Files not accessible

when I go to my pictures through file explorer I get a mwssage that state files not aacessible access denied >file exp./ documents/my pictures.
However I can get to them on one drive as well as the picture app on the app screen. These pictures came from a flash drive. Do I need to reload them or can I pull them from one drive? I would like to access them from file explorer. They are obviously in the computer.
This question was solved.
View Solution.

thank you

Similar Messages

  • Oracle data file not accessible

    Dear All,
    I hitting the following error while trying using dbv command:
    kuldb84s:oraq00 50> dbv FILE=p00.data483
    DBVERIFY: Release 10.2.0.4.0 - Production on Mon Nov 22 14:53:12 2010
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    DBV-00100: Specified FILE (p00.data483) not accessible
    kuldb84s:oraq00 51>
    I hitting the same thing with BRTOOLS as well.
    Do you know what is the error message above meant ?
    Best Regards,
    Ken

    Dear Gagan,
            I would not go for restarting the DB before finding out the root cause. I meant, the reason for restarting DB ?
    Dear Tom,
            I have tried with the full path, but the result is the same.
            Regarding to the dbv help,
            1. The data file is exists.
            2. The data file is not end with .dbf
                 I tried the same command in other system, the particular data file able to be verified.
            3. How do we justify whether the data files are being locked or not ?
    Bes Regards,
    Ken

  • Files not accessible from local view

    Hello,
    I recently got a new computer (iMac 11,3) and transferred all files from a backup drive. Since then, the local view in Dreamweaver's file panel does not display the files in my local root folder. The files are visible and accessible from the desktop. I can open them in Dreamweaver by dragging them onto the Dreamweaver icon, but I can't put them to the remote server (get and put commands are grayed out). I've edited the site settings, and defined a new site with a new local root folder, but still have the same problem. I'm using DW cs3. The old computer was an iMac G5, with a non-Intel processor. I hope that's not the problem.
    Thanks!

    Local:
    Site name: Neal homepage
    local root folder: Sesostris:Users:nskorpen:Documents:Neal homepage:
    Default image folder: (blank)
    Links relative to : Document
    HTTP address: http://www.nealskorpen.com/
    case sensitive links: off
    cache: disabled
    Remote:
    Access: FTP
    FTP host: www.nealskorpen.com
    Host directory: /public_html/
    login and password: I'm not going to list these here. I tested the
    connection and they worked.
    Use passive FTP: disabled
    Use IPv6 transfer mode: disabled
    use firewall: disabled
    use SFTP: disabled
    Maintain synchronization information: enabled
    Automatically upload files to server on save: disabled
    check in/out: disabled

  • Source file not accessible after Move project

    After moving a project, one of the source code files cannot be opened. The message:
    Resource '/Culinaria/src/SearchMenu.mxml' does not exist.
    But it does exist - it's residing in the src directory as it always has and is visible in the package explorer. Double clicking to open it provokes the error. The other files in the project can be opened normally.
    As said, this problem has surfaced after a Move of the project.
    The problem goes away and then comes back after shutting down Flash Developer and starting it up again.
    Also, I cannot view one of the source modules in Design mode - I just get an empty gray screen. Again not the case for every file but just one and it persists after shutting down and restarting Flash Developer. It happens to be the main application file  and it shows up on the tab as a simple text file when opened in source mode. Here is the first line:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                    xmlns:ns1="*"
                    width="1500" height="1134.0151"
                    backgroundImage="../image/SilvesterTischDeko.jpg" backgroundAlpha="0.85"  creationComplete="initCollections();"
                    layout="absolute">

    Hi Amy,
    yes I did Clean the project and a new .swf file is generated (dtLastMod at time of Clean). I can open the module (it's the main application) in source mode but the IDE does not offer the Source/Design buttons and the file icon on the tab is that of a simple text file.
    Somehow the Flash Dev. doesn't realize that it is mxml file representing the application even though the header line (see above) is unmistakable.

  • Properties file not accessible for older requests

    Hi
    With use of jar file as external resource, we are making use of some properties from properties file.
    Whenever we update the properties file with new properties, after deploying the project - it is observed that for old requests the newly added property is not available.
    And in the code, we are accessing the new property which is producing exception when an older request refer to this piece of code.
    does it make sense or there might be some other problem that is causing the exception??
    (missingresourceexception is the exception thrown - it is referring to the new property entry in the logs as it cannot find a property for that)

    Hi Anuj,
    We are putting it in jar file itself. This jar file is added in external resources.
    The current situation is - the change is getting reflected for new (request) instances getting created. For already existing instances, it is not.
    by the way, on enterprise server, where can we locate the contents of jar - so that we may modify at run-time... or no such provision is there.
    Thanks for your quick response.
    Regds,
    Sharma

  • Why are all transferred files not accessible?

