Files corrupted in zone after box reset

Hi
We have a system where we somtimes have file corruption in a zone.
We are running
Solaris 10 6/06
Solaris Volumemanagement RAID-1/Mirror on two SCSI disksWe have not yet been able to reproduce it.
Does anyone have any idea of what it might be or have ideas of how to reproduce it?
Have a nice day
Henry

We have a similar configuration with RAID1/mirror and occationally see the same file being corrupted after a box reset. Haven't been able to reproduce it. I know it is not of much help, but always nice to know that you are not alone.

Similar Messages

Data corruption with SSD after hard reset

Hi, I'm using a Mac Mini for a car product and I MUST shut it down each time the hard way, i.e. by cutting the power.
I am perfectly aware that this is definitely NOT the recommended way to shut down OSX because it might lead to data corruption but at the moment there are NO other options. So please don't simply suggest to shut it down the "good way", i.e. via software, because it simply isn't an option.
Now, in the past I did lots of ON/OFF tests with conventional drives and had no problems. Recently I moved to SSD drives and it looks like I get more frequent boot problems (apple logo with the wheel spinning forever). Using DiskWarrior in these cases fixes the problem and repairs the folder structure of the drive. After that the drive boots again.
Given the constraints for the application, i.e. shutdown==powercut, is there any way I can ensure better data integrity? If I disable write caching would that help? Any other trick I could do to make the system more resilient? And finally, are actually SSD more prone to crashes of this kind or was that just a coincidence?
Thanks a lot for the help, I hope some of you has experienced this problem in a similar situation (and found a good solution)
cheers
Emanuele

There are OSX compatible UPSs that send status information to the computer via USB. This enables the computer to do a normal shutdown before the UPS battery runs out. Here's an example of the system preference that will show when a compatible UPS is connected:
<http://www.cyberpowersystems.com/support/faqs/faqOSXUPS.html>
Do you think disabling write caching would help at all?
It might, but the problem may be entirely in the SSD. Do you have journaling enabled on the SSD? That could make a big difference.
Finally, I'm using OCZ Solid 2. Do you have any comment on that or do you recommend something different? I doubt that SLC drives would help in this matter.
You would have to contact the SSD makers and ask them how well they handle power failures. It should be possible to make them no worse than a normal hard drive, but there may be some compromises they have to make for performance reasons.

N70 Maps "File Corrupted"

Hi all
I have Nokia N70 with the latest firmware v5.0638.3.0.1
I installed Nokia Maps late last year, but never really used it. I tried to load it earlier this week, but it refused to load. So:
- I tried to re-install the SIS - "File Corrupted" Error.
- I tried to remove the Maps app from TOOLS > MANAGER - "File Corrupted" Error.
- I formatted the Memory card - "File Corrupted" Error.
- I hard reset my phone and tried to reinstall but - "File Corrupted" Error.
- I even downloaded the v2 Beta of Maps but - "File Corrupted" Error.
Any advice on how to get around this? I'm travelling to Spain next week, can could really use the maps!
thanks!

Hi Again
installing version 1 should be ok do if you use application manager to install them it should work save it on you memory card to make putting the maps on it easyer
Hope this helps

I back up my files by using back up iphone function.but after i reset

i back up my files by using "back up iPhone" function.but after i reset and restore from backup for my iphone 4,all my apps were gone.what can i do?i found that the apps in not in itunes sync,how to restore back all my apps?i have not turn off my my imac from whole entire process,but iphone is not connected already.
please help,thank so much.

on your iphone - appstore - update - purchased - all/or not on this phone - select either tab, to download app tap on the cloud on the right hand side of the app.

My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

1. Should be possible to do that; go to the Utilities menu and select 'reset password' before starting the installer. (while booted from the DVD of course)
2. Standard installation of SL only replaces system components; applications, user data and preference settings should not be affected.
3. But you do have a backup just in case, don't you?

