Files beginning with _ in unknown folder ?!?!
Hey guys, I went home this weekend and put all my cd's onto my harddrive to then put on my sandisk, fun fun fun! First of all Apple are such bastards that i then had to convert my audio files to MP3. ok fine, done, dragged and dropped all my music easy enough onto my sandisk and the files work and are all in numerical order in their own nice folder. BUT !!! i have an unknown folder with basically all my files in it that are not even 5 seconds long (so its really hard to delete them from the device) and the file names all start with an underscore like this _ when i plug my sandisk into my computer i cant find any of these files to delete. So frustrating for someone like me who is very serious about organisation! Hope this makes sense and someone can please please please help me!
Send your thank-you letter to Apple.
First of all, when you're ripping albums you can go direct to mp3. Importing Settings shows up in iTunes when it lists the tracks of an album--down on the lower right in my Windows version, but Apple likes to move things around. That way you can rip directly to mp3 instead of converting. Use Custom and 320kbps for the mp3 settings--lower bitrates were for the days of more limited storage.
Now about your itty-bitty files...
The Unknown folder you are seeing is not really a folder. There is no folder called Unknown on the Sansa. Unknown means unknown artist because the Sansa makes Artist, Album, etc. listings from information gathered from ID3 tags, electronic labels in the files.
Now, those files that start with underscore (actually period underscore) aren't really mp3 files and don't have tags--so they pop up as Unknown. If you really like to go by actual folders, you can scroll down to the end of Music and see Folders--those are actual folders, not tags.
But what are those Unknown thingies?
Well, when a Mac rips a CD, it creates the music files (for example 01-First Song.mp3) but also makes a Finder file that the Mac uses to locate things, and the Finder file for that song is ._01-First Song.mp3. (starts with period underscore). Then, because the Mac calls the finder files .mp3, the Sansa thinks they are music files. So cute.
You can just get rid of all of the Finder files from the Sansa, which doesn't need them. If you're on Apple your Sansa is probably connecting in MSC mode and you should make that permanent--Settings/System Settings/USB Mode/MSC. (MTP is to connect to Windows Media Player, Auto switches between them and makes trouble).
Now look into your music folder on the unit or card and do a search for files with ._ in them. Maybe you have a setting somewhere in the MAC to show hidden files or something--try Help. The Finder files are often in folders called MACOSX within the album folders, so you can also search the Sansa for MACOSX. All the Finder files are 0kb, so you can also sort by size. When you find them, you can happily delete all of them from the Sansa. DS_Store files can also be deleted.
If your Mac just refuses to show the Finder files-I'm not sure, I'm in PC world--then make sure USB Mode is MSC (as above), find a pal with a Windows computer, connect and search and delete them from the Sansa.
Mac people have written here about a program called Hidden Cleaner that does this automatically--you might try it.
http://alternativeto.net/software/hiddencleaner/
Similar Messages
-
My files no longer sort properly - files beginning with AEIOU come before
My files no longer sort properly - files beginning with AEIOU come first after numbers and special characters, then letters H, K, M-N, P, W, B-D and so on. I click on the column header again and it reverses the sort, but still messed up. This convoluted sort appears in all views. All the letters are grouped together, so all the "a"s, "e"s, etc are being sorted by some algorithm, but it's not alphabetical. I noticed it after installation of Snow Leopard, but it could have been that way before. I did a wipe and load and just imported user settings from Time Machine afterwards. Any suggestions on how I can fix this?
Usually, it is (1) a preference file located here
<user home folder>/Library/Preferences/
In this case, the problem is not just Finder if it also happens in Mail. Unfortunately, there are a lot of preference files.
Or it is (2) a background process that runs when you log in to your account. If it is something that starts automatically, it may be one of your Login Items. You can look at System Preferences Accounts pane +Login Items+ tab. That list shows processes that run when you log in to that account. If you see anything that you no longer need, you should remove it. Look for anything there that might, for whatever reason, change the alphabetical sort order.
Make sure English is selected as language in System Preferences +Language & Text+ pane. It seem improbable that it would not be, but I just noticed there is a setting at the bottom of that pane that says +Order of sorted lists+. Does that have something other than English ? -
Renamed file beginning with dot (.)
Hello,
I created and accidentaly renamed a file "htaccess.txt" to ".htaccess".
I learned that files beginning with . are reserved for the system are thus not visible on the desktop… the file dissapeared
How can I do to view it ? I just want to rename or delete it.
