Filename where site info is saved
I am re-installing Dreamweaver CS5 on a new computer. My old computer crashed and Windows will not run BUT I do have access to the hard drive and all my data files. I would like to bring over the 'site' file from my old Dreamweaver installation to the new one instead of having to re-create all my site information (over 50 clients). The folder structure on the new computer is the same as the old ... can I just copy a file (or two) over and have the new Dreamweaver installation recognize all the site data? If so, what are the filename(s) and where are they located?
See if any of this is of any help to you:
<http://blogs.adobe.com/dreamweaver/2011/11/backing-up-and-restoring-dreamweaver-site-defin itions.html>
<http://helpx.adobe.com/dreamweaver/using/import-export-dreamweaver-site-settings.html>
<http://cookbooks.adobe.com/post_Migrating_Dreamweaver_configuration__site_settings-17658.h tml>
Good luck.
Similar Messages
-
I am using a trial version of Dreamweaver 9. I can create a
site and it appears in site manager. I can export the site to a
file. When I end the Dreamweaver program and restart it, there are
no sites shown in site manager. I can recreate the site or import
the exported file. Is this because it is a trial version? Where is
the site data saved?> When I end the Dreamweaver
> program and restart it, there are no sites shown in site
manager.
What operating system?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Downloads from itunesU where viewed, played and saved?
downloads from itunesU where viewed , played and saved?
lse123 wrote:
downloads from itunesU where viewed , played and saved?
Look to see where they are stored in iTunes. Most are downloaded and stored in iTunes U under library. Those should be shown in iTunes U which is a part of the iPod app on the iPad. I have had a couple that had bad data in the metadata and were classified as Movies and placed in Movies. I selected those and right clicked (control click if no mouse with right click) on those, selected Get Info, selected Options, and changed Media Kind to itunes U. They were moved to the iTunes U section by iTunes. -
Site definition not saved after closing DW
I moved my copy of DW to a new computer. I exported the site
definitions from the old computer and used the Import option in
Manage Sites to restore them on the new computer. It brought them
all over just fine. When I tried to update a site, though, it saved
it for the duration of the session then behaved as if it never
happened the next time I opened DW. This goes for site name
changes, FTP info, or anything. How can I fix this? Does it have to
do with a profile name? I have a different username on this new
computer if that has anything to do with it. Thankshttp://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"avylon" <[email protected]> wrote in
message
news:fuo0ki$pe$[email protected]..
>I moved my copy of DW to a new computer. I exported the
site definitions
>from
> the old computer and used the Import option in Manage
Sites to restore
> them on
> the new computer. It brought them all over just fine.
When I tried to
> update
> a site, though, it saved it for the duration of the
session then behaved
> as if
> it never happened the next time I opened DW. This goes
for site name
> changes,
> FTP info, or anything. How can I fix this? Does it have
to do with a
> profile
> name? I have a different username on this new computer
if that has
> anything to
> do with it. Thanks
> -
My Default Website Folder & Manage Sites info Not Appearing
The pop up box on the right with the Files, Assets, and Snippets has somehow changed my default "AAA_WebSite" folder under the Files tab to show "Computer." I can still drill down to the correct folder, but since it's not set to the correct folder, all my "Manage Sites" info is missing as well.
Any thoughts?The pop up box on the right with the Files, Assets, and Snippets has somehow changed my default "AAA_WebSite" folder under the Files tab to show "Computer." I can still drill down to the correct folder, but since it's not set to the correct folder, all my "Manage Sites" info is missing as well.
If you're referring to what I think you're referring to, that's the Site Manager dropdown box where you can quick jump between sites in DW and select which site you want to work on.
Click the box (where it says Computer) and select "AAA_WebSite" from the dropdown menu.
If I've mis-understood, feel free to repost. -
I want to publish my changes. Where is my website saved?
I have updated and made changes to my website and I want to publish my changes. It says it is publishing (using Cyberduck) but it still looks the same. Where is my website saved? How can I make changes?
Before you can attempt to use Cyberduck, you have to have published your site to your desktop - you can't use Cyberduck unless it has already been published and you also need to have a hosting account with a domain hosting company before you can upload anything with Cyberduck.
If you have an iWeb created site then you need to make changes within iWeb itself and then publish from there.
Your domain file is stored under User/Library/Application Support/iWeb/domain.sites. Find this domain file and double click and iWeb will open it. Make alterations to your site and then publish to the relevant place either MobileMe or in your case to a folder on your desktop and then upload with Cyberduck to your host. -
Importing site info from Dreamweaver 8 to CS3
I am thinking about moving from Dreamweaver 8 to Dreamweaver
CS3. I have roughly 10 sites that I edit and update. I am wondering
if there is a way to import the site information from 8 to CS3
(meaning the FTP info, folders, etc).
