Files get disconnected after removing advanced pulldown?
What does this message mean during import of a file.
http://screencast.com/t/OF4mSwA90
I got this problem after removing advanced pulldown on standard 24p footage. All the files were crossed out in the browser. i deleted them and re-imported but some are left out with that message on manual import.
The file plays fine in QT but suddenly won't import after attempted removing of advanced pulldown to all clips in the browser. The ones that remained 29.97 due to the inability of Cinema Tools to properly remove the advanced pulldown are the ones giving me the error on import.
Similar Messages
-
Removing Advanced Pulldown from AVI files
I've recently switched from Vegas 4.0 to Final Cut Pro 5.1 and I'm trying to remove the advanced pulldown from my AVI files. I tried using Cinema Tools and it could not use the AVI. Then I tried using FCP tools/remove advanced pulldown option and the file went offline. Can sombody tell me how to do this?
ThanksIt wasn't out of sync before. I shot it on the Panasonic DVX100 in 24pa. Removed the pulldown and edited the film in Vegas. Now I want to transfer it to FCP change it to 16X9 and make a 16X9 24P DVD in DVD Studio Pro. When I did copy it back to tape from Vegas I used LP instead of SP so I could fit the entire movie on a mini dv tape. Maybe that has something to do with it not being able to remove the pulldown during capture? I think I'm going to try and split it up into 2 tapes and record sp mode.
Mac Pro 2.66 Mac OS X (10.4.7) FCS -
Problems removing Advanced Pulldown frames
I'm relatively new to 24PA, until now, I have captured quite a few projects now without any problems. The footage is always shot DVCPRO 50, I use the Panasonic AJ-SD93 Deck to capture the footage, selecting "remove advanced pulldown frames" in the FCP capture settings, and end up with great 23.98 progressive advanced footage.
The most recent project I've been working on, we received tapes that were shot by the same production group, same settings, same camera, and I was capturing with the same deck, same FCP settings, etc...however, after capturing, the files were not 23.98, but 29.97 (as a test, I captured from tapes in a previous project, it immediately came in as 23.98).
I tried to solve the issue after the fact by selecting the "Remove Advanced Pulldown" selection in the tool menu and received the error message *"File does not contain frames encoded using Advanced Pulldown".*
The 29.97 footage, based on my knowledge, seemed to indicate that it was, in fact, 24PA. For two reasons, one - every fifth frame in the 29.97 footage was a "split" frame, and two, breaking the footage down into fields, it seemed to have the 2-3-3-2 cadence associated with 24PA. However, for whatever reason, Final Cut could not find the cadence.
Why might this be?
I'd appreciate any informed opinions, but I can say that my guess is it has something to do with timecode and timecode breaks. The footage had an awful lot of timecode breaks and the timecode was being forced. I am wondering if this has something to do with why FCP could not pick up the cadence in the footage. (The only other variable that changed from previous successful 24PA projects is that these tapes were dubbed, and perhaps the dub house - which has shown itself prone to the occasional mistake - messed something up, but in this instance, don't see any evidence of that.)
Ultimately - I worked around the issue just fine, but it only makes matters more confusing, I brought the footage into Cinema Tools and did a Reverse Telecine (3:2 pulldown) and the footage turned it into clean-looking 23.98 progressive footage. Like I said before, analyzing the footage appeared to reveal that it was certainly 24PA with a 2-3-3-2 cadence and not 24P with a 2-3-2-3 cadence.
Any thoughts are welcome, thanks -Just a thought: if the dub house made the dubs over SDI or analog, then the 24PA "flags" that were on the originals were likely not retained. That may be why FCP isn't seeing the pulldown cadence. I believe the only way to retain those advanced pulldown flags is to dub via firewire.
You can try capturing at 29.97 and running the files through Cinema Tools. Or see if the production company can send you the camera originals.
Jay -
Why doesn't "remove advanced pulldown" work?
