Files not appearing in browsing dialog

I am using a PVII extension (Image Gallery) that brings up a dialog for selecting files. This worked fine with DW CS4 on XP. However, now that I'm on Windows 7 all I get for any selected directory is "No files found".
The PVII support folks directed me to an Adobe extension called "Dreamweaver browseForFolderURL" which seems to be intended for this situation. However, after installing and enabling it, still no luck.
Any suggestions for where to go from here? I really wanted to use that extension to put up a page of photos. I'd also hate to have to spend the $$$ to update to a later DW version just for this.

See if this helps -
http://forums.adobe.com/thread/158251?decorator=print&displayFullThread=true

Similar Messages

Flash .swf file not appearing in browser when publishing from iWeb 3.02

I have been working on a site for the last couple of months that i created in iWeb 2.0 and had successfully had small flash movies that I embedded via html snippets from code provided by numerous sources and youtube videos demonstrating how to get flash movies into one's site.
The url is
www.almafoods.com
Today i upgraded to 3.02 and had to make a change to the home page. The domain opened up fine with all the HTML code and .swf on the page exactly as I had it in version 2.0
When I now publish to a folder, first of all it doesn't copy over the .swf file unless I create a link to the file, but even when I upload all the directories to my ISP's remote server, the movie isn't not showing up in the browser. The html code file and .swf file are in their correct directories on my ISP's remote server
I'm baffled as to what is going on here as its the exact same domain that worked perfectly in 2.0 and this has peed me off no end
Does anyone have any suggestions or encountered the same problem in 3.02?
Any advice would be very much appreciated

Your .swf files are in the same folder as the widget-markup files.
Keep your custom files OUTSIDE the folder with the sitename iWeb creates.
iWeb will overwrite everything when it needs to do that, wiping out your custom files.
Put the files in a separate folder and determine the link to these files.
Read this : Using the iWeb HTML Snippet
Besides that, to display these tiny pictures I wouldn't use Flash.
Read this : Create a Banner Slideshow
And then look at this page : My House

PDF File not opening in browser for sharepoint 2010

Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

FTP publishing on iWeb to replace existing site - files not appearing.

On iWeb, I used FTP publishing to replace my existing site files, then deleted the original files but not only has the new site files not appeared in my public html folder but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
Additionally, a 404 Not Founderror was encountered while trying to use an ErrorDocument to handle the request.

but I get the message:The requested URL /www.geofflevitus.com was not found on this server.
That's an indication that the index.html file that is created alongside the site folder by iWeb is missing.
Try publishing your site to a folder on your hard driive and use a 3rd part ftp client like the free Cyberduck to upload the site folder and the index.html file.
Cyberduck or Transmit will let you view your server folder in a Finder like window where you can see which files are missing.
OT

Server side include does not appear in browser

I've imbedded a server side include within an html file. I
can see it in the Dreamweaver design previewer, but it does not
appear when displaying the html in a browser. I've tried saving the
included file as "html", "htm", "shtml", and "shtm". Nothing seems
to work.
Any guesses?

On apache, you have to use either shtm(l), or PHP. And in the
event that
you use the latter, the include directives must be PHP
includes, not HTML
includes, e.g., this -
<?php require('includes/foo.php') ?>
not this -

Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dave Bar" <[email protected]> wrote in message
news:frbps3$f6o$[email protected]..
> Interesting you mention this, I was just experementing
with this today.
> I traditionally use .asp and IIS when using Include
techniques.
>
> I have a client on an apache server, and they can't run
asp, so I had to
> test using html.
>
> This is what I found.
> Since I'm running IIS, I had to use shtml (their apache
server may run it
> with regular html).
>
> I also had to make sure I was using the IIS Localhost in
my url.
> so this worked:
>
http://localhost/tests_and_examples/TEMP/TestInclude.shtml
>
> While this did not:
>
http://localhost/tests_and_examples/TEMP/TestInclude.html
(notice the
> missing s in shtml)
>
> And this did not:
>
file:///C:/Inetpub/wwwroot/tests_and_examples/TEMP/TestInclude.shtml
> (Notice a regular file:/// instead of using IIS
localhost)
>
> Hope that helps
> -Dave
>
> "rsimmons1957" <[email protected]>
wrote in message
> news:frboib$dn5$[email protected]..
>> I've imbedded a server side include within an html
file. I can see it in
>> the
>> Dreamweaver design previewer, but it does not appear
when displaying the
>> html
>> in a browser. I've tried saving the included file as
"html", "htm",
>> "shtml",
>> and "shtm". Nothing seems to work.
>>
>> Any guesses?
>>
>
>

After installation of FCE Upgrade 3.5, Objects Do Not Appear in Browser

I recently upgraded to FCE 3.5. To save disk space on my primary hard drive I installed the Live Type media files on a secondary Lacie 250 gig hardrive. The files appear on the secondary hardrive but some objects do not appear in the browser when I open Live Type and click on the object tab in the browser. (only four appear in browser). I went to preferences of Live Type and my computer appears to know that the media files are stored on the secondary hard drive - ie it got the secondary drive location correct in LT preferences.
What can I do to make the LT media files appear in the browser so that I can use them?
Thanks,
Zeke

You only need to post a URL to your web site. We can see your code in Browser.
So, your page looks OK to me in Firefox, but when I tried to check it in IE, it choked my browser and closed it.
You have quite a few code validation errors - no document type declaration, etc... Start by fixing these reported errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fntp.neuroscience.wisc.edu%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Backup device file not appearing in iTunes Device Preferences

While performing 1st time backup for my iPad to iTunes MacBook, the process was interrupted halfway through. As such, I deleted the registered backup file from iTunes Devices Preferences/device/device backup and attempted to reinitiate the backup process. I have to restart MacBook because the iTunes File/Devices turns grey and I am not able to click on it. Restarting gets me to inititiate the back up and transfer purchase. The problem now the device name is not appearing at iTunes Devices Preferences/device/device backup. I am not sure if the backup is successful/complete and if so where is the files? How do I make the file appear so I can transfer the data / apps to my new ipad air via iTunes. Pls help...

