Files to backup ?

If someday my harddisk breakdown or my computer might get stolen, I would like to be prepared and backup the files, that are made when syncing with iTunes.
But where are these files ?
I have done a search, and I guess that they might be located here -
C:/Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
But I'm not sure. Is this the files, that I need to keep, in case of a breakdown or a stolen computer ?

Photos should be taken off your phone as described in the manual. You should NOT be keeping files in the camera roll forever, that is NOT what it is for.
The camera roll is like any other digital camera, YOU need to take files off, store on computer where you see fit. And if you want them on the phone, you sync them back via iTunes and the Photo tab options. Thus you need to backup the folder you store your photos in.
SMS data is in the backup data.
All this info is in the manual
http://support.apple.com/manuals/

Similar Messages

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files).

My iMac just crashed, and I had some documents open in Pages that were unsaved. Is there a temporary file or backup file that I can access as on a PC? (I have just looked in Timemachine which I had operating, but it did not seem to have any temp files in it at all - not sure what it would be useful for then).
Any suggestions?

Question asked and answered several times.
If you didn't save, nothing is recoverable.
iWork apps don't create temp files so, as far as you on't save something, Time Machine can't archive it.
Yvan KOENIG (VALLAURIS, France) mardi 5 juillet 2011 12:25:31
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

I upgraded to iTunes 10.5 and now I can't back up iTunes library to disc. In previous versions it was in file library backup to disc. In iTunes 10.5 that is gone!

I upgraded to iTunes 10.5 and now I can't back up iTunes library to disc. In previous versions it was in file>library>backup to disc. In iTunes 10.5 that is gone!

Some of us have our enture itunes library backed up on CD/DVD - what a waste of time and effort as now presumably you can't use these discs to restore itunes on a new computer! WHY NOT APPLE?
Very unimpressed with itunes 10.5/ios5 - wifi tracking apps have been removed from the store (and won't function in ios5), it's impossible to sync photos (I have spent a whole day trying to sync my iphone 3GS with itines 10.5) to no avail and now, no CD backup facility.
I have never had problems with apple before - I was thinking of upgrading my whole system from PC to Mac but now I am doubtful - if this is typical of apple software, I will stay with windows!

Monitoring File History / backups in Windows 8.1

Hi,
By tracking some events I was able to monitor Windows 7 Backups. By means of of schedule task triggered by the events belows.
Image Backup successful : Event log : Microsoft/Windows/Backup/Operational. Source : Backup. Event ID : 14.
Profile Backup successful : Event Log : Application. Source : Windows Backup. Event ID 4098
(BTW, the Microsoft/Windows/Backup/Operational log not holding all backup logging is a bit disappointing, to say the least.)
How can I monitor Windows 8 "File history" ?
I we keep the default "every hour" File History, the best approach is perhaps to track failures instead of success. Also because I haven't seen any event logged for a successful backup into the log : Microsoft/Windows/FileHistory-Engine/File history
backup log/Operational.
When I disconnect the backup device I get and Event ID 203 in there, though.
What are other event IDs related to a backup failure ?
Is there a configurable Action Center notification on backup failure ?

Hi,
Log files related to File History can be found in Applications and Service Logs -> Microsoft -> Windows. We found following two interesting event files:
WHC under FileHistory-Core
File History Backup Log under FileHistory-Engine
The entries of Information level in WHC appears whenever File History runs, stops, turns off or on. On the other hand, File History Backup Log records warnings or error messages, for instance, file was not backed up due to xyz error, unusual
condition was encountered during finalization of a backup cycle for configuration, unable to scan user libraries for changes and perform backup of modified files for configuration.
For more information about file history, you can refer to this link:
Windows 8 File History Analysis
http://articles.forensicfocus.com/2013/11/24/2869/
Hope these could be helpful.
Kate Li
TechNet Community Support

Is it possible to decrypt EFS files without backup certificate- windows xp,vista,win-7,win8

hi,
i have windows xp and and i did the format c:\ without take any EFS certificate backup ,is it possible to decrypt efs files without backup certificate , i have lot off files like Microsoft office and pdf , how can i recover the file and decrypt
Any software to decrypt the files , mostly word and excel files , any solution please let me know as soon ad possible.
Thx
PV

PV
If you formatted the entire "C" drive (Format C:\) then you don't need to decrypt them but rather recover them. Recovery is somewhat doubtful but one application you can try is called recuva.
You will not recover 100% of the files and may not recover any
http://www.piriform.com/recuva
Wanikiya and Dyami--Team Zigzag