I have several large files captured directly from my XL2 in 24p Advanced mode and when I import them into FCP 5.1.2, the "remove advanced pulldown" menu item complains that there's no puldown in these files.
They're large (an hour each) dv files. about 10-12GB each. And they definitely have pulldown in them. Cinema Tools reverse telecine fixed 'em up just fine.
Any ideas? Thanks!Interesting.
A little more background...
I am trying to implement a "poor man's" hard disk capture system. I run the firewire cable from my XL2 into my Powerbook and was using iMovie to record to a .dv file whilst simultaneously recording to a DV tape. I think my mistake was using iMovie instead of FCP. But the strange thing is that one of my events I recorded worked fine, and FCP's 23.98 timeline caused the video to be rendered beautifully as 24P. But the other one had nasty interlacing artifacts that lead me to believe the file wasn't captured well.
Anyway...I will try this again using FCP's capture now, and see if I can use a capture preset that removes pulldown as it goes.
One question: if I really don't want pulldown, should I be recording in ordinary 24P on my XL2?
Thanks!
Mac Pro, G5 Dual, 12" PB G4 -
How to Remove Advanced Pulldown?
Some camcorders, such as the Panasonic AG-DVX100A (which is what I have), are designed to shoot in progressive mode at 24 fps (literally 23.98 fps) and then record the video to tape as a 60-field interlaced signal by applying a special kind of pull-down called advanced 2:3:3:2 pull-down. With previous versions of Final Cut, you could remove the redundant fields created by the camera’s pull-down, so that you can edit at 23.98 fps or 24 fps.
This was done previously by the following:
In Final Cut Pro, select the clips or sequence.
Choose Tools > Remove Advanced Pulldown.
How do I do this in Final Cut Pro X?
These menus do not exist and when I drop a previously existing clip into a new project there are duplicate frames (whether I choose to create the project properties based on the properties of the first clip imported or I specify manually I want it to be a 23.98p timeline), meaning that FCPX has not removed the pulldown automatically.
When I import a clip from tape/source then FCPX handles it correctly.
But there needs to be an option to fix this in already existing clips that have been imported prior to the existence of FCPX without re-importing all the footage.well, in case anyone else who uses a dvx100 has this problem with previously imported 16x9 24pA .AVI files that you want to use in FCPX here is what i had to do. use compressor. convert each of the AVIs using these settings:
Name: FC
Description: DVX 24pA AVIs to MOV in FCPX 23.98P timeline
File Extension: mov
Estimated size: 11.05 GB/hour of source
Audio Encoder
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
Video Encoder
Width: 720
Height: 480
Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
Crop: None
Padding: None
Frame rate: 23.976
Frame Controls On:
Retiming: (Fast) Nearest Frame
Resize Filter: Linear Filter
Deinterlace Filter: Reverse Telecine
Adaptive Details: Off
Antialias: 0
Detail Level: 0
Field Output: Progressive
Codec Type: DV/DVCPRO - NTSC
Multi-pass: Off, frame reorder: Off
Scan Mode: Interlaced
Aspect Ratio: 16:9
Pixel depth: 24
Spatial quality: 100
Min. Spatial quality: 0
Temporal quality: 0
Min. temporal quality: 0
Compatible with Mac -
Problem removing advanced pulldown
Hi There,
I have some 24p footage I digitized at 29.97 by accident. When I go to the tools menu and select "remove advanced pulldown" i get an error that says "break in advanced pulldown cadence (pattern) found near t." Any ideas?Are you certain it's 24PA and not 24P?
You might be able to break it into smaller chunks with QT Pro and try removing advanced pulldown on that, but that's just a shot in the dark...
Patrick -
Remove Advanced Pulldown and Reverse Telecine...
