Files being overwritten

I just upgraded to Dreamweaver CS3 from MX 2004. I have the
following enabled for my site definition: Maintain synchronization
information; Enable file check in and check out; and Check out
files when opening. The problem is, every time I open a file
locally, it automatically and instantaneously gets overwritten by
the remote file. This did not happen with MX 2004, and this has
caused many problems for me. Is this supposed to be happening, or
do I have a problem here? I've tried disabling Maintain
synchronization information, but this doesn't change anything. Any
and all help is greatly appreciated.

> Isn't that the point of the
> synchronization feature - to alert you when your files
are not synched and
> then
> let you choose what you want to do?
If you are using checkin/checkout, the remote site is the
gold standard for
all checked-in files. Thus, overwriting your local copy is of
no
consequence, since you cannot have made changes to the file
after it has
been checked in. It would be unnecessary for DW to ask if you
want to
overwrite it, because DW assumes that you know it will be
overwritten by
virtue of the fact that you have just initiated a checkout
operation. Get
it?
> If a co-worker checks
> out a file, makes a change to it and checks it back in.
I can then check
> out
> that file and make changes of my own and check it back
in, right? Am I
> misunderstanding you on that?
Your understanding as expressed in the first two sentences is
absolutely
correct.
If your co-worker checks out a file, you cannot check it out
until it's
properly checked in by your co-worker. Once the file is
checked in, you can
then check it out.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"akirell" <[email protected]> wrote in
message
news:[email protected]...
> If the automatic overwriting of files upon opening has
always been, I
> never
> noticed it. I have always had file check in/check out
enabled, yet never
> experienced my files being overwritten until CS3. The
specific problem
> with the
> file being automatically overwritten is simply the fact
that I feel I
> should be
> asked first if I want to overwrite the file. Isn't that
the point of the
> synchronization feature - to alert you when your files
are not synched and
> then
> let you choose what you want to do?
>
> Also, you said if a file is properly checked in, then I
will not be able
> to
> make any local changes. That doesn't make sense to me.
If a co-worker
> checks
> out a file, makes a change to it and checks it back in.
I can then check
> out
> that file and make changes of my own and check it back
in, right? Am I
> misunderstanding you on that?
>

Similar Messages

  • New files being overwritten by FTP cache

    I have Dreamweaver set up to connect to my ftp server; there are about 100 sites in my /sites/ directory that I access to make changes to.
    On one site, whenever I open a file and edit it, all of the related files on the server are overwritten with old files being pulled from *somewhere* when I save the file.
    I'm guessing Dreamweaver has a cache of files from the FTP connection that it's pulling from; my question: How do I either a) disable caching or b) update the local files?
    And telling me to set each individual site up in DW is not helpful - there are just too many sites, that's why I use the FTP connection to pull the files I need directly.

    I have Dreamweaver set up to connect to my ftp server; there are about 100 sites in my /sites/ directory that I access to make changes to.
    On one site, whenever I open a file and edit it, all of the related files on the server are overwritten with old files being pulled from *somewhere* when I save the file.
    I'm guessing Dreamweaver has a cache of files from the FTP connection that it's pulling from; my question: How do I either a) disable caching or b) update the local files?
    And telling me to set each individual site up in DW is not helpful - there are just too many sites, that's why I use the FTP connection to pull the files I need directly.

  • Downloaded files being overwritten

    The browser (Firefox Browser for Android 20.0.1) itself is great, but I have one problem. When I download a file (and I do this rather often) after closing browser and opening it again, Firefox starts to re-download the same file. It wouldn't be a problem if the file which has been already downloaded earlier wasn't being overwritten.
    But it often happens that instead of the full file, ie 460mb, I discover that my file is incomplete, of a size of several kbs. Does anyone know how to fix this problem?

    The browser (Firefox Browser for Android 20.0.1) itself is great, but I have one problem. When I download a file (and I do this rather often) after closing browser and opening it again, Firefox starts to re-download the same file. It wouldn't be a problem if the file which has been already downloaded earlier wasn't being overwritten.
    But it often happens that instead of the full file, ie 460mb, I discover that my file is incomplete, of a size of several kbs. Does anyone know how to fix this problem?

