Files does not get sorted from Windows

I have OSX server (7 years old) using as a file server getting connected by many Windows clients. It did not happen in the beginning, but lately, I cannot sort the files by file names or file types from Windows client computer. It was all in good order even when I looked from Windows client computer, but in the past couple of years, it can never sort in good order either by file name or file types. Does anyone have the same experience like this or know what is going on?

Hi, I got reboot problem on W2k3 as well. Any time it came out, there were lots of java.nio exceptions. I really wonder if the NIO package will crash the OS? Btw, the JVM version is 1.4.2.008
One more: I found that there are exceptions which tells me "the establish connection has been terminated by the program hosted in your computer". Can any of you help? Thx...

Similar Messages

  • JAR file does not get uploaded to client for my SERVLET generated APPLET

    Some help please...
    I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
    Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
    Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
    Thanks...

    It works!!
    This is what I did:
    The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
    <APPLET CODE = "marketmap.client.MarketMapApplet"
    ARCHIVE = "weblogic.jar"
    WIDTH = "657"
    HEIGHT = "382"
    ALIGN = "BOTTOM"
    ALT = "APPLET tag not recognized">
    </XMP>
    <PARAM NAME = CODE VALUE = "MyApplet" >
    <PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
    <PARAM NAME = "scriptable" VALUE="false">
    <PARAM NAME = ARCHIVE VALUE="weblogic.jar">
    </APPLET>
    Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
    Anyway I figure I'd share. Thanks for the help too.
    Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

  • Content Organizer bug - PDF files does not get routed correctly if autodeclaration is on and library level default values are set

    It looks like whenever one specifies Column default values at a library level then the content organizer routing goes a bit awry SPECIFICALLY FOR NON OFFICE FILES [e.g. PDF] . Below are the observations and issues
    1. Column level default value set on a record library with auto declaration of records turned on.  The content organizer routes the document to the library but also keeps a copy of the document in the drop off library. It does not remove it from the drop
    off library. The instant we clear the default value settings at the library level of the target library the content organizer works as expected again. 
    2. If default value settings are specified on a column in the target library then the PDF file gets routed to the document library but all the metadata is blanked out. The copy of the file that remains in the drop off library has all the correct metadata but
    the target library has blanked out metadata. 
    Are the 2 observations described above by design or are they bugs? If so is there any documentation that is available that proves this because this does not make logical sense and proving this to a client in the absence of any documentation is a challenge.
    The problem goes away if we shift the default value to the site columns directly at the site collection level. It's just the library level defaults that the pdf files do not seem to agree with

    Hi Lisa,
    Thanks for responding. This can be replicated in any environment but is only replicable for a specific combination of content organizer settings . The combination of settings I am referring to can be seen in the screenshot below. If you turn off redirect
    users to the drop off library for direct uploads to libraries and if you turn on sharepoint versioning then you should be able to replicate the issue. Also we are using managed metadata site columns. I simplified this use case to a custom content content type
    with just 2 custom managed metadata columns and can still replicate the issue in several environments. Also note the issue does not occur if the default values are set at the site or site collection level. It only occurs if you set the column value default
    at a library level.  I was able to replicate this on a completely vanilla Enterprise records site collection freshly created just to test this.  Also note that the issue is not that the file does not reach the destination library. The issue is the
    document does not get removed from the drop off library after it is transfered to the destination library which technically should have gotten removed.

  • HT3131 westinghouse SK-261H735S does not get signal from my MACBOOK PRO

    My tv (westinghouse SK-261H735s does not get signal from my Macbook Pro, can anyone help?

    My tv (westinghouse SK-261H735s does not get signal from my Macbook Pro, can anyone help?

  • IPhone 4S does not get detected in Windows 7

    iPhone 4S does not get detected in Windows 7
    When I connect my iPhone 4S to my computer, iTunes does not detect it. iPhone pops the message of USB connectivity and defaults to Mass Storage. Windows shows the message that "Device is ready to use" and I can read both drives of the iPhone in Windows Explorer. However iTunes does not detect the device and the "Devices" tab does not appear. I have tried Restarting the phone. Restarting the computer. Connecting the phone to a different computer. (I'm on version 4.3.3 (8J2), firmware 01.59.00 and iTunes 10.5.3.3).

    First make sure you usb drivers are up to date
    http://windows.microsoft.com/en-CA/windows-vista/Tips-for-solving-problems-with- USB-devices
    Try a hard reset on your iPhone, press the power/sleep & home button at the same time until the apple logo appears (ignore the slide to turn off prompt). Once the apple logo appears release the buttons and wait for your iPhone to boot back up then try connecting. Also try a different USB cable if you have one available.