Is possible control tape library slot 1 - 10 for file system backup

hi ..
i am new to osb , i just install and setup osb , i have a question as below , hope expert can help me
env: testing
rhel 5.5
tape library with 20 slot
file system backup
1. is possible osb only use slot 1 - 10 for file system backup ? amanda can control slot x - slot y for the configuration .
2. how do i label the tape for slot 1 - slot 10 by obtool ? how to control osb auto load the tape for next backup ? where to check the log say that next tape is tape-02 ?
thanks ..

hi dcooksey
how do i use list for a tape drive...for example, if you want tape drive A to only use slots 1-10 from obtool or webtool ?
becoz i new to backup solution & osb ( i always use ghost or acronis to clone the image ) , my thinking as below , pls correct me if i am wrong
slot 1 - 10 for daily backup
slot 11-16 for full system backup
slot 17 - 20 reserve ( this tape only use for full system backup before perform any application upgrade patches , )
daily backup mon - fri ( 2 week ) ( no backup on saturday and sunday ) , server application offline
full system backup friday ( 1 , 14 on calendar ) every 2 week perform full system backup after daily backup completed
for upgrade application ,
perform full system backup after daily backup , then release the server to application team to perform upgrading .
so how to set my media family for the above setting ? the slot configuration is control by media family ?
hope you can help ...

File System backup and restore command

Hi All,
I require File System Backup and Restore command in AIX to Trivoli Storage Manager.Please send me the commands.
Thanks in Advance
Regards,
Soumya

Please check this out
Restore
http://www.ahinc.com/aix/backup.htm
restore -xvf/dev/rmt0 Restores all the files located on the tape device that were backed up using the backup command.
Backup
http://publib.boulder.ibm.com/infocenter/systems/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds1/backup.htm
Hope this will help you.
Regards
dEE

FILE SYSTEM BACKUP IS HANGING ON OSB

Hi all
i am having a test setup for OSB ( using windows 2003 ent 32 bit , administrative server + mediaserver ) , i am using HP c1537a scsi Tape drive ( driver details Microsoft 10/1/2012 version 5.2.3790.0 ) , and while firing the file system backup the job is getting hanged on the webtool,
i am attaching the logs
WEB TOOL LOG
admin/5.1
Type     backup osb-server
Level     full
Family     FS-BKP-MF
Encryption     off
Scheduled time     04/19.11:29
Introduction time     2012/04/19.16:59
Earliest exec time     04/19.11:29
Last update time     2012/04/19.17:23
Expire time     never
State     running since 2012/04/19.17:23
Priority     100
Privileged op     yes
Run on host     osb-server
Requires     host osb-server and family FS-BKP-MF and any device
Attempts     2
Log
     2012/04/19.16:59:49 Job created.
     2012/04/19.16:59:49 Dispatching job to run on administrative server.
     2012/04/19.17:04:03 Drive or volume on which mount attempted is unusable.
ob> lsdev
drive tc-tape in service
ob> pingd tc-tape
Info: drive tc-tape accessible.
ob>
ob> lsdev -lg
tc-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Automount: yes
Error rate: 8
Query frequency: 1024KB (1048576 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
UUID: 26934f4f-fe7b-49ce-a3ed-034a7c9ad046
Attachment 1:
Host: osb-server
Raw device: //./obt0
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: C1537A
Firmware: L111
Tape state: online, write protected
Hardware compression: on
Last read was: compressed
Hardware encryption: not available
Maximum block size: 61440
Remaining tape: 3615300 (uncompressed) blocks (3.70GB)
ob>
please guide me resolve this issue ..
Regards
ASA
Edited by: 927832 on Apr 19, 2012 5:10 AM

Hi Rich
Thanks for your reply.
since i am using a stand alone Tape drive, we will not able to take the inventory , isn't it ?
i hope that my media family parameters are correct only .please find the media family details below.
media family name :- test-media-family
volume id used :- unique to this media family
volume expiration :- 3 years
appendable :- yes
rotation policy & volume duplication policy are ;- none
====================================
While i am mounting the Tape to the drive is gives the following error
ob> mountdev -w test-tape
Error: can't mount volume in test-tape - timed out waiting for bot
ob>
Edited by: 927832 on Apr 20, 2012 3:04 AM

Just deleted an important file from backup. How do I retrieve it?

Just deleted an important file from 'Backup' in 'Finder'. How do I retrieve it?

Thank you for using the Apple Support Communities
From what I understand is that you deleted a backup file. Could you describe your problem with a little more detail please.
-Zeph

How to recover DB2 using offline file system backup.

Gurus,
I had a problem with my BI PRD's database. 1 of my BI consultant accidently deleted some important 2010's data. We've try recover online database backup of BWP into BWQ and retrieve the missing data. However the backup retention period was expired and we dont have any available online backup now.
Only hope is my offline file system backup which backup the whole file system of BWP ONLY.
My question:-
Can i restore the file system (offline backup) into BWQ and rebuild my DB2 in BWQ. Please enlighten me.
Thanks,
Devan.

