Files stop rendering after a while! both in media encoder and direct export from timeline

hi there,
getting very frustrated here need to deliver a file but each time it stops rendering (each time at the same moment)
I tried several encodings (mpeg, H264, wmv) with the same disappointing results.
What i found out is that the first preset i used worked. (i rendered a waveform file for mastering in my audio software)
When starting te export a new file from the timeline you will see the latest preset you used (in my case windows media audio file)
then any following preset you choose won't work. Encoding will stop. When restarting the program and going back to the export menu will
show the first preset i had chosen (the only one that did work) which tells me that any other preset i choose won't work.
I tried several tricks (import timeline in another one, save copy project etc) non succesfull.
i work with PC/asus P6T SE/i7 - window 7 professional
hope anyone can help me with a workaround!
Frank
P.S. i succeeded to render the previous file with specific H264 setting using CBR in stead of VBR encoding but can not reproduce it so far!

hi Arjun,
no third party plug-ins used.
General
Editing mode: Sony XDCAM HD/EX 1080i (SP)
Timebase: 25,00fps
Video Settings
Frame size: 1440h 1080v (1,3333)
Frame rate: 25,00 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
Fields: Upper Field First
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Audio Tracks:
Audio 1: Standard
Audio 2: Standard
Audio 3: Standard
Audio 4: Standard

Similar Messages

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this?

One of my imported MOV files turns "black" after editing with it for a time and I can't retrieve the images. This has happened three times, only this file. The placeholder is still there. Files are fine on hard drive. What gives? how to stop this? is in final cut pro 10.1.4

X121e touch pad buttons stop working after a while

Hello everyone,
I have a lenovo thinkpad x121e.
The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
It is always the same routine. Rebooting windows, everything alright, stop working, ...
I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
Many thanks in advance.

Hi again, li-lup
I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Pavilion g6 sound stops working after a while

Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help.
System Details: HP Pavilion g6, Windows 8

HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault?

Hard drive stop spinning after a while

I have a Lenovo laptop, running Arch Linux + KDE. I noticed that when I am on battery, the hard drive stop spinning after a while, and it's very annoying to listen the disk starting again, and again. and again. I'm not interested in save energy with this, so how can I deactivate it?
I thought it was the laptop-mode, but I runned a systemctl status laptop-mode.service, and the service is inactive. Any idea of what could be triggering this?

man hdparm. Check out -B and -S flags. hdparm -B255 -S0 /dev/your_drive should disable any powersaving settings altogether.
You could use udev rule to run hdparm when you swithch to battery, but there are probably more elegant solutions as well.
KDE might handle this via its own power settings as well. I haven't really used KDE ever, so I'm not sure about this, but it's still possible.

Admin console stops responding after a while

We just upgraded to Weblogic 8.1.5 . We are having difficulties with the Administrator console. It stops responding after a while. There is no pattern. The restart seems to fix it but restart is very slow as it takes around 2 min to detect each server. So we have to wait for around 16 min (since we have 8 servers) for it to be operational again.
Has anyone seen this problem and can suggest a resolution to this problem.
Thanks
Pankaj Grover

I've never seen this and we've been running 8.1.5 for a while. Have you tried dumping threads to see what the admin server is doing? On UNIX, run 'kill -QUIT <admserv_pid>'. Can't remember if/how this can be done on Win32. I believe Console requests use the weblogic.admin.HTTP execute queue and it only has two threads. Could be that something is blocking those threads leading to this.
I would also look into why your admin server takes 2 minutes to discover your managed servers. That seems unseemly long to me. Mine takes a few seconds at most. Since the Console does cause the admin server to talk to the managed servers, these two things might be related. Maybe you've got some kind of network/DNS lag that could be eliminated.

TS3218 My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing h

My iPod Nano 6th generation fell one time and it kept working with a small crack in the screen.But after a while it just gave out and does not turn on.I try to charge it and all it does is blink the apple icon on and off.When disconnected nothing happens.

I am having the identical trouble as described above with my month old Macbook Air. I tried everything with the ditto results. Please help anyone!
Mine is a Macbook Air 13', 128GB, 1.86GHz with 4 GB RAM.

Was downlading a movie rental i purchsed after a while my internet got disconected and the download now has two errors and not succesfull download can you please help. :)

WAS DOWNLOADING A MOVIE RENTAL I PURCHASED AFTER A WHILE MY INTERNET GOT DISCONNECTED AND I AM TRYING TO SEE IT AGAIN. CAN SOMEONE HELP ME?

Erin I am sorry you are facing difficulty downloading the Creative Cloud software. It can be frustrating when you do not have access to high speed stable Internet.
You can attempt to download the base installers and updates by following the directions listed at:
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
You may want to attempt to utilize some form of download management as the main issue seems to be the stability of your connection.
There is not currently a method to resume downloads within the Creative Cloud Desktop application. There is download management included though it may not be enough to compensate for the current Internet connection. If you are curious you can find additional details on how to resolve download errors at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Exporting to Media Encoder and file locating issue

