posting Key and the GL FSG status should not clash like below.
    Take 'Assignment' field as example :
    Posting key FS - Suppress & GL FS - Required    - will give you error message at the time of posting
    Posting key FS - Required & GL FS - Suppress    - will give you error message at the time of posting
    Otherthan the above, all other combination works
    VVR

  • HR/ESS - HRXSS_PER_READ_P0210_US/IRSLI, W-4, Filing Status

    Two problems.
    1. HR configured IRS Mandates in SAP.  When an employee is IRS Mandates, a SAP field called IRSLI returns "X", else returned ""(empty).  ESS' web dynpro model is HRXSS_PER_P0210_US.  I guess one class under this model HRXSS_PER_READ_P0210_US would read in this IRSLI value.  In ESS Context, we have a node to catch this IRSLI.  When IRSLI equals "X", the employee's W4 will be displayed without EDIT button.  That means IRS Mandates employee can not modify W4. 
    In QA, after the above change is made, ESS works fine, and EDIT button is hidden for IRS Mandates employee.  In NW Developer Studio, Debugger shows IRSLI="X". 
    In production infotype 161, HR successfully configured IRS Mandates.  In infotype 210, it clearly shows IRS Mandates checkbox is checked for the employee.  But in production ESS, the IRS Mandates employee can still see the EDIT button in W4.  I cannot debug directly in production, but I added a print command into the web dynpro program.  The print command shows IRSLI="" in ESS. 
    The version of ESS in QA and production are the same.  I have repeatedly deployed them and set some print commands to make sure they are current.  ESS relies on the SAP field IRSLI returned from the model HRXSS_PER_P0210_US.  But in QA, it seems SAP backend (QSS) can return IRSLI="X", but in production (PSS), it returns IRSLI="".  Our SAP analyst checked on SAP side, and all configuration is fine.  We tried to run a testing with HRXSS* program in SAP backend, but this program is hard to run because it needs a lot of inputs and settings.
    My question is: is this a backend problem or front end problem?
    As a web dynpro developer, I usually modify web dynpro programs in NW Developer Studio, then test them in QA in SAP portal (backend is QSS).  After everything is good in QA, I deploy them to production.  In this case, when I test it in QA, everything is fine.  After deployment to production, it is NOT good.  Very strange.  I will appreciate any advice.
    System info:
    ESS version 600 SP13.  Back end is ECC 6.0.  JDK 1.4.2_13.  SAP portal 7.0. ESS is in SAP portal.
    Edited by: Y. Liang on May 27, 2009 5:34 PM
    Edited by: Y. Liang on May 27, 2009 5:40 PM

    Sorry, I posted problem #2 here.  When I posted it with problem #1 above, all new-lines disappeared and made it hard to read.
    2. This is another problem in ESS W4.  Filing status dropdown has options such as married, single, head of household, etc.  Our HR decided to remove head of household from the dropdown.  SAP analyst configured the backend, and I did not do anything on web dynpro side.  After the configuration is done in QSS, I logged on ESS in QA (sap portal).  I could see head of household disappeared from the dropdown.  This meant everything is a success and it is good to go to production. 
    The SAP analyst transported his configuration from QSS into production (PSS).  But, when I logged on ESS in production, the head of household showed up in the dropdown! 
    I did not do anything on web dynpro side.  I did not have any transport.  It was a configure on SAP backend, and the analyst had transported it.  I do not even know what the analyst did.  Why it was working in QA (QSS) , but not production (PSS)?  Is this a web dynpro front end problem or a backend problem?
    Our QSS and PSS are the same in data, configuration and programs.  While QSS and PSS are working differently, I am worried and doubting if they are really the same.
    I will appreciate your help.
    Thank you in advance.

  • Report availability status (Group) in Em12c

    help me please query for availability status (group) in EM12c,
    i want show availability status all instance in one group, example i have dba group and my instance is : rodex, downhill, rundown
    Instance_name      |    Avaibility Status (%)
    rodex                         99%
    downhill                      98%
    rundown                     100%
    anyone have query for this ?

    2. You can create group with 3 DB Instances as it members.
        The Group homepage would display the availability of all three instances
         Create group following Section "Creating and Editing Groups"  in Managing Groups .

  • Open Item Clearing Differences - Tolerence Groups for specific GL Acctts

    Dear Forum,
    We have a situation where we need to set up different Tolerance Groups for Clearing Differences for different GL Accounts, such as for GL Account for GRIR Clearing Account, we do not want any clearing differences and therefore the tolerance limit should be zero. But for Clearing of other GL Account we intend to set up the tolerance limit, say, upto maximum of USD 1000. The issue is that we can define the Tolerance Groups for Employees under OBA4. However we are not able to restrict this Tolerance Group, with a maximum limit of USD 1000 for Clearing Differences, to a particular GL Account. How can we do this? There is a risk that this Tolerance Group Employee may perform the Clearing of the GL Account for which we want to have zero tolerance.
    The suggestions and ideas from experts will be highly appreciated as we intend to resolve this issue.
    Regards

    Hi,
    You can define tolerance group for GL account in transaction code OBA0.
    T-code (oba0)
    (This is to be done before Clearing the GL open Transactions)
    Define Tolerance Group for GL Account
    Financial Accounting
    GL Accounting
      Business Transactions
       Open Item Clearing
        Clearing Differences
         Define tolerance for GL Accounts
    GL tolerance group should be assigned in GL master data using transaction code FS00.
    GL account master data > Company code segment > Control Data > Tolerance group.
    If you donu2019t find this field in GL master data then you have review field status of GL account group in IMG.
    Thanks!
    Raju
    Edited by: M V Narayana Raju on Sep 17, 2010 2:36 PM

  • Problem creating cache group for a table with data type varchar2(1800 CHAR)

    Hi,
    I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error.
    5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted
    5168: Restricted cache groups are deprecated
    5126: A system managed cache group cannot contain non-standard column type mapping
    The command failed.
    One of my filed type in oracle table is Varchar2(1800 CHAR). If I change the filed size to <=1000 it (E.g. Varchar2(1000 CHAR)) then the Create Cache command works fine.
    MyDatabase Character Set is UTF8.
    Is it possible to solve without changing the filed size in the Oracle Table?
    Request your help on this.
    Thanks,
    Sunil

    Hi Chris.
    The TimesTen server and the Oracle Client is installed on a 32-bit system.
    1. ttVersion
    TimesTen Release 7.0.5.0.0 (32 bit Linux/x86) (timesten122:17000) 2008-04-04T00:09:04Z
    Instance admin: root
    Instance home directory: /appl/TimesTen/timesten122
    Daemon home directory: /var/TimesTen/timesten122
    Access control enabled.
    2. Oracle DB details
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE 10.2.0.3.0 Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Oracle Client - Oracle Client 10.2.0.4 running in a 32 bit Linux/x86
    3. ODBC Details
    Driver=/appl/TimesTen/timesten122/lib/libtten.so
    DataStore=/var/TimesTen/data
    PermSize=1700
    TempSize=244
    PassThrough=2
    UID=testuser
    OracleId=oraclenetservice
    OraclePwd=testpwd
    DatabaseCharacterSet=UTF8
    Thanks,
    Sunil

Maybe you are looking for