Hey guys,
I have read all the hundreds of postings here about problems with removing advanced pulldown. Some people mention using compressor to get the clips to 23.98. I was happy to find that indeed compressor did get the clips that I couldn't remove pulldown in FCP on to 23.98, and that those clips play on the same timeline as my other 23.98 clips. HOWEVER, the clips that were reverse telecined, then brought into FCP play with a stroby effect... There's weird horizontal lines through them. Anyone know what is going on? I guess I will start re-logging and capturing the clips as shorter clips and then try to remove the advanced pulldown on them (from what I understand FCP can't remove the pulldown if there is a cut within a clip...) but if anyone knows of an easier way to deal with this, let me know. I am working with 50 hours of footage, probably 5 of which I couldn't get the advanced pull down off of, so it's a lot of work! Thanks!I found this answer to one of the posts about removing advanced pulldown problems:
"Are you certain it's 24PA and not 24P?
You might be able to break it into smaller chunks with QT Pro and try removing advanced pulldown on that, but that's just a shot in the dark..."
Patrick
Can someone explain how to use Quicktime Pro to break the clips into smaller chunks without going through and re-logging and capturing all over? Although, I already put all the clips that didn't get the pulldown removed in FCP through cinema tools to make them 23.98 too...I suppose this will make it impossible for me to use the QT PRo method...I am losing days of work here making smaller and smaller clips out of this material by logging and capturing over and over so I'm desperate to make sure there's not an easier way around this...
Outside of when you are tranferring to film, does anyone have a really good reason to shoot 24pA on the dvx100? With this project it was definitely a mistake! -
Wifi gets disconnected after sometime while watching youtube on iPod Touch.
When I'm watching video on youtube, the wifi network suddenly gets disconnected after some time.
Even when I goto settings->wifi, I'm unable to find the wifi network.
However, at the same time I can find the wifi network and am able to browse internet on my laptop and mobile phone. I get the wifi network back, on when I switch off wifi and switch it after some 2mins of time.- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- Does it happen with other networks?
- Next would be to restore the iPod. -
Remove Advanced Pulldown and Duplicate Frames
I've been researching this but still have not figured it out:
When I import Canon XF100 footage shot in 24fps from my CF card into FCP 7, in the "Log and Transfer" window under "Preferences", should I check or uncheck "Remove Advanced Pulldown and Duplicate Frames"? My thought was to uncheck the box since it is a function specific to P2 cards and that it wouldn't make a difference either way for my footage. Also (and I could be wrong), I didn't think any pulldown was necessary since I was shooting in 24fps. However, when I examined 2 test clips taken through both paths, there was one noticeable difference: the unchecked clip is larger (644.8MB) than the checked (582.8MB). Hmmmm....
Does this mean the footage changes based on if that box is checked or not?
And in my shooting/import scenario, should I check or uncheck that box?
Thank you.23.98 and 23.98
> I have a few different cameras and some need pulldown and some don't but I've always left it checked under the > assumption that if there's nothing to pulldown it can't/won't and everything has been fine.
good to know. i agree. based on my conversations with the canon xf software folks, they were not entirely sure whether or not to check the box, so it doesn't seem to be a significant impact on the work flow.
thanks all for your input. -
Wi-Fi is getting disconnected after idle time
I have following configuration:
Model Name: MacBook Air
Model Identifier: MacBookAir6,2
Processor Name: Intel Core i7
Processor Speed: 1.7 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Boot ROM Version: MBA61.0099.B04
SMC Version (system): 2.13f7
After upgrade, Wi-Fi is getting disconnected after idle time of 1-2 Minutes. Are other users facing similar issue. Please help.On or the other should solve your issue.
http://support.apple.com/kb/HT4199
http://support.apple.com/kb/HT4628 -
Call is getting disconnect after 3 min when the caller is in queue
Hi,
I am using icm 7.0 with ip ivr 7.0. when all the agents are busy and caller is in queue,call is automatically getting disconnected after 3 min with the message " We are experiancing system problem and unable to process the call. please try again later" .