  • Project files being overwritten in Captivate 5

    When we create a new project in Captivate 5 and save it we do the following:  "File", "Save As" and choose our preferred location which happens to be a folder on the local desktop.  The next project we create and save we go through the same process but, of course, change the name of the file.  The problem we are having is that it overwrites the previous file and we never end up with more than one captivate file in that folder at a time.  The previous files are overwritten and gone.  Is there a setting that I am unaware of that is causing this or do I need to open a support ticket?  Anyone encounter this previously?

    In my first days of playing around with CP5 I lost all files in a folder into which I saved the CP5 project (I had to restore all of them from a backup that I -thanks god- created just before that).
    Then I created a separate folder dedicated only for CP5 project files and published files. Since then no files have been lost - but I don't know the reason why.
    So I'm also very interested in some detailed information on when files are deleted from the target folders by saving or publishing CP5 projects.

  • UCCX 7.1 Holiday.xml file being overwritten with older file

    I'm administering a UCCX server v7.1 in which the holiday.xml file in the wfaavid\documents\user directory keeps resorting to an older holiday.xml file after I manually copy an updated file into the directory. When I initially copy the file over, our Contact Center identifies the holidays fine. I find each holiday there after, an older version of the file with older dates appears. So I have to manually copy the file to the directory again that holiday morning. I'm assuming the switch occurs before hand but not sure when or why. Is there another directory I'm missing that I should be copying the updated file too? Or is there another explanation that is causing this issue?
    Any help would be appreciated.

    That local directory is overwritten by the document in the repository (in the database).
    That's working as designed.  You'll need to leverage the web page AppAdmin to update your XML file, or do it from within a script with the Upload Document step.  Those are the only two supported methods.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Variable being overwritten in the Variable Substitution (File Adapter)

    In the File adapter Receiver Communication Channel, I am using variable substitution.
    The problem is that the first variable I use (userid) is being overwritten by the second variable (filenumber). How can I fix this problem?
    File Name Scheme: %userid%_%filenumber%.xls
    Target XML:
    ============
    <?xml version="1.0" encoding="UTF-8"?>
    <Workbook xmlns="urn:schemas-microsoft-com:office:spreadsheet" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:html="http://www.w3.org/TR/REC-html40">
    <Worksheet ss:Name="FileName">
    <Table x:FullColumns="1" x:FullRows="1">
      <Row>
        <Cell><Data ss:Type="String">0209519</Data></Cell>
        <Cell><Data ss:Type="String">32226v2 v1.1</Data></Cell>
      </Row>
    Variable Substitution:
    =======================
    userid          payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,1,Data,1
    filenumber    payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,2,Data,1
    Expected Output:
    ==============
    0209519_32226v2 v1.1
    Actual Output:
    ============
    32226v2 v1.1_32226v2 v1.1
    Thanks for your help.

    Thank you for all your suggestions. I decided to modify my target XML and concantinate all the fields into one string so I don't have to worry about the variables being overwritten in the variable substitution.
    Target XML:
    ============
    <?xml version="1.0" encoding="UTF-8"?>
    <Workbook xmlns="urn:schemas-microsoft-com:office:spreadsheet" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:html="http://www.w3.org/TR/REC-html40">
    <Worksheet ss:Name="FileName">
    <Table x:FullColumns="1" x:FullRows="1">
    <Row>
    <Cell><Data ss:Type="String">0209519_32226v2 v1.1</Data></Cell>
    </Row>
    Variable Substitution:
    =======================
    filename payload:Workbook,1,Worksheet,1,Table,1,Row,1,Cell,1,Data,1
    Expected Output:
    ==============
    0209519_32226v2 v1.1
    Actual Output:
    ============
    0209519_32226v2 v1.1

  • Is there any way to prevent fields from being overwritten when importing data via xdp-file?

    In an pdf-form designed with LCD everytime the form gets merged with an xdp-datafile content of all fields get overwritten, regardless which data-binding (normal, global, none) is assigned to the fields and regardless if the fields are exluded in the xdp-datafile. Is this normal behavior and is there any way to prevent fields from being overwritten?