Thanks for the help,
JoeI have a similar issue. I had CS4 installed on my machine with about 20 sites/ftp info etc saved into it. My computer had a complete meltdown and I had to rebuild the computer. I have installed CS4 onto the new hard drive and I was able to save the old hard drive (it was unstable though and safer to start fresh). Is it possible to have my installation of CS4 grab the site information from a different drive on my machine? I was hoping it would just find it when I installed the software, but no such luck.
I tried "importing sites" but I could find any .ste files that it was looking for. Any help would be greatly appreciated. It will take a long time to re-input all of those sites. -
Create a Fully Integrated Layout & Remove Site Info, Site Title, Etc.
Hey everyone. I'm really new to Lightroom so this may be something really simple I overlooked. How do you get rid of extra fields in the lightroom templates that you don't want, specifically the site information?
I want to create a flash gallery that integrates fully into my website. I want it to be a page with just the thumbnails in a simple grid pattern where when you click the thumbnail the full image pops up over the screen (the way it would if using javascript).
I don't want anything else. No slideshow, no site info, no title bar, none of that, because this is going to be inserted into a page on my website. It's not going to be its own site.
Is there a way to create a completely custom template like that with Lightroom or are you stuck using layouts based on their designs?To remove the headers, etc. once the gallery has been created edit the file called style.xml, found in the resources>styles folder of your created gallery. There are true/false entries for things like the header. You can also change the fonts, etc. with more control than is afforded from within LR.
The two lines you're looking for are
(line 57)
(line 64)
Change true to false
As far as achieving the exact configuration you've described, I don't believe it's possible in LR. LR doesn't offer a thumbnail grid to big pic and back kind of scheme. It would be nice. I did a search a while back and there weren't many Flash gallery scripts designed this way. I think the Jet Photo script does it.
Of course there's all the lightbox type javascripts. The TTG Slimbox has been ported to LR, but it's javascript. -
In the latest version of pages is there anywhere in the Inspector that shows me at a balance where the document is saved.
Thanks for this. Well you learn something new every day. I have always struggled with finding that info in the Inspector tabs for years and years and now I find out there was a simpler way all along!
Many thanks -
I am running Dreamweaver 8.0.1 on a PC/XP. Suddenly, DW no
longer maintains the remote info for all of my configured sites. It
retains everything except the login name and password, even though
the save info checkbox is ticked. Once I re-enter the info, DW ftp
works during the current session. If I quit and restart DW, the
login and password are missing again.
This is a really frustrating bug. Does anyone have a
fix?Which DW? Did you ever back up your site definitions with
Site Manager >
Export?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mac_trom" <[email protected]> wrote in
message
news:e66fp1$5et$[email protected]..
> I'm running on Mac OSX10.4 and today all my site info is
gone! I'm talking
> well
> over 30 sites, and to try to recreate them will cost me
hours of
> productive
> time. What happened and where can I find the backup
info?
>
> And no, I do not have IE7 beta installed.
> -
JS scripted needed to add custom text plus filename to file info in document title
Would greatly appreciate any help with this one...
JS script to add custom text plus filename to file info in document title
many thanksSuper :O)
I have a folder of say 50 images and I want to run a JS script batch
example in the document title : image Nr 81205
custom text is "image Nr" + file name "81205"
activeDocument.info.title =" image Nr" + decodeURI(activeDocument.name);
would this be correct without seening the file ext
many thanks -
I had a hard drive failure in windows xp and have reinstalled windows xp and dreamweaver 3. I have a backup of all my dreamweaver 3 files from the old machine, for example &sitename.dws, &sitename Changed.txt, &sitename Live.dws, &sitename Changed.txt. I would like to have all my preferences, ftp info, etc. restored but cannot find any documentation on how to do that in Dreamweaver 3.
I tried replacing the following files with the backup versions:
C:\Progam Files\Macromedia\Dreamweaver3\Configuration\SiteCache
C:\Program Files\Macromedia\Dreamweaver3\Configuration\SourceFormat.txt
as these were the only files I saw that appeared to have been modified by using Dreamweaver on the XP machine before the drive failure.
Is there any Dreamweaver 3 documentation about the names of preferences files, site files, and how to replace the default install files with backed up versions?