Hi
You can do it .The file system backup image can be mirroed into production system and by making using of "db2inidb" utility you can restore the whole database.
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/core/r0004473.htm
Thanks
Romansh

OS File System Backup

Hi,
Apps: 12.1.3
DB-11gR1
OS - RHEL 5.6
How i can take OS file system backup manually?-
which is the best mothod?
I know, we can use tar?
could anyone tell me which is the best method..
Thanks
KSV.DBA

In addition to the link mentioned above, do you have to rely on free solutions, or do you have a budget for a solution?
You can perform a complete OS level backup of your Oracle database when it is shutdown, or put the database into online backup mode, but need to review the Oracle documentation for limitations. The tools of choice for Oracle is RMAN, which does not require extra logging or backup mode.
You can use tar or rsync if you prefer to backup data to a shared storage through NFS or use tar to stream the data to an attached tape drive. There is plenty of information and tutorials on how to perform incremental backups on the web, and here tar incremental backup

Oracle Database Point intime recovery with File System backup.

Hi.. Experts...
We have shutdown the database and have take a file system backup on
09.10.2010 @ 10 AM.
We started the database and all the archive logs generated after that are already
available in archive directory till now.
We discovered there were some deletions took place. Yesterday evening at 4 PM.
Requirement.
We want to recover the database till yesterday 3.30 PM.
Can any one send steps to recover with above backup and available archive logs till 3.30 PM Yesterday.
Regards

Experts.....Nick Loy, Varadharajan M, Mark & Volker.............Thanks U Very Much.
TAIL END MESSAGE OF RECOVERY COMMAND
ORA-00279: change 11331655931 generated at 10/10/2010 11:30:56 needed for
thread 1
ORA-00289: suggestion : /oracle/D10/oraarch/D10arch1_123487_607825009.dbf
ORA-00280: change 11331655931 for thread 1 is in sequence #123487
ORA-00278: log file '/oracle/D10/oraarch/D10arch1_123486_607825009.dbf' no
longer needed for this recovery
Log applied.
Media recovery complete.
SQL>
SQL>
SQL> ALTER DATABASE OPEN RESETLOGS;
Database altered.
SQL>
SYSTEM RECOVERED TO DEMAND & RELEASED
T H A N K S -- T O -- E V E R Y O N E .
RGDS

HT5262 My first time backing up my iPhone 4. I cannot find the page on my computer that shows File Device Backup. I need step-by-step

My first time backing up my iPhone 4. I cannot find the iTunes page on my computer that shows File>Device>Backup. I need step-by-step instructions, please!

Hey Jilleemay,
Thanks for the question. You may need to enable the iTunes menus for Windows:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
To do so, press Control-B on your keyboard. You should then see the menubar at the top of iTunes (see image below). You can then access the File menu and backup your device.
Thanks,
Matt M.

Duplicate node in configtool.sh after files sytem backup / restore

Hello,
We are doing EHP4 installations for our live ECC6 (ABAP+Java) landscape. We wanted to achieve EHP4 installation more consistently and accurately in our test system first. We are performing system copy from our Production system (sapecp) to TEST system host (sapecb) using full file system backup and restore.
We have restored most recent full file system backup of our PRD(sapecp) on our TEST System (sapecb). Due to the different host name of test system we aslo finished the host renaming steps from note 8307 and 757692. Our DBAsu2019 also adjust the new
host name in Oracle after the file system restore. After this we are able to start SAP instance successfully on TEST system.
However we have noticed that configtool.sh is now showing two nodes automatically instead of a single node in both PRD and TEST systems.
Q: Is their anything else we still need to change in configtool.sh in our TEST system to remove references of PRD ?
Q: is this a normal behavior of configtool.sh after a file system backup and restore ?
Q: is their a way to clean up the configtool nodes in both system ?
Please advice if anyone has faced the similar issue ?
Thanks,
Harshal

Dear Reagan,
Infra team did only the Backup Restore of the Prod system and no Export Import of Prod using the sapinst.
Should I do the export import as it sounds by your and Pavan's reply that it might be required
We are doing Restore for Dual stack first time done the backup restore for ABAP stack a couple of times for ECC Quality refresh.
Should this be the option that I should select in sapinst for JAVA Export and JAVA Import:
JAVA Export
JAVA Import
Regards,
APS

HT3275 I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

Verify the backup.
Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
A5 http://pondini.org/TM/Troubleshooting.html
make sure the disk is available and online..
But if it is not working.. then you will have to wipe and start again.
http://pondini.org/TM/Airport.html
If this is not TM then also verify the source disk.

Files to backup ?

Similar Messages

Maybe you are looking for