Files not supported error with Sorenson Squeeze 4

I'm trying to create flv. files for a video art site on the web. I have tried importing Sorenson 3 mov files, mpeg4 and mpeg2 files and simple QT files, thye all say "files not supported" after the compression says complete, and they won't play. What am I doing wrong? How shoudl I export my final cut pro movies so Squeeze will compress them? Secondly, there are a huge number of choices under flash, which should I be selecting?

I'm trying to create flv. files for a video art site
on the web. I have tried importing Sorenson 3 mov
files, mpeg4 and mpeg2 files and simple QT files,
thye all say "files not supported" after the
compression says complete, and they won't play. What
Huh? Who are they? You mean, Final Cut Pro? Is Quick Time Player selected in 'External Editors' under Final Cut Pro's 'System Settings'?
am I doing wrong? How shoudl I export my final cut
pro movies so Squeeze will compress them? Secondly,
You mean, Sorenson Squeeze 4?
there are a huge number of choices under flash, which
should I be selecting?
Sorry to say, but if you are familar with video compression, those settings are pretty much basic, and I don't know exactly what to explain to you.
iMac G5 2GHz Mac OS X (10.4.3) 1,536 MB RAM
iMac G5 2GHz Mac OS X (10.4.3) 1,536 MB RAM
iMac G5 2GHz Mac OS X (10.4.3) 1,536 MB RAM

Similar Messages

E3000 shows "USB is not supported" error with External Harddrive

I have the E3000 router and recently purchased a USB WD (Western Digital) 2TB External Harddrive. I plug the Harddrive into the router, open the router homepage (http://192.168.1.1/) then click on Storage > Disk and I get a "The attached USB is not supported" error - any suggestions on how to fix this?
Thanks for any help!
Solved!
Go to Solution.

Likely Final Update: WD Support sent me a link to download / install SmartWare and solve the problem I was having with the SmartWare software ("Drive Settings" was greyed out). Once I got SmartWare back up and running I was able to change the "Drive Settings" within SmartWare. As the last update suggested, I modified the sleep timer settings and security (password settings) and tested to get the following results:
Sleep Timer on / Password protection on: E3000 shows "USB not supported"
Sleep Timer off / Password protection on: E3000 shows "USB not supported"
Sleep Timer on / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
Sleep Timer off / Password protection off: WD Hard Drive seen and seems to function properly when connected to E3000
So (other than maybe some inital problems with the WD SmartWare) it appears the "USB is not supported" error is due to the Password protection being turned on for the External Hard Drive. This point should be highlighted in the Western Hard Drive materials but I don't see it anywhere on the box or in the manual (maybe its fine print in the manual). Cisco and / or Western Digital are screwing us by not allowing password protection (or making this point known) on at this least model of Hard Drive!
Thanks again to everyone that helped with troubleshooting this!

Getting a file not found error with jam pack instruments

Since Logic Express no longer works with the current Mac OS X versions, I'm trying to get used to using GarageBand again while I save up to buy the full Logic Package. I had purchased all of the jam packs years ago and recently also purchased Main Stage. Now, when I go to use, for example, an instrument from the Orchestral jam pack, I get a message saying "EXS24 instrument “Cellos.exs”: Audio file “VC-L_legato_f_C2.wav” not found!" with the option to continue or search again. Clicking "search again" always ends up with the same message. This is driving me nuts! Pretty ****** off right now that I can't use what I paid money for. Isn't this stuff supposed to "just work"? Or did that die with Steve Jobs?

same Problem: Working with OS X 10.6.8 on a MacBookPro Santa Rosa and Logic Pro: Its not possible to use the cello.exs 'cos missing audio file “VC-L_legato_f_C2.wav”, same problem with Basses.exs (missing KB-L_legato_f_A#1.wav) and the Piano. All this broken Instruments are from the Jam pack Orchestra Library.

File Not Found Error with FlashHelp

When I deploy and launch my FlashHelp project I get a "Not
Found The requested resource was not found." error in the topic
pane. I'm also not able to reference any of the topics from the TOC
and get the same error.
I just upgraded to RoboHelp v6 and all of this worked fine
when the project was generated using the previous version of
RoboHelp (5).
Does anyone know what changed that might be causing the
problem?

Hello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim

File not found error with log4j.properties

Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.I have to use log4j-1.2.7 supplied by client with my application.I cannot write ant script manually.Also I cannot change server start script or cannot put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties in the same path where my EJB's are.But the final ear produced does not contain this log4j.properties and subsequently I get the error "log4j:ERROR Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes with the final .ear file and the ejb code finds the logger.
thanks,
pratim

Hello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim

Just upgraded to Lion and can no longer import any .mov files ("file not supported") to 3.1.3. Also can no longer view any .mov or .mp4 files already in library.