All help is sincerely appreciated as I have not been able to figure this out on my own. I considered just replacing all the DW install files with my backup, but that would probably mess up the registry and I can't chance that.
Ultimately I will be moving to CS5.5--if I ever get my backed up information into my newly installed Dreamweaver 3, is there a way to migrate those preferences, site info, etc. to CS5.5?Murray 'ACP', you are correct--DW3 does not have the option to back up to *.ste files, so I believe that pzciena is correct in stating that site information in DW3 is found in the registry and I can't recover that using files from my drive backup. The reason I asked the question is because I am having trouble when using the FTP "Put" function to FTP files over to my website. The "Put" operation creates a subdirectory to the root file on the host.
The host directory is named "web" and I specify /web in my dreamweaver remote host site definition. The "Put" operation creates a subdirectory using the same name as my local files subdirectory. That is, on the local side, the file I am "put"ting is in subdirectory /hostsave and when it FTPs to the remote side, it creates a directory named "hostsave". I deleted that directory on the remote side and tried FTPing a second time and it created the directory again. This does not happen if I use Ipswitch to FTP the file, but I would prefer using the file transfer within dreamweaver since it checks to make sure I'm ftping all the image files in the .html file I'm PUTting.
I obviously have not re-created something correctly in redefining my site. ???? -
I would like to add a site to my saved passwords. Is there a file that I can edit to get this done?
This data is stored in key3.db and signons.sqlite, but there is no way to manually add a site. (The only way to add sites is to log into the site and use the "Remember password" button that drops down)
-
I saved my completed rendered video in Publish and Share as an MP4, but where is the file saved to. I set it to be saved on my desktop, but I don't see it. thanks
markg
What version of Premiere Elements and what computer operating system? You have a few other threads awaiting follow up, and consequently that information
is not available elsewhere.
What is your specific export...
Publish+Share
Computer
AVCHD
and Presets = MP4 - H.264 1920 x 1080p30 or something like that.
Specific please.
But what specifically are you entering in the Save In: field of the dialog that includes the Save button to initiate the export process.
Are you saving it as a file to the Desktop or to a specific folder on the Desktop? Have you given the export a distinctive file name?
The screenshot shows the Save In: to the Desktop as a file.
I have no idea of your background with the program, so I ask these questions so as to take nothing for granted.
If the computer Desktop is crowded, as mine often is, it is easy to have difficulty spotting a file save to the Desktop.
We will be watching for your follow up.
Thank you.
ATR -
Where is the data saved in the srtucture for a particular tcode
Where is the data saved in the srtucture for a particular tcode.
For eg in MM01 there is a field with RMMG1
where dioes the data get saved from this field as in backend it shows the stucture and the structure can hold data only at runtime,
Please help me
Thanks in advance
chinnuHi,
The strcuture : RMMG1 holds data at run time only that to it can hold only one record at a time.
so we use this structure to hold data at run time and then we insert those values into database tables for that program.
Here you can the values stored and processed in the program in the tables : MARA (for matnr ,mbrsh,mtart..),MARC (for Plant ),MARD( for storage location : lgort )...etc.
so if you want to fecth some data means first you have to choose right table to fetch information by passing values in the selection screen.
Regds
Sivaparvathi
Please reward points if helpful...
Maybe you are looking for
-
Intel Turbo Memory 4GB on T61 ICH8M Controller
The little 1GB Turbo Memory on my 4GB RAM system was of little use. So I had the great idea of buying the 4GB Turbo Memory card so I could use User Pinning. Unfortunately, I didn't read that it only works with the ICH9M Serial ATA controller - my
-
How to connect iPhone 5 to Netgear router
After spening several hours on the phone with an Apple rep trying to figure out why my new iPhone 5 would not connect to my Netgear router. I decided to google Netgear router and iPhone. I stumbled on this discussion from defiantmacho dated August 20
-
Outlook not Displaying all Sharepoint 2007 Shared Calendar entries
Hello all, we have an issue that I've been working on for a while with no success. One Sharepoint List (Calendar) with approval workflow, connected to Outlook. Two users with the same privileges to the list. Both users see all "approved" items when v
-
Need Help With Drivers for 488ca
Hi I'm having nothing buy trouble I have a designjet 488ca and for the life of me can't down lode the soft ware they no longer make the CD and this thing is just keep going around with the same old crap I would be glad to pay for the CD if they just
-
Getting Warning while adding Dimension table to FACT LTS
Hi, While i am applying join betwwen fact and Dimension at BMM level, i am getting warning as there is no join with Fact Source, even though i provided join there. Can any one help in this. thanks Manu