Filenet Archive to SAP Migration - Problem with DMS_KPRO_CONVERT2

Hi there
We seem to be having an issue with a Filenet RFC to SAP Content Server migration.
We run the report DMS_KPRO_CONVERT and eveything seems to run fine.
When we run DMS_KPRO_CONVERT2 to move the files, we seem to pick up an error:
File /saparchive/DV2/username (where username is my username) cannot be opened
In looking at what is happening, it seems to save the file to the filenet archive exchange directory as the username (with no file extension) however it seems that the system has problems accessing this directly to check the file in to the new repository again and fails.
If I manually check out the file and check it into the sap content server, there is no problem so it doesn't seem to be an issue that either the SAP content server or the filenet server is not accessible.
Any ideas what the issue could be?
Regards,
Athol

Hi Athol,
You have marked this question as answered so can you please help me How you have overcome this issue?
Do we have to run both DMS_KPRO_CONVERT and DMS_KPRO_CONVERT2 reports while migrating DMS documents from Content server to other archive server?
Thanks in advance!
With Regards,
Ajay

Similar Messages

SAP Performance Problem with Oracle 10 on Sun SPARC T5240 server

Dear Friends,
We have a performance problem after migrating our SAP ERP 6.0 basis system. We moved to new servers a month ago.
According to SAP EarlyWatchAlert Report, CPU response time is too high, altough CPU utilization is never more than 5%,
The current system is :
Database server : Sun SPARC Enterprise T5240 Server - 2 CPU´s with 6 core, 8 thread, 1.2 Ghz 32 GB RAM
and we use another identical configured server as an application server.
Database is Oracle 10.2.0 and operating system is Solaris 10.
The problem is average CPU response time is 450 ms, and max. CPU load is %5 percent.
Pre-migration configuration with old servers, we had CPU response : 150 ms and max CPU load: 50%.
Old configuration : 2 X HP rp3440, 2 X PA 8800 CPU (2 core, 1.0 GHz).
Have you got any experience with a similar situation, which setting might be wrong for not fully utilizing server CPU´s?
or do you know any similar configuration for benchmark?
Thanks in advance
Uzan

Our organization upgraded an application - The vendor had originally suggested a T2000. When we finally migrated onto it, the performance was worse than the older version of the application. The vendor hadn't yet tested the combination of T2000 and 10.2 with their application when they had made that hardware recommendation, they subsequently revised their recommendations. We ended up with an M4000.
The application performance, IMHO, still stinks. But that's because it's a java based application written for database independence.
The interesting item to note here, is that in the application teams 'selective' testing - everything worked fine. When the testing was extended to include users who didn't follow the 'test plan', they found performance begin to tank. Then with more users, more testing, they found that the T2000 was not going to perform well. The test plan by the apps team was not sufficient to find the issues, and they did not include any load testing!
Edited by: dbtoo on Jun 5, 2009 11:20 AM

SAP BW : Problem with precalculation job on WebTemplate depending on user

Hi experts,
We have a problem with the precalculation job on WebTemplate. When we schedule this job with a specific user, the job run normally and precalculation is done on step 3 :
Step 003 started (program RSRA_JOB, variant , user ID E0126831)
Start package ZBWP_SCHEDULE_TEMPLATE
- Start setting ZBWP_WAD_001 with variant -
Precalculation: initialization started
Precalculation: processing started
Precalculate data (fill DataStore)
Processing data provider DATAPROVIDER_1, query ZBWP_IS01_001
Processing data provider DATAPROVIDER_10, query ZBWPM_016
Processing data provider DATAPROVIDER_11, query ZBWPM_016
But when we change the user to a technical user (like BATCH or ALEREMOTE which have the profile SAP ALL ), the job don't do any precalculation in step 3 :
Step 003 started (program RSRA_JOB, variant , user ID ALEREMOTE)
Start package ZBWP_SCHEDULE_TEMPLATE
- Start setting ZBWP_WAD_001 with variant -
Implementing settings finished
Did you have an idea for this problem ?
Thanks in advance for your response.
Regards,
Mathieu

