Files/Folders copied to 10.3.9 server are not getting proper permissions

If a user copies a file or folder to the server, occasionally it will only be available to them even though its parent folder is one shared to everyone with R/W access.
I've dug through the Workgroup Admin/sharing section and found the button to Propagate Permissions and ran that. I hope it fixes the issue.. However I was hoping someone could explain the difference between "Use Standard Unix Permissions" and "Inherit Permissions from Parent" options.
I found the 10.3.9 manual online and I can understand the inherit from parent option but the Unix one doesnt make any sense.
In our environment I would think the parent option would be best but the unix one is checked.
thanks
Mike

Note that even under "inherit" permissions, the
'owner' of the new file/folder will be set to the
user who created it. The owner is not inherited. This
has relevance when you start to create permissions
structures for access to folders/files. If you use
the simple inherit permissions model, then you have
to base your permissions structures on the group
permissions, not the owner.
-david
I was following you until the last sentence. Could you explain "basing your permissions structures on the group
permissions, not the owner"
Mac OS X (10.3.9)

Similar Messages

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
tt2

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Nohup.log files are not getting generated correctly

hai,
im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
<Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
java.io.IOException: Disk quota exceeded.
java.io.IOException: Disk quota exceeded
at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

On my computer I have folders in my email accounts but they are not on my iPad when I go into mail how do I get my folders in my iPad?

On my computer I have folders in my email accounts but they are not on my iPad when I go into mail how do I get my folders in my iPad?

https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/offerOptOut

Sub items are not getting copied into excise invoice

Hi Guru's
I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
Kindly suggest me how can I copy subitems into excise invoice from billing document.
Thanks & Regards.
Swamy H P

Hi Lakshmipathi,
Thank you so much for the response.
Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
Thanks & Regards,
Swamy H P

How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer." My computer is authorized

I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong? I'm missing about 100 songs as a result of this error!!

See:
iTunes Store: About authorization and deauthorization
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
Could the items be purchased by another account?

Files are not getting posted in destination directory,how to trace in XI

Hi,
our scenario is proxy to file.
We are posting files of .TRG and .DAT format in destination directory.Due to less space in destination directory, files only .TRG files are getting posted but .DAT are not getting posted.but i have checked in XI system SXMB_MONI,no error message is coming.message is getting processed successfully.
why it is not visible and to monitor that files are not saved at the destination.
Is this normal with XI that we can not see of files are really saved?

Hi,
> it should generate two files as per scenario but only one file is getting generated due to less space,
NO.
If No Space, The error will pops out in RWB .
Check the directory of the File Adapter you are using
Regards
Agasthuri Doss

Valid from and Valid to are not getting copied to follow up document.

Hi Experts,
I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
But I need to transport the dates from Master Quote to Job Quote.
Please advice.
Thanks,
Adi.

Hi,
You need to implement CRM_COPY_BADY for that. Please refer to:
Re: create a new follow up complaint to the earlier completed complaint
Regards,
Nicolas.

J2EE Server is not getting started exit code -11113

Hi,
J2EE Server is not getting started, the exit code is -11113. When I tried to start J2EE Enginer Visual Administrator its giving below error.
Unable to lookup connection default.
https://SAPXI:8101/msgserver/text/logon returned empty list of connection parameters.
Please help.
Thanks,
Nishant

Go to the following directory.
/usr/sap/<SAPSID>/<Instance_Name>/j2ee/admin
and start the go.bat.
Java Add-In You cannot use the Default login. Instead, perform the following steps:
a) Choose New.
b) Enter a display name and choose Direct Connection to a dispatcher Node.
c) Choose Next.
d) Enter at least the following:
■ User Name: J2EE_ADMIN
■ Host: <host_name> of the J2EE engine
■ Port: <P4_Port>
The following convention applies for the port:
5<Instance_Number_of_SAP_J2EE_Engine>04. For example, if
your J2EE instance number is 15, the P4port is 51504.
e) Choose Save and connect with your new login account by choosing
Connect.
f) Enter the password for the J2EE_ADMIN user and choose Connect.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

The files I am converting from PDF to XLSX are not readable? Why?

The files I am converting from PDF to XLSX are not readable? The files looks like hieroglyphics Why?

It seems like there is a problem with this file format.
Would it be possible for you to send me the document?
So that i can have a look what is the actual problem persisting.
You can e-mail me at : [email protected]
Thank You

Files/Folders copied to 10.3.9 server are not getting proper permissions

Similar Messages

Maybe you are looking for