Files for re-installation Acrobat x standare

I buy Acrobat Standard 2010 in a Dell Desktop. I have the original serial number. Upgrade from w7 to W8.1 has deleted the installation of Acrobat. How can i do? Thanks

Hi Alexgab,
If it's a Dell machine you have bought and the software was bundled with it then you can visit the site https://smartsourcs.dell.com and login.
Make sure you're running it from the Dell computer that had the license. It will install an IE ActiveX control to determine your system info, and then will take you to a downloads page where you can download all the software your computer was licensed for.
Hope this helps!
Regards,
Rave

Similar Messages

I need to download installation files for my Adobe Acrobat Standard 9.5.5.

I need to download installation files for my Adobe Acrobat Standard 9.5.5. There are no links to be found for this version on the adobe site..
I have two licenses for adobe acrobat, but cannot find my software. Any help with a direct link to the standard version would be helpful.
The professional version does not work with the standard licens.

if you purchased from adobe, log in to your account and check your order history, https://www.adobe.com/account.html
if you acquired via dell, https://smartsource.dell.com/
if you purchased elsewhere, contact the vendor.

Sysidcfg file for unattended installation with proper IP addressing

Hi,
I've been running jumpstart installation for several Sunfire V210 and V280Rs. I did use the following sysidcfg file but it's complaining regarding NOT finding Jumpstart Directory and subsequently fails to comply with rules file. Though the ./check verification did gave me a okay signal but the [I guess] ip addressing/subnet mask scheme is causing trouble. I'm in the same subnet. I happened to google a lot on this, almost everyone had problem with ip addresssing and subnet mask. With this current sysidcfg, the system prompted for default route, for once!
Can someone please share a working sysidcfg file for an unattended installation?
# my current sysidcfg file
system_locale=en_US
timezone=US/Central
terminal=sun-cmd
timeserver=localhost
root_password=test
network_interface=bge0 {netmask=255.255.0.0
protocol_ipv6=no}
security_policy=none
name_service=none
Initially I was using following directive; it couldn't find the jumpstart directory. I even tried removing "default_route", didn't help much.
network_interface=bge0 {hostname=test1
                       default_route=10.1.1.253
                       ip_address=10.1.1.1
                       netmask=255.255.0.0
                       protocol_ipv6=no}
Here is my log ...
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from blade150:/opt/jumpstart.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"... <--- Somewhere here it prompted for default route.
Begin script install_begin execution completed.
Processing default locales
- Specifying default locale (en_US.ISO8859-1)
Processing profile
- Selecting cluster (SUNWCXall)
Installing 64-bit Solaris packages
- Selecting locale (en_US.ISO8859-1)
- Selecting all disks
- Configuring boot device
- Configuring / (c0t0d0s0)
- Configuring swap (c0t0d0s1)
- Configuring /mirror (c0t0d0s3)
- Configuring /usr (c0t0d0s4)
- Configuring /var (c0t0d0s5)
- Configuring /opt (c0t0d0s6)
- Configuring /export/home (c0t0d0s7)
- Deselecting unmodified disk (c0t1d0)
Verifying disk configuration
Verifying space allocation
- Total software size: 1363.53 Mbytes
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
<snip>
After that all worked fine.
In case should you need to see my /etc/bootparam file, here it is ..
# /etc/bootparam
test.testserv.org root=blade150:/opt/jumpstart/Solaris_9/Tools/Boot install=blade150:/opt/jumpstart boottype=:in sysid_config=blade150:/opt/jumpstart install_config=blade150:/opt/jumpstart rootopts=:rsize=32768
Can you please highlight what went wrong?
TIA
Raqueeb Hassan
Bangladesh

Heres the sysidcfg file we use
system_locale=en_AU
terminal=vt100
security_policy=NONE
name_service=DNS {domain_name=anu.edu.au name_server=150.203.1.10,130.56.4.1 search=anu.edu.au}
network_interface=bge0 {hostname=talwood ip_address=130.56.64.131 default_route=130.56.64.1 netmask=255.255.255.0 protocol_ipv6=yes}
timeserver=localhost
timezone=Australia/NSW
But it appears similar enough to what your using. But I can assure you that it works correctly.

