Files are skipped

Hi,
in my scenario where we used to process files of 300 mb of files.The file is split to 10 mb each using the scripts and then processed. Here like out of 30 files only 20 files are processed some of the files are skipped. No message is created in SXMB_MONI or there is no error in sender Communication Channel in RWB. all the files are archived in the archive directory. What may be the reason for not creating message.
With Pegards
Pradeep N

Hi,
This is very strange!
Did you checked message monitoring in adapter engine (not in integration engine)
goto RWB->Message monitoring->adapter engine and check messages for "Holding", "Waiting" "All containing errors" and "to be delivered" you must find your file/message there.
If no message is created in SXMB_MONI then it is clear they are somewhere in Adapter engine.
Regards,
Gourav
<i>Reward points if it helps you</i>

Similar Messages

ITunes Plus files are skipped

I've updated most of my iTunes purchases to iTunes plus and I saw the same long processing time that others saw. Mine all finished OK though. However some of them now will not play in iTunes and are just skipped over.
Strangely they will play in Quicktime and also in Get info->preview.
I also found that if I skipped the first second of the file (using iTunes->Get info->options) then the file played. Weird! Support let me download again and the latest copies were exactly the same. In the end they gave me a credit.
Anyone else having these problems? I had about 7 files out of maybe 30 or 40 gop bad. They were a variety of artists.
JohnK

My guess is that in the rush to get all the millions of tracks re-encoded, the record companies delivered some bad ones. Probably not surprising given the massive number of tracks involved. Even prior to the big iTunes Plus conversion, a bad track (or several) would appear from time to time. I would hope that at least the majority of tracks with problems will be replaced over the next several weeks. I'd suggest waiting a few weeks before you attempt to re-purchase these particular tracks, should you wish to, to allow time for them to, we hope, be replaced with good copies.

Files Are Skipped Upon Initiation of Playback

A lot of my files were displaying inaccurate time lengths and inaccurate bit rates for VBR files in my iTunes library on my PC until I used a program called VBRFix to solve this part of a problem. However, after running all of these files through VBRFix, the vast majority of them are now just being skipped when being attempted to play on my iPod (but not in iTunes on my PC -- in iTunes everything is fine). When I attempt to play them on my iPod, it just skips through all of the tracks on all of the affected albums and goes back to the iPod's main menu and does not play anything. Is there a way to fix this without having to re-encode every file?

I seem to have fixed the problem on my own. I deleted everything on my iPod and then copied all of the files in my library from my PC back onto it. I think that after I updated/fixed all of my files, the Sync feature wasn't detecting that these files were actually modified and left the old improperly-working, outdated versions of them on there.

Music Files are skipping

Hi,
I recently purchased the iPod classic (80G). Previously i had the iPod before.
It seems now that a lot of my music skips either back to the beggining or to the next track about 20-30 secs through the track. i Read on here that the way to combat this would be to convert all my files from AAC to MP3. I tried this and although it seems to have worked for many of my files, the files i have purchased on iTunes are 'Locked' stopping me from converting them. Is there a way around this? Also, is MP3 the best format to convert to? i'm not too woried about space but am about quality.
Also, the same thing seems to be happening to my movie files, some that i've purchased through iTunes and some that i haven't. What can i do about this?
Please help!

If you can't play the individual songs on the iPod (not skipping past sequentially in a playlist), that means the songs ae corrupt and you have to delete them and resync them to your iPod.

Metagen is skipped sometimes complaining because all output files are up-to-date with respect to the input files

Hi,
In one of my dll (VS2010), the process Skipping target "MetaGen" because all output files are up-to-date with respect to the input files.
it is at random. I have checked the time stamps of the dll and metagen.write.1.tlog both having the time stamp on the failed build. But all files in release folder did not have the same time. They are one hour earlier than the dll
and the metagen.write.1.tlog.
On the good build it said the input file is is newer than output file ".\Release\\metagen.write.1.tlog" and allfiles in the release folder have same time stamp.
Any clue to solve this ?
Regards,

Hi,
Based on your post, I am not very clear about your issue. I feel your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Could you please provide us more information so that we resolve your issue better?
What type of project are you working with? C++ MFC project?
How was the
metagen.write.1.tlog file generated in your project?
What error messages did you get?
What is the 'input file'?
If possible, please provide us a sample project to reproduce your issue.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AppleScript to skip Automator workflow step - when no files are provided

