FileMaker Pro icons not displaying correctly

After updating to Yosemite, all of my FileMaker Pro document icons are displayed as generic icons (juts the outline of a piece of paper). This occurs both in Finder and on the Dock.
Other document icons seem okay. If I do a Get Info on a document, the icon seems okay in the Get Info window.
Does anyone know how to correct this behavior?
Thanks!

Thanks, coreworksnet.
I was also seeing this problem with FM 13. I was able to get around it, but it was a headache. I had to go into each individual DB file and do a Get Info. That dialog shows the icon for the document (which, strangely enough, showed the correct icon). I then copied the icon over from the FM app (which visually did nothing). But once I closed the Get Info dialog, the icon for the DB file was correct.
Repeat a few dozen times for all of my DB files, and it seems okay now.

Similar Messages

Indesign CS3 .indd icons not displaying correctly in Windows 7 64 bit.

GDay InDesign Gurus.
Ive just recently moved over to Windows 7 64 bit and have noticed that my InDesign .indd file icons are being displayed as a blank file type instead of the IND icon type. The .indd files open up correctly in InDesign upon double clicking so the issue is more of a convenience one. I have checked that the file association has been set to InDesign which is all ok as the files open up fine just there is no IND icon displayed in the file; my Photoshop and Illustrator files are all fine and display correctly but it would be nice if I could easily see my .indd files.
Ive searched the web for a solution but have not been able to fine one associated to Windows 7 64 bit.
Any help you guys can provide would be highly appreciated.
Thanks guys.
Regards Stuart K

http://forums.adobe.com/message/1319918#1319918
Bob

Website Icons not displaying Correctly on FF8.0

Dear Support,
After upgrading to the latest FF8.0, I noticed that some of the bookmarked websites in my bookmark toolbar don't display their icons correctly.
for e.g.: I have Cisco.com at bookmark toolbar. Instead of displaying Cisco's logo next to the website name, I'm getting an empty dashed square.
Kindly advise
Regards
Michel

The MOST common cause of sites not displaying properly in any browser is the invalid code on the page -
[Invalid] Markup Validation of http://selfhelplegalonline.com/ - W3C Markup Validator
See if you can fix those validation errors or post back here for help.

Icons Not displaying correctly in Bridge 6

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Also some image icon as above shows just the first layer, not added layers. I open the image in cs6 and it is correct. The correct image is saved and working; but the icon does not show the correct image.
Of 30 images I have worked on over the weekend there are only two in the folder that do not show correctly. The files are not bigger/smaller than the correct ones and all of them are psd. Any ideas? Thanks, Bob

in bridge 6. Image Icons in layered psd images do not show changes I have made – for example added or deleted layers.
Assuming with Image icons you mean the thumbnails in the content panel and that you are using Bridge CS 6 (which has Bridge version 5)?
The short route to check is selecting one one the problem thumbnails and with right mouse click from the menu choose 'purge cache for selection'.
If this works then go to the menu tools / cache / purge cache for folder and you should be OK.
If not you have to provide more details about computer specs, OS version and exact Bridge version

Icons not displaying correctly getting text instead.

I have tried all options that I have found on your forum with no luck. I went as far as resting my Firefox to default with no success.
Using MAC 10.8.5
My setting are set up correct - Allow pages to choose their own fonts, instead of my selections above is checked.
I also rest this as well
gfx.downloadable_fonts.enabled
So far no luck I am still getting text instead of the icons.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB

Brush icon not displaying correctly

Hi folks,
I just installed CS4 on a lovely new Dell notebook with WUXGA display (1920x1200) and am having a problem that I have never seen before. When the brush tip is small (up to 35 px at 100%) I see the entire circle defining it, but as I move into larger and larger tip sizes the circle starts to disappear from the bottom right, becoming just a smaller and smaller circular fragment until it disappears entirely at around 300 px. If I select the center crosshair, this also disappears around 200px (when only a small circular crescent is left), and then reappears at around 400px (minus any trace of the circle).
It is obviously some sort of display issue: if I change the image size the behavior is the same when the circle is the same size onscreen, so it is the display size and not the absolute pixel size which determines it. This happens whether I choose normal or full-size tip.
Has anyone experienced this? It is not only annoying, it is positively serious, since at certain sizes I cannot even tell where or how large the brush is.
Clear type on or off makes no difference. I have not noticed any odd display behavior with any other program.
Any suggestions most welcome.
Toby

This was a very common fault in the early days of CS4.
You need to update to Version 11.0.1 and get the latest video drivers.
You might have to experiment with OpenGL settings in the preferences too.

Mac Pro Screen not displaying correctly

I have had a problem with my mac which is i have recently bought. The problem is that occasionally the screen will become fragmented and be all over the place and i am unable to see anything and i have to restart the laptop. This happens at least twice a day and can happen when i shut the lid of the mac or i am on it. Another problem that i have is that a message often pops up stating that my mac has to restart and i'm not really sure why. If anyone else has this problem and has sorted it out please let me know.

Your warranty includes 90 days of phone support. Call AppleCare, or make a "Genius" appointment at an Apple Store to have the machine tested. Back up all data before you go.

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Search box not displaying correctly in Safari

How can the search bar on the Apple site not display correctly in Safari? I find this odd that Apple would allow this. It displays like 2 search boxes overlapping each other. It still functions correctly but it is a little embarrassing since I am always bashing windows pro browser display.