    The xdp-file is first exported from Acrobat Professional 8 (export data as *.xdp) to get the complete structure. Then in the xdp-file some fields are removed manually and other fields are filled with data. When the modified xdp-file is opened again with Acrobat Professional 8 it grabs the original pdf-form and merges the manually filled fields into the form. With the merge all other fields in the form are overwritten, even if they are not defined in the xdp-file. And that is what I want to avoid. I want to merge the xdp-file into the form and keep the data in fields not defined in the xdp-file.

  • SmartView 11.1.2 install being overwritten by previous uninstalled version

    I am not sure how to explain this but my SmartView 11.1.2 install is being overwritten by the previous uninstalled version (11.1.1.3).
    On our Windows 2008 server 32bit with all SPs installed, we had 11.1.1.3 installed and we uninstalled it. We then removed the c:\hyperion directory. We rebooted and then installed smartview 11.1.2.0 which appears to go to the c:\oracle\product\smartiew directory.
    When the first new user logs in and opens Excel, a small program starts to run and SmartView 11.1.2.0 gets configured and Excel shows an "Smart View" tab.
    Everything is fine until a user who previously was using Smartview 11.1.1.3 launches Excel... When they launch Excel it starts an installer which recreates the c:\hyperion directory and installs 11.1.1.3 and then Excel opens with a "Hyperion" tab.
    The new users that previously had never used 11.1.1.3 are are still in 11.1.2.0 until they close Excel. The next time they open it they no longer have the 11.1.2.0 SmartView Tab but instead have the 11.1.1.3 Hyperion Tab.
    Has anyone ever seen this before and/or have any ideas on how to stop it?

    Note: I redid my steps one more time. The 11.1.2.0 version installs by default to c:\oracle\smartview not c:\oracle\product\smartview.
    Also, I searched the entire server for .msi & .exe files and may have found the culprit. After running the following & selecting uninstall it appears I may have 11.1.2.0 working for all users:
    c:\Windows\Installer\ab630db.msi dated 7/30/2010 3:59pm author: Oracle Size: 7.223KB.
    Edited by: Mike W on Sep 7, 2010 4:42 AM to denote status...
    Edited by: Mike W on Sep 8, 2010 8:48 AM This may be resolved as finding the ab630db.msi may have cleared it up.

  • Why are active menus and dialog boxes disappearing/being overwritten by the active tab/page content?

    Frequently when selecting a download directory/filename in the "save to" dialog the entire dialog is overwritten with the active page content. It appears the dialog has closed, but if you tab through the dialog the active field/control is written but the rest of the dialog remains hidden/overwritten. This has also happened with the "open file" dialog. The the drop down menus on the menu bar are occasionally being overwritten after being activated/pulled down. I have not been able to determine a common/specific event causing this problem.

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Resource Bundle being overwritten

    Hello,
    We are upgrading from jhs 9.03 to jhs 9.0.4.4. A new feature is resource bundles and that is were we are having problems with.
    We have two jhs subapplications and I want to use the same resource bundle class for both applications. The problem is that every time I start JAG the class is being overwritten and not append to the existing class.
    There is a other project that also uses jhs and has two subapplications. They don't have that problem. There the class is not overwritten every time.
    I first tried using JDeveloper 9.0.3.1, but also tried it with JDeveloper 9.0.3.3. Both had this problem.
    Does anyone have a idea what this could be? When does JAG decide that the file should be overwritten?
    Thanx,
    Dennis

    Dennis,
    The JAG loads the existing COMPILED resource bundle. So, make sure you compile your resource bundle before you run the JAG, and make sure it is on the classpath of your project.
    Lastly, make sure you set "Override NLS Resource Bundle Entries" to false in the Application Structure Editor.
    Steven Davelaar,
    JHeadstart Team.

  • HHActiveX.dll is being overwritten by a different, earlier version...

    Here's an interesting problem:
    On some systems on which my .chm file for a local help system is installed, HHActiveX.dll (the 32-bit one supplied with RH9 for redistribution) is being overwritten using a different, earlier version. It is not yet clear when the overwrite occurs, but it is being looked into.
    Has anyone seen this before? I don't see how it's possible that it's a problem with the .dll or the .chm, so I suspect something is awry in Windows (XP, SP3 in this case).
    Thanks in advance!

