Files says it was created on a newer version of numbers? What now?

Im trying to open a numbers file.  It was created on my ipad and when I try to open it on my iMac (Lion) it says the file was created on a newer version, so it wont open.  What now? Do I have to upgrade my iWork?

I'm assuming you're using iWork '08. The iOS versions of the iWork apps are only compatible with iWork '09.
You can buy the individual apps on the Mac App Store. It costs less than the retail box & you can buy just what you need. Of course, you can often find the retail box for less on places such as Amazon.com or eBay.
Depending on how often you need to do this, you could save the file as Excel on the iPad & then open it in Numbers '08 on your Mac. Certainly not a process I'd recommend. The odds of the file not looking like you expect are even worse than just opening an iOS version in a Mac version.

Similar Messages

  • I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?

    I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Itunes told me i needed to re-install itunes, so i have but every time i click on itunes it comes up with "the file itunes library.itl cannot be read because it was created by a newer version of itunes" what do i do now?

    itunes tod me i needed to re-install it, so i did but everytime i click on itunes on my desktop it comes up with "the file itunes litbrary.itl cannot be read because it was created by a newer version of itunes" what do i do now?

    If you've already installed the latest version then the message may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
    tt2

  • HT2731 When I try to open Itunes, I get message cannot open this file because it was created by a newer version

    When I try to open itunes, I get message cannot open this file because it was created by a newer version
    CAn anyone help?

    Which system are you running (is this information correct in your profile)?
    Are there complicating issues to this question such as you transferring libraries between computers?
    Have you upgraded iTunes recently?
    Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311  - read section on Opening iTunes for information about running multiple copies of iTunes.

  • TS3212 I just installed iTunes (from the apple site) on to my new laptop.  When I click on the icon to open I get a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  Now what do I do and ho

    I just installed iTunes on my new laptop.  When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes".  I have no idea what this means or what to do about it.  I can't even find a file on my computer like the one referred to in the pop up.  I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes.  What should I do to fix this?

    What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
    Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.

  • Help can't open itunes, says it was created by a newer version of iTunes?

    Help! When I try to start iTunes it says: The File "iTunes Library.itl"; cannot be read because it was created by a newer version of iTunes.
    Today before the listed above happened it 1st said it detected an issues with Quicktime, so I followed the instructions to uninstall and installed Quicktime using the Quicktime standalone installer. Then when I tried to get to iTunes the above popped up instead.....please help me!! I'm not computer savvy and do not know what to do!

    Here is some advice I copied from a b noir (regular poster on these forums) message.
    I've seen that one reported every now and then after an version update, if the update hasn't gone through properly. (The library files seem to get updated, but the program files don't.)
    So, let's try another iTunes update, taking a few extra explicit precautions this time.
    Download and save a fresh copy of the installer to your hard drive. (Don't run the install on line.)
    Latest iTunes Installer
    Switch off antivirus and antispyware applications prior to the install.
    Now run the install by doubleclicking on the iTunesSetup.exe (installer) file you downloaded earlier.
    Does that install go through okay? If so, does iTunes launch without the error message this time?

  • My computer crashed and I had to re load my operation system. now itunes won't open. it says it was created by a newer version? what is that?

    my computer crashed and I had to re load my operation system. now, when I try to open my itunes all I get is a message that says "can not be read because itunes was created by a newer version" what does that mean and how do I correct it. I need my music back!

    As iTunes is uopgraded the newer versions require that the iTunes database be upgraded to match. It sounds like you now have an older version of the sftware attempting to load an upgraded library which it can't do.
    What version of OS X are you running?
    What version of iTunes are you currently running?
    What versions were you running when your system crashed?
    Allan

  • HT1926 just installed latest itunes to my pc, but now getting this message' the file itunes Library.itl cannot be read because it was created by a newer version of itunes. and now i cannot open itunes?

    just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • Screen Message"File iTines Library.itl cannot be read because it was created by a newer version of iTunes" What is this and how can it be fixed?

    Screen Message on P.C. "File "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.
    What is this and how can it be fixed, please?

    Problem solved by doing the following:
    Open PC/Mac and search for iTunes Library.
    From the list, select the most recent version of iTunes Library. Save this to a folder.
    Delete iTunes from your computer.
    Install latest version of iTunes.
    When I opened the new version of iTunes, everything was there as before.
    I didn't need to import the saved version of iTunes Library. Maybe this happens automatically?????

