Files disappearing Mac OSX 10.8 Server

Files are randomly disappearing in volumes on our Mac mini running OSX 10.8.2 Server

I'm not 100 percent sure that users didn't delete these files, but it would have been an unlikely cooindidence. The files that disappeared were on different partitions of our server hard drive that are not commonly accessed by all users. So for two people to accidentally delete these files within a short period of time seems unlikely to me. Is there a section in the server log that would show if these files were deleted by a user?

Similar Messages

  • IChat Server - Moving from one Mac OSX 10.5 server to another

    Hi
    I have found and read several posts about migrating Mac OSX 10.4 iChat to Mac OSX 10.5, but that's not quite what I want to do. I have deployed a new Xserve on our network and have moved/migrated all services from my old Mac OSX 10.5 server to the new unit now, with the exception of iChat.
    Does anyone know how I can move all of my existing users/settings across from one server to another? I don't really want to have to recreate all the set-up on the new server and it would be much easier if there was a way of moving the iChat Server from one server to another. iChat seems to install itself in lots of places on 10.5 server and I suppose I'm looking for somebody who can tell me which files/folders need to be moved over to the new unit in order for it to work.
    Thanks in advance.
    Paul

    Paul,
    stop the ichat server on both machines using:
    sudo launchctl unload /System/Library/LaunchDaemons/org.jabber.jabberd.plist
    make a backup of /etc/jabberd, /var/jabberd on the target machine
    copy the contents of the directories /etc/jabberd and /var/jabberd from the source machine to the destination machine, ensuring that owners and file permissions are maintained.
    restart the ichat server on the target machine thus:
    sudo launchctl load /System/Library/LaunchDaemons/org.jabber.jabberd.plist
    and it should work. I say should 'cos I have never actually had a reason to do this, but there is no reason I can see that this will not work.
    Note that this assumes that the user community (names) on the target machine are the same as the source, certificates if you use them are in the same place and, I guess it should go without saying, but the name of the ichat server and DNS names are the same. Note that DNS must be correct and pointing to the target machine.

  • Hosting website on Your own Mac or Mac OSX Snow Leopard Server?

    I have been looking at ways of hosting my websites on my own Mac - how could I do this other than purchasing a copy of Mac OSX Snow Leopard Server?
    I know you can turn on file sharing, but how can you display your sites?
    Can you host more than one site with domain names and does this mean that you would be able to ditch web hosting with a company if the sites were hosted on Mac or Mac OSX Server?
    Thanks for any help that anyone can give me with this.

    Ethmoid wrote:
    I know you can turn on file sharing, but how can you display your sites?
    The key appears to be turning on Web Sharing within Sys Pref's Sharing pane. Also, THIS Apple page says: +"Every Mac user has a Sites folder in the home directory automatically configured for local hosting within Apache."+ And the following Apple doc says: +"You can also share a website on your computer by placing files in /Library/WebServer/Documents on your hard disk."+:
    _Mac OS X 10.6 Help — Sharing a website on your computer_
    The second of these two articles is old, but still may be useful:
    _How to Turn Your Mac Into a Web Server_
    _Apache Web-Serving with Mac OS X: Part 1_
    And this article asks the qstn:
    _Should I host my own web server?_
    ...More articles related to hosting a website on your Mac may be found HERE.

  • List all users/groups in Contacts App with Mac OSX 10.9 Server

    I have installed Mac OSX 10.9 Server locally, and I am trying to set it up so that when a user opens Contacts, and goes to Directory Service it will list all of the users and groups (that have a mailing list) on the server. However, it will only show the users if they are searched for. Otherwise, it is blank.

    As the error says - you need to fix the permissions on your preferences folder, and it sounds like you may be missing part of the Application Support folders or have a permissions problem there as well.
    It sounds like something weird happened to your system that messed up permissions -- we see that happen often when people try to use Apple's migrate utilities between systems or disks (it doesn't copy everything, and messes up permissions).  Fixing permissions with Disk Utility can help, but you may need to reinstall Photoshop to replace missing files/folders, and you'll still have to fix the permissions on your preferences folder.

