"Files not found" and network drive

I'm new to iTunes, and I think there's something fundamental I don't understand about it. I'm hoping someone here can clue me in.
Here's the situation: I have iTunes 7 on a 2.8GHz laptop running WinXP. It's connected via ethernet-based home network to a 400MHz desktop running WinXP. I have a lot of MP3s and M3U playlists created with Winamp on the desktop, which has a much larger hard drive than the laptop -- IOW, I'm not willing to move the MP3s to the laptop, but I want to run iTunes using the laptop's faster CPU (it also has the high-speed USB port my wife's "new" 4G iPod requires).
So what I did was to point the iTunes music folder to the mapped network drive on the desktop and then import all the M3U playlists into iTunes. So far, so good. I can then sync the iPod and all the songs get copied over. However, the next time I reconnect the iPod, all the songs have the "!" symbol next to them, indicating iTunes can't "find" them. When attempting to sync, I get the message that the songs were not copied because they could not be found. I can manually re-point the files to the directory on the mapped drive, but what a pain! The files in the mapped directory are in multiple sub-directories, but iTunes doesn't seem to have trouble searching recursively through sub-directories, so I doubt that's the issue.
I don't see anything in the documentation about problems of this nature with network drives. Is this a "known" issue in the sense that everyone else knows about it except me? If this has been discussed elsewhere on the forum, let me know.
TIA,
Eric
Dell Windows XP Pro

I too find it disturbing that this software is not "home network friendly" I have a similar setup and have digitized 200+ cd's including everything that my kids listen to as well. There are also several wirelessly connected computers in my house, and the last thing I want is a half-dozen copies of every song scattered throughout the house chewing up disk space. So far, I have 3 iPods in our household and my goal is to centrally store music files and allow network access from remote pc's on my network to sync our iPods with music that we own. Windows Vista has this capability with media player 11, and if I were so inclined, I would buy generic mp3 players that are compatible with MS MP sync, but I would like to give Apple a chance to add this feature. If not, the iPods can always be sold on ebay and replaced with MS compatible devices. I don't really want to do this because we do like our iPods.

Similar Messages

Sequence not Opening: File not found and Out of Memory Error Message

Hello
Attempting to open sequence in FC gives me the error: File not found.
Clicking on okay in the message gives another error: Out of Memory.
Final Cut Pro version is 6.02
Anybody have a solution on how to get this sequence working again?
Thanks

Project itself opens fine.
Can a sequence file with in a project become corrupted?
Luckily, I always make duplicate of the sequence I'm working on at the start of the day. And I save often when I'm working.
The earlier duplicated version of the sequence works, so not everything is lost.
Unfortunately the auto save was disabled in my profile, back on it goes.
I was wondering if this has happened to anyone before and that if there is a fix - if it is not a corrupted file?

Before i did not have to type a full address for a website to come up, just a key word e.g. "Firefox" would take me to mozilla, "google" would take me to google... now I get "File not Found" and rather have to type a full URL address, why is this?

File not found
Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/omni.jar!/chrome/en-GB/locale/browser-region/region.propertiesgoogle.

Try this:
http://www.groovypost.com/howto/how-to/change-firefox-4-address-bar-search-engine-provider/

HT203164 Error trying to burn a CD from an iTunes playlist - files not found on hard drive??

I have a new computer with Windows 8 Home Premium. Before the old computer crashed, I had backed up all my iTunes Media in the cloud. I had also purchased a soundtrack album from the iTunes store and put the songs into a playlist. All media was matched with the new computer, and the new computer was authorized by me in iTunes, so all my previous media shows up in iTunes on the new computer. The only symbol next to the song titles in iTunes for all my songs is a picture of a tiny cloud.
When I play the songs in the playlist from the new computer in iTunes, they all play just fine. However, when I try to burn a CD with the songs in the playlist, I get this error message (it has no number associated with it): The song "[name of song]" could not be burned because the file cannot be found on the computer hard drive. I tried burning CD's from any other playlist but was not able to burn a CD from ANY playlist; I get the same error message no matter what I try to do. I would really like to be able burn CD's from iTunes, because that's what plays in my car. Hooking up an iPod in the car does play music, but it is faded and of bad quality (my car is an '05 model).
Does anyone have any ideas on what is wrong here and how I can fix it so burning CD's in iTunes will again be an option? I don't burn many CD's but would really like to be able to do so. The version of iTunes I have is 11, all the iTunes files are updated, and the CD drive is working fine, I am able to play CD's in iTunes from it and burn other songs to it using another media player. I am also using top-quality new blank CD's, and when trying to burn a CD from a playlist, I select Audio CD with 2 seconds for the gap between songs, and the album text, then I select Burn. I've tried selecting other options in turn, but get the same error message.
Thank you in advance to anyone who can help with this issue - it seems I am the only one having it.