Ok, Now I've read a LOT of threads trying to find a solution to this but none of them have answered my problem exactly, so here's what I have:
Running a New computer with a clean install of Windows 7 64 bit and Adobe CS4 Master Suite
Hardware:
Dell Precision M6400
Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06 Ghz, 3.07 Ghz
12.0 GB Ram
Premiere ran fine for a while, but soon I've run into a problem where I try to export to the Media Encoder and I keep getting the error:
"Could not read from the source. Please check if it has moved or been deleted" over and over
I have deleted recently imported media one at a time to try and locate what's causing it since it wasn't doing this before, but no luck. So I restarted the program but now the Premiere project won't open. The task bar loads until about 2/3 in and stops there indefinitely, I've left and came back to it 2 hours later and it hadn't moved. I back tracked and found a previous save that will open, but it still will not export, it still says "Could not read from the source. Please check if it has moved or been deleted". And as soon as I update anything and save a new file that one will not open either.
I've tried recompressing each video file into a format I know works well with Premiere but still no difference.
This problem has plagued my workflow for a while now and I can't take it anymore. I've had to restart clean project files to try to work around it but I lose so much progress, and the work around by rendering the premiere file through After effects hasn't worked either. The error I get there says "Dynamic link server is busy".
Here's what the problem is not: It is not because I uninstalled CS3 or any other previous version, I've never had it on this computer. It's not a plugin problem, I don't have any plugins on this install except for the default ones that Came with Adobe Master Suite for Premiere Pro.
Someone please help me, this is ridiculous that I have had to trouble shoot the program this much. Both CS4 and Windows 7 have been around for over a year now and neither are in Beta Editions

Wow, sorry, forgive me if I've seen most forums work with a lot less, and your dismissiveness led me to assume you hadn't read my post.
All of this is new and up do date as far as Adobe and Windows updates go, that's Version 4.2.1.
My projects for this are all in NTSC Widescreen DV 24P, the particular sequence that I render from is in that format as well, although regardless of which one I use the problem keeps occurring.
My renders for my recent purposes have been compressed in .h264, IPOD video Large. The codec I'm rendering in also doesn't seem to matter, because I've tried this in .avi., .mov, .h264, .wav, etc. and all with various settings that I thought might help, but the encoder quits encoding 4 seconds in and gives me the error that it can't find the media.
And I didn't mention the media type and what not because it seems irrelevent of what I use this problem keeps happening. I'm pretty sure it's a problem with the project file or perhaps the media encoder or both.
And I don't know what you mean by "disks"
Do I have a Raid set up on my hard disk? No, I have two 0.5 TB hard drives, Programs on one (C:\) Projects on the other (D:\).
What address am I saving the scratch disks to? I use the default of "same as Project". Have I tried Clearing it? Yes.
I don't think I'm getting at what you're asking.
And I don't think I've ever used an .xlsm (which is excel?) file and I've definitely never used a Power point project (PPS?) file in my projects. And they open in their respective programs, although I'm not sure why you asked about that. Again I'm not sure I know what you mean.
The Premiere Project (.prproj) file is what I'm trying to open when the progress bar stops at 2/3 the way through and forces me to terminate the process with the task manager to close it.
It would help to mention that all my projects are animated and I use premiere to cobble them together, so no problems that relate to transferring media from a camera to the computer would apply here. Most of the files I get out of Maya are in Default .avi or .mov files, and I also use a handful of .wav files for the dialogue and .jpgs for cards and placeholders.
I believe that this problem began when I updated a few of the files in my project, but I've been doing that for weeks without incident. I've been updating them by saving over the old media file with the updated one of the same name, length, and type.
I don't work exclusively with Premiere, in fact it's not what I usually use, that would be Final Cut Pro.

Is there a way to apply LUTS to clips while in Adobe Media Encoder

is there a way to apply LUTS to clips while in Adobe Media Encoder? We have many camera clips needing luts applied then wrapped to ProRes422 for editing. right now we are using after effects, rendering out then wrapping in Encoder, but this workflow is quite time consuming.We've tried rendering proRes out of AE but the boss isn't happy with the results without also going through Encoder.

No, there is not a way to apply color changes (e.g., using LUTs) in Adobe Media Encoder. Do this in After Effects, but just add your After Effects compositions directly to the Adobe Media Encoder encoding queue (e.g., by choosing File > Add After Effects Composition in the AME UI).

My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

Hi Ronald ...
Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
And make sure the OS X software is up to date.
Click the Apple  top left in your screen.
From the drop down menu click: Software Update
If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

Adobe Media Encoder - Issue with exporting file

When I send a file to Adobe Media Encoder and I hit queue I get an error, "could not read from source file, please check if it has been moved or deleted".
The source file location that the AME is trying to use is C:\Users\User Name\AppData\local\temp\file name.prproj
Is this file location correct?
Why is not using my scratch disk file?
How do I change the file that AME is trying to use?
I have not been able to export a video since I have purchased Premiere CS4.
Any help with this would be greatly appreciated.

If you want a quick work-around do not try exporting from Premiere, just save and exit the project after you are through editing. Open AME and under File, select Add Premiere Pro Sequence, browse for your project file and click on it once--have patience Adobe's feedback here is lousy--your sequence will finally appear in the Sequence window, click on it and then click on OK. Select your Format,.Preset and Output location. If you want to tweak your settings just click on the Settings button. Then hit Start Queue.
Do you have the project on an external removable drive?

Content is not Panning while softkeyboard appears in GPU and Direct Mode (Adobe Air SDK 4.0.0.1390)

Hi,
My content is not panning while softkeyboard appears in GPU and Direct Mode(I have placed my input textfield at the bottom of the screen) it is working fine with the CPU and AUTO Mode. I am using Air sdk v 4.0.0.1390. I have checked my manifest file also and have added '<softKeyboardBehavior>pan</softKeyboardBehavior>' still it is not panning my content while keyboard appears.
Has anybody faced this problem earlier?
(On Android i am getting this problem on iOS it is working fine)

Could you please open a new bug report on this over at https://bugbase.adobe.com? When adding the bug, please include some sample code or a sample application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others effected can add their comments and votes.
Thanks,
Chris

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall. Help!

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!

If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore

Files stop rendering after a while! both in media encoder and direct export from timeline

Similar Messages

Maybe you are looking for