Files open as empty in Dreamweaver, but still normal on site

I connected to my website and attempted to work on a file on my remote server (the actual site server) and when I opened it there was NO CODE AT ALL. When I logged into the actual site, the file functioned normally and when I went to the file manager on the actual site, the file was perfectly fine. Please help!
Hank

Hi Hank -
I didn't realize you could edit a file ON THE SERVER without a CMS of some sort.
Could you post a link to your site so someone with CS6 could check it out for you.

Similar Messages

My ipod 160g has a memory but says no files except 4 standard games, resets but still no files, Can anyone please help?

my ipod 160g has a memory but says no files except 4 standard games, resets but still no files, Can anyone please help?

What is displayed for the different types of storage (such as Music, Movies, Other, etc) under Settings -> About?
B-rock

How to make extensionless files open as PHP in Dreamweaver

I currently have some files that do not have any file
extension. For example, my file would be "test" instead of
"test.php". Is there a way to tell dreamweaver to open an
extensionless file, by default, as a php file? Right now it just
opens it up as a plain txt file. I was looking through the config
xml files for dreamweaver, but didn't want to break anything.
Thanks in advance,
Jesse

On 02 Apr 2008 in macromedia.dreamweaver, Michael Hager
wrote:
> you can't get browsers to open files without the proper
extension.
Sure you can, at least with an Apache server:
http://httpd.apache.org/docs/1.3/content-negotiation.html
I recently found out that Apache on Debian comes with it
enabled, so that
if the filename on the server is foo.php, you can surf to
http://example.com/foo, and the
file will come up.
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

Can i unpublish my site form .mac but still keep my site/pages in iweb?

i am sick of errors, etc... so i have purchased ouside hosting. i want to use my idisk space to back up my files. how do i get the site i published before off of there (to free up more space) but still keep all of my website work in iweb???
thanks!

What you want to do is to delete your sitefolders from your iDisk. Just go into your iDisk and delete the "Web" folder that you see in the root directory. As you are deleting the files, you may get some error messages about permissions or privileges...disregard these and just continue with the process. This should clear out your iDisk space used by iWeb.

Trying to open a saved down idml file in CS4. Updated CS4 but still missing plugins?

I'm trying to open both an inx file as well as an idml file exported from CS5. I have CS4 and it is updated as far as it will go, but it still says I'm missing plugins. And a lot too... 19 of them! Does anyone know how I can get these plugins? It's requesting them for both the inx file and the idml file.

That is indicative of someone simply renaming an INDD file to IDML. In other words, that file wasn’t EXPORTED from anything. It was saved with a different extension or renamed after saving.
Bob

A user uploads a new pdf (using Dreamweaver) but still gets the old version back in browser.

She downloads the file from the site, and gets the old version of the file instead of the one she just uploaded. I tried it myself and everything is done correctly: the new file is on the server but download keeps displaying the old version. Dreamweaver ticks off the bytes as they are going upstream. I can RDP to the server and see that the newer version is there (by datetime stamp). She is using IE 8 if relevant.
This only happens with pdf, no caching is turned on in IIS6 - all content updates are instant.
I have gone in to the temp internet files and deleted the cached version of the file and emptied the trash (Win XP) but it still serves the old version.
This issue has been reported by other users, but I thought it was user error until it was staring me in the face.
My final verification was to upload the new document with a new name, delete the old document, and rename the new name to the old name - after that it delivered the new document
How do I tell the (non-tech) user fix this?
I've seen references to this on other sites (now that I know it is real, I dug deeper) but the solutions proposed mostly seem to involve changing the query string by adding somthing to the end of it.
This is out of reach of my user.
I can't be the first person to encounter this right?
And note that I went into the server... the document was uploaded, and IIS caching is off.
I was told by someone here (and I can't reproduce it in my office) that I should tell the user to go to Adobe Reader | Edit | Preferences | Internet.
Then tell her to uncheck all three boxes (display in browser, allow fast, and allow speculative)
But I don't see how that would fix it - remember that I deleted the pdf from the internet cache and that didn't solve it.
Thanks,
-Chris C. 1972

I've faced this before too.
I've tried many different approaches but the most reliable way I've ever found of handling it is to rename the new PDF each time (e.g. adding the revision date into the filename) and update the link in the web page to point to the renamed PDF.
Works every time.
Chris C. 1972 wrote:
I was told by someone here (and I can't reproduce it in my office) that I should tell the user to go to Adobe Reader | Edit | Preferences | Internet.
Then tell her to uncheck all three boxes (display in browser, allow fast, and allow speculative)
But I don't see how that would fix it
Nor me.

