Files not yet been created at Target side
Hi,
Scenario is IDOC to 4 files. (Multimapping)
My scenario is working fine and got the successfull messages in Moni and checked all the 4 messages received properly.
But, when i go to the target directory there the Files not yet been created.
I have created 4 Receiver Agreements and 've used for File Content Conversion for my Target directory and the file name is "xxxx.dat" format for each receiver file.
For Content conversion :
Recordset Structure : Raj
Raj.fieldSeparator : 'nl'
Raj.endSeparator : 'nl'
Could you please let me know why the files not created at receiver end.
Regards,
Y.Raj.
Hi,
First of all i would say thanks to all of you for your valuable replies...
Finally am getting the files at receiver end. But, i don't know why the reason
when am trying to resend the inbound payload from RWB the message getting succesfully in MONI. But there was no files.
But, when i trigger the IDOC from R/3 then the files been created at target.
Thanks & Regards,
Y.Raj.
Similar Messages
-
I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
ThanksCan you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N -
The accounting document has not yet been created Message no. VF062
hiii
Iam getting error in VF02.
Error is The accounting document has not yet been created
Message no. VF062
And where i can do it ?hi
Go to VF02
Open the billing document
Enviornment -- Acc. determination analysis -- Revenue accounts and see why the accounting document is not generated
Also, from VFX3 and select the document and release the same by clicking on FLAG and then to know the cause of
Error
TO know cause GOTO Tab --- NOTE and u will get the error cause
let us know the cause then only we can be able to tell exact solution if possible. -
The accounting document has not yet been created
Dear All,
Account document has not created after Billing document creation.
Unable to clear this billing document with payment. What could be the reason?
Expecting valuable guidelines.
Regards,
GBHi,
I hv tried thro' VF02 - Release to Accounting and the following error msg is showing :
Posting date / period 07.10.2009/007 is earlier than existing date / period 14.10.2009/007.
What is this existing date / period date. How do I will check thro' Sale Order.
Expecting few more guidelines!!
Regards,
GB -
I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In". The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue. Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue.. Stuck...The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here: ~/Library/Cookies
Click Go the move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the App Store. -
I am unable to play games on my 4S. I keep getting this Apple ID has not yet been used in Game Center, I can't even create a new account....nothing I try seems to work.
Try start a game with Game Center feature and create a account this way.
-
Error in Transport- has not yet been imported successfully in target system
Hi Folks,
I'm facing a problem with the transport of a workflow : it 's creating following error :
Diagnosis: The object R3TR SOBJ ZYBUS2000 has not yet been imported without error.
System response
Import post-processing is not performed for this object.
Procedure
Examine the import log for this transport request for error messages.
Repeat the import after removing the cause of the errors.
How can I solve this ? could you please suggest me.
thanks in advance !
Regards,
NareshHi,
Check the transport log of the request and the long text where you can find the detailed descrition of the error. Change the BOR accordingly. Check the syntax of the BOR object ZYBUS2000 regenrate , activate it and retransport.
Regards,
Vaishali. -
I have created an Apple ID yesterday and I could not use App store that shows a message when I try to install something that "This Apple ID has not yet been used in the iTunes Store". What should I do?
Try this support article > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
-
I created an apple id and tried to authorize my computer but it says that this apple id has not yet been used with the itunes store, why?
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
The request has not yet been updated into the data targets.
Request successfully loaded into PSA - start further update
Diagnosis
The request has as data target "only PSA". It arrived there successfully.
System Response
The request has not yet been updated into the data targets.
Procedure
You can now trigger the update manually. The final target is determined in the request tables. You do not have to make any further settings.
I am getting this error daily. In RSMO screen status tab option called u201CProcess manuallyu201D, so am doing this manually daily. Is there any solution to fix this problem permanently?
Thanks & Regards,
Praveen Yagnamurthy.Hi Praveen,
Dont you have Process chains in Production system for loading thid data. If so its better to schedule the PC rather go for manual loading. In Prod system you will not be able to change. You will have the make the changes in the Development Environment & collect these changes in a TR & then move them into Test environment first to make sure it is working fine. And then once it is tested, you can move the TR to Prod sys.
