Files/clips import sequence not according to date/time

When I import files/clips the sequence of is all muddled-up it looks the last files/clips according to the date/time are positioned first and first files last - why would this be and how can I resolve the problem?

There may be another case, at administration level: if you have several SPO workprocesses, the sequence of printing may not be respected: SPO 1 processes DO while SPO 2 processes INV for example. A solution to this is to use "print sequentially" flag in output device definition (this may not work at exceptional moments, when SPO workprocess exceptions occur, this is detailed in SAP notes).

Similar Messages

IPhoto, sort by date is not a true date/time sort

In iPhoto, sort by date is not a true date/time sort. If you have two cameras with there own naming convention iPhoto sorts filename by date separating the two cameras in the view. Is there a way to sort by DATE&TIME ONLY?

Using two cameras using iPhoto to upload pictures.
Both cameras are set to the correct time and date.
Connect camera ONE filenames IMGP0101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 27, 2013
In order by time
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Connect camera TWO filenames IMG_1101
By default:
No event name
Split events checked
Select import 12 photos
Creates events:
Untitled event December 28, 2013
In order by time
Untitled event December 29, 2013
In order by time
Untitled event December 30, 2013
Now I have 2 events for each of December 28, 29 and 30 they are not all under the same event name. My only option is to click and drag the pictures from the second set of events to the first set of events then they are in order. This is a real pain to do. There needs to be a way to reset the event dates so all pictures from both cameras end up in the right event date.

Need to arrange photos according to date/time taken, three synced cameras

Hello, we recently shot a wedding using three different cameras (with inner clocks synced). Now I need to combine them into one folder and arrange in correct sequence according to date/time taken. Can't figure this out. Using Photoshop full version.

Put them in one folder and in Bridge Sort by date created.

When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this?

When creating a comment summary, I want to end up with a pdf of comments only. In addition, I do not want author, date, time, or page number to show in my comments summary. How can I do this? I do a lot of reading, and when I summarize my comments, I like to save these comments in a larger document I compile over time. I typically create a comment summary, export it to a text editor and find myself having to delete author, date, time, page number, and anything else that is not the raw and net comment. It would save me some good time if someone showed me how to do this. The reason I do not want any additional information is because it simply adds stuff I do not need in my compilation of summaries for large amounts of papers over time.

What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.

Date picker is not available in date/time field

Hi there,
I'm wondering while using a date/time field. Since I made some changes on this field the date picker (Arrow down right next to the field to show up a calendar) is no longer available. Has anybody got a clou what the problem might be or how I can bring the date picker back to this field.
Thanks in advance.
Best,
Maja.

Hi there,
I'm just wondering about the following settings/patterns:
As you can see this field is from the type "Date/Time Field". So far so good, but when I'm opening the dialog "Patterns", this dialog is just for a "Date Field" and not for a "Date/Time Field". No trouble so far, but the confusion thing is that the date picker is available in this field. Has anybody a clou how this is working? Or can anybody help me to convert a "Date/Time Field" to a normal "Date Field" which provides this date picker?
Thanks in advance and kind regards,
Maja

The imported clip are not sorted by date/Time

I have just imported a bunch of tapes (mini-DV with time stamp ok) into iMovie. 150gb of video !
I have imported the tapes evenly but now, I want to see all my clips sorted with the date-time order of the DV timestamp. Is it clear enough ?
Thank you for your help
Hervé

This page
http://www.pachysoft.com/PaneReliever/features.html
says:
"Sort iMovie's Clips Pane by:
          Original Order (Eliminates empty slots)
          File Name
          Clip Name (Up to three different columns)
          Time Stamp
          Dragging rows within iMovie Pane Reliever's main window"
But it doesn't say it's really the time stap from the tape, although I get that impression.

HT2506 Would like to imported photo displied according to date, begin with oldest to most recent in sequence.

Using the Preview app on OSX10.7.3:
My window display shows old to recent in randamly arrenged, when imported from attached camera. It's a task to locate photo taken most recent among them. Is there any way to set preference to remedy the problem?

Use the Photos ➙ Adjust Date menu option. Pick the date of the photo you want for the entire album. That will change the date of the event to the date you chose but not change the metadata of the files themselves.
*DO NOT* checkthe box to change the Original files as you might want to revert back to the original dates at some time.
Happy New Year
Message was edited by: Old Toad

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

PSE13 and Revel issues with the notes filed and date/time when syncing.

I extensively use the notes field in PSE13. For photos and videos this seems to get over-written when synced to Revel. For photos I can recover it by selecting 'Update Thumbnail' but during the next sync it over-writes it again.
I also have some files where the date / time are changed when syncing with Revel, particularly video files.
Any ideas?

I also have this problem. The time of my iPod always changes back to the time and date of my last restore every time I sync it. And I know of others with this problem also. Perhaps it is possible that your iPod and mine have been "configured" in a way that causes this issue?

Sql command not working with date time??