  • FCP Kona Card does not get input from FCP??

    Kona card LHE. Had it working just fine but I did something goofy and the Kona control panel does not get an input from FCP. Open to any and all suggestions.
    Thanks
    John

    but I did something goofy.........Open to any and all suggestions.
    Figure out what you did goofy and then do the opposite.
    Seriously, what have you done to troubleshoot this? There's any number of goofy things that you could do that may result in this issue. I'd start with reading the Kona manual and the rather extensive part in FCP about external monitoring.

  • Iphone does not get detected in windows 7

    Hi,
    Whenever I connect my iPhone to my lap, it does not gets detected.
    It enters into charging mode.
    But it gets detected in iTunes.
    How to make it detected outside iTunes ?

    hi..
    i also have a same problem..
    i am using windows7
    and none of my iphone gets detected..!!
    i have a iphone5 and 4s
    i also tried formatting my pc but em nt getting a solution for this..i tried all of the solutions listed in the thread..
    plzz help

  • L2L issue, the tunnel does not getting up from one direction

    Hello,
    We have configure a L2L vpn between Asa and 1841 router. We are facing this issue.
    The tunnel is not getting up from the 1841 site never. When we are trying to generate traffic from the ASA site the tunnel is up and we can see decryps and encryps packets.
    Router 1841 Config:
    crypto isakmp policy 100
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp key * address 213.249.XX.XX
    crypto ipsec transform-set XXXXX esp-3des esp-md5-hmac
    crypto map EKO_BG 100 ipsec-isakmp
    set peer 213.249.x.x
    set security-association lifetime seconds 28800
    set transform-set XXXXX
    set pfs group2
    match address 111
    interface FastEthernet0/0.2
    encapsulation dot1Q 3338
    ip address 212.200.30.130 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    crypto map XXXXX
    ip nat pool nat_pool 93.87.XX.XX 93.87.XX.XX prefix-length 29
    ip nat inside source list 101 pool nat_pool overload
    ip nat inside source static 10.70.2.10 93.87.18.161
    ip nat inside source static 10.70.25.10 93.87.18.162
    ip nat inside source static 10.70.36.5 93.87.18.163
    ip nat inside source static 10.70.39.10 93.87.18.164
    ip nat inside source static 10.70.5.10 93.87.18.165
    access-list 101 deny   ip 10.70.200.0 0.0.0.255 any
    access-list 101 permit ip 10.70.0.0 0.0.255.255 any
    access-list 111 permit ip 10.70.200.0 0.0.0.255 172.40.10.100 0.0.0.3
    Asa Config:
    access-list inside_nat0_outbound extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
    access-list outside_cryptomap_320 remark xxxxxxx
    access-list outside_cryptomap_320 extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
    access-list inside_pnat_outbound_V5 extended permit ip host 10.8.x.x 10.70.200.0 255.255.255.0
    pager lines 24
    nat (inside) 9 access-list inside_pnat_outbound_V5
    crypto ipsec transform-set xxxxx esp-3des esp-md5-hmac
    crypto map mymap 150 match address
    crypto map mymap 150 set pfs
    crypto map mymap 150 set peer XXXXXX
    crypto map mymap 150 set transform-set XXX
    crypto map mymap 150 set security-association lifetime seconds 28800
    crypto map mymap 150 set security-association lifetime kilobytes 10000
    crypto map mymap 320 match address outside_cryptomap_320
    crypto map mymap 320 set pfs
    crypto map mymap 320 set peer XXXXX
    crypto map mymap 320 set transform-set XXXXX
    crypto map mymap 320 set security-association lifetime seconds 28800
    crypto map mymap 320 set security-association lifetime kilobytes 4608000
    crypto map mymap 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map mymap interface outside
    isakmp policy 150 authentication pre-share
    isakmp policy 150 encryption 3des
    isakmp policy 150 hash md5
    isakmp policy 150 group 2
    tunnel-group 212.200.x.x type ipsec-l2l
    tunnel-group 212.200.x.x ipsec-attributes
    pre-shared-key *
    Please advise.
    Thank you.

    hello Ashley,
    thank you for this info. Now from the router site the tunneling is getting up and I can see packets but althought the tunnel is up it can not make telnet to our server (172.40.10.100) on a specific port.
    We from ASA site can ping router Site and make telnet.
    Any ideas???
    Thank you all from your answers!