My current Automator workflow:
Get Specified Finder Items (path to folder auto-populating with images from a camera)
Get Folder Contents
Sort Finder Items - by Creation Date in descending order (gets oldest item first)
Limit Number of Items - Limit to First 1 items
Move Finder Items (If no items are passed to this step skip it)
Loop - Automatically; Stop after 20 minutes; Use the original input
What I am trying to accomplish:
I'm trying to write an AppleScript to skip the "Move Finder Items action" when it is not supplied with any files (from the previous workflow step), moving on to the next step which is a loop to begin my workflow again.
Big picture:
I have a workflow, where I am moving files from one folder to another folder (one at a time). When the input folder is empty, Automator comes back with "No item references were passed to the Move Finder Items action (-50)"; which it should - because it is not passed any files. I would like to ignore this error (or skip this step) and continue with the workflow if no files are provided to the "Move Finder Items action". I currently have an AppleScript (see below) that stops the workflow when this error occurs, but I would like to have this flow continue, not stop.
AppleScript:
on run {input, parameters}
          if input is {} then error number -128 -- 'user cancelled'
          return input
end run
Please help me create a script to skip this step, or to restart the Automator workflow when no files are passed to the "Move Finder Items action".

I'm not aware of a way to do this with a workflow saved as an application, but Automator is scriptable, so you can manipulate a workflow document. For an example, build the follwing workflow:
Ask for Text (just to get some input)
Run AppleScript:
on run {input, parameters}
set currentAction to index of current action of front workflow -- the most recent completed action
if input is {} then -- if no input then disable the following action
    tell Automator action index (currentAction + 2) of front workflow to set enabled to false
else -- enable it
    tell Automator action index (currentAction + 2) of front workflow to set enabled to true
end if
return input
end run
Ask for Confirmation (just to show a dialog when enabled - this action will be enabled/disabled based on the text input)
Loop
You can also use action names, but I think it is less confusing to use indexes, since names can be edited and an action can be used more than once.

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone.

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone. i have tried the following:
1) Removing all music from phone and resynced to iTunes PC library.
2) Erased phone and restored from back up
3) Erased phone and started as a new iPhone
4) Reformated the music files in my library that weren't playing
5) Deleted songs from iPhone and computer and re-imported CDs
6) Tried to redownload my COMPLETE MUSIC LIBRARY from iCloud.
7) I have also turned it off and turned it back on several times
8) I tried syncing through my macbook (only moved partial songs to it to see if it would even work).
9) I have tried to get Siri to play them, did not work.
10) All music does play fine on my iPod Touch 3rd (iOS6 i think) gen and iTunes on Mac and PC
11) I added a CD to my roommates iTunes and it plays on their iPhone 5S but not mine.
After all of these things it is now WORSE!!! My iTunes purchased songs are now experiencing the same issue along with some (not all) of the original music files that were skipping and grayed out. My conclusion is i have no clue at this point! I have done everything i have found online in EVERY discussion, i have spent over 60 hours trying to get this to work and i am asking myself, i bought this product why am having to fix this when it worked just fine on my iPod touch (3rd Gen) and iPod Classic!!!! PLEASE APPLE FIX THIS ISSUE FOR US!!!!

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

After updating to iOS 6.1.5 on my iPod Touch 4th Gen, Some of my songs are skipping to the next song after 30 seconds of play...

After updating to iOS 6.1.5 on my iPod Touch 4th Gen, some of my songs are skipping to the next song after 30 seconds even though the iPod appears to be playing the current song. Some of my songs are mp3 files that have been playing fine for years...
Anybody else experiencing this issue?
I'm using the latest version of iTunes and i don't have that problem on my PC. The only difference as far as i can tell is the updated iOS & firmware...
AJ

Yes, other have. If the songs play OK in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I had to reload all my programs after a hard drive problem. Now certain songs are skipped over or only play for a sec or 2 then it jumps to next song. all songs played before. Some are Itune bought and some are my old music.