    Hi Burtin
    I might imagine that could occur if someone installed another application that uses RoboHelp created CHM files and requires the dll.
    Has that by chance been the case here?
    Another possibility would be if for some reason a system restore point has been set and reverted back to.
    Just some thoguhts from the edge... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • [solved]how to stop /etc/resolv.conf keeps being overwritten ???

    no matter how many times to change the content, it keeps like that:
    # Generated by dhcpcd from eth0
    # /etc/resolv.conf.head can replace this line
    nameserver 192.168.8.1
    # /etc/resolv.conf.tail can replace this line
    so i can't add nameserver in it
    Last edited by tempo (2010-01-14 15:01:35)

    The clue is in the message, use a file called resolv.conf.head to add a nameserver to the top and resolv.conf.tail to add it to the bottom.
    It's being overwritten because you are using dhcpcd to auto configure your network settings.
    Last edited by Meyithi (2010-01-14 13:03:43)

  • Keyboard Shorcuts being overwritten

    Hi all, my keyboard shortcut prefs are (unpredictably) being overwritten with the system defaults. This has happened a few times now and it's getting very annoying. Unfortunately I haven't seen a pattern - but it's happened at least 3 times in the last 6 months. I thought it was happening after system patches, but it just happened yesterday after a simple restart. Any clues? Is there a file I can backup to restore my shortcuts (when) it happens again?
    Thanks in advance-
    Daniel Cardenas
    Powerbook 12" 1.33   Mac OS X (10.3.9)  

    550/2996
    Hi Daniel,
    Welcome to Discussions!
    Yes, this annoying problem was known, and nobody ever found a durable fix, that I remember of.
    It is fixed now, since 10.4.2 or 10.4.3, which won't help you much, sorry!
    --> Feedback ...
    and finger crossed, hopefully this kind of bug on an older OS would still be worked on for the next Update?
    Axl

  • Is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ?

    is there a way I can use my external hard drive without the files being transferred on to my computer? as like like my iTunes music being on my hard drive without them being copied onto my computers hard drive ? because i dont have that much memory and i wanted my external hard drive to be the source for my music files and not my computer.

    Many users keep their iTunes libraries on external drives. You just have to remember to connect and power up the drive before launching iTunes.
    iTunes for Mac: Moving your iTunes Media folder:
      http://support.apple.com/kb/HT1449 

  • I get an error when starting firefox on several user profiles: the bookmarks and history are not functional something about the file being in use.

    Windows Server 2008 R2, Windows 7 workstations, the appdata folder is redirected to a network share at \\server\profiles and several users are unable to use bookmarks getting an error about the file being in use. I'm wondering if maybe my antivirus (Trend Micro) or my backups (Symantec) might be locking up the places.sqlite for these users? Though I don't understand why it would be for some users and not others. I can't be the first one and I'm not coming up with anything searching google endlessly. Anybody else run into this?

    hello, yes this is likely caused by an external program locking access to the bookmarks/history database. you could try renaming the file in question & see if it is working when it is regenerated, this will clear bookmarks and the history though, so keep a backup...
    [[Fix "The bookmarks and history system will not be functional" error message]]
    http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Maybe you are looking for

  • Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

    I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things

  • Streaming from a stored FLV

    Hi all, I'm trying to create a web tv using Flash Media Server and Flash Media Encoder. I tried to send a live stream (taken from a webcam) through the FME encoding. That's all right. Now I will try to send a stream that is already stored in a FLV fi

  • Need HELP with BUTTONS (help! help!)

    I am trying to create a "return to previous page" button, one that acts like the "Back" arrow on your web browser. I want to add this on my Master page, so that every chapter will have the same button in the same place with the same result. My manual

  • Problems with browsing on Safari and Firefox since Leopard upgrade ??

    Ever since I upgraded to Leopard, I am experiencing consistent problems while browsing. Both Firefox and Safari stall when I click on links or try to load pages. The browsers just appears dead and the loading icons just stall. Firefox is much worse t

  • Cash sales Order Related Billing

    Dear Forum Members Hi I need clarification on the following. Both in cash sales and regular sales orders , delivery , PGI and then billing is involved. So why we call cash sales process as  order related billing. I find that unless goods are posted i