Regards,
NicolasAnd just to add, you do have to be in the current directory that the hidden file is in to use those commands (Well not really, you can use an absolute path beginning from the root of the drive, but too prone to nasty mistakes.
Say the file is is your user folder in Documents.
When you first go into the shell, You will already be placed in YOUR users directory.
so if you do this command (Print working directory)
pwd
you will be returned with
/Users/username (Username is a placeholder for your users SHORTNAME)
So then you would just use the CD (Change directory) command
cd Documents
and if you do a pwd again you will get
/Users/username/Documents -
I've been using a script to use automator to create a folder from the filename and put that file into it the folder just created.
I have a bunch of files that have similar names to them, but I don't want every file to be put into its own folder, instead I want all files with the same suffix (001) to go into the same folder. I would also like the folder name to just be named the same as the suffix (001) instead of the full file name.
For example all of these files names that end with the same integer (001) should be dumped into the same folder named "001":
Boston_ProRes422_1920x1080_24p_Audio_001
Boston_ProRes422_3840x2160_24p_Audio_001
Boston_ProRes422_3840x2160_24p_RAW_Audio_001
Boston_ProRes422_1920x1080_24p_Audio_002
Boston_ProRes422_1920x1080_24p_Audio_005
Boston_ProRes422_1920x1080_24p_Audio_010
Any help at all would be incredible!!
Thanks!
Here's the script I'm using right now:
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolderThanks Neil for the response! That script didn't work, but I did get it to work with my old script by changing "set TheName to" numbers different. Here's my final script which creates folders named "001", "002", and so forth and dumps in the files that end in that same suffix in the matching folder.
on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
set {theContainer, theName, theExtension} to (getTheNames from anItem)
try
set destination to (makeNewFolder for theName at theContainer)
tell application "Finder"
move anItem to destination
set the end of the output to the result as alias -- success
end tell
on error errorMessage -- duplicate name, permissions, etc
log errorMessage
# handle errors if desired - just skip for now
end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
set theContainer to the path of the container
set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
set theName to text -5 thru -((count theExtension) + 4) of theName -- just the name part
set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
return (theParent & theChild) as alias
on error errorMessage -- no folder
log errorMessage
tell application "Finder" to make new folder at theParent with properties {name:theChild}
return the result as alias
end try
end makeNewFolder -
Some files downloaded with incorrect filename Unknown
When I go to the Sony website to download a new firmware for my TV, clicking on the "Accept" button to download the file should download a file called firmware.upd. This works fine in Firefox, but in Safari, it names the file "Unknown" (although the file size is correct). Is this a bug in Safari, or something that's gone wrong with my particular copy? Here's the page if anyone wants to test...
http://support.sony-europe.com/tvhc/downloads/downloads.aspx?site=odwen_GB&f=FWBraviaM8722&ch=6&m=KDL-26EX302Hi
just rename the file to firmware.upd, it seems that sony's ftp server doesn't play quite right with Safari, or vice-versa.
Finder does show the right name, and transfer the file with it... so you could enter
ftp://ftp.vaio-link.com/PUB/TV/M8722/
into Finder-Go-Connect to Server, and connect as a guest, then drag the file anywhere you like, (or any ftp client) but it's the very same file, so rename is quicker. -
Temporary files beginning with "aa" created(?) by Illustrator
Using Illustrator CS5, i'm noticing some files names "aaxyyyyy" with no extension (where xyyyyy is usually something like "r09035", a letter and then 5 numbers). I'm pretty sure Illustrator is creating these files.
What are these files?
Is it safe to delete them?
Thanks,
SteveHi Mike,
Thanks for your reply.
The grid (chart) that highlights correctly is created from another program which is no longer viable, and as I need full control over the drawing, creating fields in Acrobat is not an option.
This grid (chart) created in Illustrator CC will be used in InDesign where ultimately a .pdf is created and viewed by clients in print and on screen (mac, pc, unix, and mobile devices). It's very helpful for users to highlight and mark their place on the chart as they read it to keep their place. Sometimes clients use a 3rd party .pdf reader to accomplish this. Long story short, the program we were creating these charts with is no longer viable, and are now testing Illustrator to create charts which is perfect except for the highlighting flow issue. -
IOS 7 Pages file missing because name begins with '.'
