Files modified by 10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium

Hello, anyone knows what are the files modified by 10.2.0.4.0 Patch Set 3? or where can I found this information?
Thanks in advanced.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Similar Messages

10g Release 2 (10.1.2.0.0) for Solaris PDF's not found 404

All the PDF links on otn for 10g Release 2 (10.1.2.0.0) for Solaris Operating System (SPARC) are dead http 404.

Issue resolved; thanks.
Cheers, OTN

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Download Oracle Database 10g Release (10.2) and required patches

Hi
I need to upgrade Database from 9.2.0.7 to 10.2.
So I need to get the Oracle Database 10g Release (10.2) Software and latest patches sets and required patches.
SAP 4.7
Kernel Release: 640 with Patch 221
Windows2000 Patch 4
I am not able to find out where to download Oracle Software and Required Patches from [url] service.sap.com
Please let me know.
Regards

http://service.sap.com/installations
Pick there whatever application (e. g. ERP and select your CDs). You can also directly search for the CDs:
51031678 DVD ORACLE RDBMS 10.2 Windows
The actual patches you get
http://service.sap.com/swcenter-3pmain
--> Oracle
--> Oracle 10.2.0.4
--> Database RDBMS
--> MS Windows (32-bit)
Download there the patchset 10.2.0.4 itself and the latest interim patch 10204_Patch8_WIN32.zip .
Markus

Oracle 10g 2 - 10.2.0.2 Patch seti without instance

Hi,
I'm installing Oracle 10g 2 - 10.2.0.2.
I installed base release 10g 2 and then i have installed the patch set 10.2.0.2 (Linux x86).
It's a new installation, so there isn't an instance.
When i use dbca to create the DB i receive the error
ORA-01092: ORACLE instance terminated. Disconnection forced.
So i think i should execute catupgrd.sql like described in readme of patch, but if there ins't an instance, how could i connect to the db as sysdba?
Thanks!

If you don't currently have any database, then you don't need to run the catupgrade script, this is meant only for databases so the data dictionary is upgraded on an individual basis. Just ensure you have properly applied the patchset against the right Oracle Home and ensure your environment variables are properly set.
~ Madrid

Various problems installing 10g Release 1 (10.1.0.2.0) for Windows

I have been trying in vain for quite a while now to install the above mentioned release. I opted to copy all the required installation files from the CD to a location on my HDD. My issues are as follows:
According to the documentation I started the 'Autorun' but did not get the option 'Install/Deinstall Products.' I had just one option which was to simply 'Start the Installation' which I selected. Following this, nothing happened. There was absolutely no activity thereafter.
Next I launched 'setup.exe' from the 'Install' directory which seemed to start things off. After selecting options like installation location and type of installation I get an error message to say that 'Exception generated when IP address of host cannot be determined.' I have no choice but to Ignore and continue since 'Retrying' doesn't solve the issue and annulling the operation stops the installation completely as it should.
This message appears again after selecting the kind of database I choose to install in the next step and again just before the actual installation begins, after all the options are selected.
The next error message I get is 'Error when starting service OracleCSService.' Again I have no choice but to Ignore and continue.
Finally at the end of this exercise I cannot use this installation. My final target is to use the default database created through Informatica, an ETL which never can manage to log into this database.
Are the error messages cited above common? What can be the possible solutions?
Regards

The 'autorun' not starting the setup.exe is a pretty well known problem. Your workaround to using the install\setup.exe is correct.
The "Exception generated when IP address of host cannot be determined" comes from not having a properly configured network subsystem. Perhaps you are using DHCP to get the IP address. However, Oracle is desiged to work in a server environment and the key difference between a server and a workstation/desktop/laptop/client is that a server has a well known static location (hostname and IP address) where all the clients can find it.
To get around this second problem may be as simple as setting up the Microsoft Loopback adapter. You should find more than a few references to that using a forum (or Google) search.
Your troubleshooting approach of 'ignore until everything fails' is perhaps not the ideal approach in Oracle. It takes a lot longer, but I'd recommend you stop to investigate each of the problems. Many are resolved through the documentation, however many are also well documented in these forums and on various web sites. Google is indeed your friend.

Unable to download Oracle 10g Release 2 (10.2.0.1.0) for Microsoft Windows

Hello folks. When I tried twice today to download Oracle 10g from the URL shown at the bottom of this message, I got an error message: The page cannot be displayed.
I STARTED the download process from the page, http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Thank you.
COULD NOT DOWNLOAD FROM: http://download.oracle.com/otn/nt/oracle10g/10201/10201_database_win32.zip

There were some problems downloading software that have since been fixed, retry your download.
download.oracle.com broken

Oracle Database 10g Release 2 (10.2.0.1.0) for Windows

Does this version require additional patches for stability?
Is it suitable for Win64 systems or must I install Oracle for Win64 ?

