Files in Photoshop

Hello all,
I have this script bellow and it's do all right but, when it
complete the action in Photoshop the script stop.
I would like to know if, my delete line is in wrong place.
i Guess yes but, i don't know where i have to put this.
Thanks
set input to choose folder
tell application "Finder"
if not (exists disk "Share Name") then
mount volume "afp://Goku.local./Bordados"
end if
end tell
tell application "Finder"
set filesList to files in input
end tell
repeat with aFile in filesList
set fileIndex to 0
tell application "Finder"
set theFile to aFile as alias
set theFileName to name of theFile
end tell
tell application "Adobe Photoshop CS"
activate
set display dialogs to never
open theFile
tell the current document
do action "Bordado" from "Bmp"
end tell
end tell
end repeat
end adding folder items to

Hack,
I would like to know if, my delete line is in wrong place.
I don't see any 'delete line' in your script. Is that the problem?
Reese

Similar Messages

  • How do I save an install file for Photoshop CS6

    I need to get an install file for Photoshop CS6 (not CR) that I can use on a Windows PC that, due to security reasons, does
    not have access to the internet.  In the past I have been able to save the install file for Photoshop and/or Lightroom on my internet connected PC and then move it to the the target PC on a thumb drive or CD.  But now with the CC and the new "Adobe Installer" I can't seem to see how to capture the install file. 
    Please let me know how to do this.
    dan

    Refer to this:
    Direct Download Links for Adobe Software
    Mylenium

  • I can not open the file in Photoshop...

    I can not open the file in Photoshop after formattatto pc.
    I get the following error "could not complete your request because there is an error in the program
    Please me!
    Thank you

    Version CS3
    Adobe DNG Converter and Camera Raw 4.6 update
    6.2MB
    10/10/2008
    Camera Raw 4.6 update
    3.5MB
    10/10/2008
    Camera Raw 4.5 update
    3.5MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.5 update
    6.1MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.4.1 update
    5.4MB
    4/10/2008
    Camera Raw 4.4.1 update
    3.3MB
    4/10/2008
    Camera Raw 4.3.1 update
    3.3MB
    11/15/2007
    Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
    72.8MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.3.1 update
    6.1MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.2 update
    5.9MB
    9/13/2007
    Camera Raw 4.2 update
    3.2MB
    9/13/2007
    Camera Raw 4.1 update
    3.2MB
    5/30/2007
    Adobe DNG Converter and Camera Raw 4.1 update

  • Can't open .NEF files in Photoshop CS2

    Heres the deal: I've updated and installed my camera raw in Photoshop CS2, so I have the latest version of it (ACR 3.7). I still can not open my .NEF files in Photoshop and when I view the files from Bridge it shows the generic thumbnail image.
    Information that might help:
    PS Version: Photoshop CS2
    ACR Version: Camera Raw 3.7
    Camera: Nikon D60
    Operating Sys: Mac OSX
    Any help would be greatly appreciated. Thanks.

    The D60 was not supported in ACR 3.7.  In fact, that version was the first to support the D40.  You will have to use the latest version of the DNG converter to convert your raw images to DNG.  Then you can open those files in ACR 3.7.

  • Unable to see DNG files in Photoshop CS2

    Hi:
    I am using Photoshop CS2 in Windows XP Pro and have *.CR2 pictures taken with Canon EOS 40D.
    I downloaded Camera_Raw_3.7.zip and extracted Camera Raw.8bi to C:\Program Files\Common Files\Adobe\Plug-Ins\CS2\File Formats
    I downloaded Adobe DNG Converter ver. 4.3.1 and converted the Canon CR2 files to DNG files.
    I can see the pictures in Adobe Bridge CS2 1.0.4.6 fine.
    However, when I open Adobe Photoshop CS2 and try File/open, the drop down does not show any selection for DNG files. If I try to physically drag a file into Photoshop, I get the message that the extension is not supported.
    Upon opening Help/About Plug-In, I do not see Camera raw anywhere in the long list.
    What do I need to do to bring DNG files into Photoshop?
    Thanks.

