Filename distribution error

every time I try and distribution the form is get an error "The filename you specified is not valid". I store it directly to the c: drive with the name test.pdf it stills gives the same error message. I am using acrobat X Pro

Thanks for your reply, but there's no bundle with
what I downloaded. All I have is the 'sjsas_pe-8_2-linux' bin file.
I read the documentation on the sun.com web site, under the
'install on linux' section, but all I get is the above installation directions.
I don't know if this helps but I'm using the opensuse 11.0
as my platform.
Edited by: asteway on Mar 26, 2009 12:01 AM

Similar Messages

Unable to create "filename.dmg" (error -60008) {Disk Utility Problem}

Hi:
I’ve used Disk Utilities awesome capabilities many times, but am now running into my first real problem.
I am trying to create a 100 GB new blank disk image, using the “Mac OS Extended (Journaled) option for format, 256-bit AES encryption, a single partition-Apple Partition Map, and Image Format as read/write disk image.
When I implement this, it asks for the AES password then repeatedly crashes, albeit in slightly different ways each time. The most informative was a Unable to create “filename.dmg” (error -60008) message. I can’t find anything explanatory about this in Google
I’m wondering if this has something to do with my upgrade to Lion (OS 10.7.4) yesterday from Snow Leopard.
This error occurs on both my home and work iMacs. It seems to reliably occur about 1/2 way through typing in my password. The error occurs whether I use 128 or 256 AES encryption.
There is more than adequate space on the hard drive I am attempting to place this image on. Disk Utility is version 12.1.1 (353) and all is running on a 2.66 GHz Intel Core i5 iMac.
Any advice would be greatly appreciated! Thank you
PS: This is a duplicate post from the OS Lion forums ( https://discussions.apple.com/message/18410534#18410534 ), but since a) it occurs on both my Intel iMacs, b) I totally rely on Disk Utility's capabilities, so this loss with the Lion upgrade really hurts, and c) we've had no luck in the Lion forums, we're hoping someone here has seen this issue and can help. Much appreciated.

Hello, I believe that's an authentication error, thinks your not an admin account. Might try this...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, move this folder to the Desktop for now...
/Users/YourUserName/Library/Preferences/ByHost /
reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Incorrect distribution -Error while distributing GOA to R3 Backend system

Hi,
We have installed SRM server 5.5 and implementing contract Management
scenario with backend system R/3 4.6B.
In this scenario we are creating a Global Outline Agreement in SRM
system and distributing it to the back-end ERP system.
In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
are failing to distribute to R/3 system v4.6b
We are getting this error message in SRM transaction SLG1: -
The error ocurred by processing event RELEASED_NEWLY with GUID
DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
NOT FOUND"
The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
The condition types are mapped in SRM
Pls suggest.
Regards,
Avinash

Hi Avinash,
In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
By using the BADI you can define which document to be created in the backend.
BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
Check for the transaction types (GCTR) and the number ranges for the transaction types.
The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
Also refer the below SDN thread in this regard :
Re: Scheduling Agreement from GOA
Any further clarifications are welcome.
Award points for suitable answers.
Rgds,
Teja

STMS_QA distribution error

Hello,
We are facing an error with our Transsport system. The TR's are not showing up in the buffer list of our production system.
There were 6 TR to be imported in the production system. But before it gets into production, it has to have the approval in the quality systems. After having given the approval, only 3 TR's were showing up in the import buffer of the production.
The other three are facing a distribution error.
"User KANDIKON has no authorization for the tp command"
User KANDIKON has no authorization for the tp command SETACTIVE
Message no. TP607
Diagnosis
To execute the tp command SETACTIVE you need the administration authorization S_CTS_ADMIN in the Change and Transport System. It can be found in the authorization profile S_A.SYSTEM.
System Response
The function terminates.
Procedure
Contact your system administrator.
For more information on authorizations and authorization profile, see the online documentation on the CTS. "
The concern is how come for other TR there were no issues when the approver was the same.
Please suggest as to how to proceed further.
Thanks and Regards,
Ankit Mishra

You should check whether that user has authorization for the object.
S_CTS_Admin is needed if you want to do STMS activity.
Regards,

ALE distribution error - 0 communication IDOC

Hello,
We are getting 0 communication IDOC generated for message type DOCMAS error for ALE document distribution error. Please advice where to look for the error.
Anirudh