10gR2 32bit runs on 64bit platform. 'Require' may be too hard, but at least major patchsets should be applied, the latest is 10.2.0.3 .
Werner

OracleAS 10g patchset 5. runInstaller fail apply patch 8626084

Upgrade EBS R12.0.4 to R12.1.1 (Doc.id 752619.1) -> upgrade OracleAS 10g Release 3 (10.1.3) Patch Set 5 (10.1.3.5.0) apply patch 8626084.
My OAS release 10.1.3.0.0 and fail in 25% of Install copying 'chgiphost.sh' in install actions log send the following messages:
Starting install Install Phase 1 of component Oracle Distributed Software Assistant Server Patch
Calling Action fileActions10.1.0.3.0 copyGroupFromJar
     selectedNodes = null
     copyGroup = dgaexe
     permissions = null
     owner = null
     group = null
     copyAsText = null
     JarLoc = /u732/tmpdir/OraInstall2013-03-05_06-33-45AM/temp20
     gpEntries = [[dsaServer.sh ->%PROD_HOME%/bin/dsaServer.sh 1964 plats=1=>[453] langs=1=>[en,ja]]
, [dsaShutdown.sh ->%PROD_HOME%/bin/dsaShutdown.sh 1611 plats=1=>[453] langs=1=>[en,ja]]
, [shutdown.txt ->%PROD_HOME%/shutdown.txt 14 plats=1=>[453] langs=1=>[en,ja]]
, [dsaOpmn.xml ->%PROD_HOME%/dsaOpmn.xml 780 plats=1=>[453] langs=1=>[en,ja]]
, [getias.sh ->%PROD_HOME%/bin/getias.sh 1317 plats=1=>[453] langs=1=>[en,ja]]
, [addopmn.sh ->%PROD_HOME%/bin/addopmn.sh 864 plats=1=>[453] langs=1=>[en,ja]]
, [delopmn.sh ->%PROD_HOME%/bin/delopmn.sh 843 plats=1=>[453] langs=1=>[en,ja]]
, [asgexec ->%PROD_HOME%/bin/asgexec 8560 plats=1=>[453] langs=1=>[en,ja]]
     DllGroup = false
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :1
COPYRETRY new Jar File copied to temp:/u732/tmpdir/OraInstall2013-03-05_06-33-45AM/temp21
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :2
COPYRETRY new Jar File copied to temp:/u732/tmpdir/OraInstall2013-03-05_06-33-45AM/temp22
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :3
How many notes indicate that the inventory is corrupted, but my file ContentsXML / inventory.xml contains good, the information for my 3 enviroment rdbms and 10.1.2/10.1.3.
I check my opatch inventory-detail for rdbms, 10.1.2/10.1.3 and everything seems fine.
I appreciate any help you can give.
regards
Luis

Thanks all for your Help.
I clould advance recreating my inventory wiith the note 742477.1.
but now, I have a new error. In 86% of the intallation. I receive the following:
Starting install Install Phase 1 of component Patch of LDAP Required Support Files
Calling Action fileActions10.1.0.3.0 copyGroupFromJar
selectedNodes = null
copyGroup = lib
permissions = 755
owner = null
group = null
copyAsText = null
JarLoc = /u732/tmpdir/OraInstall2013-03-18_07-47-43PM/temp19
gpEntries = [[libnldap10.a ->%PROD_HOME%/lib/libnldap10.a 139728 plats=1=>[453] langs=1=>[en]]
, [libldapclnt10.a ->%PROD_HOME%/lib/libldapclnt10.a 1618728 plats=1=>[453] langs=1=>[en]]
, [libldapclnt10.a0 ->%PROD_HOME%/lib32/libldapclnt10.a 1170280 plats=1=>[453] langs=1=>[en]]
, [libnldapj10.so ->%PROD_HOME%/network/lib/libnldapj10.so 32552 plats=1=>[453] langs=1=>[en]]
DllGroup = false
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :1
COPYRETRY new Jar File copied to temp:/u732/tmpdir/OraInstall2013-03-18_07-47-43PM/temp20
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :2
COPYRETRY new Jar File copied to temp:/u732/tmpdir/OraInstall2013-03-18_07-47-43PM/temp21
COPYRETRY : Retrying copy, due to exception :A runtime exception occurred during the execution of this action.
COPRETRY Attempt :3
COPYRETRY new Jar File copied to temp:/u732/tmpdir/OraInstall2013-03-18_07-47-43PM/temp22
Exception thrown from action: copyGroupFromJar
Exception Name: UNCAUGHT_RUNTIME
Grateful for your help.
Luis

Oracle 10g release 2 and Oracle Unbreakable Linux 5

Hello, I tried to install Oracle (Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64) into the last oracle linux distribution. I have problems with the installation process:
@SRVAXILAB072 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-08-16_09-05-34PM. Please wait ...[oracle@SRVAXILAB072 database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-08-16_09-05-34PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I see in this forum some solutions but none works for me (I´m installing Oracle Unbreakable Linux 5 x64) to solve this problem I put libXp lib but the problem is the same.
The library is installed:
[root@SRVAXILAB072 oracle]# ll /usr/lib64/libXp.so.6
lrwxrwxrwx 1 root root 14 Aug 16 18:10 /usr/lib64/libXp.so.6 -> libXp.so.6.2.0
[root@SRVAXILAB072 oracle]#
But I think the installation process are searching in /usr/lib but I didn´t have the library in 32b I tried to copy to /usr/lib and another crazy ideas but didn’t work.
I read alot of post and guides for installation process but I didn´t see nothing to install Oracle in Oracle Unbreakable Linux 5
Some ideas??
If not..... I will try with Oracle Unbreakable linux 4 :(
Thanks
Best Regards

Well, I've not been in touch with installs on linux myself for a long time, but it seems you need a few 32-bit libs. Try installing libXp-1.0.0-8.i386.rpm.