    If you don't see Camera Raw in the list it usually means that it is not in the correct folder or the it might be damaged.
    It looks like you listed the correct folder at C:\Program Files\Common Files\Adobe\Plug-Ins\CS2\File Formats
    When you navigate to that folder do you see Camera Raw.8bi listed? It might only say Camera Raw, depending on how you have Windows set up.
    Did you restart Photoshop after putting the filter into the File Formats folder?

  • I can't open .CR2 files in Photoshop CS4

    I'm unable to get the .CR2 files from my new Canon Rebel T3i to open in Photoshop CS4.  I just got this camera and I never had this problem with my old camera (Rebel Xsi).  The raw files from the Xsi will still open, but not the ones from the new camera.  Can anyone help me understand why this is happening?
    Thanks,   Jo

    Mollysnoot wrote:
    Your only option is to upgrade or use the DNG convertor.
    Just to be perfectly accurate, that would be two options. 
    To use the free Adobe DNG converter, you would download and install the very latest version then whenever you want to edit raw images you'll go through a process something like this:
    1.  Upload the .cr2 files from your camera into a folder on your hard drive.
    2.  Run the DNG Converter application and select the folder (it works on folders, not files).
    3.  Convert all the .cr2 files to .dng files.
    4.  Open the .dng files into Photoshop CS4 through the Camera Raw dialog.
    Download links:
    Adobe DNG Converter for Mac OS
    Adobe DNG Converter for Windows
    -Noel

  • I can't open .avi files in Photoshop CS5

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

  • Can't open CR2 files in photoshop and camera raw

    This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
    I have:
    Photoshop CS4
    Camera Raw CS4
    Canon 5D Mark ii
    I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

    Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
    After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
    I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
    I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update )  this is the one for the Canon 5d Mk2
    After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
    This led me to the video.
    To the point.
    Download the update and save to a location where you will remember.
    open Adobe photoshop and go to "edit"
    Them " Preferences "
    then "General "
    Then " Plus-Ins"
    At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
    Shut down photo shop and try to open a raw.
    Bridge doesnt work for some reason but im going to keep looking.
    Hope this works for you as well.

  • Can't Open PSD files in Photoshop! What's happening?

    Hi guys,
    Can someone pls tell me why when I open a PSD file in Photoshop CS2 or CS3 , the psd file apparently seems to be opened but in reality nothing happens as I only get a blank image in Photoshop? In other words, it's like the file has not been opened at all as I only get the usual very small grey and white boxes in Photoshop although at the same time the psd filename and other data associated with the file can be seen on Photoshop's interface as if the file has been loaded normally when in fact it's far from it?!!!...
    Am I doing something wrong?
    Just to let you know this happens after I tried to open a downloaded file from the Internet but it happens all the time when I try these kind of files in photoshop.
    Pls help
    Thanks in advance for your help..
    Corolla...

    Hello guys,
    Thanks for your replies first of all.
    To answer your questions John, please refer to the Print Screen in this link: http://i32.tinypic.com/2vhzvvm.jpg
    I highlighted in yellow the most important things related to this topic in the pic, also referred to in my previous email.
    I got the psd file from a public filehosting site and many users thanked the uploader for his great upload; thus I must have something wrong or I'm doing it wrong as the others seem not to have this prob!!!
    As regards Ed's question, no indeed, I don't have any problems if I create a psd file myself closes it and opens it whenever I want.
    And the filesizes are not at all small as the ones I'm talking about and which I'm having the problems with are sized from 20MB to 32MB.
    Reference to your last question Ed, no I haven't tried to trash/reset preferences as per the FAQ as I have only been using Photoshop very recently.
    Thanks in advance.
    Corolla
    Seems like strange I don't know.