  • Where is button to accept end user agreement so I can download or read online file.  mac osx reader XI

    where is button to accept end user agreement so I can download or read online file.  mac osx reader XI
    every time i click  on a file to downloac
    i get a reader message Before viewing PDF ... you must launch adobe reader and then accept the End User License Agreement. Ive searched  every part of the menu for this and cant fine it

    Ok, so the Reader app works. Fine, but why did you say ",the reader won't open any more", that led us a confusing direction.
    Ok, the problem is most likely caused because you downloaded Acrobat Pro, which takes over from Reader, then got rid of it. You now have part of Acrobat in Safari, not part of Adobe Reader.
    There are two things to try to fix this. The first and easiest is to download and install Adobe Reader again. That should puts its stuff back in Safari with a bit of luck.
    Important note for others following this thread. Downloading Adobe Reader is not going to help you if you have not understood and followed the instructions to "launch" Adobe Reader (or Adobe Acrobat). Make sure you understand what "launch" means before downloading anything again.

  • Hi I am getting below error on my MAC OSX 10.6 Server

    Hi,
    I am getting below error on my MAC OSX 10.6 server MAC Pro machine.
    Please let me know what this means?
    Interval Since Last Panic Report:  8518861 sec
    Panics Since Last Report:          1
    Anonymous UUID: F1F85B83-6DC2-4E6C-B02C-D1D42F15F321
    Wed Jan 25 16:22:19 2012
    panic(cpu 3 caller 0x2abf6a): Kernel trap at 0x00926b00, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000054, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x080a7600, ECX: 0x00000000, EDX: 0x098da5a4
    CR2: 0x00000054, EBP: 0x56e8be78, ESI: 0x098da500, EDI: 0x080cf800
    EFL: 0x00010202, EIP: 0x00926b00, CS:  0x00000008, DS:  0x080c0010
    Error code: 0x00000002
    Backtrace (CPU 3), Frame : Return Address (4 potential args on stack)
    0x56e8bc88 : 0x21b837 (0x5dd7fc 0x56e8bcbc 0x223ce1 0x0)
    0x56e8bcd8 : 0x2abf6a (0x59e3d0 0x926b00 0xe 0x59e59a)
    0x56e8bdb8 : 0x2a1a78 (0x56e8bdd0 0xcc5c600 0x56e8be78 0x926b00)
    0x56e8bdc8 : 0x926b00 (0xe 0x98d0048 0x56e80010 0x530010)
    0x56e8be78 : 0x927ff8 (0x98da500 0x80a7600 0x5000 0x0)
    0x56e8bec8 : 0x98b7aa (0x98da500 0x80cf800 0x2 0x0)
    0x56e8bf08 : 0x98e014 (0x8086c00 0x8087f9c 0x0 0x807d580)
    0x56e8bf28 : 0x552ea6 (0x8087c00 0x0 0x0 0x4fbef7e4)
    0x56e8bf88 : 0x552eea (0x8087f80 0x8087f80 0x0 0x1)
    0x56e8bfc8 : 0x2a179c (0x8087f80 0x0 0x2a17ab 0x7e0d564)
          Kernel Extensions in backtrace (with dependencies):
    com.ATTO.driver.ATTOCelerityFC(3.4.6)@0x943000->0x99afff
                dependency: com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x92c000
    com.apple.iokit.IOSCSIParallelFamily(2.1.1)@0x923000->0x92bfff
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.8)@0x909000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 1825402534727490
    unloaded kexts:
    com.apple.iokit.IOUSBMassStorageClass   2.6.7 (addr 0x1284000, size 0x49152) - last unloaded 1132024965088576
    loaded kexts:
    com.ATTO.driver.ATTOCelerityFC       3.4.6
    com.apple.filesystems.smbfs       1.6.7 - last loaded 267231229373759
    com.apple.filesystems.afpfs         9.7.1
    com.apple.nke.asp_tcp       5.0
    com.apple.driver.AppleHWSensor       1.9.3d0
    com.apple.filesystems.autofs       2.1.0
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl  1.0.20
    com.apple.driver.AppleHDA        2.0.5f14
    com.apple.driver.AudioAUUC     1.57
    com.apple.GeForce   6.3.6
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AudioIPCDriver         1.1.6
    com.apple.driver.AppleMCEDriver       1.1.9
    com.apple.driver.AppleIntelMeromProfile     19
    com.apple.driver.ACPI_SMC_PlatformPlugin       4.7.0a1
    com.apple.driver.AppleLPC         1.5.1
    com.apple.iokit.SCSITaskUserClient   2.6.8
    com.apple.BootCache        31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage  1.6.4
    com.apple.driver.AppleIntel8254XEthernet  2.1.3b1
