Files not shown in Catalog

I am in the process of moving files from one Hard Drive to another, both in the LR Catalog. The files shows in Explorer but not in the Lightroom Folder. When I try to move the same file from one LR folder to another folder on a different drive but in LR, it wont move it because it says it exists. However, when I try to add that file to the LR catalog is says there is nothing to add.
As a test, I made a new folder in LR; I used explorer to move the file. Then I used LR ADD feature to attempt to add the file to the Catalog. It does not add the file.
I give up; anyone have any ideas?

anyone have any ideas?
Yep, quite a few. Instead of trying to add them back into LR, simply right-click on the folder, and reconnect it to the folder in the new location.
If you relocated many folders, but kept the folder layout, your best bet is to "promote parent" so that they appear under one top level folder, and then reconncect only that one, as LR will then find the rest of them under it.
Cheers!

Similar Messages

Files not shown in main catalog

Why does my main catalog say that there are 17 files not shown? There are no hidden files.

Thank you Brett; I have several files in stacks. I am new to Photoshop and still learning the program.

Users in flat file not shown in Ressources Tab

Is it normal that users saved in flat (XML)files are not shown in the ressources tab?
When I acces the active directory or a WINNT or Solaris passwd file I see a "+" in front of the ressource with clicking on it I see all users within this ressource.
But there's no "+" in front of my XML ressource also I have some users saved within my XML file!?

I think you must be looking at the reconciliation account index. Only resources that you have reconcile against will have entries in the account index.
sbr

Uploaded file not shown

I have uploaded pdf file to files.acrobat.com (89Mb), but it is not shown in list of uploaded files (no errors). I tried it several times.

Hm, it's getting more and more tricky...
From stack trace I figured out the Macromedia driver ColdFusion seems to be using when I just select "Sybase" as driver type, so I configured it using "other" as type:
JDBC URL: jdbc:sybase:Tds:<servername>:1433/<dbname>
Driver Class: macromedia.jdbc.sybase.SybaseDriver
For comparison, I used the following parameter to configure it for the Sybase provided JDBC driver:
JDBC URL: jdbc:sybase:Tds:<servername>:1433/<dbname>
Driver Class: com.sybase.jdbc4.jdbc.SybDriver
To my surprise, the Macromedia driver still does NOT work with cfqueryparam, I got the same error!
As I mentioned before, I cannot select "Sybase" as driver type on our production server because it's Standard Edition, so the only option for me to use Sybase is to configure the driver this way. Now it seems no matter what driver I use, as long as the driver is configured this way, INSERT won't work with CFQUERYPARAM?!
Needless to say, I'm really quite frustrated by this...

Pdf files not shown

When trying to open PDF files in Safari 6 are not shown. It shows a gray screen. What do I do to view these PDF files directly in Safari?

Try:
*[/questions/816793]

PSE 8 catalog in custom location not shown in catalog list

I am trying to help a client recover from a computer problem. She was having several types of problems with her PC a couple of months ago. PSE 8 seemed to be working ok at the time, and my memory tells me I Reconnected all missing files (if there were any), Repaired and Optimized, as is my usual practice. I then did a full backup to an external drive. She then had her son fix her computer in some way shape or form. He lives out of state. I got a call and she said she was ready for me to get her PSE 8 back up and running.
When I got there, we discovered she did not have the PSE 8 CDs. She he bought it online from Adobe but never copied it to a CD etc. We decided she would buy PSE 10 and download it. I had never downloaded any from the Adobe Store and was totally shocked to discover it was a three hour download. Other equally large files I have downloaded from Adobe would have taken 20-30 min. While it was downloading I even went hoe and started the download on my internet connection. It would have taken an equal amount of time. Sorry, I strayed.
After we installed PSE 10, I did a Restore from the PSE 8 backup I made a couple of months ago. I have done this many times over the years with very good results. We got a message saying the catalog was successfully restored. But when I went to convert it to PSE 10, an error appeared saying the conversion failed and we shoulf try restoring it on to PSE 8 and try abother Backup.
That's the background. I do still have PSE 8 on a PC at home. I restored the Catalog to a custonm location (a second internal drive). All of the 5300 pictures or visible, tags appear to be in order etc.
But before trying a Back-up I wanted to Repair and Opimize the Catalog (named my Catalog). But with the catalog visible, the area where I expected to see [Current] is blank, and the Repair etc buttons are grayed out. I'm stumped. The only think I can think to do is to back another backup and try to restore that one on her PSE 10 after I dry run it at home.
I'f attached a screen shot showing the dialog box in quesation. I now see where it is quite small, you should be able to see the areas of the screen I'm referring to.
I'm stumped. Any suggestions will be very much appreciated.
TIA