  • Can't Open any files in photoshop CS3

    I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

    reset the preferences per the faq?
    http://www.adobeforums.com/webx/.ef4a07f/1

  • When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud.  I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file).  I don't want to log in

    When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud.  I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file).  I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go  back to Bridge, and tell it to open the file in Adobe RAW.  However, this does not work for older psd files which for some reason cannot be opened in RAW.  How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • "Load files into Photoshop layers" fails to complete CS6

    Hi all,
    Hoping someone can help with the folling problem with Photoshop & Bridge CS6
    When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
    At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
    When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
    I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
    Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
    Over the last week it has become more frequent, to a point where this workflow is unusable.
    A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
    A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
    I have tried the following:
    In Photoshop preferences:
    disabling the "Use graphics Processor"
    Increasing or decreasing the amount of RAM available to Photoshop
    Changing the cache levels or changing the cache tile size
    changing the scratch disk
    Trashing the Photoshop preferences file (Photoshop Settings.psp)
    In Bridge
    Purging the cache
    Increasing or decreasing the cache size
    Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
    In general system
    Quitting extra programs (Safari, Thunderbird, iTunes)
    Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
    Rebooting the computer - again will work for a few images sets before again failing.
    Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
    The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
    Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
    System is as follows:
    Mac Pro 2 x 2.66 Quad Core
    24GB RAM
    ATI Radeon HD 4870 512
    OSX Lion 10.7.4
    I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
    Hoping someone has an answer.
    Thanks.

    Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
    Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
    I'll keep testing and post back.
    I am looking to upgrade my video card to see if it's a video memory thing.
    What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
    Thanks again for your suggestion.

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • Can't export an EPS file from Photoshop CS5 and open in Illustrator CS5.

    I'm on Mac OS X Lion 10.7.5
    I am making DVD covers for print. The barcodes for the DVD covers have to be done in Illustrator. But the original designs are done in photoshop including the text. For years this hasn't been a problem. Right before adding the barcodes I create an EPS file from photoshop, open that file in Illustrator and all my text is automatically coverted to perfect crisp clean vectors, viola! I add the barcodes and export the PDF for the printers.
    But now I can't open my EPS files in Illustrator CS5 even though I'm exporting them the same way I always have from Photoshop CS5. Illustrator says... "The operation cannot complete because of an unknown error." --> Note it does not give an error number after this warning like I see it does for so many other people.
    I have been trying to fix this for over 10 HOURS spanning 2 days! I'm infuriated I can't get help from Adobe on this and have read all the forums and don't see my problem listed anywhere.
    I've tried:
    - Deleting the .plist file and the Settings folder & resetting my permissions
    - Uninstalling and Reinstalling Illustrator
    - Turning off all other applications
    - Creating more disk space on my hard drive (even though I have 200gb available)
    - Restarting the computer
    - Disabling my Font book and still I can't open the EPS file
    I thought maybe it's possible it's the font I'm using Fontesque OT so I even tried converting text to objects prior to exporting the EPS file from photoshop to illustrator and turning off my font book, but still it won't open. And if I open the PSD directly in Illustrator, text comes out a bit fuzzy in the PDF I export.
    If anyone can provide any solutions I would be so grateful! I'm at my wits end here, this should have taken under an hour to do and now it's ruining my entire weekend. I'm completely panicked because I was suppose to have these to my client over the weekend so they could turn them in for Print frist thing on Monday morning and of course Adobe provides no chat support or phone support after 7pm on weekday or on the weekend which is when this all started.