Zen XFi- 2 crashed and can't see any files on the player after reset

My zen crashed yesterday and after i reset it - everything that was on the player has gone - music pictures applications etc - however if i plug the player into the PC all music etc is still on the player - i have reloaded the firmware but no joy - any ideas ?

Copied media files to a HPFS+ (journaled) SimpleTech USB drive connected to my iMac. Files copied fine and can be accessed from the iMac with no problems.
I connect it to the TC, the drive can be seen and mounted over the network but the files do not show up. The free space corresponds to the free space left by the files I had copied--but again the files do not show up.
TC file sharing is on and is working fine as demonstrated by access to the internal drive without problem. And the USB drive shows up in the airport utility without error indication. Files copied over the network to the USB drive are accessible as expected (read/write/delete--no problem).
Any advice?
Thanks,
Mark

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Hello, I have downloaded os x mavericks, but download failed many times and file corrupted. Now i'm trying to download again but in app store its showing as downloaded and after hiding the purchase there is no unhide or re-download option. Plz help me.

Hello, I have downloaded os x mavericks, but download failed many times and file corrupted. Now i'm trying to download it again but in app store its showing as downloaded and after hiding the purchase there is no unhide or re-download option. Plz help me. Thanking you in advance.

If it is hidden, follow the steps in this KBase
http://support.apple.com/kb/HT4928
If you have it in the Applications folder, trash it before attempting a new download.

E71 sis files installation error msg "file corrupt...

I have an e71 purchased 2 months ago which was working fine until i did tried to install nokia maps updater. After that whichever sis file i try to install i get an error 'file corrupted'. How to rectify

But for doing a hard reset you should do this-
Before perfoming this please take a backup of your data.
Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont be affected.
Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format the phone.
If none of these worked then you might want to do a hard reset.
For this you have to-
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. For Nokia N97 is SHIFT /SPACE BAR / BACKSPACE. )
3. While holding these buttons, hold the power button to switch on the phone.
4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

N8 "File corrupted" when installing apps

I recently made a reset on my Nokia N8, using *#7370# command.
After the reset I'm not able to install any application to the phone. When I start the installation (e.g.: Ovi Store), the "File corrupted" error message appears on the screen. I tried different applications but the same happens.
I tried re-installing the firmware, and doing Factory reset, but none of these helped.
Anybody having the same issue?

if i understand well you have install the firmware via pc 2 times and did not help
then try one more time with out hard reset, if still nothing you may need go at nokia care
dont know more detailed infos cos never involved so deep but seems the installing part or qt files or applicationswhich helps to install has been damage or missing (after hard reset) and updating the software not help because phone after update is restoring back (something like back up) the previous setting

Palm Treo Pro freezes after hard reset

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar issue - History:
Began experiencing device.exe crash about 1-2 minutes after soft reset [after installing old 3.x beta of Skype app]. Also could not turn on BT or Wifi after installation completed or after soft resets. Both symptoms continued after uninstalling both the Skype app and the fenec browser.
Executed full sync of device and performed a hard reset. I have performed several hard resets to see if that would work and no luck.
The hang is occuring roughly half-way through eboot(?) load of WinMo image from flash (screen with out-of focus lights and progress bar).
Note that I did not purchase a SIM card with the Treo - so slot is empty. I also installed a 16GB transflash that was working A-OK - have removed it until I can get device to boot again.
My experience with developing CE (5/6) images with Platform Builder tells me I may have a corrupted ROM image (or worse - faulty flash block/hardware). Is there a way to obtain and reflash the treo pro (850UEU unlocked ROM image to make sure this isn't a HW issue (without going to third(?)-party images/flashing utilities)?
I purchased the unit recently as an open-box from TigerDirect - several of the qwerty keypad buttons do not work (including power button and wifi button) - shouldn't be interfering with this stage of boot, though...
Any help you can provide in solving this issue would be greatly appreciated.
Thanks!

Unable to install a zone: Copying 0 files to the zone.