I am using my own sql query to fetch data in the sql command.
Due to the problem I found - here is the basic example:
The sql is:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss')) minu from dual
But I am not getting anything in Crystal Report tool!!
In any sql tool I get results.
When I am not using time part (hh24:mi:ss) :
select to_number(to_date('10/11/2011','dd/mm/yyyy') - to_date('09/11/2011','dd/mm/yyyy')) minu
from dual
I am getting data!!!!
What is the problem??
Initially I had it with parameters of type 'Date Time'
Please, any one knows what the problem is?

Hi,
Sorry for the delay and thanks for answering.
It was partial solution
Moving to oracle driver, not (OLE DB), this specific one worked fine:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss'))*100 minu from dual
BUT
When I tried to change one of the hardcoded values to be parameter of type 'Date Time' I couldn't pass the validation step - mostly the errors:
"ORA 00900 Invalid sql statment" and
"ORA - 00907: Missing right parnthesis"
No matter which format I used.
Last version is:
select to_date('{?tsStartReport}','yyyy-mm-dd hh24:mi:ss') from dual
Any idea why 'Date Time; is so problematic? How can I workaround it?

Reminders are not keeping the date/time I set and are not reminding me.

When I create a reminder, I schedule the date/time to be reminded. Once I close the Reminders, the date/time are removed from the items in the list. This just started a few days ago. I haven't done an update; my phone is up to date.
Thanks!

Body text in all of the Page Layout templates is filler text, in Latin. It's there to show the user (that would be you) what a mass of text will look like on the page, without the distraction of having the words actually mean something in the language of the user.
That filler text is also "Placeholder" text. Click anywhere in the box holding that text and ALL of the text in that box will be selected. Type a single character, and ALL of the placeholder text will disappear, replaced by the character you typed.
(Some) Headline text in the same templates is in English (possibly in other languages in other localizations), which may or may not be a good idea. A headline reading "Vikings new Champs!!" could blind the user to several posible uses for that template. A headline reading "Lorem Ipsum" leaves those possibilities open.
Regards,
Barry

'New' Exchange Battery not holding charge - Date & Time problems

I recently received a 'new' exchange battery for my 2001 500mhz white ibook (OSX 10.3.9, 320ram), as part of the Battery Exchange program, and now I'm having some new problems.
Since I started using the battery a few weeks ago, I've been having constant problems with the Date & Time reseting itself to 1969. I reset to current time, but when I turn on again, it's resets back again. Also, this battery is not holding a charge very well, lasting only about 40 minutes after fully charged (My old battery lasted 2 hours).
I calibrated the battery when i first received it, and I've reset the PMU twice, but no luck.
Thanks in advance for any help & advice....
ibook (500mhz 2001) Mac OS X (10.3.9)

Is there any such program for the G3s?
Only if you replaced your original battery with one from Apple within a certain time frame and within a specific range of serial numbers. Check out the details here:
https://depot.info.apple.com/batteryexchange/index.html

Changing file name: Numerical sequence not good!

Im doing imports where I assign a new name to images with numerical sequence after it.
Problem is LR only lets me start from 1 and not 001.
Therefor when the files get into the hundreds, the files wont display correctly in Bridge.
Can you make LR do the sequence starting with 001?

Absolutely, it can do this.
In the import dialog's filename box, pull down the list and choose "Edit" to edit your filename preset. You will then be able to create a custom preset with a three digit sequence number.
I've done exactly this myself.

Timestamp when saved in text file and reloaded does not give correct dates

Hello
I am struggling with time stamp. I have almost corrected the problem but it is not as good as I expect it to be.
I have data in the main vi which logs into text file with time stamp for everyday results logs.
I then pull all this data to display on waveform graph with the performance data on y axis and time stamp on x axis.
I convert the time stamp data from string back to time stamp using scan from function in string pallette. When I run the waveform graph vi. The time stamp data is not correct one. I see year values beginning 1974 etc. I change these values to 2011 and the correct dates and then could see the accurate logged data from data logger but I would like to have the starting date in my logged file the left most date on x-axis. I try modify dates in display format section of waveform graph but I think it gives the values in seconds which doesn't make much sense to me. Is it possible to automatically set the starting value of the graph as the first date in the logged file? I am new with using time stamps. Any feedback will be appreciated.
Kind Regards
Austin

Hi Austin,
"Is it possible to automatically set the starting value of the graph as the first date in the logged file?"
Sure: Use autoscaling, format x-axis as time and use waveforms with correct t0 value...
For all other questions you should attach a VI to show your current state of programming!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

We need doument attached list order in SOLMAN according to date & time wise

Hi,
we are addding documents to ticket or issue in documents Tab (t-code crm_dno_monitor) But we need to display these file as per date and time wise.
regards
Ganesh
Moderator message: not a proper question, always try to solve problems yourself first, do not just dump specs, please search for available information.
Edited by: Thomas Zloch on May 9, 2011 9:59 AM

Check with badi ME_PROCESS_PO_CUST method PROCESS_HEADER - method SET_DATA

Files/clips import sequence not according to date/time

Similar Messages

Maybe you are looking for