Patch file for update Adobe Acrobat 9 standard

Hello
PCs in our company using Adobe Acrobat 9 standard.
This application is installed on WinXp Japanese.
I read from http://www.adobe.com/support/security/bulletins/apsb09-10.html request for Adobe Acrobat Standard and Pro 9.1.2 and earlier - Windows user should update system immediately and I also download AcrobatUpd933_all_incr.msp for
But when I run thí patch I receive error such as error in program version, this PC exists update program already ( I'm sorry I haven't written down exactly the sentence because it's Japanese )
What should I do know? Do I have to upgrade my Acrobat? If needed please teach me the correct patch file?

You must install updates IN ORDER, not just the latest one
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

Install files for Photoshop CS2 & Acrobat Pro 7.0

I recently lost my install disks for these two programs during a move. I had a backup of the install files (.dmg) for both but accidentally deleted the folder because I ran out of space on my backup drive. I was hoping someone could point me in the right direction on where I might be able to download the install files. I have valid licenses for both and have that information written down, but clearly in the event I have to do a reinstall of my OS, I'll not be able to install Photoshop or Acrobat. I am on a Mac Pro, OS X Leopard version 10.5.5. Any help is appreciate. Thanks Jen

Contact Adobe for replacement files or disks.

Applying new license file for existing installation

Hi experts,
I have installed Sybase ASE 15.7 SP110 Developer Edition (DE) on a VM running RHEL 6.2 for x86_64. Now my company purchased a license for Enterprise Edition and my manager sent me a license file (*.lic). Now I'm wondering if I can apply this new license on my existing installation. If yes, could someone point me to the detailed steps to do that?

re: lmutil lmhostid ...
Make sure you've sourced the $SYBASE/SYBASE.sh script before running lmutil lmhostid; also make sure you've sourced this file before trying to start up your dataserver and backupserver.
re: license 'upgrade' ...
Making quite a few assumptions (eg, this is a unserved license; the manager entered the correct hostid when generating the license; the license is appropriate for your vm in terms of license type and number of licenses; the new license isn't a subcapacity license; etc, etc, etc) ...
If your dataserver is up and running you can use the sp_lmconfig stored proc to change your license information. In particular you're looking to reset the edition type (PE) and license type (LT) settings to match the settings in your new license.
If your dataseerver is down/not-running, you can make the same changes by updating the $SYBASE/ASE*/sysam/<DSQUERY>.properties file. Using an ascii text editor (eg, vi) you want to change the PE/LT values to match what's in your license. [I typically go ahead and remove all of the lines that look like hex code values.] [Obviously (?) make a copy of the <DSQUERY>.properties file before you edit it.]
Where it starts getting tricky is when my list of assumptions are incorrect, eg, manager generated a served licensed (so you may need to setup a license manager), manager used the wrong hostid (in which case the license will need to be turned in and regenerated with the correct info), you've got a subcapacity license (in which case you'll likely need to make some other changes to the <DSQUERY>.properties files ... assuming the correct subcap license tag/id was provided when the license was generated), etc, etc, etc. [And you may want to find a few chickens ... for sacrifices to the SYSAM gods ... just in case.]

How to create the patch file for Printer installation?

Hi,
Recently I bought a network printer and really want to install printer via the batch file, but I don't know how and what command needs to be typed in Notepad.
Could you please give me some templates for this?
Thanks,

Hello avocado0227,
Please take a look at the following thread about Batch File to install printer.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/372a3334-904e-4506-a63d-20ccd487ff05/batch-file-to-install-printer?forum=ITCG
As you want to use the batch file to install printer, to receive better support, it is recommended to post in the TechNet script forum.
The professionals there will be glad to help you.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I Open an HTML file for iOS?

How do I open an HTML file for iOS using acrobat?

This is a forum for Adobe Reader for iOS. Acrobat doesn't run on iOS. You need to run it on a Mac or Windows computer. In Acrobat, you can choose File > Create > PDF from Web Page to do what you want. You cannot do that in iOS.