I actually solved this problem myself. I discovered, while playing around with the new iTunes, that clicking on PLAYLISTS on the menu bar shows the playlists that I have created on the left side of the window (like the old iTunes used to do by default). I scrolled down to the playlist I wanted to burn to a CD, right-clicked on it, and a menu came up. I selected DOWNLOAD....this downloads my playlist songs from the cloud to my computer hard drive. After that, the little "cloud pictures" next to my songs disappeared, and I was able to burn the CD with no problems.
I hope this helps someone else....I was quite lost for a while. Which is amazing, considering how user-friendly most Apple products have historically been.

File not found and exception during commit of transaction

Hi All,
We are using weblogic 8.1 sp5 and oracle 9.2. In a business process (jpd), I am getting this message and exception immediately after publishing a request document(xml) to a channel and goes to the next process node and the process aborts. Any thoughts are appreciated. Please let me know soon.

Thanks in advance!
Prashant

Message:
Could not find a file for class oracle.jdbc.driver.T4CXAConnection

If I hit continue while debugging then I get this exception:
<Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-0049BFC11227BCBD651D(24359063),Status=Rolled back. [Reason=javax.ejb.EJBException: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable],numRepliesOwedMe=0,numR
epliesOwedOthers=0,seconds since begin=645,seconds left=60,XAServerResourceInfo[JMS_cgJMSStore]=(ServerResourceInfo[JMS_cgJMSStore]=(state=rolledback,assigned=qbAdmin),xar=JMS_cgJMSStore,re-Registered = false),XAServerResourceInfo[cgPool]=(ServerResourceInfo[cgPool]=(state=rolledback,assigned=qbAdmi
n),xar=cgPool,re-Registered = false),SCInfo[qbDomain+qbAdmin]=(state=rolledback),SCInfo[current+qprocwlp1]=(state=rolledback),properties=({}),local properties=({modifiedListeners=[weblogic.ejb20.internal.TxManager$TxListener@397bfb], weblogic.jdbc.jta.cgPool=weblogic.jdbc.wrapper.TxInfo@4eb65b}),Own
erTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=qbAdmin+10.1.130.38:7003+qbDomain+t3+, XAResources={JMS_FileStore, JMS_QProcureFileStore, cgPool, JMS_cgJMSStore, bpmArchPool},NonXAResources={})],CoordinatorURL=qbAdmin+10.1.130.38:7003+qbDomain+t3+): javax.ejb.EJBException:
Exception on insert: java.lang.RuntimeException: Unable to serialize invocable at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1837) at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:193) at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:171) at com.bea.wlwgen.PersistentContainer_bajz39_Impl.ejbStore(PersistentContainer_bajz39_Impl.java:149)at weblogic.ejb20.manager.ExclusiveEntityManager.beforeCompletion(ExclusiveEntityManager.java:593) at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:737) at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1026) at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:116) at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202) at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1974) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430) at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333) at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298) at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2686) at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: java.lang.Exception: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable
at .bea.wlw.runtime.core.bean.BMPContainerBean.doInsert(BMPContainerBean.java:1909) at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1817)... 18 more
Caused by: java.lang.RuntimeException: Unable to serialize invocable at com.bea.wlw.runtime.core.container.Invocable.toByteArray(Invocable.java:812) at com.bea.wlw.runtime.core.bean.BMPContainerBean.doInsert(BMPContainerBean.java:1859)... 19 more
Caused by: java.io.NotSerializableException: java.util.AbstractList$ListItr at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.bea.wlw.runtime.core.container.Invocable.toByteArray(Invocable.java:803)
... 20 more
--------------- nested within: ------------------
weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion: sync=weblogic.ejb20.internal.TxManager$TxListener@397bfb
Exception on insert: java.lang.RuntimeException: Unable to serialize invocable - with nested exception:
[javax.ejb.EJBException: Exception on insert: java.lang.RuntimeException: Unable to serialize invocable] at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1684) at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:311) at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228) at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430) at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)

