FileNotFoundException when using the Help.addBook method
Hi,
I tried to use the following code:
HelpSet helpSet = new HelpSet(myUrl);
Help help = new Help();
help.addBook(helpSet);
However, when trying to launch my application, a "FileNotFoundException: c:\Documents%20and%20Settings\...\myToc.xml" is thrown !
This problem occurs when using the JDK 1.4 (it does not seem to depend on the version of Oracle Help for Java: I tried to use successively 4.1.16, 4.1.17 and 4.2 versions !).
When developping my own application, I encountered a similar problem and found that it was related to a change in the java API. More precisely, prior to JDK 1.4 beta, getClass().getResource("myFile").getFile() would return "/c:/Documents and Settings/myFile" which could be used to read "myFile". But in JDK 1.4 beta, it returns a location that has spaces translated into %20 characters ("/c:/Documents%20and%20Settings/myFile") which cannot be used as a valid file name in java.io.File or java.io.FileInputStream classes.
Could you help me ?
Carine.
Hi,
"myUrl" is the url of my "helpset.hs" file.
This file is written as follow:
<helpset>
<title>Validation</title>
<maps>
<homeID>top</homeID>
<mapref location="validation_map.xml"/>
</maps>
<view>
<title>Table of Contents</title>
<label>Table of Contents</label>
<type>oracle.help.navigator.tocNavigator.TOCNavigator</type>
<data engine="oracle.help.engine.XMLTOCEngine">validation_toc.xml</data>
</view>
<view>
<title>Index</title>
<label>Index</label>
<type>oracle.help.navigator.keywordNavigator.KeywordNavigator</type>
<data engine="oracle.help.engine.XMLIndexEngine">validation_index.xml</data>
</view>
<view>
<title>Search</title>
<label>Search</label>
<type>oracle.help.navigator.searchNavigator.SearchNavigator</type>
<data engine="oracle.help.engine.SearchEngine">validation_search.idx</data>
</view>
</helpset>
Thank you,
Carine.
Similar Messages
-
Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!
Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium -
Photoshop CS6 crashes all the time and especially when using the type tool... please help!
Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 2A80273WXMN
Mirror: Off
Online: Yes
Rotation: Supported -
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
Software shuts down when using the lightning effects filter. Help!
Software shuts down when using the lightning effects filter. Help!
Have you done a Forum search yet?
Is your GPU driver up to date?
What are your version of Photoshop, OS and GPU anyway? -
My iPod shuts off repeatedly when using the Nike running app. Have already tried the headphones solution that Apple has recommended. Can anyone help?
Using the 5th generation iPod. Purchased it a few months ago before the new one was launched. Yes the workout randomly ends when I am no where near the time or distance I have programmed in. I keep tried to restart the workout and the same thing keeps happening over and over again. I figured it may have been the headphones but I have even tried holding the headphone connection in place, and different headphones as well and it continues to happen.
-
I have a website - www.pawsitivepamperings.com, and I have been adding products for the last 6 months. I have been using the copy/paste method from my drop shipper. Since the end of last week, it hasn't been working. It has totally stopped my progress! I need help in using this function again - as soon as possible. Can you help me?
I right click, and Copy from an HTML description from my drop shipper. Then I go to my website and right click to Paste.
One of two things happens. (1) if it does copy, the text prints over the image; OR (2) I get a message that Firefox does not apply a Cut/Copy/Paste.
The wording at the bottom of the description box says: Path: table> tbody> tr> td> p> font.
I was told by my webmaster to eliminate the following but I don't see it on my products page: <table align="center" border="0" cellpadding="1" cellspacing="1" width="100%>.
When I have been on a 'live chat' with my support team, a couple of them have overridden the issue and I could precede, but I go to the next product to add, the whole process starts again and I cannot proceed.
Does this make sense? -
Omit the XML declaration when using the PHP MM_XSLTransform class
Hi
Is there any way to omit the XML declaration when using the
PHP MM_XSLTransform class?
When using the PHP MM_XSLTransform to transform some XML into
HTML, the XML declaration is faithfully delivered, which is
expected. In my case though this ends up in the body of the
document and is not desired. I wish to choose that the XML
declaration is not shown.
I have tried to use the <xsl:output method="xml"
encoding="utf-8" omit-xml-declaration="yes"/> in the XSL
stylesheet but the declaration still appears.
Any help?
all the best
DaveJim20005 wrote:
> I'm using XLS transfomation in DW for reading XML files.