How can I add .html file to my installer?

I am creating an installer to put my compiled executable on a customer's computer. The application also does web publishing, so I must include the following files:
niwebserver.conf
WebPub.ini
WebPub.alias
etc..... No problem there as the installer selects and includes those files.
I must also include the file "C:\Program Files\National Instruments\LabVIEW 8.6\www\WebPub.html" and then have it installed into the directory "C:\Program Files\National Instruments\LabVIEW 8.6\www" on the customer's system as this is where the webserver is pointed.
I want this all transparent as trying to get the customer to grab the file out of one directory and figure out how to put it in the correct directory would not go well....
Hints??
Solved!
Go to Solution.

Hi!
I'm not sure you can get rid of the physical path problem in 8.6. In 9.0 NI added a variable $LVSERVER_ROOT to their web config file.
The path turns out to be:
[Program Files]\National Instruments\Shared\LabVIEW Run-Time\www
The best you can do is the path [Program Files] for the installer. See my post here: http://forums.ni.com/ni/board/message?board.id=170&message.id=439052#M439052
I write a step-by-step on how to do what you want in LabVIEW 2009. Might work for 8.6 too, but I seem to remember some tweaking was required.

So how to specify different answer file for different install images in WDS snap-in?

hello
in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
now this one answer file applies to all of them ?
so how to specify different answer file for different install images in WDS snap-in?
thanks in advanced

Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
have a personal unattend-file.
hi Joel
very cool. thanks a lot, that really helped me.
best regards

Where is the installer files for Acrobat 9 Pro Extended EN,FR

New computer, I lost my CD but have my key recorded. Where can I get the installer files for "Adobe Acrobat Pro Extened - English, Francais"???

Hi Jesse ,
Try this once and see it it helps .
Go to the web page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en
Login with your Adobe ID and Password. Now instead of clicking on the download button copy and paste the following link on the address bar and hit enter : http://trials2.adobe.com/Applications/Acrobat/APRO/9/trials/AcroPro90_efg.exe
This is the direct download link for Acrobat 9.
This link would only work from the downloads page of Acrobat 10.
Regards
Sukrit Dhingra

Anyone that could help me find installation files for Acrobat Standard 8?

I am trying to find and download installation files for Acrobat Standard 8 - I have the serial number - but I can only find the files for the Professional version, unfortunately. Anyone know where I can find for Standard version?
I have used this link but it only gives me the professional version, unfortunately:
http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html

I believe there are no downloads available for the older versions of Acrobat Standard.

Serial number adobe has on file for me for my Adobe Acrobat 9 pro is not working

I lost the installation disc for my long time love Acrobat 9 pro. I checked with adobe and the serial number they have on file for me is not working on my downloaded version of 9 pro. I have a running copy of the software on another machine.
How can I solve this problem?

start here, http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
if that info fails to resolve the problem, contact adobe support https://helpx.adobe.com/contact.html

Is the installation file for adobe reader, the same for all the versions of windows ? Is it ?

Hello,
I want to know if the installation file for adobe reader is it the same for all the windows ?
It is because I have to do an automatic installation for XP, seven and windows 8...
It is also the same between 32bits and 64bits ?
Thanks.
Best regards
Sofia Luna

It may be worth mentioning two things.
1. Adobe provide extensive information on Enterprise Deployment of Acrobat and Adobe Reader.
2. You may well need a redistribution license to do this, if you are installing on behalf of anyone (accepting EULA for them), pushing, or hosting etc.

Where can I get a download file for Adobe Acrobat X Standard?

I need a download file for Adobe Acrobat X Standard. I have an installation CD & serial # that was never activated, but the computer I'm trying to put it on does not have a CD drive. Is there anywhere I can find a download file for this?

As long as it is not a Mac there is a chance the download can be found on the following page:
Download Acrobat products | Standard, Pro | XI, X
I say "a chance" because Acrobat Standard tends to be an issue when it comes to download availability ... give it a try.

Files for re-installation Acrobat x standare

Similar Messages

Maybe you are looking for