PDF files opens in Adobe Reader 9 but not Adobe Acrobat Pro 9

After one of my users digitally signs a PDF file, and saves it, he cannot open it again.
He gets either a reference memory error or a Font Capture error.
I can open the same PDF file with Adobe Reader 9 and Adobe Acrobat Pro 8.
If I take the same file to a system with Adobe Acrobat Pro 9 - same error on the same file.
Happens to my administrator account as well.
Acrobat Pro 9 version: 9.4.1
Adobe Reader version: 9.4.1
Acrobat Pro 8 version: 8.2.5
Windows XP SP3
IE 7
Acrobat Pro 9 has been completely uninstalled, the system rebooted, and the software reinstalled.
Customer's profile has been rebuilt.
The error message in the event log are:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 1/31/2011
Time: 12:56:02 PM
User: N/A
Computer: XXXXXXX
Description:
Application popup: Font Capture: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".
or
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 1/31/2011
Time: 1:13:06 PM
User: N/A
Computer: XXXXXXX
Description:
Application popup: Adobe Acrobat Pro: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".

So the option was already checked when opened the document. I went ahead and unchecked, closed, reopened just to test and it's still not displaying correctly.
In response to Bill@VT. The image is on top of a white background so I can't tell if there is space there or not, it's just all white.
She showed me another document that's doing something similar today. This time the pdf was done with a green background and now the background shows as white. It was created the same way with Indesign and it shows fine in Reader and the Windows preview pane just not Acrobat. I'm trying to get the user to find the installation media so I can remove and reinstall, but I'm not sure if she will be able to find it.

Music files not showing up...but still on ipod

So today i plugged in my ipod and itunes opened up and I immediately noticed that the music files were not able to be viewed, but the ipod still read that it had x number of files and x number of gb's used. Is it possible to recover my music files. I am still able to view my contacts. Anyone find a solution to this problem without restoring the iPod to factory specs?
Thanks,
dee

Try Senuti.
It's a program that transfers music from iPod to iTunes on a Mac.
There's also a similar program called Yamipod which has a Mac version.
I've used both these on a Mac with great success, but of course the iPod needs to be redable by your computer.

Quicktime DV file opens on Mac... but not PC.

Long story short, I'm using VirtualVTR to record DV files. I can open and play them with no problems at all on a Mac machine, but XP gets a -2048 error.
Until recently, I would get this error on a select few files... but now it's every file.
To confuse the issue more, if I take the file into Final Cut Pro 5.1.4 and simply export the file again... it works without fault.
FYI, the record hardware is an AJA Kona LH on a G5.

I'm quickly running out of ideas or answers.
I can't think of what FCP export does to the file that allows PC viewing.
Maybe the file wasn't properly "closed" during recording.
Mac's can read "incomplete" MPEG 1 and 2 files I don't if it's the same on a PC as I've never tried one.
What happens if you simply "Save As" using QuickTime Pro? That would put the DV file inside a .mov container but would also set the header info to the front of the file.
If that works it's much faster (nearly instantly) than a FCP export.

Exported File Opened in Quicktime looks bad, but looks fine in Final Cut

I'm working on a DV/NTSC sequence. Original footage captured from DV/NTSC, so there is no recompressing happening in the timeline. I've exported the sequence as a Quicktime Movie, using current settings, not recompressing all frames. I've also tried this exporting as a self contained movie, but get the same results.
Once the export is complete, I open the file in Quicktime, the quality is blurred and degraded compared to the canvas in Final Cut. I then open the same exact file in Final Cut and view it in the viewer, and the quality is perfect! I have no idea why this is happening. If I take my exported Quicktime file, and run it through Compressor to create different formats, they all produce the low quality, blurry results. Has anyone else experienced this? Any suggestions on how to get around this?
So far, the only fix I've found is to go into the sequence settings as select "None" for compressor instead of the default "DV/DVCPRO - NTSC" setting. The problem with this is that then the whole timeline has to be rendered. Once the rendering is complete, then I can export to Quicktime without any quality loss when viewing the file in the Quicktime Player.

From the menu bar:
*QuickTime Player* > Preferences > General > Use high-quality video settings when available.

