Filename: LiveDrvPack_Patch.

Hello,
My name is Jonathan, I cannot play Half Life 2's Counter-Strike Source in 5. Surround sound mode. However, it does work in 2 speaker mode.
Here is a relavent document to my exact problem:
5. Sound Problems in Half-Life 2
Question
5. Sound Problems in Half-Life 2
Answer
A number of players have reported that they are unable to get sound output while playing HL2 if they select 5. speaker mode (and sometimes not in 4 speaker mode either).
They might get sound only out of the center channel.
Stereo (2-speaker) mode does work in all of these cases though.
(not working = no sound or sound only comes out of the center channel typically if 5. mode is selected).
Basic Functionality which should work:
Plug your 5,6,7,8 speakers directly into the card (analog only) and you should get surround with HL2.
Plug the digital output of your soundcard into your dolby digital receiver and you will only get stereo (dolby digital is not supported right now except with Soundstorm chips that have their own encoder).
So for example:
AC97 works with 5. Surround works.
AC97 with digital feed to Dolby Digital Recei'ver does NOT work.
SoundStorm with feed to Dolby Digital Recei'ver does work
Basically the difference here is using the 5. (analog) surround that is nati've to your sound card VS using a dolby digital receiver (which isn't part of your soundcard). This would be a "home theater" Digital Surround setup.
And their relavent driver help for Creative Cards:
Creative 5. and Audigy problems
You need to make sure you get the latest drivers for your soundcard.
http://www.creative.com
NOTE: There is at least one OEM SB Li've! 5. that does not actually support 5. and Creative will not update the drivers for that card.
NOTE: the Creative online autoupdate may not actually update your card properly (it might just say everything is up to date when it is not) so be sure to download the drivers and install them.
Last Things
Old or Malfunctioning Drivers
If you have the wrong drivers for your soundchip or card and you select 4 or 5. sound (partly working or working poorly) you may make audio stuttering in HL2 worse.
There Can Be Only One
If you have an on-board soundchip and you upgraded to a new PCI board and you did not uninstall the old chip drivers and disable the on-board sound in the BIOS you will make audio stuttering in HL2 MUCH worse! Only run one sound device at a time. (USB headphone devices seem to be ok, but try uninstalling them if you have stuttering to make sure).
If you do have two soundcards installed, typically you must uninstall both completely, remove one or disable one, then reboot and install the drivers for the remaining card/chip.
I have tried once before, and it is just luck that my computer is working OK-ish with its current XP installed drivers.
I have decided to update my drivers, as instructed by Valve, to solve my problem.
I found the driver "Li'veDrvPack_Patch" and downloaded it, but I need the following driver which I ...DO NOT... have.
THAT IS:
Sound Blaster Li've! - Driver Patch
This is an update patch, it is not a complete driver installation. You must have the previous Li'veDrvPack.exe (SBLW-XPWEB-W3-US), posted July 7,2002. in your system if you wish to use this patch.
^ The above, as said by Creative... I have tried both a driver search for "SBLW-XPWEB-W3-US" and "Li'veDrvPack.exe" and I KNOW there were no results. CREATIVE ARE MISSING THIS FILE.
So where is it, I ask?
I calmy request that you update your driver list... and help a lot of people out.
Contact me,
Jonathan

If you didn't find yet here is couple links more
Plain drivers
Creative - search for Li'veDrvUni-Pack(ENG).exe
or
Full packets (with progs)
Fast - http://www.mbnet.fi/ajuriapaja/
Select your OS - # selection '?nikortti' - Creative -> SB...
or
Slower - ftp://22.60.34.5/DRIVERS/SOUND/CREATIVE/ ' take SBLi'veDrvPack.zip
.jtp

Similar Messages

  • Logical filename in broadcasting

    Hi everyone,
    We want to use the bursting functionality to broadcast a report to the portal. We'll split the result to profit center so each profit center gets a seperate pdf document. Now a few hundred pdf files get created but it's unclear which file containts data for which profit center (without opening each file). Is there a way to add the profit center to the filename of the pdf document created? We've lookad at the variable on filename creation but these are not sufficient.
    Kind regards,
    Alex

    Hi Alex,
    I've found a discussion between SAP dev and another customer... where dev refers to the following...
    Filename: (Mandatory) this name is used for the directory name. This
    name is also the technical name of the directory in the database. The
    query_name/tempalate name is taken as default.
    "Display Name: If provided, replaces the Filename for user display on
      the portal.
    If a control query is used (which may generate multiple files), then
    the end files are names based on query_name/tempalate name + index."
    Do you have the option of a display name?
    Please read the following...
    Broadcast to the Portal 
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/29/f50b40c6c01961e10000000a155106/content.htm
    I hope this helps
    thanks
    Orla.