Have been using Aperture 3.1.3 with no problems. Importing from a Nikon D80 (RAW & JPEG), Casio (.MOV) and Flip (.mp4). Could import and view all videos without issue prior to Lion upgrade. After Lion installation, can no longer import .mov files (get "file not supported" error) or even view any .mov or .mp4 files currently in library (even though thumbnail is present). Can watch the .mov files directly on my camera using Quicktime in Finder but can't even drag & drop that file into Aperture. Anybody else having similar problems?

Still no resolution and Geniuses at store could not assist. Unfortunately, it looks like not all the applications were ready to support the Lion operating system. We could not import any .mov files, could no longer view any .mov files already in my Aperture library and could not email any .mov files. Totally frustrated. Use Aperture almost daily and can't lose the video functionality. Was also running dog-slow. Constantly looking at the spinning wheel. Geniuses suggested that I wipe out hard drive and reinstall Snow Leopard. Had full backup on external drive with Time Machine.
Not an easy process though...had to reinstall several times (at 5 hours each time) because I continued to have issues. Finally figured out that I needed to delete every backup file from Time Machine on external drive from the date I installed Lion because some of the hidden files were still migrating back to Snow Leopard.
I had to:
1. Delete all time machine backup files from date/time of Lion installation forward
2. Do "clean" installation of Snow Leopard (wiped hard drive using disk utility and booted with Snow Leopard disc)
3. Chose option to reinstall from backup off Time Machine which eventually got me back to Snow Leopard desktop
4. Deleted Aperture program and reinstalled (I had to install Aperture 2 and then install Aperture 3 upgrade.
5. Reinstalled iLife apps
5. Applied all Apple updates available (again this took a few hours because there were several updates from Snow Leopard's original release plus Aperture 3 and other application updates)
Still doing some tweaking on some of my other apps but got everything back to where I originally was. Now plan to wait on a few version updates from Lion before reinstalling.
I am one of Apple's biggest fans, but was very disappointed in the fact that I lost functionality in one of their own pieces of software (which I use the most!) by installing Lion.

Tried Most Everything... Error Type of file not supported... codec not installed

Hi Friends: I have been battling with the error message of ... "Type of file not support or codec not installed." I have been throughout the forums searching for answers and attempting various suggestions. I am stumped and am reaching out for some wisdom and help.
1.)    System Gateway – T-6859u, Intel Core 2 Duo T6400 2Ghz, 4 Gig ram, Problem has existed on both Vista and upgraded Windows 7. I have used Premiere since Premier 5 (Full version not elements) including versions 6 and PRO. I have Elements on my laptop for convenience.
2.)    Assets- Problem exists with all AVI files. This includes files that worked previously but will no longer be recognized. I have used Elements since version 7 was new. It is only the last 4 months this has been and issue. These are AVIs that previously working in Elements 7 from Panasonic DV camera and other DV sources.
3.)    Problem first appeared when Windows Update installed security patch KB975560. Once the Security patch installed Premiere quit running AVIs. When the patch was removed Premiere worked again. However, windows update continued to reload the patch. The patch has now been removed and prevented from reloading. However, the problem now persists.
4.)    Other attempted repairs. Reloading Premiere Elements 7, Upgrading to Windows 7, Removing and reinstalling K-Lite Codec packs inc standard and 64bit. Loading LEADTOOLS. None has repaired the problem All the AVI files playback fine in other programs including Windows Movie Maker, Media Player Classic, WM player etc.
I'm not sure what to do next. I have been a dedicated Premiere user for so many years, I don't want to switch to another program. Any suggestions friends?
DrMark1105

Welcome to the forum.
What version of Apple's QT Player do you have installed?
PrE relies on this much more than its big-brother, PrPro, until CS5.
From my experience, QT 7.5.5 was my "last known good," and some problems have been reported with the 7.6.2 and 7.6.3 versions. 7.6.6 is out, and works well for many Adobe users.
I would investigate updating QT Player.
Also, FFDShow, an element in K-Lite has been death to PrPro for many people. Just having it installed brings PrPro to its knees.
Though Adobe hides its CODEC's pretty well, K-Lite has been known to shift the priority of the Adobe MainConcept CODEC's. While it does not overwrite them, or delete them, it sets up some of its CODEC's to take priority. There are some older threads on Registry editing and utilities to reset the priority of the Adobe MainConcept CODEC's. Seems that Robert Johnson participated in those discussions and may have furnished the link to at least one utility.
Those are all the thoughts that I have now, and none might be of use.
Good luck,
Hunt
PS - Robert has not been around here lately, but does spend time on the Muvipix Community forum. I'd post there in the PrE 7 forum, and ask if anyone has any ideas too.

