Files not getting picked up using Sender Communication Channel frm MDM sy

Hi Experts,
XI sender communication channel is configured to pick up any files coming from MDM system from the following path
/XXX/XXX/mdm/mds/XXX/XXX/Material_Master/Outbound/P33/P33_R3_PORT/Ready
Earlier we had the scenario working properly that created idocs in R3 system.(MDM>XI>R3)
Currently i tried to test the scenario again but i don't see an entry in the sxmb_moni or tried checking whether the sender communication channel is working properly it showed polling correctly in RWB.The files are already sitting in the the above path.XI should be picking it up but don't know what the problem is?
I also tried a test in RWB>Integration Engine>Test Message put the payload and it was able to create idocs in R3.So i concluded there is an error in picking up message from MDM.
Is there any log available for the commmunication channel where i can see error info of whether any files picked up or not.
Please suggest me what all can be done to to ensure the CC is picking up the files.
Earlier responses highly appreciated.
B'Rgds,
Sudhansu

Hi,
In addition to the RWB channel check suggested by Aamir, you should also check if the channel is
1) Active in ID
2) Channel is not locked in VA, if it is locked then your status in RWB will show processing started but the files wont be picked up...for more details check the unlocking procedure mentioned in this thread:
JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED
The unlocking procedure is the same for FILE and JDBC....
Regards,
Abhishek.

Similar Messages

File not getting picked up JMS sender communication chnanel in EOIO mode

Hi Experts,
We have a scenario to process the messages in sequence via JMS sender comm channel. We changed the jms channel to EOIO, after the change, the channel is in green but no message arrives to the Adapter engine.
We are working on a newly installed PI 7.11 system.
When i change the jms to EO the files are getting picked and processed by the channel from the JMS MQ client.
Is there any setting that needs to be checked or changed?
Are any drivers issue?
Thanks.

Did you create the Queue to be used for the EOIO messages ?
For EO it would used any of existing Queues to process the messages for EOIO you have to mention specific Queue name which has to hold the messages in EOIO fasion.
pls share the config details of JMS Sender Processing Tab. I'm sure once you setup the Queue it should work.
Thanks
Kishore

File not getting picked with Sender Adapter

Hello Experts,
i have configured file sender adapter which is polling configured directory every 60 sec. But i could see file not getting picked up. when looked into Communication channel monitoring i could see following error:
Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException : Message ID aa2ec9a0-44b3-11dc-9c5b-0003baa19669(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPDX1DB.SYS_C00120924) violated.
is this due to adapter cache. we are on SP20.
has anybody faced this problem earlier?
Thanks in advance.
Regards
Rajeev

Hello
actually there was small problem in file generation and hence it was failing in message mapping which is resolved. but still that problem is there when it is attempting to delete the file. hence it is not able to delete that file.
can we manually clear the send queues or should we refresh CPA cache?
Thanks
Rajeev

File not getting picked by File CC

Hi Experts,
Q1)An issue in files not getting picked up by communication channel in an inbound scenario R/3<XI<-File Port
Retry interval started. Length: 120.0 seconds
7/24/09 1:33:14 PM   Error occurred while connecting to the FTP server "XXX.XXX.XX.webdti.com:21": java.net.SocketException: Connection timed out:could be due to invalid address
7/24/09 1:32:00 PM   Processing started
Any Quick helps highly appreciated.
Q2)How can i restart an file adapter?
Thanks,
Sudhansu

Hi Sudhanshu,
   Regarding your first question, check if you are able to access the file port manually typing the ftp address in internet explorer or any browser.
Regarding your Q2, read this:
http://help.sap.com/saphelp_nw70/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/content.htm
(CTRL+F for "To restart the adapter")
Regards,
Ravi

File to File (file not getting picked)

Hi ,
I am having a file to file scenario. My file is not getting processed from the source directory. When i check in the communication channel monitoring bith my sender and rcvr communication chanels are wrking fine.
I have placed the source file with the name mentioned in the sender communciation channel.The processing mode is Archive.
My file Name is Actual_Labour_Cost.NE*.txt in Sender cc.
so i placed the file With Actual_Labour_Cost.NE.
Kindly suggest.
Regards
Sai

Hi,
If you have using thec orrect file name and extesnsion in the comms channel and still the file is not getting picked up then Could you check the file permission/authorizatios for the XI user you are using in XI to pick up the file from the source directory ?
The file should at least have the permissions to Read/Write.
Regards,
Vishal

Files not getting picked from the FTP site

Dear All,
We are having one File-XI-RFC scenario running in XI-PRD Server. Sometimes what happens is that files available in the FTP site are not getting picked by the File adapter. I have checked in the adapter monitoring and communication channel is active there. Also, there are no errors regarding this in SXMB_MONI. I have configured alerts also but for this case no alerts are getting trigerred. And also when I am reactivating that particular communication channel then that file is getting picked instantaneously.
Can anybody please guide me on what might be the real cause for this as this error is happening randomly.
regards,
N.Jain.