Icm and ivr script are attached
Regards,
Dinesh JoshiHi Chrish,
you are right. the timer was for 180 sec only. now things are working fine after increasing the timer.
Thanks a lot for your reply.
Regards,
Dinesh Joshi -
My incoming calls on my iphone 5C get disconnected after the first ring. Please help!
My incoming calls on my iphone 5C get disconnected after the first ring. Please help!
I had this problem too with my newly bought iPhone 4s.I went to a technician shop to ask what the problem is and they said they could fix it however they would charge £35 and I believed this was too much. I was playing around with my iPhone to see if I could fix this problem I went on setting the clicked on the music section at the music section there is the button called sound check which was off so I decided to turn it on . After I turned it on my sound came back I was ecstatic I saved myself £35 and having to return the phone.
-
FIX for USB issue where Files get corupted after I sucsessfully transfer to N
MP3 Player: Muvo N200 GB
Firmware: Creative MuVo Micro N200 Audible Firmware Upgrade .2.0
OS: Windows 2000 pro
Machine: Ibm Thinkpad
PROBLEM:
drag a folder of MP3's to the N200 in the Windows Explorer
2 wait for the zig zag line on the MP3 player to go straight.
3 Stop the Muvo mass stoarge device
4 Unplug the USB from the computer
5 Turn the Muvo N200 on
6 Folder has vanished
7 Plug Muvo back into computer
8 Folder is there, all files are missing
Also .. if I plug the Muvo in right after I coppied the files (after step 4) the files exist. I dragged them to the desktop, compared them to the originals with a binary compare and they are identical ... just to see if the files got corrupted.
It seems that when I turn the Muvo on, the files get deleted.
I then installed the N200 Media Explorer with drivers .. didn't help at all.
I tried this on a different machine, exact same files, and it works fine. Same OS, no Media Explorer.
Also, this is my second N200. Sent the other one back after talking with support. Got an error at the end of a format. When I tried to install the .2 firmware, I could no longer turn the player on (didn't try recover). I'm sure this N200 will do the same on my thinkpad. I installed the firmware on the other machine (fool me once ....)
EDIT: <FONT color=#cc9900>Further testing showed that this is a problem with my thinkpad. The N200 works fine as a thumb dri've on every other machine I tried. I tried using another thumb dri've on my Thinkpad and it failed in the same way. Also tried a Muvo NX .. just for kicks and it didn't work either.
<FONT color=#cc9900>FUnny thing is that I can copy a file to the N200, read it back right away .. compare them and they are identical. ONce I remove the dri've, and plug it back in, the file is corrupted.
Message Edited by chrisjc on <SPAN class=date_text>06-03-2005 <SPAN class=time_text>03:5 PM
Message Edited by chrisjc on <SPAN class=date_text>06-03-2005 <SPAN class=time_text>03:54 PM
Message Edited by chrisjc on 06-3-2005 0:26 PM:smileyvery-happy:My N200 now works on my thinkpad, and I just have to report on what I did to fix it .. just in case this helps anyone however indirectly.
In the device manager, I changed all Host controllers from
Intel 8280CA/CAM USB Uni'veral Host Controller
to
Strandard Uni'versal PCI to USB Host Controller
And now My USB not only works on my N200, it also fixed an issue with my USB scanner.
HOW TO DO THIS:
Right Click on the My Computer ICON
select MANAGE
select Device Manager in the left hand column
expand Uni'versal Serial Bus Controller in right hand column
Click on Intel 8280CA/CAM USB Uni'veral Host Controller and
Select Driver Tab and select Update Driver
Next ... select radio button that says Display a list of Known.....
then select Standard...
do this for all Host controllers.
Good luck ... I've been through everything if you want to send me a message. -
File sizes explodes after removing hidden information
After removing hidden content in Acrobat Pro X (Tools/remove hidden content or Tools/sanitize) the file size increases, up to 10x (2 MB -> 20 MB). Save as optimized PDF only partly reduces the problem, file is still 3-4x the initial size. Document was created with Adobe PDF writer, but this problem occurs in principle also with other PDFs. Bug? Necessary? Workaround? Any help is appreciated. Thanks in advance!