I updated my iPad mini to iOS 7 and then updated Pages to the latest version. The prior version of Pages allowed me to name a file beginning with a period ('.'), but in the new version this isn't allowed and I cannot see my file. This is a very important file for me so I really need to be able to recover it. I haven't found any file manager type programs that will allow me to see it and rename it.
Any ideas?
Thanks.Yes, this is so true! I was hoping it would be fixed with the iOS8 release and iCloud Drive, but sadly that has not happened.
I could live with a keyboard shortcut, but you cannot expect me to scroll down just to add an item if I want to use this a lot on the web (which I would like to do). -
Where do I find the files downloaded with Firefox on my harddrive?
Where are the downloaded files stored on my hard drive so I can access them?
You can find the files downloaded with Firefox in '''Downloads''' folder.[Default]
{for e.g. C:\Documents and Settings\User\My Documents\Downloads }
OR
On Downloads window , right click on the file and select '''Open Containing Folder'''. -
What is a file that begins with ._ ?
A client just sent me some files that begin with ._ in the extension.
(Client claimed they are vector files for a video project)
I tried to download and Mac told me they are system files and will be hidden.
sure enough they didn't show up my desktop. I download again adding a " to the front of the extension. I got the file on my desktop- but it would not open.
I trashed it.
I then did a spotlight system search for the ._ files I think I download and I got no result.
I'm now worried.
Are these ._ somewhere on my system?
Can they do harm to the system?In Unix the initial period in a filename causes the file to become invisible. Spotlight's default configuration will not locate invisible files. If the files are downloaded to your Downloads folder or to your Desktop then you can make them visible in a number of different ways.
1. Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
2. Open the Terminal application in your Utilities folder. At the prompt enter the following commands pressing RETURN after each. I will assume for the purpose of illustration that you have downloaded the files to your Desktop.
cd /Users/yourusername/Desktop
mv ._filename.ext filename.ext
This will rename each file to the same filename but without the initial "._". Repeat the "mv" command for each file substituting the actual filename.ext for the "filename.ext" in the command line. If you have downloaded the files to a different location, then substitute the full path to that location in the "cd" command line.
3. Download a utility such as Batch Rename'Em from CNet Downloads or MacUpdate and use it to mass rename the files by removing the initial "._".
4. Have your client rename the files before sending them to you by explaining that they are invisible on the Mac with the initial period in the filename.
5. Configure Spotlight to search in system folders and to display invisible files in search results.
6. Download Easy Find - CNet Downloads or MacUpdate - and use it instead of Spotlight.
Message was edited by: Kappy -
I was attempting to organize my files in Reader (on iPad) and I tried renaming an existing file to begin with "." in an attempt to put it at the top of my list, so that I could easily find it. It completely diappeared and if I search for it, it doesn't appear. Help!!!
Hi,
A file or folder name starting with '.' ("dot" or "period") is considered hidden on most operating systems. By naming a file starting with '.', you accidentally hid the file and made it inaccessible to all iOS apps.
I'd highly recommend using '_' ("underscore") in the future.
We have already made the change to the new Acrobat DC for iOS app (version 15.0.x) so that it disallows the rename operation with '.' as the first character. (I assume that you are using Adobe Reader for iOS on iOS 7 or older iOS version.)
To recover your hidden file, you need to use a Windows or Mac desktop/laptop computer, install a File Manager app (e.g. iExplorer free demo version, iFunBox), connect your iPad, browse the file system on your iPad, and rename the file back to something else (so that it becomes "visible" again).
The exact steps vary depending on the File Manager app you choose. You may be able to find How-To videos on the software manufacturer's web site or YouTube.
Don't worry. Your hidden file is not permanently lost. You just need to recover it. Good luck! -
I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
BillI took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
> -
The dmg files have downloaded to the wrong folder - not finished with the install process
The dmg files have downloaded to the wrong folder - I am at the part of the download/install process where the "Welcome" screen appears asking for me to agree to the license agreement. Somewhere on your site, I read that they should NOT go to the applications folder but to the "Users" folder. Can/should I move/drag the folder with the dmg files into the "Users" folder"? If so, before or after I complete the install? I am running MAC OSX 10.7.4 on a MAC Mini.
