FILEIO message sequence counter reset after domain restart

Hi,
I have configured FileIO to pick message from RIB-RMS topic and create xml message. It is working fine.
These xml message are pick by external system based on their sequence number in file name itself. like File name 'Items_ItemCre_100069945.775' having message number 775.
After Domain bounce, counter is reset to 0, causing the duplicate message error as message is identified by its sequence number.
Please let me know how can we avoid resetting the message counter?
Thanks & Reagrds,
Vinay

Hi,
Are the results from a same computer? (Run manually and ran that as required)
Please make sure the instance of 'Win32_EncryptableVolume' exists on that drive. 
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Notifications setting always reset after I restart. can't keep the setting i changes

    after upgrade to osX 10.10. the notifications setting can not save what i change.
    always reset the setting after I restart yosemite.
    how to fix it?

    Seems to be a problem among many users.
    https://discussions.apple.com/thread/6605975
    https://discussions.apple.com/message/26851563#26851563
    https://discussions.apple.com/message/26857242#26857242
    https://discussions.apple.com/message/26863504#26863504

  • All of my settings reset after I restart my iMac.

    I've been having this problem for a little over a month now, I've spent countless hours researching, and every possible solution that I've come across hasn't worked for me. I've reset my PRAM, I've repaired my disk and permissions multiple times, even by using the Disk Utility on my Recovery Partition. 
    Basically, about two months ago I (regretfully) changed my account shortname by going to System Preferences>Users & Groups, right clicking on my account and changing the shortname in the advanced options.  Everything was fine, but now when I restart my iMac, my desktop wallpaper changes back to what it was on the day I changed my shortname, any apps that I add to my dock are removed after i restart, Safari opens up the guide that I was using to show me how to change the shortname, the "Users & groups" window even appears as soon as I log in to my account. Basically, my iMac seems to be booting back to the day I changed the shortname, now any changes I make aren't saved.
    Everything keeps restting back to the way it was on the day that I changed my shortname.  Since then, I've changed the shortname BACK to what it was the first time, hoping that would fix the issue. 
    Also, I'm not sure if this is normal, but if I go to "~/Library/Preferences/com.apple.desktop.plist", and check the permissions, "everyone" is on there twice:
    It also does this for every other .plist file in my preferences folder. 

    You just can't change it all, not even back, which just doubles the problem.
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

  • My iPhone 5s states my voicemail is full and I have erased all messages.  I reset it and restarted several times.

    How do I get my voicemail to state it is not full?  I have no messages and have restarted it and reset it several times.

        jl61,
    Hmm thanks for doing those steps for us. When you stated that you have done the reset on the phone, did you do a full factory reset or Rest Network Settings:http://vz.to/1gB9rgc I would also suggest that we try to remove the sim card from the device. You can complete that step by looking at this link for the steps: http://vz.to/1bb5oDU Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport 

  • Message List Font Wierd After Freeze Restart

    My Mac froze up and needed to be restarted. After it started up again, my message list in Mail has zero space between the lines whereas before, they were spaced. They looked scrunched now. Can't figure out what is wrong as the font settings in the preferences are as they should be.

    justjotamac,
    Can't figure out what is wrong as the font settings in the preferences are as they should be.
    Do you have any duplicate fonts?
    ;~)

  • Cache server reset after server restart

    Dear gurus,
    I have this kind of problem.
    Sap cache server reset itself after a server reboot, doesn't retain preloaded files. datafile are correct (3 datafiles) and CacheSizeMB e MaxCacheSize are configured in CSProxyCache.ini (85% of available space).
    Do you have any suggestion?
    kind regards

    Just adding, we use this services:
    pub.client.ftp:get
    pub.client.ftp:login

  • Counter reseting after particular number is reached

    Hi,
    I need a counter which will count from 1 to 20. It should reset at 20 and again start from 1 again. Can any one help me in this.
    Also I need how to interface the labview simulation with real time clock. I mean span of 1 iteration in my simulation should be 1 second.
    Thanks.

    Bob_Schor wrote:
    The Remainder function is your friend, as is the Feedback node.
    In a normal application, use the Quotient & Remainder.  It is the easiest code to understand.  When going to FPGA, do the normal comparison and a Select function.  The Q&R is really expensive in an FPGA.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Wireless needs to be reset after every restart

    Hi all,
    I'm running 10.2.8, and use a Lucent waveLAN/ieee card with the Sourceforge drivers (WirelessDriverBeta5); they do a good job of connecting me to my wireless network. My one complaint is that every time I restart my Powerbook and want to go online I have to open the wirelessconfig utility in System Preferences and re-enter the setting (hex key, channel, etc.). Does anybody know if this is normal behavior for this card/driver set under Jaguar, or am I missing some silly little thing?