  • In Photoshop Express, cannot sort images in album by filename in thumbnail view (for slideshow)l.

    In Photoshop Express, I want images to appear sorted by filename.  In the "view as a table" it sorts fine.  When I revert to the thumbnail view, the arrangement is random.  The dropdown "show" list does not offer an option for showing by filename.  If I select the"custom" option, it means I would need to sort 300 images by filename MANUALLY (!!!), a job that a computer does in milliseconds.  Anyone with a solution?  Thanks.

    fwiw, with my images in the 'Folder Location' view the photos are in order by their Windows filename. That is the same order as the hardcopy album the photos came from. So I then created a PSE Album. I selected all my photos and moved them into that album. The order of the pictures was retained in the Album. That worked out great. I wanted my PSE images to be in the same order. I thought I would do it with tags. But creating an album seems to work just fine.

  • Filename in non-english are not saved correctly

    hi
    I recently (last week) installed archlinux.
    I come from manjaro so I am to some extent familiar with archlinux.
    now I am trying to solve some issues that have poped up in arch that there were not in manjaro( mostly because manjaro was pre-configured).
    when I use jdownloader to save youtube videos the files names are displayed correctly in jdownloader but not in konsole or dolphin file manager. (they are shown as "????" characters).
    this happens for Persian and Russian characters.
    I thought this was jdownloader issue but this doesn't happen on my pc that has a manjaro installed on it.
    and another thing that makes it weird is that if i create files in dolphin with say Persian language they are shown and treated correctly. but the ones that are created by jdownloader have this issue.
    and another related symptome is that some files that I download from subtitle websites that are in zip format and have some rare European characters in them (like the French and German ones) I cant open them or extract them in dolphin file manager.
    I had a similar issue like this in manajro but in manajro I used file-roller to open the files and that app would work with this files correctly.
    but in archlinux even file-roller has this issue.
    can somebody help me with this?

    Lone_Wolf wrote:
    rezad,
    it was a long time ago i had that problem and locale handling is like a black box to me.
    It's easy to reverse if it doesn't help though, why don't you try it ?
    I have tried it.
    adding other encoding before the famous en-US,UTF-8 one gives warning for default lang and falling back.
    I see these error when running apps from command line.
    adding other encodings after that encoding doesn't show this warning but i have a suspicion that it mean that other encoding are suppressed,
    i have to try it with a file with a wired but known encoding and then adding that encoding to config and testing again.
    my problem is how do i find the filename encoding?(not find content encoding)
    this is the file in question. can somebody tell me what is the filename encoding?
    https://www.sendspace.com/file/fwmxpc
    EDIT:  my findings on this matter.
    even adding all the langs to /etc/locale.gen and then using locale-gen command doesnt fix this. cause this are different issues.
    this problem as a whole doesn't have a solution, cause linux unlike windows doesn't have a default inbuilt filename encoding and it all depends on your environment.
    linux just treat the filename in the encoding you tell it. so it cant detect anything cause there is nothing to detect.
    from its perspective filename are just binary data ready to be interpreted as wished by the user.
    widows on the other hand uses UTF-16.
    plz if anybody have another contradicting point ,then reply but plz dont say I have to use correct encoding. the only way to fix it is using convmv util and that requires finding the correct original encoding.
    thanks for all the replys.
    Last edited by rezad (2015-04-20 14:45:14)

  • Filename in Attachement payload

    Hy,
    I have to detach an email attachement on my file System.
    That's works but I'm not able to maintain the same filename.
    Can anybody help me.
    Thanks
    Mat

    Hi Mattia,
    If your file name is a part of your email atttachment ( the payload ), then you can dynamically create your file name.
    To do this,in the filename of the receiver file adapter, give the filename a <b>%var%</b>.
    Anything between % is treated as a varibale by XI. Now, under variable name substitution, you will have to give the value of var and this will act as the filename.
    You can access the payload using <b>payload:</b> and the XPATH.
    For info on how to do this, check the topic<b> VARIABLE SUBSTITUTION</b> in this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    hope this helps,
    Regards,
    Bhavesh

  • Filename in PDF portfolio?