  • Db tools open connection.vi does not get password from dsn file

    I am

    The database is a Microsoft SQL server database.  Again, my IT group does not want the password hard coded into the application.  Their preference would be for the password to be extracted from the dsn.  I have tried both a file dsn and a system dsn which were created in the data sources app in control panel --> administartive tools.  Neither dsn works (unless I wire the password to the databse tools open connection vi).  Both dsn's work fine from the windows data sources application.  I have not been able to figure out how to attach graphics to a post on the board here, so I 'm not sure how to attach the error message (or my block diagram).  The text from the error message is below.  Wiring in the password causes the error to go away.
    Error -2147217843 occurred at DB Tools Open Connec (String).vi->DB Tools Open Connec (Path).vi->FindShiftNumber.vi
    Possible reason(s):
    Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'eslprodsproc'. in DB Tools Open Connec (String).vi->DB Tools Open Connec (Path).vi->FindShiftNumber.vi

  • HP5640 All-in-one does not print photos from Windows Live Photo Gallery

    Setup printer using mobile device  Installed print driver using provided CD. Updated driver software. Printer is networked by wireless to computer & smartphone.Was able to print photo from smartphone, was able to print Word document from computer. Was unable to print photo from computer using Windows Live Photo Gallery. Used the HP troubleshooter, following all possible solutions to no avail. Selected the option of HP Photo Paper but it defaulted to the 8x11 paper tray. Can someone please help? Thank you!

    Hey , Welcome to the HP Support Forums!
    I understand that you're experiencing issues when printing from Windows Live Photo Gallery on your Windows 8 computer to your HP ENVY 5640 e-All-in-One Printer, as your prints continue to default to the letter size Paper Tray. I would like to assist you today with resolving this printing issue. Can I please have you follow the steps below to properly configure your print settings under the Print dialogue window in Windows Live Photo Gallery.  1. Load your Photo Paper in the Photo Tray on your printer  2. Open an image you would like to print under Windows Live Photo Gallery 3. Click on File and select Print   4. Under the Print dialogue window please ensure that your printer, Paper Size, Quality, and Paper Type are all set properly for your specific print job    5. Next, click on the Options button on the bottom right hand corner. Under the Print Settings dialogue box click Printer Properties.    6. Next, change the Paper Source to Photo Tray. If it currently is set to 'Main Tray' please click the Main Tray option and it will drop down to allow you to select Photo Tray. Click OK once the Tray change has been made.    NOTE: If the Paper Size shows an exclamation mark, it means that your Photo Tray does not support the Paper Size selected. Click the dropdown next to Paper Size and choose a size that does not show an exclamation mark.     7. Under the main Print dialogue window click Print on the bottom right   Your document should print as per normal now from the proper Paper Tray.   Please let me know if the steps provided resolve your Paper Tray photo printing issue. I look forward to hearing from you. Good luck!

  • Jar file is not getting executed from commandline

    Hi ,
    this is the weired problem i had.
    i have created a executable jar file.When i double click that file it is getting executed without any problem but when i go to command prompt and tries to run this jar by using folowing command
    java -jar myjar.jar
    it is giving me the error as
    Exception in thread "main" java.lang.UnsupportedClassVersionError:com/build/deploy/Deploy (Unsupported major.minor version 49.0)
    i am not getting why it is giving me this version error.
    can any body answer my question.
    i am using version JDK1.5 also program is running perfesctly from ecllipse IDE.

    I believe that something in your system is set up so that when you double click the jar, the correct java or javaw version is being used, but when you use the command line, an older version of java is being used.

  • Role Assignment does not get distributed from CUA

    Hi all.
    I create user and role in CUA client.
    There is no error in role generation.
    When I try to find my role in SU01 by pressing F4 of my role (Y*), system give me message role not found. But that's not my biggest problem.
    I can assign my role by typing manually.
    My biggest problem is only SAP ID get distributed into target system, not the role assignment.
    So in the target system I can see my user id without role assign to it.
    I checked my user id from SCUL. User and profile does not contain any error message in target client.
    I tried with transaction RSCCUSND, still my user id does not contain role.
    I checked my SCUM transaction, profiles and roles has Global settings.
    Does someone can give me a clue why this happens and how to solve this issue.
    Many thanks