    com.apple.driver.AppleFWOHCI 4.7.3
    com.apple.driver.AppleUSBHub 4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA     2.5.1
    com.apple.driver.AppleEFINVRAM      1.4.0
    com.apple.driver.AppleUSBEHCI         4.2.4
    com.apple.driver.AppleUSBUHCI         4.2.0
    com.apple.driver.AppleACPIButtons    1.3.6
    com.apple.driver.AppleRTC         1.3.1
    com.apple.driver.AppleHPET      1.5
    com.apple.driver.AppleSMBIOS 1.7
    com.apple.driver.AppleACPIEC  1.3.6
    com.apple.driver.AppleAPIC       1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient     142.6.0
    com.apple.security.sandbox         1
    com.apple.security.quarantine     0
    com.apple.nke.applicationfirewall         2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
    com.apple.driver.AppleProfileReadCounterAction         17
    com.apple.driver.DspFuncLib      2.0.5f14
    com.apple.driver.AppleProfileTimestampAction   10
    com.apple.driver.AppleProfileThreadInfoAction    14
    com.apple.driver.AppleProfileRegisterStateAction        10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction       20
    com.apple.nvidia.nv40hal    6.3.6
    com.apple.NVDAResman  6.3.6
    com.apple.iokit.IONDRVSupport 2.2.1
    com.apple.iokit.IOFireWireIP       2.0.3
    com.apple.iokit.IOSurface   74.2
    com.apple.iokit.IOBluetoothSerialManager  2.4.5f3
    com.apple.iokit.IOSerialFamily    10.0.3
    com.apple.iokit.IOAudioFamily    1.8.3fc2
    com.apple.kext.OSvKernDSPLib         1.3
    com.apple.driver.AppleHDAController 2.0.5f14
    com.apple.iokit.IOGraphicsFamily        2.2.1
    com.apple.iokit.IOHDAFamily      2.0.5f14
    com.apple.iokit.AppleProfileFamily      41
    com.apple.driver.AppleSMC        3.1.0d5
    com.apple.driver.IOPlatformPluginFamily     4.7.0a1
    com.apple.driver.AppleUSBHIDMouse         162
    com.apple.driver.AppleHIDMouse        162
    com.apple.driver.AppleUSBHIDKeyboard    141.5
    com.apple.driver.AppleHIDKeyboard   141.5
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice  2.6.8
    com.apple.driver.AppleUSBMergeNub         4.2.4
    com.apple.driver.AppleUSBComposite        3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice   2.6.8
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily    1.6.1
    com.apple.driver.XsanFilter         402.1
    com.apple.iokit.IONetworkingFamily    1.10
    com.apple.iokit.IOATAPIProtocolTransport  2.5.1
    com.apple.iokit.IOFireWireFamily        4.2.6
    com.apple.iokit.IOUSBUserClient         4.2.4
    com.apple.iokit.IOSCSIParallelFamily 2.1.1
    com.apple.iokit.IOSCSIArchitectureModelFamily  2.6.8
    com.apple.iokit.IOAHCIFamily     2.0.6
    com.apple.iokit.IOATAFamily      2.5.1
    com.apple.iokit.IOUSBFamily      4.2.4
    com.apple.driver.AppleEFIRuntime      1.4.0
    com.apple.iokit.IOHIDFamily        1.6.6
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch         1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages      289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform  1.3.6
    com.apple.iokit.IOPCIFamily        2.6.5
    com.apple.iokit.IOACPIFamily     1.3.0
    Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 4 GB, SMC 1.7f10
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 32768 MB
    Memory Module: global_name
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
    PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,0
    PCI Card: ATTO Celerity FC-42ES, sppci_fibrechannel, Slot-2@15,4,1
    Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
    Parallel ATA Device: PIONEER DVD-RW  DVR-111D
    Fibre Channel Device: SCSI Target Device @ 0
    Fibre Channel Device: SCSI Target Device @ 1
    Fibre Channel Device: SCSI Target Device @ 2
    USB Device: Hub, 0x05ac  (Apple Inc.), 0x9130, 0xfd500000 / 3
    USB Device: Apple Cinema Display, 0x05ac  (Apple Inc.), 0x9222, 0xfd520000 / 4
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd100000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0xfd130000 / 6
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd120000 / 5
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    FireWire Device: unknown_device, Unknown