Hi,
Try to trace the log files in RSRD_LOG and also check files in C:TEMP.The precal server trace files will be stored in the subdirectory of C:TEMPBWAnalyzer .
for more information look in belwo blog
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30e3d697-4ca0-2c10-4b81-c474b1490064?quicklink=index&overridelayout=true
Thanks

6i - 10G migration problem with sdo_geometry.srid

I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
Error 801, at line 0, column 0
Internal error [60513]
Seems Forms 10G can't handle geometry types which 6i could.
Do I have to move this code to the server of is there another way to handle this?
Rene

I'm migrating a forms application from 6i to 10G and Forms Builder 10G fails to compile a form. The statement it's having a problem with is this:
update nbg_redline_element r set r.geometrie.sdo_srid =p_srid;The error I get is an internal error:
Error 801, at line 0, column 0
Internal error [60513]
Seems Forms 10G can't handle geometry types which 6i could.
Do I have to move this code to the server of is there another way to handle this?
Rene

Iphoto migration problems with faces

I recently attempted to migrate my iPhoto Library from my old iMac to my new MBP by copying it to an external drive and then copying that to the MBP hard drive. The iMac was running iPhoto 9 (couldn't upgrade the OS due to RAM limitations) and the MBP is running iPhoto 11. The original library had a minor problem with Faces in that it would always identify a few faces for certain people but even after hitting "confirm" it would still leave those as unconfirmed. A minor annoyance and I didn't really care. Since transferring it however, Faces on the MBP takes literally 5-10 minutes to close once I hit "save" after confirming faces. If I click on the icon in the dock during that time it says "Application Not Responding." In addition, some of the faces are now blank boxes with dashed lines around them.
I've run through all the repair options within iPhoto (via the command-option menu when starting it) including a rebuild. When that didn't help I rebuilt the library with iPhoto Library Manager. Now it doesn't recognize any unconfirmed faces as belonging to anyone whom I've already categorized. I did upload new photos, tagged a couple faces and it didn't recognize that the same face in the same scene in another photo was likely the same person as in the previous 4 photos. Weird. Stranger still is that Faces now has tagged a bunch of people with the wrong names. So I open up Aunt Jane's Faces folder and there's the faces of Uncle Mark, Cousin Pete, etc. Clearly something is corrupted. I could just go back to using the old Library on the iMac and hope it doesn't totally kick the bucket but it's never been the same since I upgraded it to Mountain Lion and I'd really like to have access to my photos on my MBP. Any suggestions? TIA.

Hi, can't be on 10.3, what is the OSX version you're on?
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot & hold option or alt key when opening iPhoto.
Any change?

CUCM 8.6(2) migration problem with external calls

Hello all.
Yesterday we have migrated our telephone infrastructure from CM4.x to CUCM8.6(2), after some weeks of tests.
Yesterday night all seems to work properly, all phone updated and registered, external calls going out and in.
But from this morning, with all users at work, it appears a strange problem, that until now I couldn't solve: randomly all external calls go down.
I can't address this problem, since gateways (all cisco 2811 routers) are the same and with same configuration as yesterday.
All thing that I can think is that router that seems to cause the problem is configured not with mgcp by cucm, but with h323 route inside the router.
Any suggestions will be greatly appreciated.
Daniele

GW says normal call clearing.
But, maybe I've addressed the problem.
I've found a bug fixed into latest cucm release (8.6(2a)SU1) that say "h.323 calls improperly disconnected".
So I'm trying to upgrade from 8.6(2a) to 8.6(2a)SU1, but process fails :-(
I've tried from a dvd and also loading iso image from sftp, but after few minutes appears an error
08/04/2012 09:43:55 upgrade_install.sh|Started auditd...|
08/04/2012 09:43:56 upgrade_install.sh|Started setroubleshoot...|
08/04/2012 09:43:56 upgrade_install.sh|Changed selinux mode to enforcing|
08/04/2012 09:43:56 upgrade_install.sh|Cleaning up rpm_archive...|
08/04/2012 09:43:56 upgrade_install.sh|Removing /common/rpm-archive/8.6.2.21900-5|
08/04/2012 09:43:56 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|
08/04/2012 09:43:56 upgrade_install.sh|set_upgrade_result: set to 1|
08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|
08/04/2012 09:43:56 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 1286).|
08/04/2012 09:43:56 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 1286)|
I've rebooted server yet and problem remains.
Thanks for any other suggestions.
Daniele