Hope it helps!
Regards,
Pavan -
i have creat new apple id when i sign in 1st time this will say this apple id has not yet been used in itunes store? please help
I changed my dads password, then went back to sync my apps and when it came to the Authorization, I entered his account name and the new password (which was by the way accepted and changed correctly) to have it come up on the screen as the incorrect password...REALLY!!! I went back and changed the password again...guess what? Same result "inncorect password".
As I mentioned my dad PASSED AWAY, there is no way I can ask him what his password originally was, i can't accesses his email account as it no longer exists.
What am I supposed to do, this is very frustrating.
If I use my new account that's in my name, the Authorization screen just keeps asking for my Dads account. -
please helpp!
A Google search reveals many discussions of this issue on this forum: This Apple ID has not yet been used...
-
Last online backup have not yet been archived using BRARCHIVE
HI,
When I hit the T Code db12, it shows me that The redo log files created during the last online backup have not yet been archived using BRARCHIVE, They are needed for a complete recovery.
What should I do to archive those files? Please suggest.
Regards,
RajeshRajesh, use Fidel's answer, it is the best one. his solution backs up the database and all needed redolog files for a full recovery.
for BRARCHIVE, use:
brarchive -u / -c -sd
you might need to adapt init[SID].sap file accordingly. -
RUn time error while saving po Field symbol has not yet been assigned.
Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 106).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"SAPLKKBL" or "LKKBLF99"
"GEN_FIELD_OUT2"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 2908
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878 else.
2879 assign <fs11> to <field>.
2880 gs_fc = gs_sfc11.
2881 endif.
2882 when 012.
2883 if gs_out_flags-slave ne 'X'.
2884 assign <fm12> to <field>.
2885 gs_fc = gs_mfc12.
2886 else.
2887 assign <fs12> to <field>.
2888 gs_fc = gs_sfc12.
2889 endif.
2890 when 013.
2891 if gs_out_flags-slave ne 'X'.
2892 assign <fm13> to <field>.
2893 gs_fc = gs_mfc13.
2894 else.
2895 assign <fs13> to <field>.
2896 gs_fc = gs_sfc13.
2897 endif.
2898 when 014.
2899 if gs_out_flags-slave ne 'X'.Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj -
Apple Account has not yet been used in the itunes store
Hello,
Not to long ago i had created a apple account on the Web, Now that i have an ipad am trying to download an app but when i log into my apply iD it says "Apple id has not yet been used in the itunes store."
So Then when i click Review.
They want me to put a credit card # and stuff but i don't wanna put them is there any hope ?If you ever intend to purchase anything in iTunes, say a song, a magazine, a book, etc., you need to put a credit card on file. It's safe and secure and millions of us buy things via iTunes daily.
If you only intend to download free apps and will never buy anything, there is a way to create a credit card free account. But, I'd put the credit card on file so you're not limited in what you can with iPad.
How to create an iTunes account without a credit card: http://support.apple.com/kb/ht2534 (Click on related Subjects for more information)
Maybe you are looking for
-
I am running xp service pack 3 i have trie adobe reader xi i am now running reader x i have rel;oaded driver restarted comp-uter and reloaded reader please help have also tried to use it unprotected and that didnt work
-
(All Choices) is not working in dashboard prompt
Hi, I created a dashboard prompt with Drop-down list control using SQL Results. Now, when I execute it, I noticed that when (All Choices) is selected in the drop-down list, it doesn't work but if a particular item is selected, it is working fine.. He
-
Is there any option to run FBRA in background mode or suggest some idea.
-
Releasing Licenses Crystal Reports 2008
We are considering to migrate our infrastructure to Crystal Reports Server 2008. We have setup a test server with 5 CAL, and in order to make our reports work here, we had to modify our code slightly to use a different viewer (Interactive viewer is
-
Dear developers, Greetings!! As, I have selected command processor and console window from the catalog item that is necessary to run the command prompt on the WinCE platform. But, when I run the command prompt I got the following error : CMD Error