    Any news from ATTO? newer driver?
    did it just start but began after "xyz"?
    Have you run Apple Hardware Test?
    Take out the ATTO card and / or boot in Safe Mode and things are fine?
    And while the Nvidia 7300GT hasn't yet failed, might want to look into a replacement for it, too.
    OS X Snow Leopard Server Community:
    https://discussions.apple.com/community/servers_enterprise_software/mac_os_x_ser ver_v10.6_snow_leopard

  • I can't download linked files on mac osx lion what do i do?

    i can't download linked files on mac osx lion what do i do?

    There have been some reported problems with Apple's servers.
    Try this.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    I assume you are trying to update via wifi. You can also connect the iPad to your computer and update using iTunes.
     Cheers, Tom

  • Opening .smi files in Mac OSX

    Hello out there...
    Right now I'm trying to add subtitles to some movies that I have downloaded. Unfortunately, all of the subtitle files are .smi and for some reason the disk mounting image fails after downloading and the files are worthless. I can't get them to open in Quicktime, Real Player, or the DIVX player.
    Could anyone please lead me in the right direction here? Is there someting I should know about downloading and opening .smi files in Mac OSX? Is it different than for Windows perhaps...

    Hi soxcoverfeet,
    first of all: WELCOME TO THE DISCUSSIONS!
    The .smi extension is an indicator for a Self-Mounting-Image from OS 9. As a first step try to open it with disk utility. For that just drag the smi-file over the disk utility icon.
    If it did not work, try this: click the .smi-file and type Apple-i to get the information window. There you should see a checkbox that allows you to define it as Classic-file. Check it so that the file will be opened in Classic and there it should expand correctly. In case you deleted Classic you will have to reinstall it.
    These articles might help:
    Mac OS: What is a .smi File
    Mac OS X: Using Disk Copy disk image files (Disk Copy is now integrated into Disk Utility)
    Mac OS 9.1 and Software Updates: .smi Disk Image Volumes Appear Empty
    Common error messages when downloading files
    If this answered your question please consider granting some stars: Why reward points?

  • Does anyone know if you can unzip a .cab file in mac osx 10.5.8? The file in question is an Excel spreedsheet template. Thank you...

    Does anyone know if you can unzip a .cab file in Mac OSX 10.5.8? I am trying to open an Excel spreed sheet template that was downloaded as a .cab file from office for mac website... thank you

    Use Stuffit Expander, Download and install from here, make sure you download the correct version for your Mac OS:
    Stuffit Expander Mac

  • Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

    Hi all,
    I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server.  I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars.  We want to take full advantage of OSX Server and to completly get off of exchange.
    What are the best ways to do this?  Are there any tools available to help this process?