    Lets try to simplify the thing in layman language.
    CUA is to manage user ids of different SAP systems (client level) centrally from one system without logging into each of those child systems. To do so, the Central system stores the information of the Roles (and their Text and Generated Profile Name ONLY) and Profiles (standard or non-generated profiles) in few of it's tables like: USLA04, USRSYSACT, USRSYSACTT, USRSYSPRF, USRSYSPRFT etc.
    It doesn't mean that the Roles for the corresponding child system is present in the central system and no need of creating (or making available) such roles in the Child systems. The physical existence of the Role for each system doesn't get transferred in the Central system when you do the Text comparison rather the identity only against the corresponding system.
    So the Roles has to be there in the corresponding Child systems and the Assignment (not physical assignment  -  only linking the name for that child system) of them to the user ids can be done from Central system.
    Also you have got the idea of Text comparison and requirement of keeping or creating roles in each system based on it's nature from the other posts.
    Let us know any more questions you have.
    regards,
    Dipanjan

  • File does not get updated in document library

    I'm encountering weird behavior which I hope you can suggest on how to further troubleshoot. There are some document libraries that whenever I upload a new version of a file, the file's contents do not get updated (when I open the file after check-in,
    it still shows the old content) but the Modified By and Modified fields get updated.
    Remote Blob Storage is turned on for our site; could it be RBS-related? However, only a few document libraries exhibit this kind of behavior.

    Hi Kev,
    There's no particular pattern in the differences between libraries exhibiting the behavior and those that do not. If it matters, the Style Library is experiencing this kind of behavior. We also have a document library renamed to "Images" (its URL
    is /Images) that also exhibits this behavior. I also tried disabling and enabling versioning, still the same behavior. I even tried deleting the file and reuploading with the same file name, still the same behavior!

  • I would like to be able to have any cookie I choose to accept on a given website be deleated as soon as I leave or close that website so that my surfing does not get tracked from site to site. I don't see an option for that. Is any one working on that?

    I don't want my surfing to tracked from site to site.
    Some sites require cookies be turned on in order to access the data I want or to perform a transaction.
    Right now, I have Firefox set to not accept cookies until I run into a site that requires cookies be accepted.
    Once I need to turn cookies on, I return to "Options" and select accept cookies but not 3rd party cookies.
    I will then be surfing along and occasionally check what cookies have been placed. There may be several placed I did not know were placed. I assume my surfing has been being tracked and I don't like that as a point of privacy.
    Is there a privacy setting I am missing, an application or extension I can download, or is the Mozilla team working on this as a feature?

    As far as I know, [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ the Classic Theme Restorer add-on] is the only way move the Reload button outside the address bar.
    # Install [https://addons.mozilla.org/firefox/addon/classicthemerestorer/ Classic Theme Restorer] and restart Firefox when prompted.
    # Open the Add-ons Manager (Ctrl+Shift+A; Mac: Command+Shift+A), then the Extensions category.
    # Next to Classic Theme Restorer, click the Options button.
    # On the Main tab, make sure "Movable back-forward button" and "Hide urlbars stop & reload buttons" are checked. You might also want to check "Combine stop & reload buttons". Close the options window when done.
    # Right-click an empty area of the tab bar and choose Customize.
    # Drag the Back/Forward, Stop and Reload buttons onto the navigation toolbar.
    # Click the Exit Customize button in the lower right corner when done.
    That being said, I should point out that you can reload pages in other ways.
    * Right-click any tab and choose Reload.
    * Right-click an empty area of the page and choose Reload.
    * Press F5.
    * Press Ctrl+R (Mac: Command+R).

  • A selected row in af:table does not get sorted.

    Hi,
    When a table supports single selection and the table contains quantity of rows gt it can fit into its viewport, then, on sorting, selected row gets out of the sorting process. But when you move to the end of the table, select a row there and then sort the table, then all rows sorted correctly. The selected row, after sorting, always set as a first row in the current viewport, doesn't matter whether it is in the order or out of it.
    Noteworthy, when number of rows is lt the viewport allows:
    1. sorting works as it should to;
    2. on sorting/PPR'ing, as it gets some time, one can see how the viewport updates in two steps and in the first step the first row is the selected one.
    JDev's version is 11.1.1.3.0.
    VO, iterator and tree bindings, af:table all the props related to data retrieving, fetching and row displaying have default values.
    What can cause that?
    Thx,
    Y.

    Hi,
    so what you are saying is that the selected table row is not sorted but added on top. I tried to reproduce this with 11.1.1.3 but can't see the issue. I tried with editable and read-only tables
    Frank

Maybe you are looking for