Files imported but could not be renamed?

I have just installed Lightroom version 4.4 onto my iMac running Snow Leopard. I tried to import 120 photos from my Nikon D5100. I was copying the photos as Copy as DNG files. Everything seemed to go fine, but on 12 of the photos I got the following error message "some import operations were not performed. The following files were imported but could not be renamed."
This morning I tried to import some files from my hard drive, this time I chose to copy, again everything seemed fine and then I got the same error message on five of the photos. The files are there but they just appear as a grey thumb nail.
Can anyone help me with this problem.
Thanks
Abuderek

Similar Messages

Error message: "the following files were imported but could not be renamed"

Trying to import photos and keep getting error "the following files were imported but could not be renamed." Any help would be appreciated...using Lightroom 3 still ( I know I know) and importing into lightroom with a backup copy to computer harddrive.
Message title was edited by: Brett N

Peter I am also experiencing the same error message. Here is my situation:
I am using Lightroom 4.
I have duplicated images across multiple harddrives.
I am trying to import these using 2 seperate 2 terrabyte hard drives ( 1 for lightrooom the other as my image backup drive).
I am using keywords and embedding the keyword into the new backup file name. Hopefully provide some organization.
I am using the MOVE option in my import process.
Have he images that were not renamed moved to the new backup drive? Are they they under the original file name?
I want to end up with a common lightroom catalog and single backup file structure as my photo repository.
What am I doing to trigger the above message and what suggestions might you have with regards to my lightroom organization approach?
Any insight and recommendations to my situation would be greatly appreciated.. Thanks, Jay

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Unreadable Files - The following could not be imported

I have saved images off a photo sharing site to a jpeg format only about 52KB in size. After I have saved the images I tried to import into iphoto and get the msg "Unreadable files - The following could not be imported" After reviewing the info on the file there is nothing different then files that have imported successfully.
I have tried to resave the file and also checked to ensured that nothing is locked and it is a usable file. Also to see how other files work with the import I tried deleting a image recently imported from my camera and import it again from the IPhoto library folder and then received the same msg. However there are other random images that will import.
Any help or advice anyone could provide would be wonderful. I'm wondering if there is a limitation on IPhoto I am not aware of.
Thanks

I had this exact problem after I upgraded to OS X 10.4.11 and iPhoto 5. It took me two days to figure out it was with Quicktime. When I went to Software Update under the Apple Menu, there was a security update for Quicktime listed. When I installed that, iPhoto went back to working perfectly.
Obviously this update isn't just a security update alone.

I try to import contact from sim card, but could not do, can any one help?

i try to import contact from sim card, but could not do, can any one help?

Either the contacts were not actually stored on the SIM, the SIM memory is defective, or they are in a format not useable by the iPhone.
Go to one of your carrier's stores. Most carriers have equipment that can do this, see if they can extract them for you.

Error: File just captured could not be read and was deleted after capture.

I was just recording an extremely important interview. I have recorded literally 10.000 recordings before with the same setup, every day, over a period of some three years now. I'm recorging DV PAL through SDI input on a AJA KONA LS card.
It seemed to be going well last night while recording but as soon as I pressed 'Esc' to end the capture I got an error message saying (not exactly in these words) : Error: The file just captured could not be read.
The file couldn't be found anywhere on the HD or in the trash. Usually when something goes wrong during capture, you can find the file in the capture folder named 'filename-av'. Not this time, I have never seen this error message before.
The person being interviewed was absolutely furious and said he would not do the interview again. So I'm up against the wall here, and need to recover the files.
What's more, the problem still persists. When I try capturing again, as soon as I stop the same error occurs. So now my FCP is not capturing anymore
I tried running Data Rescue 3.1 and found the recording in deleted files, but:
1. the recording is in several parts (not sure if it's all there, but probably most of it)
2. Data Rescue 3 interprets the files as .dv files, as opposed to .mov files as all my other recorded material.
3. THERE IS NO AUDIO IN THE .DV FILES, which pretty much nullifies the file recovery altogether.
I tried googling this error, but it did not help much:
1. None of the people were capturing the same way I do (most were capturing from tape, none straight through KONA SDI input)
2. There was no solution to prevent the error.
3. No solution to recover the files either.
I must say, this experience really taught me the essence of Murphy's law: 'Anything that can go wrong, will go wrong at the worst possible moment'
Any suggestions as to the reasons for this?
Any suggestions as to how the files can be recovered?

Good news!
I beleive I have found the cause and solution. At least now I am able to reproduce the problem at will and therefore, hopefully prevent it.
I discovered that there is nothing wrong with my AJA KONA setup, as I was able to capture with both QuickTime movie capture and Adobe Premier just fine. But every time I try capturing in FCP I get unreadable capture files (since 2 days ago).
Trying all possible capture settings, capture presets or easy setups did nothing. (although capturing thru Firewire still works every time).
I was about to give up when I noticed that where I usually have my video scopes window running, for convenience sake, under it the Voiceover utility was running.
So here is the deal: Usually when you try and capture with the Voiceover utility running, you can't. FCP wont allow you to capture, it will return an error message saying: 'Log and capture can not be opened while Voice Over is running. Please close Voice Over and try again.' As it turns out, this warning is probably for a good reason.
BUT...
If you shut down FCP with Voice Over running and start it up again THEN you CAN run Log and Capture at the same time... everything looks OK, until you stop the recordin, then you get an error message saying your recording is screwed.
I tried this over and over again, every time it behaves the same way. Shutting down with VO util>starting up again>recordings get screwed .. close VO utility>back to normal operation.
I'm not sure if it was the VO utility the last time this happened (few weeks back), but it might very well be. I might not have noticed that the VO utility was running as it was hidden behind the videoscopes and there are no warnings when running Log and Capture if you start up FCP with VO utility still running.
My educated guess to what is going on is that the VO utility is taking up priority over the sound inputs and by doing so making the audio of the capture unreadable. This theory is supported by the fact that when my data recovering experts found the recordings on the HD, there was no audio on the files, but the video was intact.
The only reason setting up the AJA drivers helped in the past was probably because that flushed the FCP settings and in doing so closed the VO utility window. How very ironic
Hope this helps someone out there. And I hope Apple find a way to prevent this from happening.
cheers!
Vidar F.