hi,
ani,
u check this,
If you want work items to be created when errors occur for the purpose of error handling, you need to assign the standard task TS40007915 PCROLL to a position or a workflow organizational unit.
Or
You can also distribute dependent objects manually for classes. You can use report program RCCLDIHI to distribute a complete class hierarchy including all classes characteristics, and characteristic values.
Only the message code (004 - change) is allowed for sending a document (message type DOCMAS). This function also creates the document in the target system.
You can control the sending of documents with the indicator Distribution lock. An object with this indicator in its status will not be distributed into other ALE systems.
You can set the indicator in Customizing Document Management System  Define document type  Define status. The distribution lock is read when a distribution automatically starts after a change pointer is set or for an Integrated Distributed PDM Solution (ID PDM).
You can ignore this setting by starting the distribution manually. When you set the indicator Ignore distribution lock in the initial screen, then all documents will be distributed overriding the previously set status.
You control the distribution of object links with the indicator You cannot maintain the object links via ALE and Object link unchanged in target system.
Information about object links are distributed through IDoc type DOLMAS01.
The data is transferred to the workstation application and to storage data in IDoc type DOCMAS04 if an original file exists to a document. The Remote Function Call interface protocol transfers the contents of the original file, for example text or design drawing.
You can determine whether you want originals of a certain document type to be distributed by ALE into another system under the setting Document Management System  Define document type  Define transport of originals for ALE. You can control distribution with various criteria.
You want to distribute all original files of the application WRD (Microsoft Word) for the document type R-1 (report) that are stored in vault VAULT1 (Vault for Office Applications). You do not want to distribute documents of the same document type for the application WWI (Winword 6.0).
You can process the status for the desired objects.
1. Select in Customizing Cross Applications Components  Distribution (ALE)  Standard ALE Business Processes  Logistics  Master Data Distribution  Integrated Distributed PDM Solution (ID PDM)  Object status (for example, Define BOM status).
2. Process the indicator Distribution lock
ben

Need to get distribution errors in SAP Inbox

Hi Experts,
Please guide me where we can configure to get distribution errors to SAP Inbox of particular mail id.Thanks for your help.
Regards,
Siva

Hi. Have you checked IMG Path?:
EHS -> Product Safety -> Report Shipping -> Basic Settings -> Assign Recipient for Error Handling

FI-GL allocation - distribution error: no valid receiver entries exist

When creating an allocation cycle with fixed percentages and distribution defined on own Z-field (exists in table T800D without
checks) we get Message no. GA109 when going to the receiver tracing factor screen.
This happens only when entering a range or set for the receiver. With one unique value we get the tracing factor screen.
This worked before with ranges and sets. As far as we know there are no changes done at the configuration.
What can trigger this error? Something must be changed, but I have no clue what...
Can you give me some tips to help me searching?

Hi Prasada,
I can change the set I use, so I guess it is not locked ?
The set consists of 18 single values, from 1 to 18. So I tried with a set with a range 1 to 18, and also without a set and just a range 1 to 18 but that didn't help.
When I use only 1 value I dont get the error.
Before we did some tests with the same cycle (same segments and sets) and we didn't had the problem.
We have the problem now for more than a week.
Any other suggestions?
Renaat.
UPDATE FYI: we had to activate valdiation on the fields used for the allocation
Strange because we did tests in the sandbox before without these validation on.
Edited by: Renaat Vanhaverbeke on Nov 6, 2009 10:17 AM

LV 8.0 Installation For Distribution Error: Required NIPathsDir property MOZILLADIR undefined

I have built an application LV 8.0 and I am not trying to prepare a distribution package.
I have created a LabView Project (.lvproj) and I have created an Application in Build Specifications. That works just fine. I can generate a proper .exe with associated files.
I have then created an Installer in Build Specifications. This appears to work, and it generates installation files.
However, when I try to run my new Install, I get the following error:
Fatal Error!! Required NIPathsDir property MOZILLADIR is undefined
There is nothing on my machine (or the other machine on which I tried this) referencing MOZILLA or anything to do with MOZILLA.
NOTE: I have previously created Applications and Installers in the Build Specifications for other LabView Projects with no problems at all.
Thanks in advance for any help.

Same problem with LabVIEW 8.5.1 and Win'XP SP3.
Message Edited by Joe Gerhardstein on 06-05-2008 08:12 AM
Joe Gerhardstein
Averna Test Systems
Certified LabVIEW Architect
http://www.averna.com
Attachments:
nidirpaths.gif ‏2 KB

Project View does not show the Path and Filename when errors occur

I have the problem, that errors occur in the project but in the colum that shows the "Resource" I can only see the "Project Name". Normally it should show the filename. The "Path Column" is completely empty. The "Location column" shows the correct line number in the file (but unfortunately I have no Idea which file). Double clicking on the row does not do anything.
I'm sure it had worked, but no idea since when this problem occurs. I am using Flash Builder 4.7.