HI,
Have you used per File transfer parameter in FTP Communication channel.
It makes the FTP adapter inactive in ideal time.
So add the poll interval may be for every 30 mins or something like it. It will forcefully activate the FTP port after every 30 mins. You may have the poll interval for every 1 min. Only the files to be picked up are getting logged in in XI monitoring.
So there will be no garbage collection of unwanted messages in Monitoring.
Thanks
Swarup

File not getting picked.

If a file is not getting picked
where can be issue...what is the first thing we should do....
what is the exact location we should go...
Harsha

Hi Harsha,
As your FTP is not picking up the file , you can please try out the following.
1. Kindly check whether you are able to ping your server.
2. Check whether you have correctly entered the name of your source folder in the sender communication channel.
3. Also confirm the name of the file you are trying to send is same as mentioned in the sender channel.
4. Check the user credentils ,i.e. you have entered the correct id and password in the sender communication channel.
5. Please check the permissions of the the source folder i.e. they should be "write / read " with read atleast.
If you are still facing the same problem ,kindly revert.
Kindly reward the points if you find this reply has helped you solve / analyzed your problem.
Regards,
Vishal

File not getting picked up by the FTP Adapter.............URGENT

Hi Experts,
I have created simple File to File scenario to archive a xml file of size 640 MB with in a FTP server.
I monitored the channel for 2 hrs, it started but didn't picked the source file.
Is it because of the huge file size?
Please give your valuable suggestion, to resolve the issue.
Thanks in advance.
MK

The scenario was working fine before with the small files.
Error details in the communication channel monitoring( for the sender adapter):
error      12/03/08 04:54:12 <message id> Retry interval started. Length: 3660.0 seconds
            12/03/08 04:33:40   Processing started
error      12/03/08 04:32:23 <message id> Retry interval started. Length: 3660.0 seconds
             12/03/08 04:20:22   Polling interval started. Length: 3660.0 seconds
             12/03/08 04:20:22   Processing finished successfully
              12/03/08 04:20:03   Processing started
And i have checked RWB and SXMB_MONI, it does not show any message.
Please suggest further to resolve the problem.
Thank you.

Alert for file not getting picked up

Hi,
how to create an alert when the file is not picked by adapter..consider a file adapterr...
i mean the file is at the location...for some reasons the file is not being picked up....how to trigger an laert based on this.

Aamir,
its not an error...its just a requirement i need to fullfill.
do you have any idea how to go ahead.......
one more thing ..
can you brief me what u said here....if file is not picked up due to some network connectivity issues and you get error in AE then alerts will be triggered
u said only AE and IE errors are captured..then how about the above line u said....how will we trigger alerts...
Edited by: Harsha reddy on Jun 24, 2008 8:03 PM

Update query not working in the JDBC sender Communication channel

Hi,
We are working on JDBC to File scenario. As per the configuration, XI should pick the data from SQL database every 20 secs and should update the corresponding flag. We are using subquery in the select and update statement as both header and detail tables are involved.
Now the issue is, select query is working fine but update statement is not working as expected. It is somehow updating some other records rather than doing for the ones selected by the adapter.
Moreover logSQLstatement is also not working. Hence we are unable to identify the records which are getting updated.
Please advise.

