Files for the internet

Hi,
Can someone tell me how I can go about putting the video I created in Final Cut Pro on the internet? Do I need a special format or are the readily available for posting?

H.264 is widely accepted.
Compressor includes a YouTube preset to make and upload the files.
You can find instructions on the various hosting sites as to what they specifically use, including time and size limits.

Similar Messages

Convert Quicktime files or FC Pro projects to Flash files for the internet

I've never done this before. I have finished FC Pro projects that I need to convert to flash files for the internet. Am I saying that right? I've converted them to QT files. What's next? Thanks

This site and the readme links and forum can help you display it on the web, works great with Flash or H.264.
http://www.jeroenwijering.com/?item=JWMediaPlayer

Streaming large quality files for the internet?

I was watching an episode of Masterpiece theatre from their website yesterday, I have a imac 27 inch and the quality was good with no starts and stops. I uploaeded a video done in Imovie, exported it to quick time, the length of the video is about 2 and a half minutes, the file size is 72 megs, looked great but the video would start, stop and start again. I went back with the same video in imovie, exported it to quick time, this time using a different quality, the final size is 32 megs , plus or minus, It plays fine, but I know if I made it full screen it would not be that sharp. I forgot to mention that I watched the Masterpiece theatre at full screen on my imac
any hints?
John

Masterpiece theatre is not a progressive download. It's played off a streaming server and the media never leaves their machines. In progressive download the media will start playing as soon as the browser things it has enough to play back before the download runs out. This very seldom works properly unless you have an exceptionally fast connection. The only ways around this are to use a streaming server, which can also hiccup if the connection speed lags, or to have the media download fully before playback begins.

Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all

I upgraded to the lastest version of Flash to fix what I thought was a problem in Firefox. That problem turned out to be something else but now Safari will not play ANY flash content. I have uninstalled and reinstalled several times. I have even installed an older version. All of these have the exact same result. Flash works in Firefox but not in Safari. I have cleared the cache. I have gone into the flash securty settings and deleted all content. Nothing seems to change this. Anyone have any ideas?

Plug-Ins are installedand keep in mindthis problem affects all 3 browsers i am using IE9, Safari5 & Firefox 19NOT a SPECIFIC browser issuewhich is why i think it's either "Flash" (Adobe) or streaming web-site (Freedocast) issue.
Date: Mon, 1 Apr 2013 01:25:24 -0700
From: [email protected]
To: [email protected]
Subject: Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all
    Re: Safari shows "The network connection was lost" for all flv files on the internet. Firefox plays all
    created by Sunil_Bhaskaran in Installing Flash Player - View the full discussion
Have you enabled plug-ins in Safari?Could you please go through the last question of Mac section in the following URL: http://helpx.adobe.com/flash-player/kb/flash-player-faq.html#main-pars text1 Thanks,Sunil
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5195274#5195274
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5195274#5195274
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5195274#5195274. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to download a file from the internet using terminal

how to download a file from the internet using terminal
does any one know how to download afile from the internet using the Terminal application?

Use curl. Something like this:
curl -O http://www.example.com/filename.zip
For more info, type +man curl+.

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

How can I download a file over the internet from a WebDAV server?

I am trying to download a file over the internet from a WebDAV server. I've tried doing it with Datasocket as suggested in these articles,
<a href="http://digital.ni.com/public.nsf/websearch/f3cc5f7e60a75cb2862567e700696abf?opendocument">Retrieving an Unformatted Text File via FTP or HTTP Using DataSocket</a>
<a href="http://digital.ni.com/public.nsf/websearch/4FA09E7B3674DA34C1256BD400555C41?OpenDocument">Download a Text File from a Password Protected URL Using DataSocket</a>
but all I get is error 1181 (protocol unrecognized by Datasocket).
I know I have the URL correct, because I can put it into a web browser and it works fine - I can download the file manually.
But I want to have a LabVIEW program do the download automatically.
I have the internet toolkit, but don't have the foggiest clue how to use it, and am using LabVIEW 7.1
I am a bit out of my depth here, so any advice welcome.
Regards,
Mark.