OWB 11.2.0.1 SAP LOCATION: Problem with separate FTP Server connection

Hello,
hope somebody can help me. We are working on a BI Project by our Customer with a Exadata Machine.
The Goal of this project is to have the DWH on the Oracle Exadata machine.
At the Moment we have the Development System on a separate Server with OWB 11.1. and are to get stuck because we can't work with OWB 11.2 with the problem we have.
Separate for the coming Migration we set up for testing a machine with OWB 11.2.0.1 (Exadata is productiv system, so not available for testing)
The SAP System of the customer is on a separate physical Machine as the FTP Server.
The new possibility from the OWB 11.2 SAP Location allowed choose between different transport type, also for a separate FTP Server.
We took FTP as Transport Type and we input the FTP IP Adress, User etc.
The Inputs are all correct, we have also check if its possible to connect the FTP server via fillezilla, via cmd -- all works fine
But OWB 11.2 show us by test the connection this Error:
ENV0032: Location SAP_TEST is invalid. Check that you provided the PASSWORD or+
valid values for at least one of the set of mandatory parameters+
HOST_LOGIN_HOST+
I know that seems as if some is not ok with the password or the other parameters.
But all inputs are correct and the password doesn't contains any special character.
Also the connection to the SAP system works fine with OWB 11.2 but not with the FTP System.
Have somebody experience with this error or on a project by customer with separate SAP and FTP System?
Thanking you in anticipation

Hello,
hope somebody can help me. We are working on a BI Project by our Customer with a Exadata Machine.
The Goal of this project is to have the DWH on the Oracle Exadata machine.
At the Moment we have the Development System on a separate Server with OWB 11.1. and are to get stuck because we can't work with OWB 11.2 with the problem we have.
Separate for the coming Migration we set up for testing a machine with OWB 11.2.0.1 (Exadata is productiv system, so not available for testing)
The SAP System of the customer is on a separate physical Machine as the FTP Server.
The new possibility from the OWB 11.2 SAP Location allowed choose between different transport type, also for a separate FTP Server.
We took FTP as Transport Type and we input the FTP IP Adress, User etc.
The Inputs are all correct, we have also check if its possible to connect the FTP server via fillezilla, via cmd -- all works fine
But OWB 11.2 show us by test the connection this Error:
ENV0032: Location SAP_TEST is invalid. Check that you provided the PASSWORD or+
valid values for at least one of the set of mandatory parameters+
HOST_LOGIN_HOST+
I know that seems as if some is not ok with the password or the other parameters.
But all inputs are correct and the password doesn't contains any special character.
Also the connection to the SAP system works fine with OWB 11.2 but not with the FTP System.
Have somebody experience with this error or on a project by customer with separate SAP and FTP System?
Thanking you in anticipation

2010 to 2013 migration problem with service application

With a 3rd party migrator we are able to migrate a simple 2010 site to 2013. By simple UI level approach sites are migrated easily. But we have a large project where we have good amount of work done on various service applications.
We are facing problem to migrate entire 2nd SP2010 application with service applications. Do any one has idea of smooth migration of large service applications to 2013 with avepoint or quest tools?
If faced same problem then share steps.

The Microsoft guidance for upgrading a SP2010 farm to SP2013 is in the link below. Most of your existing SharePoint out of the box service applications can be upgraded also. This includes User Profile Service Application and the Search Service Application.
Custom service applications most likely not upgradeable. Hopefully the guidance was followed so there should be no problems.
http://technet.microsoft.com/en-us/library/cc262483(v=office.15).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Migration problems with Tomcat 4.1.10. Please help.