One possible cause of this issue is that your JPD may have some non-transient field(s) which is/are not Serializable. Check for the warnings in the Workshop, that may point you to such fields.
~Balwinder

I can't run itunes or install updates now due to teh MSVCR80.dll file not found and APS Daemon.exe being nable to locate a component ofn Windows vists. A MS user suggested uninstalling all Apple programs. I did this but could not uninstall the Apple Mob

I have been getting error messages .n MS windows the APS Daemon ,exe is unable to locate a component and the itunes updates and program failed to start because MSVCR80,dll was not found. As advised I have uninstalled all Apple Inc. programs except the Apple Mobile Device program. Then I reinstalled itunes but still get the errors and can't run itunes. Advice....

See Troubleshooting issues with iTunes for Windows updates.
tt2

Create additional installer error code -12 file not found from device driver cd

I'm trying to build an installer for a project that includes several NI drivers - specifically NI-DMM. NI-SCOPE, NI-SWITCH, NI-845x, and a few others (MAX, DAQ, etc). When I build the software standalone (and only include the run-time engine), it works fine. However, when I try to build the installer with the additional installers (mentioned above), the build prompts me for device driver cds, and then fails. Specifically, it fails on the February 2006 Device Driver cd. The error is attached below.
I have tried
- repairing all the installations of the software mentioned
- using a new project and re-adding the files
- building the additional installers seperately (no source code installed)
- copying the driver cds to the harddrive and referencing them there when needed
The next step will be to reinstall all of those drivers from scratch, but I really would prefer not to. Does anyone have any ideas (or solutions) regarding this problem?
CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> CDK_Engine_PromptForMissingDist.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI-845x Software 1.0.1' from: C:\National Instruments Downloads\NI-845x\1.0.1\ to: C:\PTF\Builds\**********************<edited out>
Copying distribution 'National Instruments Device Drivers - February 2006, Disk 1' from: C:\National Instruments Downloads\DCD-Feb06-1\ to: C:\Program Files\National Instruments\Shared\ProductCache\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the file specified.
*** End Error Report
Done building deployment

I have had this happen a lot espescially with LV 8.0 -8.20. What I had to do was take the device drivers CD and copy it to the and run the installation of the software from the copy on the hard disk.
When you build an exe with additional installers it looks at the last place that you installed the drivers from. Anyway it worked for me so it might work for you.
Joe.
"NOTHING IS EVER EASY"

Saved as jpeg...file not found and cannot reconnect

I edited a photo in elelments 12. As I finished I saved it. I was trying to share it online and the file could not be read so I renamed it as a jpeg. Now when I open my organizer to view the photo it says the file cannot be found, even though I can see the picture in my organizer, and it asks me to reconnect the original edited file. However, that file cannot be found when I search for it. How can I convert it back to a psd file from a jpeg in my organizer. I tried to rename it again and it will not let me. I have about 5 pictures that are doing this. I finally realized to make a duplicate and rename that file, on the other pictures I have edited, however I really need to see the "lost" pictures in my organizer as well and it just pulls up a blurry photo and says "trying to reconnect lost file." There is a question mark in the top left corner of those files as well.

If you copy the location from the explorer properties, you won't get the file name, just the location. Don't forget to add the file name at the end.
Suggestion: Why don't you remove the path input again, but temporarily create an indicator at the path out. Run it again and browse to the path to make sure it works. Now right-click on the temporary indicator terminal and select "change to constant". Now wire this to the path input and it definitely should work.
Compare it charater by character with your own path constant to see where the problem is.
LabVIEW Champion . Do more with less code and in less time .