Now (I'm just back
> form holiday), my webspace provider has updated to php
5.1.5. I'm getting this
> error:
Comment out line 301 and add two new lines immediately after
it like this:
// $xml = DOMDocument::loadXML($content);
$doc = new DOMDocument();
$err = $doc->loadXML($content);
This is part of a PHP 8.0.2 hotfix that can be obtained
directly from
Adobe support.
David Powers
Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
http://foundationphp.com/ -
Intermittent error when using the Disco Viewer client
Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael -
How do I remove an old username from the app store when using the update function
How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
Adobe Photoshop CS4/5 Crashes when using the Move Tool
Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
"charging is not supported" when using the cable that came with ipod
I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging. I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.
- Look at both partsof the 30 pin dock connector. Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad. Try a new one.
- Try a reset. Nothings is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
How to add image in virtual dir / i/ 11g when using the embedded gateway
Hi,
Does somebody knows how to 'simple' import a file or directory
into the /images/ or /i/ directory created by APEX without tricks like in How I added a new image to APEX in 11g when using the embedded gateway.
when using Database 11g with the embedded gateway. with webdav of ftp.
When I use the url http://localhost/images
I need to logon.
There is not 1 username/password that I can use. I tried all.
When I try http://localhost/i/16admin.gif then the gif is shown.
I must be something with ACL's or DBMS_EPG or maybe the default port 80 that I use?
My configuration is
Doing 11.1.0.6.0 checks
############# Status/Version #############
XDB Status is: VALID at version 11.1.0.6.0
############# OTHER DATABASE FEATURES #############
Oracle Application Express is VALID at version 3.1.2.00.02
OWB is VALID at version 11.1.0.6.0
Oracle Enterprise Manager is VALID at version 11.1.0.6.0
Oracle Ultra Search is VALID at version 11.1.0.6.0
OLAP Catalog is VALID at version 11.1.0.6.0
Spatial is VALID at version 11.1.0.6.0
Oracle Multimedia is VALID at version 11.1.0.6.0
Oracle XML Database is VALID at version 11.1.0.6.0
Oracle Text is VALID at version 11.1.0.6.0
Oracle Expression Filter is VALID at version 11.1.0.6.0
Oracle Rules Manager is VALID at version 11.1.0.6.0
Oracle Workspace Manager is VALID at version 11.1.0.6.0
Oracle Database Catalog Views is VALID at version 11.1.0.6.0
Oracle Database Packages and Types is VALID at version 11.1.0.6.0
JServer JAVA Virtual Machine is VALID at version 11.1.0.6.0
Oracle XDK is VALID at version 11.1.0.6.0
Oracle Database Java Packages is VALID at version 11.1.0.6.0
OLAP Analytic Workspace is VALID at version 11.1.0.6.0
Oracle OLAP API is VALID at version 11.1.0.6.0
############# XDBCONFIG INFORMATION #############
acl-max-age= = = 15
acl-cache-size= = = 32
case-sensitive= = = true
call-timeout= = = 6000
max-link-queue= = = 65536
max-session-use= = = 100
persistent-sessions= = = false
default-lock-timeout= = = 3600
xdbcore-logfile-path= = = /sys/log/xdblog.xml
xdbcore-log-level= = = 0
resource-view-cache-size= = = 1048576
extension= = = au
mime-type= = = audio/basic
extension= = = avi
mime-type= = = video/x-msvideo
extension= = = bin
mime-type= = = application/octet-stream
extension= = = bmp
mime-type= = = image/bmp
extension= = = css
mime-type= = = text/css
extension= = = doc
mime-type= = = application/msword
extension= = = eml
mime-type= = = message/rfc822
extension= = = gif
mime-type= = = image/gif
extension= = = htm
mime-type= = = text/html
extension= = = html
mime-type= = = text/html
extension= = = jpe
mime-type= = = image/jpeg
extension= = = jpeg
mime-type= = = image/jpeg
extension= = = jpg
mime-type= = = image/jpeg
extension= = = js
mime-type= = = application/x-javascript
extension= = = jsp
mime-type= = = text/html
extension= = = mid
mime-type= = = audio/mid
extension= = = mov