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • G4 Mac OSX 10.4 server with RAID & sharepoints - Intel Xserve & RAID?

    Hey all,
    so we need to migrate our G4 Power Mac running Mac OSX 10.4 server with about 60 user accounts and a RAID with about 50 sharepoints to a brand new Intel Xserve with 10.4 server and a brand new RAID.
    My plan for the server part of things is to put the new server online with the old one still running, make the new one a replica of the old one, then take the old one offline and promote the new one to a master.
    But what to do about the sharepoints and several terabytes of data? Is there any way to do this except manually copying the data and re-creating all the sharepoints? That wouldn't be the complete end of the world as long as all the accounts/groups come across via the replication, but it'd be nice if there's a smart way to do this.
    Thanks for your help!

    Never tried the replica promote so I can't say that it will work. The way I migrated from 10.4 to new hardware 10.4 server was to set the new server up with exactly the same setup, DNS, IP and so on. This requires the old server be off the network for a bit. Once it was running I would have a backup of the LDAP/OD info made directly from the old server in Server Admin. Import this on the new server and all users and passwords are back in place. Now as for the share points and the data the best thing to do is to attach the old RAID to the new unit first. Hopefully you have a way to have both RAIDs connected at the same time to the new unit since that would be best.
    In the interest of downtime you could immediately add the share points back in to WGM pointing to the old RAID drives. This gives you the free time to migrated the data when you want to. Make sure you know the right settings for each protocols which you use for each share point (AFP, SMB, FTP, NFS).
    Now that your up and running you can move data by whatever means you see fit to the new RAID keeping in mind you want to keep permissions in-tacked. There are many clone or sync option out there and you don't need to move all the share points at once.
    The main reason I chose this method is it offers a fall back and no client reconfiguring. If something is not working on the new server you can simply plug the old RAID back to the old server and your up. Second is that if you try to run both server at the same time you would need to create a whole new identity for the new server (IP, DNS and so on). Migrate data via a Network (very slow) and reconfigure all clients to point at the new server. I've done this at least 10+ times at different locations and even before the easy 10.4 backup of LDAP/OD info. Making sure you had a clean LDAP was never so easy. All swap outs took less then an hour of down time with maybe 2 hour pre-swap setup. Data movement to a new RAID was not always the case but by using this method you can move data later which is the most time consuming process of the whole swap.

  • Mac OSX 10.4 Server on a MacMini + Mac Mini Network render farm

    Hi Guys,
    I am working at a small vfx post house in Bangkok. We are looking to install some sort of server and network renderfarm.
    There was talk of going Windoze based when I first arrived, so I am doing my best to steer them to Mac & OSX. (Most of the current workstations are MacPros)
    For a budget solution I said it may be possible to run a OSX Server on a new Mac Mini, and also create a 5-10 machine Mac Mini renderfarm (for rendering 3d scenes from Maya, encoding with Compressor, and 2d scripts from Shake).
    So my questions are:
    1. WIll OSX Server work on a mac Mini?
    2. Will the Mac Mini be able to handle it? It won't be a render box itself, more a machine to keep control of permissions on our central storage (stop people moving and deleting files and saving things in the incorrect place), and control the QMaster Adminstration.
    3. Has anyone had any experience creating a renderfarm from a stack on Mac Minis?
    4. If no one has any idea can they recommend a person/forum to ask?
    Thankyou very much!
    Adam Teale

    I found answer to my first question - does OSX server work on a Mac Mini - yes
    http://www.macgeekery.com/tips/customization/macmini_and_os_xserver

  • Convert Cisco WebEx .WRF and .ARF files for Mac OSX to .WMV

    Since the Cisco WebEx Recording Editor doesn't appear to support Mac OSX, is there a way to convert Cisco WebEx recordings, .WRF and .ARF files, to .WMV or .SWF for a Mac OSX users?