Getting an error "file not supported/necessary componant not installed

Any help on a error im getting, file not supported/necessary componant not installed

Jesse,
From what you have described for Test 1, 2, and 3, I get the impression that you are OK with a new project, but that your are having problems with these saved projects.
At this point, I think it important for you to keep a log of the project details to avoid confusion.
Test #3.
I am going to start with that Test 3 that was a new project, but almost successful (made it to about the 93% mark before transcoding error set in). I suspect that different factors are involved here than what brought you to the forum. Focus Step 12 in Test #3 where you said that you edited the movie line. How did you edit..added transitions, effects, titles, other? What was the length of the Timeline content? What DVD menu template did you use (how many main menu pages and how many scene menu pages)? When you went to Share/Disc/Disc and the burn dialog there, what did it say in the Quality Area of the burn dialog for Space Required and Bitrate? Also, at this time what did your computer show for available RAM and free hard drive space? Where were your scratch files (Edit Menu/Preferences/Scratch Disks) directed and did that drive have enough free space to meet the task?
Test #1.
Your success with this new project was expected. It would be nice to know what kind of .avi that you used, but, whatever they were, they worked to give you your DVD-VIDEO. What was the length of the Timeline content. What DVD menu template did you use (how many main menu pages and how many scene menu pages)? And, I am correct in assuming that this was an independant project...different source media and edits than # 3?
Test #2.
Here I believe is the true issue that brought you here.
When you say "Open existing project", it this the project from Test #1 which you closed and saved? Or, is it another existing project?
If you are not doing so now, please do Test #2 using the saved project prel from Test #1.
Now, I would like you to open Premiere Elements 4, in the Welcome Screen select the "Open Project" Folder, in the dialog that opens click on the Test #1.prel. The project should load, and you should find yourself in the program's Edit workspace. OK, so far? If so, what do you do next?
I was slow in typing again, so I hope that I am not out of sync with other messages between you and Hunt.
ATR

Problems with cached previews and File Not Found errors in preview and build

I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.

Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both.

Canon hf11 error file not supported in cs4

I have the Canon HF11. I have tried to import avchd files via the media browser and get the error message: files not supported. I have upgraded to 4.01. The files can import successfully into IMovie 09. I originally had the trial version installed, but I have uninstalled it via the uninstaller, and have installed the retail version. Could this be causing the problem? If so, any solutions would be appreciated.
Thanks.
Rhonda

I uninstalled cs4 and downloaded the cleanup script. The program found the cs4 installation, but no files were listed to clean-up. The right bottom box was grayed-out.

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

"File Not Supported" Message when importing AVCHD footage into Premiere on Mac

Hi,
What I am using:
Camera: Sony FS100
Media Codec: AVCHD
Computer: iMac running OSX 10.8.2
Premiere CS6
I have a quirky issue I have been trying to figure out. I just bought a Sony FS100 camera which records footage in the AVCHD format. When I import the "private" folder the camera creates into Premiere, it brings the footage in but always give me this error message: "File format not supported" along with a list of every clip on the card. The thing is, despite the warning, Premiere brings in each clip fine into browser window. I can preview the clips, edit them and export them out of the timeline with no problems that I have seen. Additionally, if I go back to the "File" dropdown and select "Import Recent File", I can select any of the the files individually again and NOT get the error message when I bring in the clips. I have imported from the Private folder amd the AVCHD quicktime inside the Private folder and, when I do, I get the above mentioned error. But if I import any of the .mts folders that Premiere can see inside the AVCHD folder (each .mts folder seems to represent each indvidual clip), they come in perfect without the error message. Additionally, if I locate the folder through the media browser, it brings the clips in without the error message. I can then drag these clips into the Project window like I have been trying to do eith the "import" function. So should I not be using the "Import" function with these files? I want to because that is what I did with FCP? Any help would be much appreciated!

The PRIVATE folder contains far more than just the media. Those additional files are what's generated the message.
The proper method here is to use the Media Browser for importing.

Files not supported error with Sorenson Squeeze 4

Similar Messages

Maybe you are looking for