mime-type= = = video/quicktime
extension= = = movie
mime-type= = = video/x-sgi-movie
extension= = = mp3
mime-type= = = audio/mpeg
extension= = = mpe
mime-type= = = video/mpg
extension= = = mpeg
mime-type= = = video/mpg
extension= = = mpg
mime-type= = = video/mpg
extension= = = msa
mime-type= = = application/x-msaccess
extension= = = msw
mime-type= = = application/x-msworks-wp
extension= = = pcx
mime-type= = = application/x-pc-paintbrush
extension= = = pdf
mime-type= = = application/pdf
extension= = = png
mime-type= = = image/png
extension= = = ppt
mime-type= = = application/vnd.ms-powerpoint
extension= = = ps
mime-type= = = application/postscript
extension= = = qt
mime-type= = = video/quicktime
extension= = = ra
mime-type= = = audio/x-realaudio
extension= = = ram
mime-type= = = audio/x-realaudio
extension= = = rm
mime-type= = = audio/x-realaudio
extension= = = rtf
mime-type= = = application/rtf
extension= = = rv
mime-type= = = video/x-realvideo
extension= = = sgml
mime-type= = = text/sgml
extension= = = svg
mime-type= = = image/svg+xml
extension= = = tif
mime-type= = = image/tiff
extension= = = tiff
mime-type= = = image/tiff
extension= = = txt
mime-type= = = text/plain
extension= = = url
mime-type= = = text/plain
extension= = = vrml
mime-type= = = x-world/x-vrml
extension= = = wav
mime-type= = = audio/wav
extension= = = wpd
mime-type= = = application/wordperfect5.1
extension= = = xls
mime-type= = = application/vnd.ms-excel
extension= = = xml
mime-type= = = text/xml
extension= = = xsd
mime-type= = = text/xml
extension= = = xsl
mime-type= = = text/xml
extension= = = zip
mime-type= = = application/x-zip-compressed
extension= = = htc
mime-type= = = text/x-component
extension= = = xbl
mime-type= = = text/xml
extension= = = en
lang= = = english
extension= = = gzip
encoding= = = zip file
extension= = = tar
encoding= = = tar file
session-pool-size= = = 50
session-timeout= = = 6000
ftp-port= = = 0
ftp-listener= = = local_listener
ftp-protocol= = = tcp
logfile-path= = = /sys/log/ftplog.xml
log-level= = = 0
session-timeout= = = 6000
buffer-size= = = 8192
http-port= = = 80
http-listener= = = local_listener
http-protocol= = = tcp
max-http-headers= = = 64
max-header-size= = = 16384
max-request-body= = = 2000000000
session-timeout= = = 6000
server-name= = = XDB HTTP Server
logfile-path= = = /sys/log/httplog.xml
log-level= = = 0
servlet-realm= = = Basic realm="XDB"
welcome-file= = = index.html
welcome-file= = = index.htm
servlet-pattern= = = /Test
servlet-name= = = TestServlet
servlet-pattern= = = /oradb/*
servlet-name= = = DBURIServlet
servlet-pattern= = = /orarep/*
servlet-name= = = ReportFmwkServlet
servlet-pattern= = = /i/*
servlet-name= = = PublishedContentServlet
servlet-pattern= = = /apex/*
servlet-name= = = APEX
servlet-pattern= = = /images/*
servlet-name= = = IMAGES
servlet-name= = = TestServlet
servlet-language= = = Java
display-name= = = XDB Test Servlet
description= = = A servlet to test the internals of the XDB Servlet API
servlet-class= = = xdbtserv
servlet-schema= = = xdb
servlet-name= = = DBURIServlet
servlet-language= = = C
display-name= = = DBURI
description= = = Servlet for accessing DBURIs
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = ReportFmwkServlet
servlet-language= = = C
display-name= = = REPT
description= = = Servlet for accessing reports
role-name= = = authenticatedUser
role-link= = = authenticatedUser
servlet-name= = = PublishedContentServlet
servlet-language= = = C
display-name= = = Unauthenticated File Access Servlet
description= = = Servlet for files for unauthenticated users
param-name= = = RootFolder
param-value= = = /images
description= = = RootFolder
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = APEX
servlet-language= = = PL/SQL
display-name= = = APEX
database-username= = = ANONYMOUS
default-page= = = apex
document-table-name= = = wwv_flow_file_objects$
document-path= = = docs
document-procedure= = = wwv_flow_file_mgr.process_download
nls-language= = = american_america.al32utf8
request-validation-function= = = wwv_flow_epg_include_modules.authorize
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
servlet-name= = = IMAGES