Hi Rumi,
See Question 8. Transaction Handling (Sender) in [SAP Note 831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=831162].
8. Transaction Handling (Sender)
Q: If I have the following configured in a JDBC Sender:
Select Query:
SELECT column FROM TABLENAME WHERE FLAG = "TRUE"
Update Query:
UPDATE TABLENAME SET FLAG = "FALSE" WHERE FLAG = "TRUE"
How do I know that the JDBC adapter will not update newly added rows (rows that were
added between the time that the SELECT and UPDATE queries were executed) that were
not read in the initial SELECT query?
A: The SELECT and the UPDATE are run in the same DB transaction, i.e. both statements
have the same view on the database.
Make sure that both statements use the same WHERE clause. An additional
requirement for the correct operation of this scenario is the configuration of
an appropriate transaction isolation level on the database
(i.e., repeatable_read or serializable). You might also consider using a
"SELECT FOR UPDATE" statement instead of a plain SELECT statement to
ensure proper locking on the database. "SELECT FOR UPDATE"
is not supported in MS SQL database. In this case please make use of an
appropriate transaction isolation level on the database. For more details
please contact your DB vendors.
After, see Transaction Handling Issues in [SAP Note 1039779 - JDBC Adapter issues(Escape character,Transaction handling)|https://websmp130.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1039779].
Best Regards.
Pedro Baroni

Get parameters for rfc sender communication channel

Hello everybody,
does anybody know how to establish the values for the cc-parameters?
For example:
Where do I receive information about:
- the Application Server (Gateway) = Gateway host name of the sender system
- the Application Server Service (Gateway)
- the Program ID
etc.
Regards Mario

hi,
did you have a look at my weblog?
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
>>>- the Application Server (Gateway) = Gateway host name of the sender system
fomr SAPlogon
>>>>- the Application Server Service (Gateway)
SAPGW + system number from SAPlogon
>>>>- the Program ID
any name
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

File is getting picked up by Communication channel but not processed by XI

Hi,
I have a File to File scenario. The input csv file is getting picked by the sender communication channel but its not being processed by XI and thats why no entry is coming in sxmb_moni.
Then I think the message might getting stucked in the inbound que and it comes true. I delete all entries in smq2 but then again process the files but still it is not getting processed by XI rather the entry again came in inbound que.
Br,
Madan Agrawal.

Hi,
goto SXMB_ADM-Manage Queues-De-register
And Register again
Now trigger the scenario, it shld work
Also cross check with this Blog
/people/prasadbabu.nemalikanti3/blog/2006/02/13/configuration-of-a-central-integration-server
Regards
Seshagiri

Getting the Error at RWB Communication Channel Monitoring

Hi,
I'm getting the following error message in the RWB - Commincation channel monitoring level. I have used teh Module configuration
for doing Asynchronous to Synchronous bridge ( File to RFC to File ) . For this I have used the following modules in my sender File adapter - 1 .AF_Modules/RequestResponseBean , 2. CallSapAdapter ,3. AF_Modules/ResponseOnewayBean.
My PI version is PI 7.0 (EHP 1 ,Service pack 5) This version will suport the bellow module configuration .. or not...?
I had done the scenario by folowing the same wiki .
http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)
But I'm getting the following Error messages
Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task. ErrorStack:
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task..
Transmitting the message using connection http://TDX01SMX:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
The message status set to FAIL.
Please suggest me any corrections.
Regards
Jain

Hi,
My communication channel was not stopped. and when ever I'm keeping a file in the source directory ,my sender communication channel becomming Red Led. and it was showing the Error status at RWB. If I removed the Module configuration that is working fine (for normal asynchronous process) But I need to get teh response message back to the Legacy file systems .
I'm sure that Module configuration only creating an Issue at this scenario.
My Version is PI 7.0 ( EHP- 1 with latest service pack 5). Please suggets me the corrective action need to be taken.
Regards
Jain

PI sender communication channel not reading files from NFS directory

Hello,
I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
Any suggestions?
Thanks,
Sangita

Hello Sangita,
Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
You can use NFS protocol when you have a local directory in XI server.
Best Regards,
.Luis Bernal.

File sender Communication Channel is not working

Hi friends
we Created File sender Communication Channel and Activated but It is not picking up file
1. 0 messages in Message Monitoring
2. My Communication Channel not appearing in Communication Channel Monitoring also
3. We have refreshed the cache and activated the channel.
we chack with File name, Directory name and path ....
Friends have any idea
Regards
   Viswanadh Vadde

Perosnally, I would recommend setting a trace and letting the system telling you exactly why.
Traces are used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level. This is done with the help of the log configurator service:
Log onto the Java Admin Console
     Services
     Log Configurator
     Locations
     Choose the location (Java package) and the tracing level (severity)
(for example, com.sap.aii.adapter.file)
     Root Location > com > sap > aii > File
     Set the severity and choose Copy Severity to Subtree

Files not getting picked up using Sender Communication Channel frm MDM sy

Similar Messages

Maybe you are looking for