I had to wipe my hard drive clean and reload all my programs. After reloading Itunes, I noticed that some songs will not play, they are skipped over, or the songs plays for 1-2 secs then it skips on to next song. Any ideas what I did wrong? All songs played before and some of affected songs are bought, some are my old library I copied off of CDs

TimT wrote:
I had been thinking that the hard dri've is starting to fail on me but then I thought about the fact that, If I play an MP3 and the player freezes up or starts jumping through the mp3 file, Then I restart the player and start the same MP3 agian and this time it plays normally, Is it really a hard dri've problem?
Could be a lot of things unfortunately, from corrupt firmware, corrupt format on the disk, a problem with the mainboard, or a problem with the hard disk.
I figure that if the hard dri've was damaged it would always freeze up on the same file at the exact same point in the music wouldn't it's
Not necessarily. It could be just an intermittent fault.
I want to Format my Zen Touch and reload the Firmware to start from scratch, but I first want to backup my 28 GBs of MP3 and WMA files. However I noticed that when I transfer the files to my hard dri've, all the ID3 Information is gone. Now adding ID3 info to 28GB of files will take days!
Strange. Did you edit the tag data on the player? If so what happens is the tag data changes are made in the Music Library but not in the files themselves. There's only one way to write the changes back and this involves getting a copy of MediaSource 3. You then transfer the files back to the PC Music Library, and use an update function to update the files (the PC Music Library will have the same tag data as the Music Library on the player). One problem is that MediaSource 3 is very large, and not available from Creative as a download. I can try and get a copy to you if you can't find it elsewhere.

Deduplication: how to identify which files are "in-policy" (and which are not)?

Dear experts,
in eventlog I find the following information for one of my deduplicated volumes:
Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
Error code: 0x0
Error message:
Savings rate: 24
Saved space: 853327714684
Volume used space: 2681869406208
Volume free space: 66771247104
Optimized file count: 1199618
In-policy file count: 1188049
Job processed space (bytes): 0
Job elapsed time (seconds): 2
Job throughput (MB/second): 0
Some things look strange to me:
- The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
- The "Optimized file count" is higher than the "in-policy" file count.
- The volume has about 3.5 million files but only 1.1 million files are "in-policy".
My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
excluded file extension (nothing configured here apart from the default). Right?
I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
Is there any way to identify the files (full path) which are considered to be not "in-policy"?
How can I find out if the optimization process really looks at all files - and doesn't skip a million?
Thanks!
Regards
Christoph

Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
- created a brand new empty volume (x:) on the same server
- enabled data deduplication on that volume with a minimal file age of 0 days
- copied about 2GB of data from the problem-volume in 15450 files to this new volume
- started "Start-DedupJob x: -Type Optimization -Memory 50"
After a few seconds that job completed and I got the following result:
Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
Error code: 0x0
Error message:
Savings rate: 0
Saved space: 12360718
Volume used space: 3091664896
Volume free space: 7610097664
Optimized file count: 153
In-policy file count: 153
Job processed space (bytes): 46095214
Job elapsed time (seconds): 9
Job throughput (MB/second): 4.88
The question is: why are only 153 files in-policy?
All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
(minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
(Or is something going wrong on my server?)
Kind Regards
Christoph

ITunes Videos (Both Movies and TV Shows) are skipping/ studdering.

iTunes Videos (Both Movies and TV Shows) are skipping/ studdering.
These videos were taken from my hard drive, converted with Format Factory, then placed in itunes.
ON ipad the videos playback perfectly, but in itunes itself it fails drastically.
Same problem happens with quicktime. If i open these videos up with quicktime, it studders and skips, while if i open it with VLC, it works fine.
I have already disabled 3d acceleration, which helped a very small bit.
The Rest of itunes runs smoothly, just video playback is screwed
Specs:
HP Envy 14
Intel i5 quad core processor 2.53 ghz
6 gb ddr3 ram
Windows 7 Home Premium 64-bit
Itunes 10.5.1
Quicktime 7.7.1

Update
It turns out that the reason for not playing TV shows and movies is not the network.
Something happened with the files while copying them from the Macbook to the NAS station.
I noticed that after copying a TV show from the NAS Station back onto the Macbook Air drive; it was not possible to import that file into iTunes. iTunes ignored importing that file.
On the other side the TV shows will be played by Quicktime, either from the NAS station or from the Macbook.
It might be important to mention that the NAS station is not OSX formatted.
Does someone know what happened ?
Regards