Hi
Welcome to Apple Discussions
Might be a corrupted cache or cookies issue. First, go to Safari Preferences>Security>Show Cookies. Type Apple in the Spotlight panel. Highlight/remove the cookies. Then, go to the Safari Menu>Empty Cache. Try the Apple site.
If the double search panel still appears, go to the Finder: Your User Account>Library>Caches. There, move to the trash the com.apple.safari file. Restart Safari and try the Apple site again.
Post back

Links do not display correctly in my pdf

www and http are not displaying in pdf files converted from MS Word
When I convert a Word document to pdf using Acrobat Pro 9.0, the website addresses do not display correctly. For instance, if my document shows www.website.com - then the pdf only displays .website.com. Also, if I have the http://www.website.com - I get ://www.website.com. Please HELP! I remember having this problem when I used the trial version of Acrobat 9.0, at the time, I just removed the link & the document converted fine. For this file, I REALLY need the links to be active.
For now, I have resorted to using a pdfmaker that costs about $5 on e-bay. It works just fine - why doesn't my Adobe Acrobat work?

PDF maker is the part of AA9 Pro that converts the links for you. You did not say how you are creating the PDFs, but you have to use PDF Maker (the create PDF button in WORD) to get the links correct, or add them manually in Acrobat.
I have no idea what PDF Maker you are talking about for $5 a day, since it is part of your package and is thus no additional cost. If you are printing to the Adobe PDF printer, you are not using PDF Maker.

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

PDF's in Mail and Preview not displaying correctly

Ever since upgrading to Yosemite PDF's are not displaying correctly. Every time i generate a PDF of a sales quote it seems to lose a lot of information.
But the strange thing is.....
Preview and Mail both show PDF with missing text.
When I open using "Quick Look Attachment" within Mail or Adobe Acrobat it looks perfect.
When emailed, recipients (mostly Windows users) seem to have no problem opening it and seeing all text.
So far seen that issue is only in Preview and Mail
Only has happened since upgrading to Yosemite
PDF is created using web based ZOHO CRM to build quotes.
See image below to see the difference in what Mail and Preview sees compared with how other apps open the same PDF.
NOTE: sensitive info has been purposely blurred on image.

Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Yosemite
Safe Mode - About

Aligned Form Fields Do Not Display Correctly Where Visible Borders Overlap?

I'm on creating some forms & checklists for the company I work for to simplify our project workflow. When adding text fields to the form I'd like to add borders to segregate the various fields & make the form more presentable.
The problem I'm having, is that I'm unable to place fields immediately adjacent one another without leaving a gap. If I do & use the snap to grid option, aligning the top of one field with bottom of another, it does not display correctly when printed. The border lines appear to have differing thicknesses where they touch & this makes the form look terrible. Currently I'm having to create the borders in an excel spreadsheet, convert to pdf & add borderless fields within the pre printed borders. While this gives me the look i want, if I later want to add to or amend the form I have to start from scratch first modifying the initial excel layout which is too time consuming. I'm using Acrobat X Pro. Any assistance appreciated.
Regards
John

There are at least two techniques to allow you to change the underlying layout and remake the static part of the PDF, without having to redo the form fields (except new ones, and moving as needed).
That is replace pages and copy-paste of form fields.

Mc-icons not sized correctly in Internet Explorer

The file icons used by Sun One Web Server 6.1 (/mc-icons) to indicate file types do not display correctly when a directory does not have an index or default file, and the web server automatically creates an index that includes these icons and shows the directory contents. The icons representing the files appear correctly sized in Netscape Navigator 4.7 browser, but appear to shrink beyond visible resolution in Internet Explorere 6.0 browser. Fancy indexing (common) is being used. Platform is Windows 2000 Server, also running SSL3 and ColdFusion 7.0. How can we get the icons to display at a visible size in Internet Explorer? The result appears to the user as if the icon graphics are missing, but they are indeed called correctly by the page and the path to them is set correctly. I have verified that the graphics are OK on the server and are sized correctly when viewed in an image editor.

Are you sure the problem is the size of the icons? Beginning with version 6.0.2900.2190, Microsoft Internet Explorer stopped displaying the Web Server /mc-icons GIFs. This regression was apparently a side effect of Microsoft's attempts to fix IE's handling of malicious image files.
Apart from not using the buggy versions of IE, I'm not aware of a simple fix. I suspect a future Web Server 6.1 service pack will include a work around for the IE bug, but probably not until 6.1SP7.
I've added tweaked icons to my blog at http://blogs.sun.com/elving?entry=directory_listing_icons_and_ie that IE will display properly. You may wish to copy these into your ns-icons directory.

Google fonts not displaying correctly since updating to Firefox 31.0

Since updating to Firefox 31.0, the vast majority of Google / web fonts are not displaying correctly, including icons that are being replaced with random characters. When I view the Google web fonts page, only a few display correctly, the rest just default to a sans-serif font.
- I've tried running in safe mode with no add-ons enabled.
- I've tried disabling all add-ons then re-enabling one by one.
- I've checked the tickbox in the font settings for 'Allow pages to use their own fonts' is ticked
Any help appreciated, it's got quite frustrating now.
Thanks, Greg

You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1
You can try different default fonts and temporarily disable website fonts to test the selected default font.
*Tools > Options > Content : Fonts & Colors > Advanced
*[ ] "Allow pages to choose their own fonts, instead of my selections above"
You can check for problems with preferences.
You can check the <b>gfx.downloadable_fonts.enabled</b> pref on the <b>about:config</b> page and make sure that it is set to true (if necessary double-click the line to toggle its value).
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

FileMaker Pro icons not displaying correctly

Similar Messages

Maybe you are looking for