Files from soundtrack pro play really slow in FCP

I tired searching the threads and couldnt find an answer
I'm trying to lay down a music bed in FCP before i edit a sequence.
I went into SOundtrack pro and listened to it.. looping music bed 40.aiff
sounds awesome.
go over to fcp.. click on import and i find the file amongst my libary and stuff
then i laid it into my sequence and the playback is really slow.
i can;t figure it out.
any help guys?

Sorry it took so long for you to find an answer, happens sometimes. Your bump can bring the wrath of the forum curmudgeons down upon your weenie little head but you got a good response to a post that got lost off the bottom of the page.
You're going to find digital video is full of weird little gotchas like this audio sampling rate thingy. Frame rates. And pixel aspect ratios. And color spaces. &c. I remember when video was just luminance.
bogiesan

Similar Messages

Adding files from external HD is really slow (30min for 7,000 songs)

I have finally mangaged to add files to my laptop from my external HD (which by the way shift+loading itunes never worked for windows) but loading 7,000 songs takes about 30min. Is it because I don't have a high speed USB on my laptop? My USB from my 250gig external has a 2.0 USB. Could that be the reason?

USB 2.0 is "high speed" USB (480 Mbps). If by chance you are using USB 1.1, then yes, file transfer is going to be dreadfully slow. I couldn't see any information about your PC in your profile but... if you are using USB 1.1 OR if you have an older hard drive (slow RPM and write speeds) you are going to bottleneck. You did mention that you have a laptop; laptops (even newer ones) often use slow drives (4200 RPM drives are common.) A NICE thing to do for read/write speeds is to upgrade your laptop's hard drive to a 7200 RPM drive. You can do that for around $100.00 via newegg.
~( ):>
iMac 233MhZ Biondi blue 96MB of RAM Mac OS X (10.3.9)

Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
Edgil

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

Macbook pro runs really slow after sleep mode

My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regards

Hi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 172
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Hotspot Shield
    [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
        /System/Library/Extensions
    [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
    [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
    [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.epson.eventmanager.agent.plist [Click for support]
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
    [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Documenten    Map (/Users/[redacted]/Documents)
    uTorrent    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Save to Pocket
    Awesome Screenshot
    URL Advisor
    Virtual Keyboard
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Squeezebox [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
    Destinations:
        My Passport [Local]
        Total size: 999.83 GB
        Total number of backups: 17
        Oldest backup: 2013-11-06 17:55:38 +0000
        Last backup: 2014-10-14 11:30:39 +0000
        Size of backup disk: Adequate
            Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
        15%    mds
         5%    WindowServer
         0%    ocspd
         0%    fontd
         0%    kav
Top Processes by Memory: ℹ️
    223 MB    kav
    198 MB    Safari
    155 MB    Mail
    137 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    3.45 GB    Free RAM
    3.05 GB    Active RAM
    1.11 GB    Inactive RAM
    974 MB    Wired RAM
    1.64 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
    Feb 4, 2015, 07:18:08 PM    Self test - passed
Hope this will shed some light on the problem.

Exchange audio files in Soundtrack Pro

Im experimenting with mastering audio files in Soundtrack Pro 3.0.1.
I am wondering if I can swap audio files in and out of the same project file - so I can keep the same STP effects settings while changing the audio file version from v1 to v2. Does this make sense?
As a side question... would it be better to convert the output from 24 to 16 bit (and dither it) in Soundtrack, or let that happen when it imports into iTunes?
Thanks for helping a complete stranger. That always amazes and inspires me.

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Trouble with the round trip from Soundtrack Pro 2 to Final Cut Pro

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

Exporting from Soundtrack Pro - Trouble

I am having problems exporting from Soundtrack Pro. I haven't had these problems before.
I have tried to export a track to MP3 and to Compressor but all I get is the Exporting window and that's as far as it goes. It says, 'Time Remaining: Estimating...' but then that's it. I had even left it for a few hours and still nothing happened.
The program isn't frozen, just the export isn't working. Is this a common problem? Can it be fixed?
Many thanks.

I have the same problem...
I finished working on a project and when I tried to export it - it would start out just, tell me that it would be done in less than a minute and the just suddenly stop 1/4 of the way for no reason. Same thing happens whatever I do - in the same exact place. I spent a lot of time finishing this edit so I really want to get it back to FCP.
Can anyone help?

Reconnect Media from Soundtrack Pro

I exported a clip from FCP to Soundtrack Pro and cannot seem to Reconnect Media in FCP; when I go through the selection process to reconnect in FCP; I can pick it but the clip is still declared offline/missing. How do I get this fixed using FCP or Soundtrack Pro? Thanks.

Matthew Owen2 wrote:
I am trying to export a single track with audio from Soundtrack Pro. When I select File>Export, all of my export options are grayed out. I've tried highlighting the track and that didn't work. Any thoughts?
Is the menu item *File > Export* greyed out?
If so, it's probably because you have the audio open in the audio file editor. The only option from here is to Save As.
If you put the audio in a track of a multitrack project then File>Export should be available to you.

M2v video files in Soundtrack Pro

Good day everybody. I encountered the following problem: Soundtrack Pro works very slow and unstable if I use m2v video.
Any comments?
Thank you.
Message was edited by: M-Serhio

I know But it takes a superfluous time to transcode .m2V files to QT. But it seems I have to do this next time. Any comments more, maybe?

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

How to transfer files from MacBook Pro pages app to iPad mini pages app?

How to transfer files from MacBook Pro pages app to iPad mini pages app?

The above assumes you are running current software.
Mac - OX X 10.9.2, Pages 5.1.
iPad - iOS 7.0.6, Pages 2.1.

How do i save files from mac pro to an external hard drive

how do i save files from mac pro to an external hard drive

Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
Tuxera NTFS 2012.3.2
NTFS for Mac OS X 9.5.3
To repartition:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on new iMac.

Transfered files from Mac Pro to iMac OS10.7. Copied bookmarks using "backup and restore" from "Organize bookmarks". File copied correctly as bookmarks 10-10-11.jsom, but would not restore on Firefox on new iMac.

Firefox 2 versions use the file bookmarks.html to store the bookmarks.
See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
With Mac OS X 10.4 you can use Firefox 3.5 or 3.6
* http://www.mozilla.com/firefox/all.html
* http://www.mozilla.com/firefox/all-older.html
*http://www.mozilla.com/en-US/firefox/system-requirements.html
*http://www.mozilla.com/firefox/system-requirements-v3.html

How do I import into Photoshop touch a PSD file from sketchbook pro mobile?

How do I import into Photoshop touch a PSD file from sketchbook pro mobile?

I don't believe you can at this time. The only way to get PS Touch to import a PSD is to upload it to Creative Cloud first (but even then it'll flatten any layers).

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other

I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other.
Any ideas?
Barry

Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton

Files from soundtrack pro play really slow in FCP

Similar Messages

Maybe you are looking for