Hi forum users,
I really hope someone has any idea what could be wrong here.
First of all, the server is patched with security and recommended patches, except for 118344-13 -> R-- SunOS 5.10_x86: Fault Manager Patch which I will install on the next maintenance day. It already has 4 zones running without problem.
However when I try to install a new zone now it always fails.
# zoneadm -z blah install
Preparing to install zone <blah>.
Creating list of files to copy from the global zone.
Copying <0> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
ERROR: package <SUNWcsu> is not complete: skipping installation of package
ERROR: package <SUNWcsr> is not complete: skipping installation of package
ERROR: package <SUNWcsl> is not complete: skipping installation of package
ERROR: package <SMCreadl> is not complete: skipping installation of package
ERROR: cannot determine dependency ordered package list from package repository </var/sadm/pkg>
ERROR: cannot generate dependency ordered list of packages from global zone </var/sadm/pkg>
ERROR: failed to initialize packages from global zone </> to zone </zones/blah/root>
ERROR: cannot copy and initialize packages from global zone to local zone <blah> path </zones/blah/root>
ERROR: cannot create zone boot environment <blah>
zoneadm: zone 'blah': '/usr/lib/lu/lucreatezone' failed with exit code 74.
To me it seems obvious that the problem lies in the fact that it doesnt even copy a single file to the configured zone, therefor it can't install any packages and all the rest fails too. The big question of course is, why does it think it only needs to copy 0 files? Has anyone encountered such a problem before? I havent found anything yet on patches breaking zoneadm install but might have missed it.
Does it looks like a HD corruption?Might be since the Sun Management Console agent does seem to freeze on that server too once in a while.

All the packages are fine in the global zone, pkginfo -l tells me the packages are complete.
I did try the truss wrap but it gives me so much info it is hard for me to figure out if something is wrong. The only error i think that returns often and that is not resolved is:
ioctl(4, TCGETA, 0x080471E4) Err#25 ENOTTY
ioctl(4, TCGETA, 0x08047294) Err#22 EINVAL
The part where it seems to compile a list of files to copy however is very empty of truss entries:
Preparing to install zone <gal2en-survey>.
Creating list of files to copy from the global zone.
Copying <0> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
read(4, 0x0806DD3C, 5120) (sleeping...)
ERROR: package <SUNWcsu> is not complete: skipping installation of package
This issue is still unresolved for me. For now the only way to create a new zone on that server is to manually copy all files from another zone, editing the zonecfg entry and net config files for the zone, then i can boot and run it.

"FILE CORRUPTED" error message on N 78

My phone is a Nokia N78 and my problem is as followed:
Before updating the firmware from version 12 to version 20, I had google maps installed. After updating over the air, google maps (and also several other apps) got removed. When i tried to download and install google maps again and tried to install it again, it keeps saying "file corrupted". The same goes with other apps i try to download and install. But I have no trouble installing java apps.
I am wondering if anyone knows how to solve this problem?
Solved!
Go to Solution.

you are very welcome i am so glad that you got your issues sorted. i know how frustrating it can be to have a phone and potentially no 'way out'. been there and done that, that is why i joined this forum i wanted to learn more and find more answers to some questions. technology in general can be frustrating and its ever changing so we have to keep up or we will drown in frustration be well, rad.
ps. and you are correct, i am no expert, my solution is not expert either more of a been down this road solution. i am just another user on this forum that sometimes gets the right answer
Message Edited by radical24 on 19-Jan-2009 07:54 PM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

Data recovery after factory reset

I have seen people write that data recovery was possible after factory reset below the jelly bean OS versions on android but iphone is impossible.
So I wonder what is security technology for data protection on iphone.
Let me know security technology. (data encryption, data fromat algorithm, whatever about data protection)

Follou-up..... reading other questions/answers on this forum seem to indicate I'll have to "cherry pick" specific saved data items from the desktop "Shortcut to System Recovery Files" --- a long process. Is there a quicker way???

Files corrupted in zone after box reset

Similar Messages

Maybe you are looking for