Image file not visible in style library where it is situated but still visible in site

Hi all,
I'm a bit stumped by this one - there are a set of images that are part of my masterpage in my site, and they are "in" (according to the link/url) the "/style library\branding2010/images/..." folder, however when you GO to this folder,
these images are nowhere to be found... how is this possible?
Has this item been deployed incorrectly?
What is the correct way to (a) fix, (b) do this in future?
There is a "branding2010.wsp" file ON the server, there is also the "*.master page that refers to these "phantom" images appear fine even in SharePoint Designer, and while you CAN see them in the "Browse" for picture window
IN SharePoint Designer, you can't add edit or delete these things...
I don't know much about branding (or sharepoint really) but I'm "in charge" - I'm site collection admin, but I can't seem to "see it" using Sharepoint designer, Sharepoint "proper", or "View/Manage All Site Content".
Any help or guidance would be great!
UPDATE: Hmmm... in "All Files" (Sharepoint Designer) you CAN get to and manage these files... is this the recommended workflow?

Hi,
As you said that you can view the image files inside All Files in SharePoint Designer, so what is the image files’ location? Are they still inside the style library?
I suppose that the images may not be stored in the Style Library.
Please right click the file in SharePoint Designer and select Preview in Browser to check the URL of the images.
Per my knowledge, if the images are stored in the style library and you have permission to view or edit
the files, you can view or edit the files in the browser.
And you can also choose to edit the files in SharePoint Designer, both the two methods are supported.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Ipod appears empty on itunes, but still says 9GB used! pls help.

I connected my ipod to a friends computer, and it seems to have 'wiped' it. The ipod shows up in itunes, but there is no music on it. However, it says at the bottom (and in exlporer) that I have used 9GB, so I assume my music is still on it. No music shows up on the actual ipod either, but my photos are stil on it. I can't figure out whats happening!
I would be very grateful for help!
Thanks
video ipod Windows XP

I do not understand what "it says in the windows connect to itunes" means?
What is "it" and what is "windows"?
Maybe:
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

CS5, checked "save file extensions as small case letters" but still capital, why?

hi,
i installed CS5 4 weeks ago, since this time, i never got a file extension in small case letters, only capital letters ( xxx.TIF ). why?
i checked it in preferences, see enclosed screenshot... i never had this problem in CS4.
it would be important for myself, when saving files, that alle extensions are small case letters, like xxx.psd or xxx.eps
usually i rename these extensions manually, cause i am uploading final images to PC servers, which
cant recognize capital letters, i presume....

no, i am still dealing with this problem on both macs,
mac pro mid 2010 2,8 quad (24GB RAM) and my mbp 15" i7 (4GB RAM)
where i installed Photoshop CS5.
on both macs, photoshop always saves files with capital letter file extensions (xxx.TIF or xxx.PSD)
thats very annoying, as i have to manually rename the file in the finder later.
and thats for all files i create.
i really wonder, could anyone from the adobe staff please comment if it is a bug
or anything else?
thanks!

Flash player is latest version, but still blocked on sites

I am running flash player version 16.0.0.235, but every site i get to that needs flash, i get a notification that flash is blocked. how can i fix that??
I am running firefox 34.0.5 on Windows 7 x64 on a macbook pro using bootcamp

Type '''about:addons'''<Enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
On the left side of the page, select '''Plugins.'''
Make sure the plugins you want to use are set to '''Always''' or '''Ask.'''
Go to the web page. Once the page is loading, mouse to the address bar
and '''Left''' click the icon. A window for displaying site information should
come up. Select '''More Information.''' Now select '''Permissions.''' In the
menu, find and check the plugins, make sure they are set properly.

HT4479 I DID REDEEM WITH MY ID BUT STILL THEV WEB SITE ASKING THE REDEEM NUMBER FOR REGISTRATION

I did redeem with itune card into the itune store under my log in data but the web site still asking the the redeem number and giving that the redeem number I used is used before. my redeem number is :XXMP6KZK5FPLCTF6. please help.

Hello uncl@home,
Thanks for reaching out to us for assistance with unwanted texts on your device. After all, we're always here to help when you need us. I wanted to touch bases with you to see if the issue has been resolved. Just curious, are you getting unwanted texts from a 10-digit number? If so then you can have the texts blocked at www.vzw.com/spamcontrols. For all other unwanted texts, forwarding them to 7726 is the method to have them addressed. Let me know, just in case more options are needed.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Files open as empty in Dreamweaver, but still normal on site

Similar Messages

Maybe you are looking for