servlet-language= = = PL/SQL
display-name= = = IMAGES
database-username= = = APS
role-name= = = anonymousServletRole
role-link= = = anonymousServletRole
allow-mechanism= = = basic
nonce-timeout= = = 300
xdbcore-xobmem-bound= = = 1024
xdbcore-loadableunit-size= = = 16
acl-evaluation-method= = = ace-order
############# XMLTYPE Tables #############
XDB has 1 XMLTYPE TABLES stored as CLOB
XDB has 24 XMLTYPE TABLES stored as OBJECT-RELATIONAL
XDB has 11 XMLTYPE TABLES stored as BINARY
############# XMLTYPE Columns #############
XDB has 3 XMLTYPE Columns stored as CLOB
MDSYS has 24 XMLTYPE Columns stored as CLOB
SYS has 1 XMLTYPE Columns stored as CLOB
ORDSYS has 9 XMLTYPE Columns stored as CLOB
############# XMLTYPE Views #############
############# XMLTYPE INDEXES #############
XDB has 1 XMLTYPE Indexes of type CSX
############# Items built with XML API's #############
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY MDSYS.SDO_WFS_PROCESS
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY FLOWS_030100.WWV_FLOW_DATALOAD_XML
PACKAGE BODY MDSYS.SDO_OLS
PACKAGE BODY FLOWS_030000.WWV_FLOW_DATALOAD_XML
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY FLOWS_030100.WWV_FLOW_XLIFF
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY FLOWS_030000.WWV_FLOW_XLIFF
PACKAGE BODY EXFSYS.DBMS_RLMGR_DR
PACKAGE BODY XDB.DBMS_XDB
PACKAGE BODY XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE XDB.DBMS_XSLPROCESSOR
PACKAGE XDB.DBMS_XMLPARSER
PACKAGE XDB.DBMS_XDBRESOURCE
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XMLINDEX
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA
PACKAGE BODY XDB.DBMS_XMLSCHEMA_INT
PACKAGE BODY XDB.DBMS_XMLTRANSLATIONS
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
PACKAGE BODY XDB.DBMS_XMLPARSER
PACKAGE BODY XDB.DBMS_CSX_INT
PACKAGE BODY XDB.DBMS_XMLDOM
PACKAGE BODY XDB.DBMS_XSLPROCESSOR
############# XML SCHEMAS #############
MDSYS has 4 registered.
EXFSYS has 2 registered.
ORDSYS has 17 registered.
XDB has 25 registered.
SYS has 43 registered.
############# Repository Resources #############
MDSYS has 9 resources.
EXFSYS has 3 resources.
ORDSYS has 20 resources.
XDB has 28 resources.
SYS has 12634 resources.
############# Network ACLs Configured #############
mail.4aps.be has network acls configured for ports 25 through 25
* has network acls configured for ports through
* has network acls configured for ports through
############# DBMS_EPG DAD USAGE #############
APEX
IMAGESHi Jules,
You need a user with XDBADMIN rights to access the WebDav. Once you have access, you can open the URL as webfolder (in IE).
Regards,
Christian
Maybe you are looking for
-
Font embedding and font fallback
I am attemping to use Myriad Pro as an embedded font in my Flex application. Unfortunately, this application must support international input and Myriad Pro does not have the necessary glyphs to display, e.g. Japanese. Text using glyphs not in the fo
-
Getting a XPRESS exception when clicking on add targets in metaview tab
Hi , i am trying to create an identity attribute in Metaview and at that time adding targets i am getting the follwing error XPRESS exception: Can't call method getObjectNames on class com.waveset.ui.FormUtil ==> com.waveset.exception.ItemNotFound: O
-
Running ABAP Report in background
Hello, I am getting timed out error when I execute my report program. I believd running the report can do it for now. Can you please tell me detils on how I should proceed on dev, qa and production environment. Regards, Sameer.
-
How do I disable Windows 8.1 Auto-lock
New Computer, Windows 8.1, 64-bit. How do I disable the Windows 8.1 Auto-Lock? I searched Forums, and the most popular answer was to go to User Accounts and Reset Security Policies. I went to Control Panel/User Accounts and there is NO option to '
-
Trial version of PS5 Extended w/ PS5 standard already installed?
Greetings - I've recently discovered some photo edting features using smart objects that - if they work as well as demonstrated - would be enough to get me to upgrade from the standard version of CS5 to the Extended version. Problem is that both vers