Product:           Java Web Application
Operating system:     Redhat Linux 7.3
Web Server:          Apache 1.3.x
Application server:     Tomcat 4.1.10
Database server:     MySQL 3.23.x
Java Architecture:     JSP (presentation) + Java Bean (Business logic)
JDK version:          1.3.1_04
Hi,
     When we tried to migrate our application from Tomcat 4.0.4 to Tomcat 4.1.10, we found that the relative path references like ../xyz/ab.jsp are not properly interpreted by Netscape and the url seen on the address bar is something like this (http://www.sww.com/../xyz/ab.jsp. Also dynamic jsp forwarding support seems to have changed. While forwarding, the dynamic parameters attached are automatically url encoded. We have tested our application on Tomcat 4.0.4, there were no such issues. Since we have used these sort of things in many places in our application it will be difficult for us to change in all those places. Can anybody tell us what we can do about it?
thanks in advance,
Srikanth. S.

Hi,
http://www.xyz.com/swiz/test.jsp:
<%
response.sendRedirect("../sebase/common_login.jsp");
%>
When I run http://www.xyz.com/swiz/test.jsp with the above code, the url is displayed http://www.xyz.com/swiz/../sebase/common_login.jsp in Netscape address bar when the application is run on tomcat 4.1.10. With Internet explorer and opera, it reads http://www.xyz.com/sebase/common_login.jsp. But on Tomcat 4.0.4, there is no problem even with Netscape. Since we are tracking the urls in many places in our application, we are having problem because of the above said type of url interpretation.
thanks in advance,
Srikanth. S.

Migration Problems with Time Capsule and New MacBook Pro

Hopefully someone on here can help with with this problem I'm having. I just bought the new 13' MacBook Pro this week from the store and I no longer have my old MacBook Pro. I have a Time Capsule with complete backups of my old MacBook Pro and I also have the internal hard drive from it as well.
I had installed the beta version of Mountain Lion on the old MacBook Pro and the new one still has Lion.
The problem is that every time I have tried to use the Migration Assistant (and I've tried 3 times now) my files and applications are getting messed up.
iPhoto won't open. It says that it needs to be updated but when I check to update it it says that there is no update needed.
I'm seriously about to beat my head against the wall because every time I migrate the data it takes about 12 hours. I'm thinking at this point that it might be easier for me to just swap out the internal hard drives in the units because it is possibly an issue with the OS' and wait until next month to try migrating to the new drive again after Mountain Lion is officially launched.

Bob,
I appreciate your honest and prompt response. I was VERY SPECIFIC when I told the sales rep I was hoping to use the Time Capsule with two different MacBook Pro's on different subnets (one is behind a firewall on a router, one is directly connect to a WAN side IP with no firewall) and the sales rep made a point of saying that the dual band feature would facilitate this connectivity which left me with the impression (obviously wrong) that the WiFi features of the time capsule could be used to communicate with multiple Macs regardless of their own networking configurations. (I have been configuring fairly complicated networks for 20 years and only bought my first Mac two and a half years ago; the second Mac is only six months old; the third will be bought next month.)
This isn't the end of the world for me... it does require reconfiguring my network and doing a lot of port tunneling for the box outside of the firewall in order to bring it inside as well as giving up some remote access redundancies (which were based on the ability to connect to both machines using VNC software which is port specific which means that it needed separate WAN side IP addresses).
Overall I love the Mac approach compared to the nightmare that was (is) Windows (although I do also run an Ubuntu Linux box just to keep me honest). That said, your sales reps do your products a HUGE disservice when they give glib and incorrect answer to what was, I believe in my case, a very specific and precise question.
Bill Wood
Watertown, Mass.

OSX 7 Photoshop 4, migration problems with 150:30 error

Luckily my recently deceased MacBookPro (2008) was fully backed-up on "TimeMachine". Good move!
Yesterday I purchased a new machine, with OSX 7 pre-installed, and used "Migration Assistant" to transfer my "Time Machine" saved data to this new machine. Worked great! Fair move!
Unfortunately there is just one glich.
Glitch: Error 150:30 All previous moves negated!
My reasearch indicates that there may be a problem caused by not de-authorizing PS4 on my suddenly-dead machine. (What part of dead do I need to explain?) Result : Dead end.
Now I went searching for some "Flex..." file in the startup disk's hidden Library. Unfortunately, it did not show up during my search.
I found an Adobe page that had promised to help me but the promised support was non-existent, in the end.
Should I attempt to re-download the software—PS4—from the Adobe site using the link in my original Adobe "receipt of purchase" confirmation? (Location: my online account information with Adobe.)
Where should I go from here? What should I do from this point in my search for a solution? What futher information should I be supplying to this forum that would help in formulating a successful solution to my problem?