Device not detected in iTunes for Windows

RSC Files Not Appearing in RH Project Manager

My three-writer group has experienced a number of RoboHelp/RoboSource Control problems in the last week.
First this is our setup:
1. Two writers with 64-bit Windows 7, and one with 32-bit Win 7. We all have the latest patches and updates.
2. Our RSC database is on a remote machine that has 32-bit Win XP.
After a time where our group successfully updated our project, I was given a new laptop with Win 7 (I had previously had a 32-bit Win XP desktop), we have now encountered the following problems:
1. No one can open a RH project from version control. We go through all steps and when we open the XPJ icon it finally crashes after taskbar status messages of something like "Querying version control." It thus crashes at one of the final steps in opening a project from the database.
2. Even on our remote machine, I cannot open a RH project from version control.
3. For some unknown period of time, it appears that the three of us have not had our changes uploading to the database because nobody's desktop RH project looks the same. Out of the three of us, I have many--but not all--of my changes up at RSC. I have no idea where my colleagues' changes went.
4. An unspecified number of files are listed in RSC as well in the File Status pod in RH but they are NOT appearing in the Project Manager pod. If I try to move one image file with the same name into a folder where the original should be, RH displays an error message saying that it already exists there--even though I cannot see it in Project Manager nor interface with it.
I have used RH for 11 years but RSC for just 1-2. I have never seen behavior like this before and it's really brought our entire OLH efforts to a halt. Can anyone tell me what I might do to restore, if not the database, a version of the XPJ that has as many of our changes that DID make it to RSC?
Thank You,
Chris
Varian Medical Systems

I have amended the title of the thread for the simple reason that I don't do source control. I guess you've just added another reason why.
Sorry but I cannot help you on this one.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Edit web part option does not appear in browser on lists

I've inserted some lists on a wiki page. However, when viewing in the browser the checkbox and the dropdown containing the Edit Web Part option do not appear. On the properties tag I thought I enabled all the correct properties such as Allow Edit, Allow
Minimize etc. What am I missing?

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Swf not appearing in browser

Hello,
http://www.garybaverstock-nutrition.com/index_test.html
For some strange reason the swf that i have embeded into my 'banner' div is not appearing in the browser.
For the life of me I cannot figure out why??
Got any ideas??
Much appreciated, Damien

Hi
The answer is very simple, there is no swf embedded in your page.
Your banner div is empty -
<div id="banner">
</div>
Check you have uploaded the correct page, and that the link you provided is the correct one for the problem.
PZ

UME LDAP Data - XML file not appearing

Hi,
I have configured the readonly ADS with DB for the user authentication. Now I want to restore back to the default datasource configuration (dataSourceConfiguration_database_only.xml). But in the dropdown box in the Configtool >> UME LDAP data under the "Directory Security" tab, I am not able see the config XML file for the DB only. I tried uploading the file, but its saying file already exists. After this I tried deleting the fils from the cluster_data\server\persistent\com.sap.security.core.ume.service and then uplaoded the XML file. Still this is not appearing in the List of Datasources available.
Can you please let me know how shall I revert the Datasouce to DB only?
Regards,
Debasis

Hi,
Go to ConfigTool -> Global Server Configuration -> Services -> com.sap.security.core.ume.service.
You can change the value of ume.persistence.data_source_configuration to dataSourceConfiguration_database_only.xml.
Regards,
Siva
P.S: Award points if you find this useful.

File not appeared in Application server

hello gurus
iam new to SAP
Iam doing excersice MD (Attributes ,text,hierarchies) loading through PROCESS CHAIN, while iam loading data by infopackage under schedule tab i had given file name which is saved in Application server,but in preview it shows File not found (for text) and hierarchy also same problem,so pls clear my thread any one....!

Hi,
Check the proper authorizations are there or not?. in SU53. Check you are opening structure file or Data File?. Ask Basis team to check the file from backend using command promt, give path and ask them. You create your own Folder in AL11 and try to save the files in that folder only because it is easy to track and maintenance.
Thanks
Reddy

PDF Files Not Opening Within Browser(s)

All PDF files that I try to view within a browser (Firefox or Explorer) get sent (downloaded to) my download folder called, Downloads. In the past, I was able to view these files from within the browser...what I prefer to have happen. Can someone tell me how to have the PDF's open when I click on their link from within a browser? I am using the latest version of Acrobat Readeron a Windows 7 system running the Home Edition (64 bit).
Thanks for any help - this has been frustrating

Select a PDF you want to open, and right click on it.
- Select Open with...
- Select Chose default program
- Select your browser (or expand the Other Programs and select your browser)
- Make sure you check the "Always use the selected program to open this kind of file" option
- Click OK
- Double Click on your PDF.
Tadaaaaaaaa!

.svg files not rendering in browser

I've just uploaded my site (www.elcricdercas.com). None of the .svg files are rendering. This includes an Edge produced file in the front page animation. How come? I've checked the site on Safari and Firefox. The provider is Eclipse.net.uk

Hi,
Could you please check this thread, and see if get some hint
Re: SVG files not rendering in Muse

Files not appearing in browsing dialog

Similar Messages

Maybe you are looking for