    I am linked to my iMac yet whenever I transfer files over I cannot open or change them without having to put in my administrator code. Why is that? I have put in my administrator name on this computer with the ability to read and write. I don't see why that is not recognized. Anyone else having this issue?
    Thanks,
    Richard

    Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

  • Archive File not accessible.

    Hello Experts
    I've an issue regarding archive file. I schedule a write program using TCode SARA, it works fine and gives me a session id for newly created archive file. When I try to schedule the delete program for given session id in SARA, I'm not able to select the file. It says 'Failed'.
    Strange part is when I directly run the archive program through SE38, I can see option (checkbox) to select file in SARA while scheduling delete program.
    I guess, I'm missing something when schedule write program for archive object. I dont know what .
    Any idea, if I'm doing it right or something odd, please share.
    Your any response will be highly appreciated.
    Thanks
    Ajay

    Hi Ajay,
    I prove in my 4.6C system your proble. We always use archive with external repository but i isn´t put now.
    AOBJ Customazing:
    Log.File.Name -> ARCHIVE_DATA_FILE
    You must to create TestSessVariant and Prod. session var (Delete Program Variant)
    Deletion Jobs -> Start automatic. (Not important)
    Try to run the two jobs with this configuration. If you can, then you create a client folder on Sap Directories (AL11)
    Best regards.

  • Files not accessible on the cloud

    Hi everybody,
    I am an Adobe Story Plus subscriber and I have a really annoying issue.
    So I use the same log-in credentials on both computers (an iMac and a MacBook Pro), I use Adobe Story Plus Desktop and always work online.
    The problem is that the files available on my computers are not the same. It seems like my laptop won't synch with my account.
    Does anyone know how I can fix this and make sure my files are synched on every computer I'm using?
    Thank you !
    Julien

    Hi Rashi,
    Yes I work online on both computers. There's a green dot on each session but still the synchronization doesn't look the same from a computer to another.
    Can we schedule a connect for today around 2pm EST ?
    Thanks,
    Julien

  • Help Files Not Accessible

    At a client we found that after applying a security patch to client XP and 2000 workstations, help files became unaccessible.
    This is a known problem, and information and solution can be found in the Microsft Knowledge Base article 896054. It affects access to all *.chm
    The solution requires an addition of a registry entry.

    I had the same problem even though I use local installation.  From the Microsoft article, I used the option to open up all CHMs on my local intranet.
    Thank you, Stephen, for providing this information.  I had looked for it at Microsoft, but I had used the wrong keywords.
    Message was edited by: Bruce Harold

  • An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

    I'm trying to load sharepoint script from *.cmd file. 
    I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
    My cmd file is: 
    Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    My sharepoint file 1.ps1 is:
    $snapin="Microsoft.SharePoint.PowerShell"
    if ($action -eq $null -or $action -eq '')
    {<br />
    # Action by default is complete uninstallation.
    $action='uninstall'
    $uninstall = $true
    else
    $action = $action.ToLower()
    switch($action)
    { $_ -eq "uninstall" } { $uninstall = $true; break }
    { $_ -eq "removesolution" } { $removeSolution = $true; break }
    { $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
    { $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
    default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
    Check the Sharepoint snapin availability.
    if (Get-PSSnapin $snapin -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is loaded."
    elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
    Write-Host "PS snapin $snapin is registered."
    Add-PSSnapin $snapin
    Write-Host "PS snapin $snapin is loaded."
    else
    Write-Host -f Red "Error: PS snapin $snapin is not found."
    Exit -1
    $url = "http://pc1/sites/GroupWork/"
    $site= new-Object Microsoft.SharePoint.SPSite($url )
    $loc= [System.Int32]::Parse(1033)
    $templates= $site.GetWebTemplates($loc)
    foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
    $site.Dispose()
    The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
    PS C:\2> .\1.ps1 
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    GLOBAL#0 Global template
    STS#0 Team Site
    STS#1 Blank Site
    STS#2 Document Workspace
    MPS#0 Basic Meeting Workspace
    MPS#1 Blank Meeting Workspace
    MPS#2 Decision Meeting Workspace
    MPS#3 Social Meeting Workspace
    MPS#4 Multipage Meeting Workspace
    CENTRALADMIN#0 Central Admin Site
    WIKI#0 Wiki Site
    BLOG#0 Blog
    SGS#0 Group Work Site
    TENANTADMIN#0 Tenant Admin Site
    {248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
    {95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
    {7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
    PS C:\2>
    I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
    i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
    the cmd file but without success.
    My PowerShell has version 2.0: 
    PS C:\2> $psversiontable
    Name Value
    CLRVersion 2.0.50727.5477
    BuildVersion 6.1.7601.17514
    PSVersion 2.0
    WSManStackVersion 2.0
    PSCompatibleVersions {1.0, 2.0}
    SerializationVersion 1.1.0.1
    PSRemotingProtocolVersion 2.1
    After launching the script from 1.cmd file i get an errors:
    C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
    PS snapin Microsoft.SharePoint.PowerShell is registered.
    The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
    tered.
    Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
    ration.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
    No xml configuration files loaded.
    Unable to register core product cmdlets.
    Could not read the Types files in the folder CONFIG\PowerShell\types.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
    "No Types files Found."
    Could not read the Format file in the folder CONFIG\PowerShell\format.
    Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
    No Format files Found.
    PS snapin Microsoft.SharePoint.PowerShell is loaded.
    New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
    on at http://Pc1/sites/GroupWork/ could not be found. Verify t
    hat you have typed the URL correctly. If the URL should be serving existing con
    tent, the system administrator may need to add a new request URL mapping to the
    intended application."
    At C:\2\1.ps1:48 char:18
    + $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
    + CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
    tionException
    + FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
    Shell.Commands.NewObjectCommand
    Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