Also, when the trial period is over, I will use the license number for the purchased software disks, should the dmg's/folders then be moved to the application folder or stay in the "users" section? I have Purvhased Adobe Photoshop Elements 10 and Adobe Premiere Elements 10, but somewhere on your site it was suggested to download them instead and use the license code at the appropiate time. If someone can help with these questions, I would appreciate it. Thank youHi,
In the Welcome screen, you can accept the license agreement and can go ahead with the installation. You will be asked for the serial number. If you don't have one, install it as a trial application. By default, it's installed in the Applications folder. However, you can change the installation folder in the third screen, if you have a reason. Please see the screenshot below:
After installing, you can't move application to a different directory by dragging. You need to uninstall and install it again in the folder of your choice.
Thanks,
Sunil -
File name with symbols won't delete from trash.cache\trash\cache folder.
found this weird file name with symbols (squares nad the like) in the trash.cache\trash\cache folder. Can't seem to delete it from windows, can't get at from the dos prompt. Windows safe mode won't delete it.
Any suggestions as to what it is and how to get rid of it.
At present am trying reinstall of firefox and virus scan.
Thanks
PeterI tried to do the instructions Adobe gave me but when
I put in the disc that came with my mac and hold down
C when it restarts it takes me to the screen to do a
fresh install.
At that point go to the Menu & select Disk Utility - I can't remember exactly which menu but you should be able to find it easily... there isn't too much there
I went into the disk utility through the Apps folder
and for somereason the option to repair isnt
highlighted and it wont let me click it. I tried to
repair permissions/verify but it doesnt change
anything. I looked at the info and it says the volume
can be repaired, but it wont let me.
You can't Repair the disk the system is currently running the OS from - That's why you have to boot from the Installer disk (or some other start-up disk). Repair Disk addresses directory structure issues - totally separate from what Repair Permissions does.
HTH|:>)
Bob J. -
Find and replace with multiple files and with a watch folder
I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakersWhen you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace -
I have been getting the MSVCR80.dll missing message.
Been on the Apple site and following instruction.
Going down the list has instructed I have Deleted I Tunes.
Deleted Apple Software Update
But when I try to delete Apple Mobile device it wouldn't delete so went into program files has the instructions say by going to Program Files\common Files\Apple\Apple Mobile Device Support Folder.
It still wouldn't delete saying it was being used.
I opened the file and highlighted all the folders and pressed delete, most of them have disapeared into my recycle bin but the folder still holds AppleMobileService, AppleMobileDeviceService_main.dll and MobileDevice.dll.
Message when I right click the first file is AppleMobileService I am told this action can't be completed because file is open in Apple Mobile Device. Close and Try again.
When I click the next file AppleMobileDeviceService_main dll it says It comes up with This action cannot be completed and File description Apple Mobile Device Service. Company Apple Inc. File Version 17.323.0.9 Date Created 7/9/2013. Try again...... and finally MobileDevice.dll come up with same message but file version 710.0.0.4 Date Created 7/9/2013 Size 902KB Both say Try Again but the same thing just recurred.
I have left my lap top on hoping that I a swift reply.
I am certainly no computer wizard and simply trying to follow the instructions to get rid of the box which keep coming up everytime I switch the lap top on saying APS Daemon.exe-System Error. The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I had looked at the internet and there appears to be warnings not to click on the button.
I have had an apdate from Apple for the I Tunes but it wouldn't update. I thought that may have sorted it so whilst I had a few hours I thought I would go through the process that is advised on Apple's website.
I hope I have not ruined my computer. I haven't even tried deleting Bonjour or Apple Application Support (I Tunes 9 or later) has these are supposed to come after the step I am on.
Please HELP!!!!!Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
"Ghost" copies of iTunes Library on hard drive?
I was just doing some routine file maintenance when I discovered that I have two directories of music on my hard drive. The first directory is exactly where my iTunes 9.1 preferences is set to store my media libary: Users/Home/Music. The second direc
-
Hi everyone. So I just noticed that one of the screws from the bottom of my MacBook Pro is missing. I am looking for it everywhere (I know a certain room where it has to be since it was in there when I set the computer down and out when I picked it b
-
Deleting mailbox without removing user object? Exchange 2010
In Exchange 2010, How can I delete a mailbox but keep the User Object since this user still access the network??
-
Is there a technique for restoring a missing app ie facetime to the ipad?
Is there a method for restoring a missing app to the iPad?
-
Username not displayed when afp login
Greetings I have a osx yosemite server hosting /Volume/HD/Groups & /Volume/HD/Users when a user logs in, traditionally they would see their personal folder as an option. after credentials have passed the user is only presented with 2 options; Users G