Mylenium
Thank you for your assistance with this matter.
I am assuming that once I have run this Suite Cleaner Tool, I should sign back into my account, on the Adobe site, and pull up my sales receipt for the original "PS4 upgrade purchase" and re-download PS4—from Adobe— and install the whole programme again. Then, after I go through the procedure of re-registering it with Adobe, on my new machine, it should be fully functional. Hopefully, problem solved!
Please correct me if any part of my assumption is wrong.
Thanks again for your help.
Cheers,
Ralph

SAP B67876125 problem with Nokia E90

Mercedes Benz SAP B67876125
Nokia E90 07.40.1.2
I recently replaced Nokia E60 with Nokia E90. Pairing and phone calls work fine. I have a problem downloading phone memory phonebook to the SAP B67876125 from Nokia E90. I can only see the SIM phonebook. This problem did not exist with the Nokia E60 which downloaded the phone memory phonebook with no trouble.
Any ideas?
Thanks.

Hello,
I think that your problem is because N900 is very new device and Parrot should/will make firmware update for MK9100
in case to be compatible with your new mobile.
I have Parrot 3200LS and after installing the newest firmware everything about conection with N900 is fine,
except this - I can only send contacts to Parrot one by one.
Regards.

JSF Tomcat to SAP migration problems.

Hello everyone,
I'm working on trying to deploy our current application to the SAP AS. Currently the application is in .war format and runs fine on Tomcat 5.0.
I've followed the instructions that are posted in the following blog /people/michael.esslinger/blog/2006/01/09/javaserver-faces-on-web-as, and was able to re-create the WAR and EAR files to deploy. The application is deployed, but I run into this error at startup:
Initialization of servlet <JavaServerFaces> failed!
The error is: java.lang.NullPointerException: nullnull
followed by
Warning occurred on server 3313950 during startApp sap.com/apriori_ear : Initialization of servlet [JavaServerFaces] failed. Check the init() method of the servlet. Error is: [java.lang.NullPointerException].
I've researched into the NullPointerException problem on multiple websites, and made changes to my web.xml according to the walkarounds to the same problem from the people with different AS, however none of those seem to make the error to go away.
If anyone could provide a guidance as to what might be causing this error, I would greatly appreciate it.
Regards,
Cyril

Hi,
im having the same problem using a webapplication with velocity templates based on struts.
is there a kind of incompatibility of J2EE Engine 7.00 to velocity?
Or did you find a resolution for your problem?
thanks!
Stefan

Getting Ready for Migration - Problem with BT ID

Hi,
I have read several e-mails from a recent thread on the forum which suggest that Migration of BT Yahoo e-mail accounts to the BT Mail service might resume sometime soon, and may even be completed by the end of April. Whether that will be so or not I guess we will have to wait and see. However, just in case, and for my account to be as ready as it can be, I need clarification of a particular potential problem.
I used to have two phone lines, let us say Line 1 and line 2. Now I only have one 'active' line (Line 1). Line 2 was cancelled a long time ago and my Broadband transferred to Line 1.
The above two lines had two seperate BT ID's (e-mail addresses). One being my Primary e-mail address which is one that ends @btinternet.com, but this remains the BT ID attached to Line 2 (the cancelled line).
The second BT ID, for Line 1, now my only line, has a User Name (e-mail address) which ends @gmail.com. The use of this e-mail address as the User Name was configured by a person on the BT Support Desk several years ago, when trying to resolve an issue at the time.
This morning I tried to change the User Name (e-mail address) on my BT ID for Line 1, so that it has the correct Primary e-mail address (ending @btinternet.com), I was unable to do so as the system said that this e-mail was already in use on another account (see above re cancelled line 2).
I can presently see no way that I can remove/delete/edit the account that covers the old cancelled line, so that it 'frees up' the use of my Primary e-mail address (@btinternet.com), enabling me to use it as the BT ID on my only remaining line (Line 1).
Is there a way I can cancel/delete/remove the now unused account? If not, is there a way for me to edit my Profile on Line 1, so that I can use my correct Primary e-mail as the ID, in preparation for the migration?
I apologise if this sound messy, but I want my account to be as 'clean' as possible, so that there are no potential problems when it finally comes to migration taking place.
Any help or advice would be much appreciated.
Regards,
Alan