Any one found a solution to this problem?
I'm having it too, acrobat xi pro 11.0.10...
Original file size before cropping ~27MB
Same file saved as optimized PDF before cropping ~12MB
Original file size after cropping ~27MB
Same file saved as optimized PDF after cropping ~12MB
Original file saved as some other file name after removing hidden information ~60MB
Same file saved as optimized PDF after cropping AND after removing hidden information ~60MB
What on earth is going on? -
Call gets disconnected after playing the menu from CVP
Hello,
When I make a call, the call is going to the ICM and then it is coming to the Call server then to the VXML gateway and then it goes to the VXML server and plays the promt.
The problem i am facing is that once the menu audio is played the call gets disconnected. It doesnt let me choose any options. I feel it is not able to identify the my inputs
I have some debug outputs
Mar 1 01:09:03.095: //-1/C113522D805A/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=1000
----- ccCallInfo IE subfields -----
cisco-ani=sip:[email protected]:5060
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=sip:[email protected];transport=udp
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
Interface=0x67213130, Call Info(
Calling Number=sip:[email protected]:5060,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=sip:[email protected];transport=udp(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Un
R1#known, FinalDestinationFlag=TRUE,
Incoming Dial-peer=811, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=65
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
In: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Mar 1 01:09:03.103: //-1/C113522D805A/CCAPI/ccCheckClipClir:
Out: Calling Number=sip:[email protected]:5060(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: :cc_get_feature_vsa malloc success
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: cc_get_feature_vsa count is 1
*Mar 1 01:09:03.103: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 1 01:09:03.103: :FEATURE_VSA attributes are: feature_name:0,feature_time:1732532552,feature_id:23
*Mar 1 01:09:03.103: //65/C113522D805A/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown))
*Mar 1 01:09:03.111: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
Event=0x67452800
*Mar 1 01:09:03.119: //65/C113522D805A/CCAPI/ccCallSetContext:
Context=0x65097114
*Mar 1 01:09:03.119: //65/C113522D805A/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 65 with tag 811 to app "_ManagedAppProcess_bootstrap"
*Mar 1 01:09:03.143: //65/C113522D805A/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
*Mar 1 01:09:03.147: //65/C113522D805A/CCAPI/ccCallConnect:
Progress Indication=NULL(0), Data Bitmask=0x0
*Mar 1 01:09:03.151: //65/C113522D805A/CCAPI/ccCallConnect:
Call Entry(Connected=TRUE, Responsed=TRUE)
*Mar 1 01:09:03.239: //65/C113522D805A/CCAPI/cc_api_event_indication:
Event=141, Call Id=65
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_event_indication:
Event Is Sent To Conferenced SPI(s) Directly
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
Destination Interface=0x0, Destination Call Id=-1, Source Call Id=65,
Caps(Codec=0x0, Fax Rate=0x2, Vad=0x2,
Modem=0x0, Codec Bytes=20, Signal Type=2)
*Mar 1 01:09:03.243: //65/C113522D805A/CCAPI/cc_api_caps_ind:
Caps(Playout Mode=1, Playout Initial=60(ms), Playout Min=40(ms),
Playout Max=250(ms), Fax Nom=300(ms))
*Mar 1 01:09:04.163: //65/C113522D805A/CCAPI/ccCallHandoff:
Silent=FALSE, Application=0x6773AB4C, Conference Id=0xFFFFFFFF
*Mar 1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms)