    Sorry for what I'm sure is an easy(lame) question.
    I don't want to show the filename when creating a PDF portfolio and I've hunted for the answer without any luck.
    How do I only show the image or show a custom text/ title but not the XXXXX.jpg filename?
    thx!
    > just to clarify.... when viewing a PDF portfolio of images I don't want to show the image filename below the image.

    Hi,
    I've been trying to hide the file name myself. It seems intuitive that, while in the Modify area of the PDF Portfolio, under "Specify File Details" that one would simply unclick "Name" under "Columns to Display".
    But all that seems to do is hide it while I'm within the Modify section. I save and go back to view the pdfs and there are the file names.
    Anyone out there know the answer? Even if it's just a link to more info, that would be great. I need to get this out but without the filenames. I've searched in Google but no good info.
    BTW, the Description option is a nice touch and shows upon immediate hover. That's why I don't need to show a file name. Plus, you can write more in the description than is viable/sensible in a file name.
    Thanks for your help.

  • Filename in J2SE Adapter with Variable Substitution

    Hello,
    Within the J2EE receiver fileadapter (and ftp) from SP13 it is possible to compose the target filename and directory based on the payload of a message using variable substitution.
    I wonder if it is also possible to use variable substitution with the J2SE fileadapter. For this it is not documented but i thougth that the same java libraries are used for the J2EE an J2SE file-adapters.
    Aybody??
    Really Nobody??
    Message was edited by: Emile Hermans

    Hello,
    the J2SE Adapter does not support variable subsition. Therefore we created our own class which gets called from the main SAP XI class "XMB2FileProcessor.class" wich is in the jar "aii_msg_adapter.jar". In your own class you can do what ever you need to chane the file name. In the configuration you can set your own parameter to search the payload for a string you want to replace. We also had to come up with our own timestamp, e.g. file2005-11-10 which SAP does not let you do, only the full timestamp is possible.
    One other nice thing is that you can develop our JAVA class local and test it with your local J2SE Adapter Engine on you PC before you deploy it.
    Steps to do:
    1. JAD the SAP class
    2. Put a call in the SAP class
    3. Compile the class
    4. Put the class back in the archive
    5. Create your own class
    6. Create a jar file for it
    7. Put the jar file in the tech_adapter directory
    8. Change the run_adapter start cmd to include your jar file
    It works great, the only issue is if you patch the J2SE engine you have to do step 1 to 4 again but that should it very easy to do.
    Cheers
    Stefan

  • Filename in Photo Gallery

    Since updating my iPad2 to iOS 8, the filenames have vanished from the photo gallery. I am a designer and I used to take the filename of photos as reference for my clients. I have more than 8000 pictures in the gallery. Please HELP
    Hate Apple so much for ruining my work.

    I Can't ever recall seeing file names in the default Photos app. Perhaps you were using iphoto on your iPad which is no longer supported? Check the App Store for other photo handling apps To find one that shows the file names. I use Photo Manager Pro to show photos to my clients. It does a better job of that than the Photos app. you can set the preferences there to display the file name.

  • Filename in Webdynpro for a PDF created with Smartform

    Hi,
    I created a PDF with Smartform in my Webdynpro-Application.
    When I click the save button there is a default filename f.pdf .
    How can I change the filename?
    Regards
    Marcus Schug

    Hi Experts,
    any update on this?
    I am facing the same problem with ESS payslip (smartform/Hrform): my customer wants to have custom file name for download salery statements from the portal. Do you know how to change the default form name unknown.pdf to e.g.. "payslip_month_year"?
    I spent a lot of time to find any possibility to get and change the file name but without success till now.
    Please respond.
    Regards,
    Zdzislaw Kaczmarczyk
    Edited by: Zdzislaw Kaczmarczyk on Jun 14, 2010 4:41 PM

  • FileName in Sender File Adapter Module

    Hi Folks,
    In my sender file adapter have written a module to read the picked file name. The protocol used is NFS.
    Notice that the file name read in the module has the absolute path, including the directory path. E.g The file name xyz has to be picked from source directory
    XIServer\Outbound. In the module when I retrieve the file name, it comes up as
    XIServer\Outbound\xyz. Is this expected behaviour?
    I was expecting just the file name<xyz> to be retrieved.
    Thanks,
    Anand

    HI,
    Create an UDF and write this code.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key =
    DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName;
    in Adapter u will have Adapter specific parameters check the file name check box.
    Using this UDF u will get the file name at target side.
    Regards,
    Phani.