    Hi Ben,
    Here is a copy/paste from the Arcsoft site:
    What is a PHB file?
    Question
    What is a PHB file?
    Answer
    PHB files are proprietary album files used by some of our programs, namely PhotoBase. Albums do not store your images. They serve as links to files stored on your computer or removable drive. If you delete the original file, the thumbnail in the album basically becomes a dead link. For example, if you have files on a floppy disk and create an album, you'll always need to have that floppy in the drive whenever you want to view the full images. Likewise, if you have a digital camera that is read as a removable drive, you would need to have it connected if you create the album directly from the camera. The best thing to do is copy all of your images into a folder on your computer, then create the album referencing those files. Albums are useful because they let you preview and organize files on your system in a convenient fashion. It is also from albums that slide shows are made with some of our programs.

  • How to run .rdp file in Mac OSX?

    I have installed Microsoft Remote Desktop 8.0.5 For MAC OSX 10.8.5 and added new remote connection in the list which works fine.
    Now i export same connection to .rdp file but when i execute it mstsc opens remote os login screen for user password to login (which is already in keychain store).
    Question:
    how can i launch .rdp file so that it will not ask remote user password?
    where/how to store password?
    ------- .RDP File ----------
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:32
    full address:s:192.168.1.130
    audiomode:i:0
    username:s:mylabs\administrator
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:0
    connect to console:i:0
    gatewayusagemethod:i:0
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com
    bookmarktype:i:3
    use redirection server name:i:0
    Thanks in advance

    Hi Mandar,
    Thank you for your posting in Windows Server Forum.
    “create a simple shell script to launch my remote desktop connection. Eg: if I want to launch SteiniServer.rdp, then my script would look like this:
    open "/Applications/Remote Desktop Connection.app" ~/Documents/RDC/SteiniServer.rdp”
    (Quoted from below article).
    Please go through below article might helpful in your case.
    Quickly Launch Remote Desktop Connections on Mac OS X
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Strange dots in Phantom "packed" .cine-files with Mac OSX 10.9

    Hi there
    I have problem with my Miro .cine-files. After upgrading my operating system to MAC OSX 10.9 (Maverick) I found strange dots on the right side of the frame in my footage shot with the Phantom Miro 320LC.
    I first thought it might be a bad pixel on the camera but then checked older footage of the same camera that was already edited and working perfectly fine. Even those .cine-files now have those dots in Premiere CC, Speedgrade & Davinci Resolve 10 Lite (FreeVersion). I also own the GlueTools Plugin for the .cine codec and if I load the files into AfterEffects the dots are NOT there.
    Screenshot Premiere CC - top right & bottom right of the frame
    Screenshot AfterEffects w/ GlueTools Plugin
    Another work-around is to load the .cine-files in the PCC-Software and safe them as "unpacked" .cine-files. The dots are gone in all programs mentioned above. The only program that interprets the footage correctly is Davinci - all other programs show the file approx. 2 stops darker and have the same overall green tint to it.
    Have you encountered the same problems? Did you find a solution beside downgrading OSX to something like 10.6.?
    As a reference I uploaded 3 files into my dropbox:
    https://www.dropbox.com/sh/aukk8hj8xjhkp1r/AACd5LwaanRKj4xhF1SHPrSla
    1. file: c_15153_187_ORG.cine --> original .cine file from Miro
    2. file: miro_test_unpacked.cine --> original .cine file converted with PCC-Software and safed "unpacked"
    3. flie: miro_test_packed.cine --> original .cine file converted with PCC-Software and safed "packed"
    I'm working as a Highspeed-Operator, the post is normally done somewhere else and the systems vary from MAC to PC with Adobe, Avid or ...
    Any suggestions would be appreciated.
    Kind regards
    torsten

    Is anybody from Adobe monitoring this issue? I'm having the same problems with Premiere and .CINE files. Previewing them looks fine (no longer having the darker issue) but when I render, it becomes green and pixelated.

Maybe you are looking for