*Mar 1 01:09:04.295: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
Call Entry(Inter Digit Timeout=0(ms), Initial Digit Timeout=0(ms))
*Mar 1 01:09:04.295: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:04.299: //65/C113522D805A/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=65
*Mar 1 01:09:04.303: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:04.307: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
*Mar 1 01:09:04.311: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=0(ms), Inter Digit Timeout=0(ms))
*Mar 1 01:09:05.291: //65/C113522D805A/CCAPI/ccAssociateStream:
Coder=5, DTMF Relay=4, Vad=0,
Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:05.295: //65/C113522D805A/CCAPI/ccAssociateStream:
Call Entry(Stream Status=2, Digit Enable=TRUE)
*Mar 1 01:09:05.327: //65/C113522D805A/CCAPI/cc_api_call_associated:
Interface=0x0, CallId=65, Disposition=0
Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
*Mar 1 01:09:05.531: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms)
*Mar 1 01:09:05.535: //65/C113522D805A/CCAPI/ccSetDigitTimeouts:
Call Entry(Inter Digit Timeout=10000(ms), Initial Digit Timeout=5000(ms))
*Mar 1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/ccCallReportDigits:
(callID=0x41, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:05.535: //65/C113522D805A/CCAPI/ccCallReportDigits:
Enabled=TRUE, Call Id=65
*Mar 1 01:09:05.535: //65/xxxxxxxxxxxx/CCAPI/cc_api_call_report_digits_done:
(vdbPtr=0x67213130, callID=0x41, disp=-4, digit_event=0x1, enable=TRUE, consume=FALSE)
*Mar 1 01:09:05.539: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
Enabled=TRUE, Disposition=0xFFFFFFFC, Interface=0x67213130, Call Id=65
*Mar 1 01:09:05.543: //65/C113522D805A/CCAPI/cc_api_call_report_digits_done:
Call Entry(Initial Digit Timeout=5000(ms), Inter Digit Timeout=10000(ms))
*Mar 1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:08.723: //65/C113522D805A/CCAPI/ccDisassociateStream:
Call Entry(Stream Status=1, Digit Enable=TRUE)
*Mar 1 01:09:08.735: //65/C113522D805A/CCAPI/ccAssociateStream:
Coder=5, DTMF Relay=4, Vad=0,
Record Function=0x0, Event Queue=0x66954714, Stream Context=678B0364,
Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:08.739: //65/C113522D805A/CCAPI/ccAssociateStream:
Call Entry(Stream Status=2, Digit Enable=TRUE)
*Mar 1 01:09:08.747: //65/C113522D805A/CCAPI/cc_api_call_associated:
Interface=0x0, CallId=65, Disposition=0
Play Function=0x62C2DFA8, Codec=0x5, Vad=0x0
Media Type=0x3, SPI Context=0x678D2480, Stream CallId=66
TX Dynamic Pt=0x0, RX Dynamic Pt=0x0
R1#
R1#
*Mar 1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
Record Context=0x0, Stream Call Id=66, Call Id=65
*Mar 1 01:09:16.143: //65/C113522D805A/CCAPI/ccDisassociateStream:
Call Entry(Stream Status=1, Digit Enable=TRUE)
*Mar 1 01:09:16.175: //65/C113522D805A/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
*Mar 1 01:09:16.179: //65/C113522D805A/CCAPI/ccCallDisconnect:
Cause Value=16, Call Entry(Responsed=TRUE, Cause Value=16)
*Mar 1 01:09:16.227: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
R1#Disposition=0, Interface=0x67213130, Tag=0x0, Call Id=65,
Call Entry(Disconnect Cause=16, Voice Class Cause Code=0, Retry Count=0)
*Mar 1 01:09:16.235: //65/C113522D805A/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
*Mar 1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 1 01:09:16.235: :cc_free_feature_vsa freeing 67445940
*Mar 1 01:09:16.235: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 1 01:09:16.235: vsacount in free is 0
I have some basic VXML gateway configuration
R1#show run
Building configuration...