Brett,
Thanks for the quick reply. It seemed like a simple solution, but it did not work. Going up one level did not change anything. The area is still blank and the choices are still grayed out.
Can you think of anything else?

PAT file not shown in Support package manager

Hi All,
We had to create a custom BAPI to achieve an functionality in our product.
We are doing this for the first time.
As a standard procedure we followed the AAK (Assembly Add On ) toolkit to create the deploy-able.
Finally in the consolidation system we could see the following PAT file created in the out directory.
QA70020777848_0000002.PAT
I copied the file to the in directory of the production SAP server where this needs to be deployed.
I ran the transaction SPAM on the server.
Load packages from Application server
QA70020777848_0000002.PAT SAPK-170COINCOMPANY1 @EB\QUpload Already Occurred@ 0004 OCS file already exists in inbox. Upload not required.
IT decompresses the file properly.
Now the problem occurs ahead.
IF i click on the New Support package nothing is shown visible .
Am i missing any steps here.
Regards
Manoj

Got the solution in fact it's not a solution it's just an awareness on how the disks are available in fail-over cluster manager.
1) All the available disks are shown in fail-over cluster manager "storage".
2) While installation it asks us to add available disks for SQL Server then add accordingly. (Ex: E:drive for data files and L:drive for Log files)
3) Once the installation is done you see those disks in MSSQL (SQL Server) group.
Means when you click on Active node it should show you MSSQL (SQL Server) group in which you can find network name, network ip, E: & L: Drives, SQL Server and Agent services.
Note: MSDTC and Quorum are also clustered disks which can reside (Preferably Active Node) in any of the nodes but automatically fail-overs to active node in case of any passive node failures.
Regards,
Kalyan
Grateful to your time and support. Regards, Shiva

Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

GIF files not shown ? how to find duplicates ?

I have Photoshop Album Starter Edition (PSASE 3.0)
1) PSE is not showing GIF images, it shows only JPG
It only searches for images in MyPictures, but I have images in many other folders also.
2) I would like to find dupes, how do I proceed ?

PSASE detects duplicates automatically when you are importing images. The images that are already imported and are present in the catalog are reported as duplicates and are not imported again.
Also, PSASE plays files of most common video formats. Please let us know the filename extensions of the video files you are trying to play.
~Vibha~

3D file not shown in PDF portfolio

I created a 3D pdf, and the model shows up fine in this file. But when I insert this pdf into a PDF portfolio (using Acrobat X), it resuls in a blank file with nothing visible?! How can I fix this problem?

In Acrobat X there is only one way to create a 3D PDF file, so without know your workflow it's difficult to comment.
The cards in Acrobat X PDF Portfolios never show activated Rich Media content, only the poster image for the annotation. If there's no poster image, you will just see a blank space - the thing you see on the card isn't the PDF at all, it's an image snapshot rendered from the PDF, as is used to display the page thumbnails on the left sidebar.
In Acrobat X, double-clicking on a card in layout mode will open the preview mode of the same card (bigger card against a black background, but still showing just the snapshot image). Double-clicking on that preview will finally open the file, or you can right-click on the card in layout mode to get there a bit faster. With the standard Acrobat X Portfolio layouts, interactive content, forms, etc. will only activate when the PDF is running in its own window, and not when it's being displayed as part of the Portfolio. In Acrobat 9, we didn't have preview mode, so double-clicking on a card in layout mode did actually open the file and activate the content straight away, in the same window (with the black Portfolio toolbar along the top to take you back to layout mode). In Acrobat X it doesn't.