HP scanning error: "An error has occurred saving the file because it could not be written to..

HP scanning error: “An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.” Dr. Google finds others with this problem. Some claim that this is caused by an upgrade of Apple OS10 (which I did do). One claims that HP has a "patch" for this problem. If I try to quit HP scan, it won't quit and freezes my computer. Here's the odd thing. I have no problem scanning in a colored page from Scientific American either before or after this error (after rebooting each time), but simple black and white documents started just today to give the error message above.

Thank you for the link however if I understood all of the instructions I would still be reluctant to try this on my own especially from a third unknown party where some of the information may be wrong and/or lost in translation. (Google translation at the end of this comment). The instructions say to uninstall the software. So if I uninstall the original HP software am I using the original disk to reinstall and then personalize again?What about all of the updates since I originally installed the software? I found the Disk Utility but what is "gatekeeper"And I am using OS X 10.9.1 that is current because I downloaded the latest upgrade. How would I reinstall it?And at what point do I go to the URL for the software drivers and the patch? This is just not practical for someone who is not proficient in troubleshooting applications.I switched to Apple because I don't want to have to go through this kind of process, take my time to fix the application and potentially mess up my system . WHy should I have to try to figure out how to retrieve the normal function in this case, of my All-In-One. If it is so simple why can't HP develop the fix and make it available? Unfortunately right now I have to find an alternative to scan some important business documents that are due today. Since I am using an older printer by technology standards even though it is working fine I may be looking for a replacement and HP may no longer be at the top of my list given that the problem appears to affect other HP models. No need to answer my questions, I'm not going to try this fix based on these instructions. Please HP provide a fix for this problem with the scanner and MAC OS X 10.9.1 compatibility! Translation of the information on the suggested link: We hereby send you a guide that should help you in solving the problem .Please carry the following: 1 Please uninstall the software again .Goto -> Programs - > Hewlett -Packard - > HP Uninstaller 2 Please repair permissions on your Mac .Go -> Utilities -> Disk Utility - > Repair Disk Permissions . 3 Please disable ' gatekeeper ' on your Mac . 4 Reinstall the full software for MAC 10.6 and patch for 10.7 / 10.8 / 10.9. HP Scanjet Software and Drivers for Mac OS X v10.6 features :http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dsj_78355_5 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken
Scanjet software patch to Use OS X 10.6 Software and Driver on OS X:http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/ ? sp4ts.oid = 457 534 & spf_p.tpst = swdMain & spf_p.prp_swdMain = wsrp - navigationalState 3Di % dx % 253D % 257CswItem % 253Dcs_97791_1 % 257CswEnvOID % 253D219 % 257CitemLocale % 253D % 253D % % 257Cs wLang 257Cmode % 253D % 257Caction % 253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me

I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me

Limitation of XP, videos over 500MB's can't be imported using Camera/Scanner wizard. Try transfering these Videos directly from your phone by selecting them in My Computer and dragging or copying the movie files to your computer's hard drive.

Selected file system item could not be found

I have an issue with a volume that seems unrelated to the other post to which I replied here. This particular volume is an extra slice/partition on the primary software RAID drive (simply made up of two internal drives).
When I select the Volume from the Volumes tab/list in Server Admin I receive an exclamation mark at the bottom with the error: "The Selected file system item could not be found"
Each time that I try to press the Share button and actually set the properties for it and Save and then refresh the shares, that volume is never shared. Seems like an odd issue as there do not appear to be any problems with the volume otherwise.
I

I am getting the same error message, but only on my Xserve RAID volume. I'm able to adjust permissions on anything else. I currently do not have the option of reformatting the RAID volume right now.
What my initial assumption is that this RAID used some complicated permissions and was connected to a OS X 10.4 Server. I did not do an upgrade to the server but a full format and reinstall of OS X 10.5 Server. My workaround to date has been to change he permissions in the Finder but that's a real pain.
I've tried renaming the volume and a few other tricks.
I'm not sure what to do next to get the OS X 10.5 Server Admin to work with the permissions on my RAID.

This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank you

This worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

"An error has occurred saving the file because it could not be written to. Check ..."

I have the familiar Mavericks issue of failing to save scanned files from my Mac:
"An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only."
As far as I can see, there has been no resolution to this issue, despite reassurances dating to last fall (2013).
The support website acts funky, too, sending me around in circles when I try to download the drivers; it may be a Safari-only problem, but still, please fix your software!

Hi,
What is your printer model? what Mac OS X version?
Have you tried scanning with Image Capture or Preview?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I logged in to fb but could not 'work' anything, changed browser to chrome google and everything worked, why is this?

I could login, could read everything on fb but could not 'work' on fb, could not 'like', not post, not access anything.
My tech suggested changing from firefox to chrome google and everything worked.
Only other problem is that windows has taken over the posts of my photos and I can't see the photos now, just little green box in middle of screen unless I click on the box and it opens up the photo. How do I get my photos back now, as well.
Am going back to firefox once more to see if everything is cleared up.
Any suggestions about getting photos 'released' would be good.
Thank you in advance.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Files imported but could not be renamed?

Similar Messages

Maybe you are looking for