    I never even thought of reinstalling photoshop, but I think this was a font issue. I'd never saved an EPS with Fontesque OT Regular enabled, only Fontesque OT Bold. Somehow I think the font was causing the problem because ridding the font from the equation allowed me to open the EPS file.
    After 12 HOURS of trying different things I found a WORK AROUND...
    I had to:
    - Select the Text in Photoshop (with Fontesque OT enabled)  --> Select Create Work Path --> Covert to Shape on each of the text items
    - Save EPS file out of Photoshop
    - Disable Fontesque OT font in Font Book
    - Then open EPS in Illustrator add in my Barcodes and export the PDF
    (the barcodes have to be added in Illustrator because they need to be pure 100% black with no CMYK color in them. You can't save them out of Photoshop that way, only Illustrator, otherwise I would have made my pdf straight out of photoshop like any other normal human
    This work around is the only way I could get the EPS files to open in Illustrator and still have the text remain super crisp like a vector.
    NOTE to others in the future about crisp text from Photoshop to Illustrator:
    - Simply "converting to shape" did not preserve the vector. You have to Select Create Work Path --> then Covert to Shape on each of the text items (with the font enabled) for this to work and preserve the crispness of the text. Even creating "smart object" did not truly preserve my vectors or the text crispness in the EPS file once I imported it into Illustrator.
    DrStrik9 thank you SO MUCH for trying to help me. You did give me ideas that helped me figure out the workaround and also helped me feel not so alone as I struggled through this. I'm going to follow up with your other suggestions about reinstalling photoshop and also checking my RAM, etc. But I just want to that you so so so SOOOO much for all your time and consideration in this matter. I hope you have a wonderful amazing week ahead and that someone does something very nice and thoughtful for you too

  • How to open animated .GIF files in Photoshop CS3 and newer

    Q: Since ImageReady is long gone from Photoshop, how can I open animated GIF files in Photoshop CS3 and newer?
    A: File -> import-> video to layers.
    In the dialogue box type "*.*" to show all file types.
    Select your GIF file and which frames to import.
    They will now be available in your animation palette.

    Zeno
    curt y, sorry for the late reply, I tried that but I doesn't work. I have to choose at least two files in the Load Layers window in order for the OK button to be available and then some action script uses the different files to make layers and merges them but not from the frames of the gif file. I can undo through the script to see what it did but it never accessed the frames of the gif file, just the first frame. Choosing "make frames from layers" in the animation palette only puts the original files into layers - that is only the first frame of the gif file.
    I guess I'm out of luck with the 64  bit version of Photoshop as Zeno suggested :-(
    What program would you people suggest for opening each frame from gif files?

  • File not found error when opening .JPG files in Photoshop CC

    uninstalled and reinstalled photoshop CC and cannot resolve this issue.
    any time i open a .jpg file in photoshop, I get a "Could not complete your request because the file was not found."
    the file is obviously there, so i'm assuming its missing some sort of plugin, which i thought would be resolved when reinstalling photoshop.
    very frustrated and not sure how to fix this.
    running OSX mavericks
    please help

    used bridge, didn't work.
    tried right-click, double click..open in program.
    same error.
    files work in other adobe products.....
    only way to get a jpg in there is to "paste" it in.

Maybe you are looking for

  • Inserting/updating data in control block based on view

    Hi! I`ve created a block based on a view to display data. I want this block to be insertable and updateable, that is I will use a on-insert/update trigger to call an insert/update procedure located in the database. When trying to change/insert a valu

  • Oracle 10G or Oracle 11G Certification

    Hi all, I wanted to do a certification on Oracle database. I am aware of the database concepts. But i am very new to the certification programme of Oracle, hence i dono how to proceed with..?? I referred some of the links in oracle site but i got con

  • I used time machine, now my drive has failed and all my files are lost.

    i used time machine, now my drive has failed and all my files are lost. any one know how to get the max osx to see the drive again so i can retrive my files

  • Java 2D and hardware accelleration

    Is there a way to use Java 2D and take advantage of a graphics card accelleration (ie. Creator 3D) or do I have to convert my application to Java 3D? If so, how compatible are the APIs? Thanks

  • DICOM packaged application install error - XDB schema error

    Hi, I have worked through the install readme for the DICOM packaged application and on installing the DICOM_demo_installer.sql supporting objects I get an error when trying to create the table dicom_archive ORA-31000: Resource 'http://xmlns.oracle.co