Current configuration : 2588 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 5
ip cef
no ip domain lookup
ip domain name lab.local
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
voice service voip
sip
header-passing
application
service cvperror flash:cvperror.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service new-call flash:bootstrap.vxml
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service ringtone flash:ringtone.tcl
paramspace english language en
paramspace english index 0
paramspace english location flash
paramspace english prefix en
service ringback flash:ringtone.tcl
service handoff flash:handoff.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
service bootstrap flash:bootstrap.tcl
paramspace english index 0
paramspace english language en
paramspace english location flash
paramspace english prefix en
archive
log config
hidekeys
interface FastEthernet0/0
ip address 192.168.1.253 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
control-plane
dial-peer voice 9191 voip
service ringtone
session protocol sipv2
incoming called-number 91919191
codec g711ulaw
no vad
dial-peer voice 9292 voip
service cvperror
session protocol sipv2
incoming called-number 92929292
codec g711ulaw
no vad
dial-peer voice 1503 voip
destination-pattern 1503
session protocol sipv2
session target ipv4:192.168.1.57
dtmf-relay rtp-nte h245-alphanumeric h245-signal
codec g711ulaw
ip qos dscp cs3 signaling
no vad
dial-peer voice 100 voip
destination-pattern 10..
session target ipv4:192.168.1.100
dial-peer voice 811 voip
service bootstrap
session protocol sipv2
session target sip-server
incoming called-number 81T
codec g711ulaw
no vad
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
end
Please help me out how o fix this issue/Thanks for the respose
The microapp what I use is user.microapp.ToExtVXML[]
This is the activity log in the CVP application. I dont see any error logs.
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,newcall,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,ani,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,areacode,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,exchange,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,dnis,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,uui,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.109,,start,iidigits,NA
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.125,CVP Subdialog Start_01,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.593,Greetings,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.597,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Greetings,exit,done
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.703,Menu,enter,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.707,Menu,interaction,audio_group,initial_audio_group
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,Menu,exit,
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,how,hangup
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,result,normal
192.168.1.57.1368611401109.0.ImationIVR,05/15/2013 15:20:01.875,,end,duration,1
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,newcall,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,ani,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,areacode,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,exchange,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,dnis,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,uui,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,,start,iidigits,NA
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.531,CVP Subdialog Start_01,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.921,Greetings,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:06.957,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Greetings,exit,done
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:20:07.109,Menu,enter,
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,how,app_session_complete
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,result,timeout
192.168.1.57.1368611406531.1.ImationIVR,05/15/2013 15:50:25.718,,end,duration,1819
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,newcall,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,ani,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,areacode,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,exchange,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,dnis,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,uui,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,,start,iidigits,NA
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.312,CVP Subdialog Start_01,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,CVP Subdialog Start_01,exit,done
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.750,Greetings,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.782,Greetings,interaction,audio_group,initial_audio_group
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Greetings,exit,done
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:22:56.937,Menu,enter,
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,how,app_session_complete
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,result,timeout
192.168.1.57.1368611576312.2.ImationIVR,05/15/2013 15:53:25.718,,end,duration,1829
Thank you
Maybe you are looking for
-
Profit Center populated in FBL5N Report
Dear Friends, our client is asking for getting profit center in the customer line items where in the view FBL5n we are not getting the profit center populated in the report, but our business is not satisfied with report and expecting that profit cent
-
Performance Tuning "Select All" vs "Select Then Delete"
Dear Experts, Please tell me which one has better prefromance between SELECT a~vbeln a~kunnr a~bukrs_vf a~vkorg a~vtweg a~spart a~augru a~vbtyp a~auart a~bstnk
-
How can delete dublicat records
can someone tell me how can I do that delete dublicate records. Thanks
-
I can't send mail and I can't delete mail.
I just can't send mail but receive it just fine. As well, deleting mail is a problem.
-
Period dimension error in EPMA
Hi, We recently imported the ads file using "replace" option in the import profile and we get the below error when we try to deploy the planning application. Tried to reassign the Begbalance member. But still not resolving the problem. Error : Period