DVD files not shown in DVD folder

Hi.
Some DVDs will not display as DVDs when inserted. Insted of the circular DVD icon, the icon displayed on the desktop is a folder icon with a red minus sign on it. The DVDs play normally when opened in DVD player, but in Finder the folder appears completely blank. These are DVDs of my work and it's frustrating because I can't access files within it in order to isolate certain clips. Other DVDs burnt at the same facilities place don't have this problem.
Any ideas? Thanks.
15" 1.67GHz PowerPC G4 Mac OS X (10.4.5)
15" 1.67GHz PowerPC G4 Mac OS X (10.4.5)
15" 1.67GHz PowerPC G4 Mac OS X (10.4.5)

Hi, dushman!
You might try running Repair Permissions and see if it helps. Also, see if the icon will allow a Get Info and see what the ownership/permissions are. It's a permissions issue...
Gary

Encore for Windows: "additional files" not shown in Mac

Hi!
I'm developing the authoring of a DVD using Encore (legal) CS4 for Windows. In the DVD there will be additional files (some PDF) that are correctly burned to the DVD with Encore. The resulting DVD has two folders: "FIles" and "TS_VIDEO".
In Windows I can perfectly read the PDF files under the Files folder, but in Mac, this folder appears, but it's empty.In both systems the DVD part (menus and movies) works fine.
Any help would be very appreciated!
Regards from Spain!

Welcome to the forum.
It sounds as though the Mac is not seeing the ROM Content on your disc. I wonder if the file naming convention (most often, the file extensions are not used on the Mac, but a "finder" file is used instead) is getting in the way. As I am a dyed-in-the-wool PC-user, I cannot tell you what the Mac-fix will be, but I will bet that Mac users, who do ROM content can.
It might well be that rather than use Encore for the full production, including the ROM Content, you will need to do the authoring in Encore, Burn to Folder, construct the folder with both Mac & PC content (maybe two different folders?), and then use a program like the great, free burning utility, ImgBurn, to burn the VIDEO_TS folder (and files), and then the ROM content.
This is just a guess, but I've had content on discs disappear if I have MacDrive (a PC utility for reading and using Mac content) running and insert a PC DVD/CD. I would guess that similar might happen with PC ROM Content and it's viewed on a Mac.
Good luck, and hope that a Mac user will chime in to tell us if I am correct, or totally wrong.
Hunt

MetaData in file not shown in Illustrator cs6 file info panel

I have a command line application that puts meta-data into files. It was created using the 5.1.2 xmp toolkit. The metadata is in the file. I can see it if I just use TextEdit to look at the file. I can also see the custom metadata in the Illustrator CS5 File Info Panel AND the Photoshop CS6 File Info Panel. The information doesn't show up in the Illustrator CS6 file info panel. Any clue why?

The files I am testing with are .jpg's. They ultimately need to be opened with Illustrator which is why I posted. I only tested with Photoshop to see what would happen and was pretty surprised to see the data there. Like I said, it works in CS5 Illustrator, CS6 Photoshop, but the data just doesn't show up in the CS6 Illustrator (in the advanced nor the raw tab), and when I view the .jpg with textedit the data is difinitely there. Pretty weird.

Invisible Files Not Shown By Finder

When I plug in my USB stick to delete some files on it, they seem to be gone afterwards, using Finder as my file browser. When I plug in the same stick in a PC, I see that the files are still there, starting with
For example: ._letter
On my mac, these files are invisible. Is there a way to see them? And how do I delete the whole file?

Thank you, it worked.
What are those "leftovers"? Why do they exist?
Now, I have got about thirty of them on my desktop. Can I delete them with no worries? Does it make sense to delete them at all?
I figure they take up a big part of my HD. True
Edit: If I try to delete them on my USB stick, an "unexspected error" occurs. How do I get rid of all this ... "trash"? Deleting this sort of file on my desktop, however, is no problem. How come?

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Files not shown in Catalog

Similar Messages

Maybe you are looking for