MIG,
What is the URL to the website? Is it an FTP site? The articles you referenced are for specific transfer protocols. If the stie you're trying to get to doesn't follow these protocols, then you'll get the error you're seeing. You may have to use ActiveX to control IE and download the files programmatically.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

PDF files on the Internet won't open...thanks to new Adobe update?

I'm running OS 10.6.8 on a MacBook Pro. I installed Adobe Reader 10.1.3 and now can't open any pdf files on the Internet. Before I spend $39 calling an Adobe tech, I wonder if anyone can help?

Yachna: Thank you for your post of April, 18, 2012. You wrote:
"If you are using Firefox, Please try launching Firefox in 32 bit modeWe don't support firefox in 64-bit mode
->Go to Applications
->Command click Firefox app to open the context menu
->Choose Get Info Check ‘Open in 32-bit mode’
Launch Firefox now and try to open a pdf. This should work
For Safari,
Please launch your Safari in 64 bit mode and then try viewing/printing the pdf. We don't support Safari 5.1 in 32-bit mode.
->Go to Applications
->Command click Safari app to open the context menu Choose Get Info
->UnCheck ‘Open in 32 bit mode’
Launch now and try to open a pdf. This should work"
In my case, the problem occured only when I used Firefox. I followed your advice in that regard and retried opening several pdf's that previously would not display. All did display in 32-bit mode for FireFox. Your statement that "We don't support Firefox in 64-bit mode." and your self-description as "Emploee" lead me to think that you are an Adobe employee. I'm new to all this, so sorry if my inference about who you are is wrong. But if it is correct, then your advice would seem to be from-the-source-credible. I hope that in the future, Adobe will support Firefox in 64-bit mode.
One question though: If, as you state, Adobe does not support Safari 5.1 in 64-bit mode, why haven't I had the same problem displaying pdf's with version 5.1.5 Safari? Only guess I can make at that is that as of Safari 5.1.5 (vs. Safari 5.1), Adobe does support Safari in 64-bit mode. Anyway, thank you! And I hope that in my newness to all this, I haven't confused things too badly.

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

I apparently got stung with the Adobe flash virus. Now I cannot open any .pdf files from the internet.

I apparently got stung with the Adobe flash virus and now I cannot open any Adobe .pdf files from the internet. Fix?

Go to F_Secure's Flashback Removal Tool web page, download their Flashback trojan detection/removal tool, and follow the instructions you find there.
Also install the latest java update which also tries to remove these trojans.
Java for OS X Lion 2012-003
And only download the adobe flash plugin from the adobe site.
Update:
Just because you cannot download pdf may not be an indication of the trojan. There's been a number of reports about problems like that with pdf's. Look at the More Like This section on the right side of this page.

Opening pdf files from the internet. through reader

hi, i am able to open pdf files from email and any pdf files i create. i just cant access any pdf files from the internet...it closes the page completely. can anyone help?

I have a similar problem when trying to e-mail from a pdf program. For one thing, I cannot save anything on it and then when I tried to send it (with filled in forms), it arrives blank.

I cannot download any files from the internet

Hi-
I am operating on Windows 7 Home Premium
IE 9.1
Model PSKA8U-02900R
Norton AntiVirus
I get an error message every time I try to download a file from the internet. All types,This has been happening for about 6 months, but I've used my work computer instead..getting kinda old.
The message simply states "This file could not be downloaded"
I've seen similiar posts, but no resolution posted. Anyone out there able to help me solve this issue?
Thanks Jane

Satellite L855-S5240
reset IE settings to defaults and turn on smart screen filter.
Control panel, internet options, advanced, restore advanced settings, apply.
If that does not take care of it reset all settings to defaults:
Control panel, internet options, advanced, reset.
Then select tools from your toolbar, smart screen filter, turn on smart screen filter.
Satellite L855-S5240 support page is here - http://support.toshiba.com/support/modelHome?freeText=PSKA8U-02900R
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Files for the internet

Similar Messages

Maybe you are looking for