    Anybody out there familiar with the Sourceforge wireless card drivers? Maybe a link to a previous discussion I overlooked?

  • Desktop reseting after restart

    My desktop keeps on reseting after it restarts and my files i save on my computer keeps on scrambling and not being able to read it or open it. Any suggestions on how to fix this....beyond reloading my OS and everything on my computer?

    It is already set to none as I'd like to put the folders where I want. But still, after restart the imac puts them all on the right side of the desktop. I'm getting tired to put them back where I want and the imac puts them back to the right

  • My BlackBerry z10 delete after every restart

    After I installed os 10.3.1.1865 into my blackberry z10 stl-3, it's resets after every  restart or the battery drains, all my apps, settings, documents will be done...
    please what can i do?

    Hi @man605 
    Can you confirm that running this tool produces The fix is not applicable to this device?
    Assuming that's the case, if possible can you please reproduce this issue can capture two sets of logs for me?
    To do this complete the steps below.
    Log Set #1 - Before restarting
    Restart your device
    Within 5 minutes of restarting, create a new document using Docs to Go 
    Open the Help app
    Swipe down from the top of the screen, tap Create Report 
    Tap Save Log Snapshot 
    If prompted to upload logs, tap No
    Log Set #2 - After restarting
    Restart your device
    Within 5 minutes of restarting, verify the file created using Docs to Go was removed
    Open the Help app
    Swipe down from the top of the screen, tap Create Report 
    Tap Save Log Snapshot 
    If prompted to upload logs, tap No
    After completing these steps, open File Manager and browse to documents\logs.
    Within two files will appear along the lines of bbswltlog<date>.zip. Tap and hold each file followed by tapping Share
    Select your email address and send the log files to supportforums[at]blackberry.com with the subject Attn Ty; Logs from man605
    When you send your email, please include your device PIN as well. Thanks!
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • Can't login to Mac Pro after every restart

    Hi all,
    For 5 days I've not been able to log into my computer at work after its been restarted/gone to sleep. The IT guys have had to do all kinds of stuff to get it working again. And every time we think it's fixed, I've come in the next morning and have the same problem, can't login.
    I've eliminated that its my login details as I was able to login on another machine just fine. And others can't login  to my computer, so it's obviously an issue with my machine/OS.
    Does anyone have any ideas of why this would keep happening? It's as if something keeps resetting after each restart that then won't allow anyone else to login. This is all I can think of, but honestly have no idea. Any suggestions or help would be greatly appreciated as its really frustrating and putting me very behind on my work. Thank you!
    Btw, it's a Mac Pro duel quad core, 16GB ram, OS 10.6.7 I believe.
    Also, the admin and root can login, just not any other accounts. So the computer can be accessed, but not thru my or any other accounts on the network.

    Hey there.
    Well, I figured out what is causing my problem. It's Mobile accounts. I started fresh with a new install and a standard Active Directory account (not Mobile). I authenticated 20+ times. Rebooted at least 10 times. Everything worked great. Then I decided to create the Mobile account. That's when everything broke again. My Active Directory account was getting locked after one accurate attempt to authenticate. When IT unlocked it I could go one step further but then would lock me out the next time I tried to authenticate. I've replicated this twice.
    So for me, it's clearly a Mobile account problem. Which is bad because half of the Macs under my care are notebooks.
    Please let me know what you find out on your end.
    Thanks,
    Adam

  • My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

    The same story. No 3G after updating to 6.1.  Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

  • I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

    I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • JMS Messages lost after server restart

    Hi All,
    We have an environment where Oracle SOA 11g is configured to use Weblogic JMS (Database persistence). The JDBC stores have been created to hold the persistent JMS messages. However we have observed that after server restart the messages are getting lost from the queue (non consumed messages as well).
    Is there any configuration which we are missing?
    Regards
    Subhankar

    Hello Subhankar,
    Which Weblogic version are you using? What are the configuration parameters of the JMS queue you defined? During server shutdown/restart, do you see any errors in the server log?
    I would suggest you to raise a case with support as it may require an inspection of your environment and settings to find out the root cause.
    Regards,
    Anuj

  • Launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on re

    launching LR4 after a restart gives the error message "Lightroom encountered an error reading from its preview cache and needs to close" no fix on restart

    Delete your preview cache, it is a folder whose name ends with Previews.LRDATA

Maybe you are looking for