Important--Bug(ORA-22813) fixes in Oracle Database 10g Release 10.2.0.4

Hi,
I found that in SELECT STATEMENTs where we use "xmlagg() functions with a GROUP BY/ORDER BY,it fails with ORA-22813 if the result is too large.
This happens as there is a hard coded limit on the result size. (max 30k)
Next,i confirmed that and when i removed a portion of the XML agg() values and executed it---Wonders,it runs perfectly fine.
This means that ""xmlagg() functions with a GROUP BY/ORDER BY,fails with ORA-22813 since the result is too large.
I have come to know that patch "Release 10.2.0.4" has the fix for Bug-22813 for "xmlagg() functions with a GROUP BY/ORDER BY".
Could you all please confirm that "Oracle Database 10g Release 10.2.0.4" (patch 10.2.04) fixes the issue?
Based on your confirmation,i can go ahead to get the patch installed.
Current Version:-Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
Thanks
Mainak

Your query should be written something like this..
select d.*
from fbnk_customer,
       XMLTABLE
          '//c3'
          passing XMLRECORD
          columns
          C3_VALUE varchar2(60) path 'text()'
       ) d
where recid='1001400'; Although it would be better to use an extact path expression rather than '//c3'

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

10.1.0.5 Patch for Oracle Application Server 10g Release 1

Hi Guys,
Does anyone know what is the patch number for 10.1.0.5 Patch for Oracle Application Server 10g Release 1?
This is a Oracle Application Server and not Oracle Database server.
I tried searching on Metalink but not able to find it.
Thanks in advance!
Avinash.

10.1.0.5 is not a version number for an OAS. It is only a version number for RDBMS.
If you are running OAS 10.1.2.x with the Identity Managmenet/SSO (OID Server), & elected to have it install the Metadata Repository database for you, this was a RDBMS release below 10.1.0.5. The OAS patch to 10.1.2.2 or 10.1.2.3 required the RDMBS be updated to 10.1.0.5 first. This is the standard 10.1.0.5 update for your platform.
use Advanced Search on Metalink
To find the OAS 10.1.2.2 or 10.1.2.3 patch set, search for Oracle Fusion Middleware Server. Release 10.1.2.2 and 10.1.2.3. Look for the decriptions like "PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE" OR "PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2"
To find the RDBMS 10.1.0.5 patch, search for RDBMS Server, Release 10.1.0.5. Look for the Description containing something like "10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER"
The patch number is different per platform, so I can't tell you the exact #s without more info (OS)

Where I can get OC4J as a component of Oracle AS 10g release 3 ?

Hi all !
I installed Oracle Application Server 10g release 2 (10.1.2) and updated Oracle AS Portal to 10.1.4. I want download the Oracle Container for J2EE (OC4J) 10g release 3 (10.1.3.4) as a component of Oracle Application Server (not a Standalone OC4J). Where I can find it ? At the http://edelivery.oracle.com/ I found some of items such as :
+ Oracle Application Server 10g (10.1.3) for Microsoft Windows (32-bit) (DVD) (Part 1 of 6) --> six parts.
+ Oracle Application Server 10g Release 3 (10.1.3.4.0) Companion CD 1 of 3 for Microsoft Windows x86 (32-bit) --> three parts.
But I don't know which of type ?
Pls show me link where I can get it ?

If you are looking for components like OC4J and OHS, download following from eDelivery:
- Oracle SOA Suite 10g (10.1.3.1.0) for Microsoft Windows (32-bit) (CD), Part Number B34431-01
Use the Advance install option and choose the components that you want to install.
For patch, download these two CDs from eDelivery:
- Oracle Application Server 10g (10.1.3.4.0) Patch Set CD 1 of 2 for Microsoft Windows (32-bit), Part Number B51068-01
- Oracle Application Server 10g (10.1.3.4.0) Patch Set CD 2 of 2 for Microsoft Windows (32-bit), Part Number B51069-01
or this from MetaLink:
http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=7272722
Thanks
Shail

Link to download previous release - Oracle WCI 10g Release 3

Hi,
Does anybody know the link to download a previous version of webcenter Interaction. On the Oracle website, I can only find a link to download 10g release 4 and cannot see a page for previous releases.
The previous version I am looking for is, WebCenter Interaction 10.3.0.0.0

Go to http://edelivery.oracle.com and enter the site.
Complete the Export Restriction validation page
Select Oracle BEA and your OS on the following page.
Scroll down the product list for WebLogic Portal 10.0 and click the download button.

Files modified by 10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium

Similar Messages

Maybe you are looking for