"Backup cancelled because all files were skipped"

Hi
I am performing database backup using the following command:
run {
allocate channel c1 device type disk;
backup incremental level 0 database plus archivelog delete input;
release channel c1;
restore database validate;
upon checking the RMAN logs, it finishes and I can tell that it is a good backup. I can also list the backup pieces that had just been backed up. after this step, i want to backup the flash_recovery_area to tape, i used this command:
run {
allocate channel t1 device type sbt;
BACKUP RECOVERY AREA;
DELETE OBSOLETE DEVICE TYPE sbt;
release channel t1;
when i do this, i get this message from the logs, and i dont see any backups on tape:
------LOGS-------
allocated channel: t1
channel t1: SID=503 device type=SBT
channel t1: Oracle Secure Backup
Starting backup at 23-JUL-11
Specification does not match any archived log in the recovery catalog
Specification does not match any datafile copy in the repository
Specification does not match any backupset in the repository
backup cancelled because all files were skipped
Finished backup at 23-JUL-11
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
no obsolete backups found
released channel: t1
RMAN>
i dont understand why i am getting this message where in fact, i have archivelog, datafile and backupset backed up in my FRA. Any ideas?
Thanks!

Hi Oracle ACE,
Here is the outpur Sir:
RMAN> show all;
RMAN configuration parameters for database with db_unique_name PROD are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'C:\oracle\flash_recovery_area\PROD\AUTOBACKUP\%d-%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 2 G FORMAT 'C:\oracle\flash_recovery_area\PROD\BACKUPSET\%d-%T-%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE COMPRESSION ALGORITHM 'BZIP2'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SNCFPROD.ORA'; # default

TS1424 the tracks are skipping on the last two albums i purchased on itunes. it isn't a disk problem. definitely in the download.

the tracks are skipping on the last two albums i bought from itunes. it isn't a problem with the disk burning, when i play the albums in itunes the skips are even though it said the dowload had been successful.

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

MDT2012 Upd1 - Settings in rules file are not reprocessed after selecting another TS

We use MDT 2012 Update 1 and we have several tasksequences.
I found an article on how to use different settings per task sequence (from Mike Walker). This works fine.
So, when I select a task sequence and click next to go to our next screen in de Windows Deployment Wizard (the Computer Details) the settings are correct.
Unfortunately when I click back in the Windows Deployment Wizard to go back to the task sequence screen and change to another task sequence, the old settings are still visible in the Windows Deployment Wizard.
Is it possible to clear the settings and to reprocess the rules file?

Yup, that's a problem. when parsing CS.ini, there are some variables that are skipped if they have already been added. If you create CS.ini that will populate the TimeZone, If you go back and re-run the cs.ini, TimeZone won't get set again, because it's
already present.
Instead I would recommend using the Johan Method:
http://www.deployvista.com/tabid/36/EntryID/139/language/en-US/Default.aspx
That will *NOT* allow you to get settings within the task sequence, but hey...
IF you need to reset the Task Sequence, you can create some code in the TS selection Wizard Page to delete a set of variables whenever it's entered.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

My songs are skipping in i tunes when i am playing games or moving the mouse doing other things and only happens on computer not my devices

My songs are skipping in itunes and it is just on computer and happens when i burn to cds songs skip. My other devices the songs don't skip. And skipping is when i am playing a game or moving mouse and checking on something and it is most of songs.

Hello Cathy 21084,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting songs that skip
http://support.apple.com/kb/ts3217
Make sure song files are not damaged
If a specific song skips when you play it, it may be damaged.
1. Delete the song and update your iPod.
2. Insert the CD you used to import the song and import it again. If the CD is scratched or dirty, iTunes may not be able to import the song. Try cleaning the CD or use a different one. If the song was imported or created using a third-party application, try the following:
Use iTunes to import the content directly from the CD.
Convert the content to an iPod-compatible format using iTunes.
3. Update your iPod with the new copy of the song.
Best of luck,
Mario

Files are skipped

Similar Messages

Maybe you are looking for