Hi,
First of all, thanks to whiskywheels for the well-intended suggestion. I appreciated the thought, but in my experience there is not a chance that just a phone call to BT Support whould have solved the problem. It was BT Phone Support that in part are responsible for creating the problem I now find myself with.
However, the reason for my coming back on this is to say that I had a phone call this afternoon from a MOD who I am absolutely certain was trying to be honest and helpful. The upshot of what she said is that no useful purpose would be served by changing my BT ID, as I only have one BT ID, not two as I intimated in my first e-mail in this thread (see message 1 of this thread for an explanation).
I do have two accounts (one live - with the only phone line I have) and (one dead and now unused, although I can still access its information in MyBT).
Following the MOD's advice, having nothing to this effect in writing, I will try not to quote her exactly (I don't want to fall foul of breaking any BT rules etc), but my understanding was that my Primary e-mail address, and several sub-accounts are all 'linked' to one BT ID she said I have, the one that ends [email protected] .
My reason for raising this in the first place was to be as prepared as I can be for Migration to BT Mail when it finally comes along.
I have however to admit to now being really confused. Maybe it is the case that I have confused what is an ID, and the use of e-mail addresses as an ID. What I mean by that is as follows:
Using the e-mail tab on the BT.Com homepage the login asks for BT ID or Email Address, and then a Password. If I then use the one BT ID I am told that I have, then subseqently add the current e-mail password, I get a message which says "We don't recognise your details. Please check you've entered your full email address and password correctly and try again."
When I try inputting my primary e-mail address (instead of the BT ID), and then the e-mail password as before (which did work ok this afternnon, but now will not) I currently get the predictable request to change my password. It's a nightmare to say the least, and fills me with no confidence whatsoever for when that fateful day of Migration finally arrives.
If the login that comes up after pressing the e-mail tab asks for a BT ID, why will that not work, if as the MOD says I only have one BT ID not the two that I had thought. I could go on, but I am sure you get the point, confusion reigns!
I would have much preferred that my BT ID was the same as my primary e-mail address, but the MOD in question said 'to the effect' that it was not necessary.
Any thoughts or advice??
Regards,
AlanF

Invoice List SAP script - Problem with SAP script functionality

Hello Friends,
I am working on SAP script - Invoice List SD_INVOICE_LIST. The invoice list contains the underlying billing documents. As per the standard functionality, in the line items, its printing the underlying billing documents with the net value. My requirement is to dig these line items into another level, meaning, I need to display the line items of billing documents as well(like material, material description, quantity, net price and net value of that item etc).
The billing linte item informatin is stored in VBRP table and the VBRP structure is not at all defined in the print program of SD_INVOICE_LIST (I.E.RVADIL01). Change of standard SAP program is not an option for me here.
In the external subroutine we can fetch these line items for each billing document in the invoice list. However, my question here is how to take these line items back to the sap script and print them in SAP script (We can print one line item but how to loop these fetched lines and print them on SAP script. Any help in this regard would be greatly appreciated.
I think there is no standard smart form exist for the invoice list. Please also let me know if there is any standard smart form available for INVOICE List.
Thanks in advanace for any help in this regard.
Best regards,
Siva

Hi
As you cannot change the standard, you will have to see if there are any enhancements provided in the print program. if not you have to copy into a custom one and do changes accordingly.
Thanks,
Venkatesh

Filenet Archive to SAP Migration - Problem with DMS_KPRO_CONVERT2

Similar Messages

Maybe you are looking for