"File Not Found" on copy/paste files!

I had one big "real instrument" file that I decided to split into several smaller files. To do this, I would copy a section, paste it into a new file I had created, saved the new file, and then delete the original.
Now, when I try to open them, only a few will actually play. The others say "Audio File 'Recording#04.aif' not found,'" the Recording# varying with the tracks. It gives me the option to either "skip" or "search," the latter leading to a message that says the same thing, only this time with an exclamation point at the end. I then click "continue," which brings me to the file with a purple track section the same length as the music that used to be there, only now saying "file not found" and without any music on it.
Is there any way to retrieve these files?? It happens with 7 of the 10 files I did this with.

I dont have the latest version of GB. I have whatever version is on a 2010 macbook pro.
That would be some version of GarageBand '11, but did you ever run Software update, to be sure to have the latest GarageBand '11 version compatible with your 2010 MacBook? You can check the version number of any Mac application from the "About" panel. In the main menu bar click the name of the application in the upper left corner of the screen and select the menu entry "About ...". This will show the version number.
GB doesnt crash....the files just seem to go missing.
How much free disk space do you have? Running out of disk space could explain what you are seeing.
Do you have the latest driver for your audio interface installed?
Check the manufacturer's page: http://tascam.com/product/us-144mkii/downloads/
I can find crash logs....but the tracks are useless....i cant edit them or anything.
Do you mean you found the audio files in the "Media" folder, when you open the package? Then try to copy the audio files out of the package, and drag the copy back to the guitar track. Do they play?
Should i upgrade to the latest operating system and the latest version of gb??? Any help would be very much appreciated. 2010 macbook pro.
Upgrading to a different system and the newest GarageBand 10 will not help, if we do not know, what is causing the problems on your Mac. Run software update to make sure,you are running the latest update of your current GarageBand version.

I get an error message 7-Zip file not found

When I am trying to download Mozzila I keep getting an error message that states 7-Zip file not found and it won't let me download the browser.

Hello psimonsen, you don't need 7-zip program to download official firefox, see: [https://support.mozilla.org/en-US/kb/install-firefox-windows Install Firefox on Windows]
another official link : http://www.mozilla.org/en-US/firefox/all/
thank you

Oracle DB 11g Release 2 Installation in Solaris OS for SAP - issue: Files not found

Hello All,
Having problem during my installation of oracle DB.
the installer keeps on prompting that files not found and the directories and files permission seems different from expected
I attached the images of the files the installer is looking for and also the /oracle/<SID>/11ginstall_11202.log
I also attached the thing i put in ENV command
Not sure if its the issue in the oracle profile or installer itself or wrong input
please help

Hi Frogoso,
Please have a check on the known issues SAP note for Oracle installation.
Section G: is related to Solaris
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
You may re-check whether all the Solaris related pre-requisites are met before executin RUNINSTALLER.
Suggestion here would be to go with latest available Oracle patch 11.2.0.4 as you are installing a new system.
Hope this helps.
Regards,
Deepak Kori

File not found if No Hit along time to Serevr

Hi guys ,,
Am using Shaepoint2013 with Serevr2012.
I have an Issue with SharePoint Site If there is no Hit on the server after some times it show me error with "File Not Found"
and after a while everything is going OK .
Is there any setting in IIS i have to do .

Do you mean that if no-one uses your site for a while then it tries to load a page but times out?
If so this is probably due to the sites falling out of the cache. Whilst you can muck about with some settings there it's not a great idea. A much safer option is looking into why it takes so long to spin up. There's a stage that SharePoint goes through
before starting the application pool called the Certificate Revocation List checks (also known by some as CAPI2 errors), this can take a long time if you don't have internet access from your servers and can slow down application pool starts.
https://support.microsoft.com/KB/2625048?wa=wsignin1.0
Sir ,, I dont have internet access , my Site in Intranet
The users connect to real Server through DNS there where I have my Own Custom Site Name.
in the Morning when the First User try to connect it give "File Not found" for Some time, But if I change the Url goes to Direct to reall Serevr One Time , there every thing is fine Even through
DNS

After kernel upgrade "file not found"

