Files not appearing in the File Sharing section

Hi Everyone,
I created a ringtone on the iPhone, using Ringtone Designer Pro. The problem is, when I connect my phone to the computer, the ringtone doesn't appear under the "Ringtones" icon in the file sharing section under my device in iTunes.
This problem is apparently prevalent with any app that supports file sharing in my case - I created a test document in Pages but that didn't show up either. The apps themselves are listed, but not the files created by them.
So far, I have tried uninstalling and reinstalling iTunes and all other Apple related software, without any improved results.
iPhone 4 32 GB, iOS 4.3.3;
iTunes 10.3;
Windows 7 Home Premium 64 bit.
Any help is greatly appreciated.

Connect your device to iTunes, select it in the left-hand colum, select the Apps tab, scroll down to File Sharing, select the app in question, in this case iMovie. Your file will be in the panel to the right.
tt2

Similar Messages

  • HT201250 I disconnected My Passport by mistake, and now Time Machine can not find it.  Although connected, it does not appear in the My Devices section of Finder.  What do I do?

    I disconnected My Passport by mistake, and now Time Machine can not recognise it.  It no longer appears in the My Devices section of Finder.  What do I do?

    Hello rjhc49,
    Thank you for the details of the issue you are experiencing with your external hard drive.  I found an article with steps you can take when an external device is not being recognized.
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Where is the file sharing section located in iTunes 12?

    I am trying to open up an iMovie Project that I sent to iTunes from my iPhone 4s. After the project exported my phone said "Send to iTunes Complete. Your project will appear in the File Sharing section of iTunes as: Horror short." But, I can't find the file sharing section anywhere on iTunes 12! I searched in the help section and it gave me this iTunes 12 for Mac: Transfer files between your computer and an app on your device But the last few steps are impossible to do, because the file sharing button does not exist! Please help me! I'm losing my mind. I made a short film and I just want to get it on my MacBook Air.

    did you not have an answer to this yet? its march now. whats that all about? I have the same problem, did you sort it out yourself?

  • HT201301 i can't find the file sharing section? why is that?

    i can't find the file sharing section? why is that? it's not shown on my iTunes. . .

    Please explain more clearly what problem you are having.

  • I have this ringtone app (Ringtones) but to get the ringtones i need to find the file sharing section, please help

    Please help i got this app froma different app called "AppGratis" that everyday lets you download something that costed money for free for just 24 hours. This ringtone app requires a file sharing section but i do not know how to find it. can anyone help me?

    There is no file sharing  section on the iphone itself or in itunes that I could see.
    Try looking at the app support site.

  • I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?

    I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?  Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

    leonieDF
    Thanks for your response.  My profiles are located within color sync utility as you can see here:   
    These profiles do not respond to clicking and dragging.  Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them.  Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement.  I have never needed the CMYK profile until recently, and that need has now past.  However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices).  I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space.  I don't face these restrictions with all the others, so it remains a curious circumstance for me.  I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether.  Again, many thanks for your attention to this matter.  The reach of this community is astounding.

  • HT2513 In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal

    In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?

    If you're running Mountain Lion (10.8.3), reminders is now a separate app.  Launch reminders from your applications group and you will be able to access File>New Reminder.

  • TS1702 With the latestes version of itunes I cannot transfer files to my apps.  There is no "File Sharing" section.

    With the latest version of itunes I cannot transfer files to my apps.  There is no "File Sharing" section.

    Yes there is.
    Connect the iPad to your computer. Launch iTunes and at the menu at the top of the screen, go to View>Show Sidebar. After you have the sidebar, click on your iPad name like you did in the past. Click on the Apps tab in the window on the right. Scroll down to File Sharing apps.

  • HT203176 When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17'

    When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''

    http://www.thexlab.com/faqs/trash.html for starters.

  • Why local file destype does not appear in the parameter form ?

    Hi,
    There is a Destype option Local File but it does not appear in the list for Destype in the Parameter form.Why?
    Even file is not working & the reports server is getting hanged if i specify the destype as file & a valid file name & format is given.
    Print option from the app server is also not working, i mean remote printing.
    My App server machine can see my local printer, but when i give the print share name or literally five\\machine name..printername then too print option is not working.
    Thanks
    Mahesh

    Hi Shaun,
    I'am using 9iDS & the reports documentation says that Local File DesType Option is valid for rwclient & rwservlet.
    When your specify in the command line option it works, no issues but in web reports where i get the parameter form Destype list does not contain Local File Option.
    For web reports i use rwservlet.
    i mean to say my url is something like this
    http://oracle.guru:8888/reports/rwservlet?report=abc.rdf&userid=a/b@c&destype=cache&paramform=yes&server=myserver
    one more peculiar thing, i have reported it on Metalink.
    As you can see in the above URL i have given an argument of destype=cache, if i do not give this then my parameter for will not come up!!!, why should i give a destype for the parameter form to be displayed?
    Ok coming to my current problem..
    in 9iDS Reports is Local File supported? i.e. when i give a URL like above(My parameter form has system & user parameters including DesType,DesName & DesFormat).
    coming to the file option in DesType.
    In my parameter form if i select Destype as File & give a valid file name & a valid Desformat the report server hangs i mean there is no activity on the client & after this any report requests from any other clients is not responded by the Reports Server.
    When i check in the performance monitor of my Reports Server the CPU Utilization will be constant at 100%
    Thanks
    Mahesh