    I have an answer for my problem:  for solving a problem I've made several steps:
    1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
    This user has been added as farm administrator in the wizard.
    This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
    2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
    the Management Shell of Sharepoint.
    3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
    (my main account) in the Config database
    4. Run CMD file only from Start->Run menu. 
    runas /user:Domain1\UserAccount1 "C:\1.cmd".
    Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
    Thanks all for help.

  • Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive.  I get the error message E:/not accessible or something similar.  Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

    Trying to save files on "PC" side of Mac, using a FreeAgent external harddrive.  I get the error message E:/not accessible  access denied.  Can I not use an external harddrive, if not, what is the best way to back up PC side of a Mac

    Apple has really crappy NTFS read-only that does not always work. And it is probably a licensing issue.
    Paragon Software is constantly being updated and supported with their NTFS for Mac OS X - they also have an HFS+ driver for Windows that works - Apple's HFS+ read-only driver for Boot Camp / Windows does not.
    I keep seeing problems and lack of support for MacFUSE, that could change.
    http://www.bing.com/search?q=ntfs+for+mac

  • Music I purchased on I Tunes is not available when I open ITunes in I Movie.  I Movie says those files are "protected" and not accessible.  What does that mean and can I change them to "unprotected" so I can use them in IMovie?

    Most of the music that I purchased on I Tunes I bought and downloaded on my old I Mac which I replaced with this I Mac about 9 months ago.  When I"m using I Movie on this I Mac and try to open I Tunes tab in I Movie, most of the files are not accessible because I Movie says those fields are protected. What does that mean and can I change those files to unprotected so they show up in my music in IMovie?
    This I Mac is OS X version 10.9.5 Maverick, 2.7GHz Intel Core 15 processor, 8GB 1600MHz DDR3 memory.

    Your older iTunes music purchases included DRM software to prevent sharing.
    iTunes Store: iTunes Plus Frequently Asked Questions (FAQ) - Apple Support
    For some money you can get it removed and get a better quality file to boot.

  • File Connection Error (IOException: Root is not accessible)

    Hi
    I have to read the text file from resourse folder.
    I have writen the following
    InputConnection fc = (FileConnection)Connector.open("file:///C:/WTK22/apps/OpenFile/res/hello.txt");
    but it give me some runtime error like IOException: Root is not accessible
    Thanks

    Hey bluebird before posting this question u should fly over the forum nway i five u solution. Try following
    FileConnection fc = (FileConnection)Connector.open("file:///SDCard/hello.txt");
    and go to http://developers.sun.com/techtopics/mobility/index.jsp
    //PremInd

  • Rokr: "Some files and applications are not accessible"

    Help please? When using USB to connect to my ibook the phone gives me this message: "Coneced as Storage Device: Some file and applications are not accessible". I then go to my desktop and search through my phone to find no files not to mention not showing up in iTunes. Could someone please help?

    I am having a similar problem.
    My RoKr was connecting and syncing properly until I performed the latest software upgrade (which upgraded both iTunes and iSync). After the upgrade my phone does not show up either in iTunes or on the desktop. When I plug the phone it indicates that it is connecting as a storage device and some file/applications will not be accessible. However the phone does not appear on the desktop or in iTunes. When I go into iSync the phone is only recognized via bluetooth, the USB connection is not detected.
    I remain tuneless and await a solution...
    PowerBook G4   Mac OS X (10.4.2)  

  • Updated to itunes 10.5 and Help files are not accessible

    I have updated my itunes to 10.5 today but now the Help files are not accessible.  I receive the following message - the request URL/itunes/win/10.5was not found on this server - Apache/2.2.3 (Oracle) Server at help.apple.com Port 80.

    I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

Maybe you are looking for