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Software distribution error with LMS 3.2 regarding flash/memory size

Hello,
I'm accustomed to LMS raising warnings about memory size not being enough when in fact there is enough space (eg : there is 256mb, IOS requires 256mb, but LMS calculates 255.234mb, and says there is not enough memory). I've encoutered that situation many times with LMS 3.1 and just learned to ignore it.
But since I've upgraded to LMS 3.2, we are now getting _errors_ which are preventing us from deploying the IOS, even though there is still enough memory and flash space. I've read in another thread about bug CSCsu49349 but this one should be fixed in LMS 3.2, so I am at lost.
I always download my IOSes from Cisco.com using LMS so that the proper fields are populated.
Here is one sample : I was trying to deploy an IOS to a 2821 router. The IOS weighs 29Mb in reality and I have around 31Mb of free flash, and the whole flash is 64Mb, but I get a catastrophic error. Also note the contradictory warning about the memory size :
Warning - SWIM1065: Minimum RAM requirement of the selected image: 256 MB .
RAM available on the device ( 256 MB) May not be enough to activate the selected image.
Increase the RAM size for the device, select a different image for upgrading, or
specify the RAM size for the image by editing the attributes of the image stored in the software repository.
Warning - SWIM1070: Feature subset of the Active image could not be determined.
Catastrophic - SWIM1200:Selected Flash partition requires minimum (64 MB) to upgrade selected software/image.
Select a different Flash partition for upgrading the image.
Do I need to modify the flash requirement on the image to get around this, or is there a patch available for LMS 3.2 ?
Thanks for the advice,
Alex.

Hello,
After running another inventory to make sure, I get the same error. Here are the steps of the distribution process (we can see I have enough room for the IOS, barely, but still enough) :
Afterwards I get the failed message :
And the same error message :
Thanks for the help!
Alex.

Acrobat Form Distribution Error

I am using Acrobat Pro 9.4.3. I'm trying to distribute forms so I can track responses. I'm using the option to have the replies come to my email inbox because not all recipients are behind the firewall. The distribution is using the default .FDF response format. Forms work okay until I get the response. When I try to open the file I get the following error message: The file you are attempting to open contains comments or form data that are supposed to be placed on . This document cannot be found. It may have been moved, or deleted. Would you like to browse to attempt to locate this file?
I've tried browsing for and using the original file and the distributed file. Data shows up either way, but nothing makes it to the responses file. We recent received upgraded machines and all software was reloaded with default options. This feature worked fine before the upgrades, so I'm thinking it's something easy like reseting an option, but I don't know which one. Any help would be appreciated.

Is this in the wrong forum? The problem I am having is with Acrobat's Distribution feature.
Shawn Gallagher
Program Specialist, Records Management, OSS
[email protected]
202-70(7-5595)
>>> MichaelKazlow <[email protected]> 2/18/2010 9:49 PM >>>
Please repost in the Designer forum.

Distribution error

I am using the following distribution file:
<mail id="XQRSN" to="[email protected]" subject="report test">
<body srcType="file">
<include src="body.html"/>
</body>
<attach format="pdf" name="test.pdf" srcType="report">
<include src="report"/>
</attach>
</mail>
and calling it from the url line with &distribution=yes&destination=myfilename.xml
I get this error:
REP-34304: 9
Start of root element expected.
REP-34304: Distribution failed to complete, please review the distribution lists
Has anyone got any ideas ???

solution=
<destinations>
</destinations>
must wrap mail tag

Build distribution error - WINNT.H

When I go to build a distribution for my project I get an error for WINNT.H. It says:
    cviincludes.h - 20 errors
                  "WINNT.H"[523,10) syntax error; found 'indentifier' expecting ','.
In the WINNT.h it highlights a line    __inline ULONGLONG
Since this is my first project and the first time I've tried to create a distribution, I have no idea what to do next. If I go back in to my project, change build configuration back to debug, I can't build my project anymore. I get the same error as above. Any ideas?
Mike
Solved!
Go to Solution.

Hi Adam,
I did have a couple of includes before windows.h so I moved them and get the same error. Right now I've got:
#include <windows.h>
#include <utility.h>
#include <ansi_c.h>
#include <userint.h>
#include "toolbox.h"
#include <formatio.h>
#include "inifile.h"
#include <gpib.h>
//#include <analysis.h>
//#include "counter.h"
//#include <time.h>;
#include <cviauto.h>
#include <cvirte.h>
#include "Sirius_rev1.h"
#include "DatalogControl.h"
#include "SerNum.h"
#include "lotID.h"
#include "Switches.h"
#include "TestControl.h"
#include "SetupControl.h"
I'm not sure what some of these are like cviauto.h, userinit.h, toolbox.h, and utility.h. It seems like I can comment out some of them and my .c compiles but I always get them same error when doing the distribution build.
Mike

Filename lenght error when organising library

In Itunes 6 using ; Advanced / Collecting library content
itunes collects my previously recorded some +3000 songs.
Somewhere there is a song with a filename length that is to long. Itunes does not tell me what is the permitted max lenght. It does give the offending filename but replaces that message with an error message within 0.1 second so I cannot read it.
Any solution?
Thanks
Peter

Any help please...

Model view distribution error

Distribution of model view MATMODEL
Target system MATLOGR3
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS MATLOGR3 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Target system MATLOGXI
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS MATLOGXI SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
I am getting this error when i will distribute the moddel view,,...
in Ecc5.0
what i have do now

Hi,
Just chk if hv implemented all the following steps;-
Once the mapping is done then re-check the ALE settings.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Regards,
Ashwin M
Reward if useful

Filename distribution error

Similar Messages

Maybe you are looking for