I upgraded to kernel version 3 and I rebooted but I didn't do anything in menu.lst, because I thought symlinks would work, so I rebooted but it didn't work. I tried to boot changing names in grub menu but I'm always getting same error "file not found" and I don't know what else to do. I can see the vmlinuz-linux but I can't see initramfs-linux file in /boot from a Live CD. Can you share your menu.lst to try them please.

tbuitenh wrote:
I ran into the same problem. I bookmarked this thread earlier, sorry if the problem has been solved in another one and I didn't notice it.
After putting back the kernel and ramdisk from a backup (using different filenames) and downgrading the kernel (mkinitcpio doesn't work, that's why I had to take the ramdisk from a backup), I was able to get back into my system.
I found a mkinitcpio.conf.pacnew, but no significant changes in there. Applied them anyway.
So let's try that again...
sudo pacman -Syu
(3/5) installing linux [######################] 100%
>>> Updating module dependencies. Please wait ...
/tmp/alpm_kwQ6VA/.INSTALL: line 10: depmod: command not found
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
/tmp/alpm_kwQ6VA/.INSTALL: line 12: mkinitcpio: command not found
Optional dependencies for linux
crda: to set the correct wireless channels of your country
That doesn't look healthy. Perhaps a path problem?
[tb@progress ~]$ su -
Password:
[root@progress ~]# pacman -S linux
warning: linux-3.0.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.0.1-1
Total Download Size: 0.00 MB
Total Installed Size: 54.55 MB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading linux [######################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [autodetect]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux.img
6472 blocks
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
13946 blocks
==> Image generation successful
[root@progress ~]# ls -l /boot
total 12484
drwxr-xr-x 2 root root 4096 Aug 15 12:18 grub
-rw-r--r-- 1 root root 5216044 Aug 15 12:41 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 1460104 Aug 15 12:41 initramfs-linux.img
drwxr-xr-x 2 root root 4096 Jan 26 2011 memtest86+
-rw-r--r-- 1 root root 1453292 Jul 11 19:22 offmylawn.img
-rw-r--r-- 1 root root 2333056 Aug 6 16:22 vmlinuz-linux
-rw-r--r-- 1 root root 2305152 Jul 9 15:00 vmlinuz-offmylawn
That's better. I'll reboot now and see what happens.
@tbuitenh: I encountered this same situation today when I tried to update linux-ck-corei7 from 3.0.4-1 to 3.0.4-2. Like you, running pacman after "su -" (instead of "su") permitted me to complete the update.
I figure this has to do with default login path, right? What exactly is going on here, and how can I fix it? I don't normally run pacman this way.
Last edited by dhave (2011-09-22 23:07:53)

Moved my files to external hard drive, now files not found. Help?

My Itunes folder having outgrown my memory, I moved all the files to my external hard drive, following the directions in Itunes. I was able to play the songs as long as the hard drive was connected. However, I opened Itunes mistakenly without the E: Drive connected, and it opened blank, with no files in place. I closed, hooked up the hard drive, and opened Itunes again, holding down the shift key and choosing the library on E: (the xmp file). The files now show up, but when I try to play them, I get a message indicating that the file isn't found, do I want to find it? I can, but I don't want to go through 5000 files and add each one individually. If I try adding or importing the folder again, the file is simply in itunes twice. I can always import everything again, but I don't want to lose all my ratings, last-played, etc. It took a lot of time to listen to and rate all those songs. Any help would certainly be appreciated. Thanks.

I am having the same problem. I moved my itunes library to an external drive to free up the space on my notebook and now I "get files not found do you want to search" If I search I can find the song in Windows but have to find each song individually, I have 2600 songs I burned from my CD collection, it would take way too long. I have tried copying the file to the same drive, I have reintalled itunes multiple times. I have checked Apple and my computer is "authorized". Is there any way out of this? Otherwise I will be limited to just having the music I already have on my ipod and being unable to add any more, and if that ever bocomes compromised I would be unable to restore it. None of my music is purchased from itunes, it is all burned from my CD's.

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

"Files not found" and network drive

Similar Messages

Maybe you are looking for