  • I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

    I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
    Thanks
    Pheona

    Greetings Pheona,
    That appears to be a hard drive based camecorder.  Usually these mount on the desktop of your computer as a little white hard drive icon.  If you go inside you should be able to find the movie files the camera is saving.  See what format they are (the last 3 letters at the end of the file name is a good place to start).
    You can drag the movie files from the camera hard drive to the computer to copy them.  Then convert them with a video file conversion program to a format iMovie can understand.
    Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
    In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4".  Then import the resulting file into iMovie and see if that works any better.
    If that program can't convert the files you can try another file conversion program:
    http://www.southpolesoftware.com/iVI/iVI.php
    http://shedworx.com/voltaichd
    http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
    Hope that helps.

  • TDM Importer in Excel 2003 does not appear in the COM Add-In Menu

    I have a program that will create a TDMS file with the data, and after execution is complete, I would like to import the data into Excel and manipulate it using a macro. I can import the file manually and run the macro by opening a second file containing the macro, but opening up the second file is a hassle.
    I would like to expand the macro so that it automatically imports the TDMS file, and based on what I've seen on the forums, in order to do this, I need to register the TDM importer as a COM Add-In. When I go to the COM menu in Excel and try to add ExcelTDM.dll, it does not appear in the menu.
    Some additional details that may be helpful:
    Excel TDM Importer is version 3.4.0.0
    I have already tried uninstalling and reinstalling the importer
    Using the Excel toolbar works to import the data
    Double-clicking on a file works to import the data
    The installed files are located at C:\Program Files\National Instruments\Shared\TDM Excel Importer. Moving them to C:\Program Files\National Instruments\Excel TDM had no effect.
    Thank you in advance for your help.
    Solved!
    Go to Solution.

    StefanR wrote:
    Does the simple VBA example as described here:
    http://www.ni.com/white-paper/10207/en
    work in your case?
    No, it doesn't. Excel does not see the add-in in the COM Add-In window, so I cannot access it using VBA.

  • Apps downloaded do not appear in the library

    I just bought my 4th gen iPod touch yesterday. I used iTunes' store and chose a bunch of apps, and they would download in itunes. Now most of them do not appear in the "apps" section of the library, so I cannot sync them to my ipod. some of them are free some are paid. what should I do? I've looked at the support forums, google, etc and nothing. I've restarted itunes, the ipod, auth/deauth the account... nothing changes.
    thanks,
    uriel

    Edward:
    Do you have a Roll 816 visible in iPhoto?
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • Cross Reference Sources appearing in Story Editor view but not appearing in the Cross Ref pane

    I have imported a Word document containing working cross references into an InDesign document. The vast majority of these cross references import correctly and link to their destinations within the document, however there are some that are not working. If I view the text frame in the story editor view, I can see these "broken" cross reference sources that came in from the Word doc but on selecting them I can see that there isnt a corresponding entry for it in the cross reference pane. As said, there are only a few that are behaving like this.
    What could be causing these not to appear in the cross reference pane?
    Obviously as they are not appearing in the list of cross references I can't update them, and also, as they are technically broken cross references, because a source exists for them but there is no corresponding entry in the pane, then on export to epub, InDesign crashes (If there is one broken cross reference in a document, export to Epub will crash indesign).
    Also, to clarify, in the Word doc if I navigate to a cross reference that is failing once in InDesign, I can update it properly, and also navigate to its destination in the Word doc, so it's not as though these cross references are broken before coming into InDesign. Also I believe the destinations for these "broken" cross references are coming across properly to indesign too as I can see them in the story editor view.
    Supposed Cross Reference source selected in Story Editor view on left, but no corresponding cross reference highlighted in pane on right:
    Technical Details:
    InDesign CS5.5 - Version 7.5.3
    Microsoft Word 2010, File type .docx

    I have found the possible cause of this problem!
    If a table is used within the Word document somewhere between where the cross reference source is and its destination then that particular cross reference will be broken as described above in my initial post.
    So the "fix" is to remove any occurances of a table in the Word document and the cross references come into InDesign perfectly. This is actually not a fix at all. I need to use tables in the Word document for layout purposes so if they break cross references if they stand between them and their destinations then I have to compromise, i.e. use tables but with no cross references in the document or vice versa.
    I found a similar issue recently with index markers in Word causing a shift on the cross reference tags when bought into InDesign. The "fix" again for that was to remove all index markers from the Word document. See post about this here: http://forums.adobe.com/thread/1043981
    InDesign really needs to sort out the issues with importing of Word documents with cross references in them. If I can't use index markers and tables in a Word document without breaking its cross references then they can't claim to have the ability to import a Word document while maintaining its cross references into an InDesign document. It just doesnt work as ive painstakingly proven.

Maybe you are looking for