  • Filename in legend

    Hello.
    Quite a basic question but several trials and none worked..
    So in the legend I just want to display the filename without the channel as in "channel name (file name)". I tried free text with "@@ChnFileName(CurrChnNo)@@" but it did not worked out.
    How cn I do this?
    Best regards,
    Brice
    Solved!
    Go to Solution.

    Hi Brice,
    You've got the right idea, but the channel property you need to use is "SourceDataFileName", and you need to use either the ChnPropGet() or ChnPropVaGet() function or the new Data.GetChannel(CCN).Properties approach available in DIAdem 11.0 and later:
    @@ChnPropGet(CCN, "sourcedatafilename")@@ 
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • FileName in ABAP XSLT Mapping

    Dear SDN,
    In an integration scenario we are using sender File Adapter and a  ABAP XSLT Mapping.
    Is there any way to get the source FileName from such mapping.  Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
    regards,
    GP

    Thank you for your help,
    I just try to access the adapter-specific attibutes using:
    <xsl:stylesheet version="1.0"
      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
      xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
    <xsl:variable name="filename"  select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
    </xsl:stylesheet>
    but the following error raised:
    <SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
    have you had this situation?

  • Filename in document

    Hi all,
    Just new to Mac so I've to learn a lot.
    How can I insert the filename (semi)automaticly into the document.
    I have a template document and save this as .... I want the filename to appear in the document.
    Is this possible?? If yes HOW

    As far as I know, we are in a forum dedicated to Numbers '09
    For Numbers v1.0.2, you take care of what was posted several times:
    go to my iDisk:
    <http://idisk.me.com/koenigyvan-Public?view=web>
    and download for free
    For_iWork:iWork '08:forNumbers:paste_thename.zip
    and or
    For_iWork:iWork '08:forNumbers:paste_thepath.zip
    Yvan KOENIG (from FRANCE mercredi 21 janvier 2009 17:56:54)

  • Filename in XFDF - Acrobat 9?

    While submitting the PDF form field data, do we have to manually add the 'f href' element in the XFDF when running on Acrobat 9? Or, is it the acrobat javascript method 'submitForm' which generates the XFDF with field names and 'f href' ?
    Please let me know asap. In my project, its observed that 'f href' element (i.e. filename) is missing in the XFDF retrieved in Acrobat 9.
    Thanks.

    Just revisiting on this topic and hoping for some assistance.
    We are currently generating .xfdf xml form files and they are using <f href=filename.pdf>
    This works fine when superimposing the data in the form onto PDF's using Adobe Reader 8 and lower but with version 9, when the client opens the .xfdf file the .pdf file for the form does not load for the aforementioned reason in the previous posts and therefore the user cannot view the document with the XML data superimposed on the PDF.
    I would prefer not to have to roll users back to Adobe Reader version 8 to make these forms work so I was wondering, can the code eg. <f href=filename.pdf> be changed to be compatible with Adobe Reader 9 as well as backwards compatible with versions 8 and lower and so forth. If this can be done, how does the link need to be coded?
    Thanks in advance

  • Filename in CFHeader

    I'm using the following to export a CSV file:
    <cfheader name="Content-Disposition" value="attachment;filename=download.csv">
    <cfcontent type="text/csv" reset="yes"><cfoutput>#variables.output#</cfoutput>
    This works fine in IE, but in FF the filename comes out as "download.csv," with a trailing comma, and in Chrome as "download.csv, attachment".  Because of this Excel doesn't recognize it.  Why is the filename not coming out as instructed?  I believe this has worked fine in the past, but not in this particular case.

    Try using Excel's type instead, namely
    <cfcontent type="application/vnd.ms-excel">
    What happens?

Maybe you are looking for