  • IPhoto won't open library, says it was created in a newer version

    Copied wife's home folder from her old MacBook (going to the kids) onto MacBookPro (going from me to her). Both machines running latest Lion with patchs and iPhoto version 8.X. When I open iPhoto on the MBP, it says "Cannot open library, it was created with a newer verison of iPhoto". Yet both the MB and MBP are runnign the same versions of iPhoto?
    Solutions?
    Should I buy latest iPhoto from the app store?
    Is the libary DB corrupt?
    thanks,
    There are 30Gb+ of photos (mostly of kids since birth) so domestic harmony demands a speedy solution
    BTW is there a limit on how large an iPhoto DB can be?

    Here is some advice I copied from a b noir (regular poster on these forums) message.
    I've seen that one reported every now and then after an version update, if the update hasn't gone through properly. (The library files seem to get updated, but the program files don't.)
    So, let's try another iTunes update, taking a few extra explicit precautions this time.
    Download and save a fresh copy of the installer to your hard drive. (Don't run the install on line.)
    Latest iTunes Installer
    Switch off antivirus and antispyware applications prior to the install.
    Now run the install by doubleclicking on the iTunesSetup.exe (installer) file you downloaded earlier.
    Does that install go through okay? If so, does iTunes launch without the error message this time?

  • I downloaded an older version of itunes and when i try to open it say it cant becouse it was created by a newer version of itunes what can i do to open it in ios 6

    please help

    The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
    In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    With iTunes 11.0.3 and later you can enable artwork in the Songs view from View > Show View Options (CTRL+J) making it more like the old Album List view
    View > Show View Options (CTRL+J) also contains options to change the sorting of grid based views
    N.b. iOS 7 requires iTunes 11.1 or later. Do not downgrade iTunes if you have already upgraded your devices... Roll back of iOS is not possible.
    If you feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
    See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
    tt2

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • HT1926 The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes."

    After uninstalling all iTunes program files as instructed, I reinstalled iTunes successfully, but now i have a new Error Message :The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes."  Now what?

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I do i access itunes if it says itunes cannot be read because it was created by a newer version of itunes

    i cannot access itunes cause it says it was created by a newer version of itunes but i cant update itunes cause i dont know how to get my administrator's username or password

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

  • Itunes wont open because itfile was created in a newer version?

    Hi all,
    I tried to download the new iphone software yesterday through itunes.
    It told me it was downloading a new version plus a new safari.
    It got half way through and the itunes part had a red X through it and didnt continue, instead it completed the safari one and once complete told me to restart my pc which i did.
    When i logged back in it said itunes was broken and i should run the repair tool. I tried and it said it failed and that I had to install the whole of itunes again!
    I went on the apple website and installed itunes for windows 7 64bit. Once this was complete i tried to open itunes and i now get a message saying that the file (or library) was created in a newer version so cannot open!??
    How can this be the case when I have just downloaded the newest version from the apple website!!!?
    If any can help that would be great as im left with no way to back up my phone or get the new ios5 on it!!
    I have windows 7.
    Thanks

    I did kinda the same thing....What I was told was that because the server is getting hammered right now, the itunes didnt install correctly ( even though it looks like it did ).  The only thing to do is uninstall and reinstall until it works.  I was told it may be at least a week with all the new phones coming out today... My phone doesnt work at all now - I have to take it to a store to get it back to factory settings and when the servers slow down and I can reinstall itunes correctly, then I can get all my contacts and apps back.

Maybe you are looking for

  • Problem Using Custom Classes in UCCX8.5.1 SU3

    Dear All, My team is facing problem in using Java custom classes for UCCX 8.5.1 SU3 The problem is that we have created some conditional prompts for currency in different languages, our custom java class contains two mathods GetEnglishString(paramete

  • Internet Sharing Ethernet to WiFi disables WEP password on Mac Network?

    Hi all, I have a curious problem, I'm trying to use internet sharing to share the ethernet connection to my iMac with my iPhone and iPad over wireless (no wifi where I live). I can create a network with WEP fine, name it whatever, encrypt it with wha

  • HT201272 Does anybody know how to locate and download my past music purchases?

    I want to know if there's a way to get my purchases from I tunes on my new phone

  • Any updates on Mac client RDP file issue

    I've seen various posts along with mine, but haven't found any response from Microsoft regarding an update to this. Is there a status on fixing the bug that prevents using an rdp file, at least when using a Gateway? Or at least a confirmation from Mi

  • NetWeaver 2004

    I'v installeld SAP Netwaver 2004 TRIAL on LINUX SLES 10 SP1 sometimes ago. Now, after downloading and installing GUI for JAVA  7.10r8 I'v tryed to run NetWeaver on the LINUX-box and GUI's on Windows-XP and  Linux too, but no luck. The startup-log for